Performance - Audi SQ2 (2017-Present)

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!

Read more less

High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!  

Read more less

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

Fits GPF models only. Sports Cat option includes 4.5" (114.3mm) 200 cell high flow sports catalyst. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. The sports cat option has been designed with a 4.5 in/114.3mm 200 cell high flow sports catalyst, maximising the flow rates and optimising the tuning potential of Audi's high performance compact SUV. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sport catalyst version replaces factory emissions devices and is not EC homologated. This may not meet current emission laws for road use in your territory. Please note: IMPORTANT: This exhaust removes the PPF (Petrol Particulate Filter) and will require engine tuning at time of fitment to cancel the EML light. Please note: This product fits to O/E Cat Back exhaust only. Fitment is for motorsport and off road use only as this system removes the PPF filter. Media British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video.

Read more less

Want to tighten your grip on the road? Scorpion’s lightweight aluminium chassis braces tick all the boxes. The single-piece manufacturing process ensures a high-strength connection under load. Braces are powder-coated black and etched with the Scorpion mark.Our underbody bracing reduces performance loss due to chassis twist during hard braking or cornering. Enhanced body rigidity translates to a more direct feel with the road surface. (Fits both the Scorpion and OEM pipework.) FITS: AUDI  RS3 8V Saloon/Sedan 17-18 Non-GPF Model RS3 8V Saloon/Sedan 19-20 GPF Model RS3 8V Sportback 15-17 PFL RS3 8V Sportback 17-18 Facelift Non-GPF Model RS3 8V Sportback 19-20 Facelift GPF Model S3 2.0T 8V (3 Door & Sportback) Facelift GPF Model S3 2.0T 8V (3 Door & Sportback) Facelift Non-GPF Model S3 2.0T 8V (3 Door & Sportback) PFL S3 2.0T 8V (Saloon) Facelift GPF Model S3 2.0T 8V (Saloon) Facelift Non-GPF Model S3 2.0T 8V (Saloon) PFL S3 2.0T 8Y Quattro (Saloon) GPF Model S3 2.0T 8Y Quattro (Saloon) ROW S3 2.0TFSi 8Y Quattro (Sportback) GPF Model S3 2.0TFSI 8Y Quattro (Sportback) ROW SQ2 19-24 TT MK3 2.0TFSi Quattro Non GPF Model TT RS MK3 GPF Model TT RS MK3 Non GPF Model TT S MK3 Coupe Non-GPF Model CUPRA Formentor 2.0 TSI 4Drive Leon 245 GPF Model Leon 245 ROW Ateca SEAT Leon Cupra 2.0 TSI 280, 290 & 300 Non GPF Model Leon Cupra 2.0 TSI 280/290 ST Leon Cupra 2.0 TSI 290 GPF Model Leon Cupra ST 300 4Drive (GPF Model) Leon Cupra ST 4Drive Carbon Edition SKODA Octavia vRS 2.0 Tsi VW MK7 Golf Estate R (pre facelift) MK7 Golf GTi (including Clubsport & Clubsport S) MK7 Golf R (pre facelift) MK7 GTD MK7.5 Golf Estate R (facelift) GPF Model MK7.5 Golf Estate R (facelift) Non GPF Model MK7.5 Golf GTi (Non-GPF Model) MK7.5 Golf GTi (TCR & GPF Models) MK7.5 Golf R (facelift) GPF Model MK7.5 Golf R (facelift) Non GPF Model MK8 Golf GTI Clubsport GPF Model MK8 Golf GTI Clubsport ROW MK8 Golf GTI GPF Model MK8 Golf GTI ROW MK8 Golf R GPF Model MK8 Golf R ROW

Read more less

Valve delete module - plugs into exhaust valve plug when a vehicle is fitted with a none valved system Please note, this product fits multiple models. Cupra Ateca S3 2.0T 8V (3 Door & Sportback) PFLS3 2.0T 8V (Saloon) PFLMK7 Golf R (pre facelift)RS3 8V Sportback 15-17 PFLTT S MK3 Coupe Non GPF ModelMK7.5 Golf R (facelift) Non GPF ModelMK7.5 Golf R (facelift) GPF ModelSQ2 19-24MK8 Golf R GPF ModelS3 2.0TFSi 8Y Quattro (Sportback) GPF ModelFormentor 2.0 TSI 4DriveS3 2.0T 8V (Saloon) Facelift GPF ModelS3 2.0T 8V (Saloon) Facelift Non-GPF ModelS3 2.0T 8V (3 Door & Sportback) Facelift Non-GPF ModelS3 2.0T 8V (3 Door & Sportback) Facelift GPF ModelS3 2.0T 8Y Quattro (Saloon) GPF ModelS3 2.0TFSI 8Y Quattro (sportback) ROWS3 2.0T 8Y Quattro (saloon) ROWMK8 Golf R ROW

Read more less

Racingline Billet Underbody Tunnel Braces Want to sharpen up your MQB handling responses? MQB Billet Underbody Tunnel Braces mount under the body to help fight body flex. This improves rigidity to help refine the handling, whilst also providing valuable extra clearance for larger diameter exhaust system. What do they do? MQB cars rely on thin stamped-steel OE tunnel braces underneath in an attempt to reinforce the body’s weaker points and limit chassis flex under demanding loads. Our new Billet Underbody Braces replace these weak braces with intricately machined aluminium replacements, greatly improving stiffness, giving much better exhaust clearance and even look great! CNC Machined from a solid billet of 6061-T6 Aluminium, each brace has been engineered to remove unnecessary material whilst still increasing rigidity. With any 3″ diameter exhaust system, the OE brace gives insufficient clearance. So rather than removing the tunnel brace, our new Rear Tunnel Brace at last gives you the option to replace it, giving you the clearance you need plus maintaining crucial body stiffness. Despite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The brace designs mean that installation is simple, using existing body mounting points with no drilling or trim removal required, ensuring fitment is completely reversible. We offer two braces – a Centre and a Rear Tunnel Brace. Owners of FWD cars can fit both, AWD cars can only fit the Rear Tunnel Brace. Looking to fit a larger bore Exhaust System? For large diameter aftermarket exhausts, there simply isn’t clearance space above the factory tunnel brace. Many owners have no choice but to remove the brace. But the brace is there for a reason. With the extra clearance our Rear Tunnel Brace gives, you can now maintain strength and fit your bigger exhaust. VWR810005 – Rear Tunnel BraceVWR810004 – Centre Tunnel Brace (Front-wheel drive only)

Read more less