Performance - Audi SQ2 (2017-Present)

A must have for R600 intakes, Racingline Underhose Our new R600 Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look. Includes a factory one-way valve incorporated, just like the original; don’t run your car without this valve! CONFIRMED APPLICATIONS VWR17 G7R600 FOR CARS WITH R600 FITTED > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Ateca 2.0 TSI 190hp 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ > Skoda Kodiaq 2018+ > Skoda Kodiaq 2.0 TSI 190hp 2018+

Read more less

2.0 TSI EA888 gen.4 ContinentalTurbo Inlet SystemTurbo 90 Inlet & Silicone Inlet Hose.For VW, Audi, Cupra 'higher output' 300/310/320PS (Continental turbo)  Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo.For the Continental turbo (higher output) 300/310/320PS engines such as Golf 8 R, Golf 8 GTI CS, Tiguan R, Audi S3 8Y & Cupra Leon & Formentor and many more.   What the turbo inlet system does.  Our new Turbo Inlet System for the 300-320PS MQB 'EVO' cars such as Golf 8R, GTI CS, Audi S3 8Y etc is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo. The factory inlet forces the airflow to pass through the restrictive plastic 'bellows' pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet - in other words, terrible for flow.  The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow. The internal diameter of the Turbo 90 Inlet is massively increased from 74mm on the factory part right up to 84mm. It's by combining the two parts of the kit that's allowed us to enlarge the diameter of both the Inlet and the Hose so much - and so give the maximum possible gains. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade! TWO PIECE KIT It's only by combining both elements of this kit that we've been able to increase the diameter so significantly (+10mm) to release the true airflow gains.  POWER GAINS The ultra-thin wall High-Flow Turbo 90 Inlet features an internal velocity stack to maximise airflow capability through to the turbo's inlet. EASY FIT Fitting is straightforward. The kit is installed in around 30minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered for perfect performance.  Reinforced high quality silicone prevents deformation under load or heat Flexible enough to allow just the right amount of engine movement under load Internally-stepped silicone to ensure smooth transitions CNC constructed from T6-6061 aircraft grade aluminium with Viton sealing O-ring Maximum 88mm outer diameter with ultra-thin wall 2mm tube, smoothed internal bore Polished then anodised in gloss black to look good, and stay looking good. CONFIRMED APPLICATIONS For MQB Evo cars with the 300-320ps EA888.4 (Continental turbo) engines:VWR120010 For Tiguan R ONLY with the 320ps EA888.4 (Continental turbo) engines:VWR120012 > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW T-Roc R 2.0 TSI EA888.4 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y 2020+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 (facelift EA888.4) 2021+ > Cupra Leon IV 300 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Skoda Superb III 3V 2.0 TSI (facelift EA888.4) 2021+

Read more less

Upgraded Boost Hose Kit.For all VWG MQB 2.0 TSI EA888 gen.3 & 3B. Internally wired, stepped internals, reinforced silicone. The RacingLine Boost Hose Kit for 2.0 TSI MQB smooths airflow and optimises routing - for more effective performance in high boost, high temperature use.  What do they do? Welcome to the ultimate Boost Hose Kit for 2.0 & 1.8TSI MQB vehicles. The RacingLine Boost Hose package replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels.   By minimising restrictions, the smoother airflow and optimised routing ensures the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence  Direct OEM replacement: simply remove the old weak, flexible rubber hoses and replace them with our five-piece kit Pressure tested far beyond the turbo’s capabilities, the system maintains performance under extreme temperature and high-boost conditions  Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus non-stepped designs Five piece kit: The RacingLine Boost Hose Kit is probably the only one on the market which comes with five hoses included - however you'll only need to fit four of them.  ​ The choice of which Turbo Outlet Pipe (4a & 4b) depends on whether your car is pre- or post-2017. It's really easy to choose which to use, as it's either long or short depending on what OEM pipe you remove meaning that (unlike other kits) you can't really get this wrong! 1. INTERCOOLER INLET 2. INTERCOOLER OUTLET 3. THROTTLE BODY 4a. turbo outlet pre 2017 4b. turbo outlet after 2017 PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Constructed from internally-wired reinforced high quality silicone, guaranteeing great rigidity to prevent deformation under high boost or heat loads Fluorosilicone interior surface resists oil and gasoline permeation providing extra protection against deterioration  Stainless steel Mikalor-brand clamps reduce the risk of boost leaks with increased connection strength and decreased hose slippage Multi-ply silicone outer construction is hand-wound for performance under extreme conditions, ensuring both heat and burst resistance      INTERNALLY-WIRED INTERCOOLER HOSES Within the kit, our unique super-strength Intercooler Boost Hoses have steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.  CONFIRMED APPLICATIONS 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines ​ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

This reinforced silicone intake hose fits the 2 litre turbo Mk7 Golf, Seat Leon Cupra 280R and Audi S3 2.0l TSI (8V Chassis). Due to its location it really improves the looks of the engine compartment and removes any restriction of the OEM plastic hard pipe.  These are available in red, blue or black. Please select your choice in the options above when ordering. This part is also compatible with our turbo inlet adapter, FMTIA1 The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* The hose has an inner diameter of 70mm and 80mm  *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This kit comprises of four silicone hoses . These hoses will withstand greater temperatures and pressures compared with the OEM hoses and they look fantastic.   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* FITS: AudiA32.0 FSiTS32.0 TSI (8V Chassis)SQ22.0TSI (2018-2021)TTMk32.0 TSI 2015 OnwardsTTSMk3 8S (2014-2021)CupraAteca(up to 2020)SeatLeonMk3 2012-2020Cupra 280/290/300RSkodaOctaviaVRS 2.0 TSI 2013 OnwardsSuperb2.0TSI 220 BHP280 4x4 DSGVolkswagenArteon(2017-2020)2.0 TSIGolfMK71.8 TFSIGTIGTI Clubsport ED40RMK7.5GTI RJettaMK7 (2018-2021)2.0 GLIMK7.5 (2021-)2.0 GLIPassat2.0 FSiTT-Roc2.0 2018-2021Tiguan2.0 TSI 2017 Onwards   *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

2.0 TSI High Flow Turbo Inlet Hose.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3 & 3B Flow that airflow smoothly from your intake into the turbo. What theTurbo Inlet Hose does. The RacingLine High-Flow Turbo Inlet Hose is for all MQB 2.0 and 1.8 TSI EA888 gen 3 cars. The reinforced Silicone Inlet Hose has been engineered to increase air flow through to the turbocharger as the perfect compliment our R600 Cold Air Intake or even the standard airbox.   A simple fitment, it replaces the entire restrictive rear factory plastic ‘bellows’ pipe between the airbox and the turbocharger inlet.  The large diameter smooth-flowing silicon hose, crucially with enough compliance to allow for adequate engine movement without causing damage to the intake.  Back-to-back comparisons with the factory pipe on our flow bench reveals an impressive improvement in airflow, and makes this hose a great compliment to the R600 intake. Put simply, you'll be wasting a chunk of the hard-gotten gains from your high-flow intake system if you leave this pipe standard. COMPATIBILITY The Turbo Inlet Hose is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS By taking away the standard plastic bellows pipe's restrictive and turbulent airflow path between the intake and the turbocharger, the High-Flow Turbo Inlet Hose gives a worthwhile power gain. EASY FIT Fitting is very straightforward. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish.   PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Constructed from reinforced high quality silicone, our hose offers great rigidity to prevent deformation under load or heat. The engine moves considerably under load and so our turbo inlet hose allows just the right amount of flex.  Maximum diameter ultra smooth, high-gloss silicone with  smooth transitions promotes airflow. CONFIRMED APPLICATIONS 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines ​ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ Reinforced silicone elements embedded in critical areas to avoid compression under load.

Read more less