Performance - Audi TT MK3 8S (2014-Present)

Introducing the Awesome x Forge Wheel Spacer and Bolt Kits! Wheel spacer and bolt kits to suit your 5x112 / 57.1mm VAG vehicle for a quick and easy solution.These kits are designed to work with Genuine OE Alloy Wheels and come with the Wheel Spacers and the correct wheel bolts to suit. We highly recommend that you measure your vehicle fully loaded to see what size spacers are required. Notes: - Wheel spacer sizes should be carefully considered- Wheel bolts included use the standard 17mm Hex, so no need for any special tools- Designed to work with Genuine OE Alloy Wheels - May not be compatible with Aftermarket Alloy Wheels- Wheel bolts should be tightened to 120nm (88.5lb/ft) and rechecked after 25 miles. 

Read more less

Revo Torque MountMore power results in more movement during aggressive acceleration. The stock torque mount is designed to offer comfort over performance and does not manage engine movement effectively. Designed to significantly reduce the loss of torque and drastically improve traction and acceleration, the Revo Torque mount has little to no effect on vibration and harshness levels (NVH) felt in the cabin. Key Features Dramatically reduce drivetrain movement Improved acceleration and torque Simple and easy to install with tool included Doesn't require sub-frame removal for installation Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting Kit A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. This allows the OEM part to be removed and the Revo part to be installed without removing the sub-frame, reducing installation time and the need for axle re-alignment. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructions Download the Revo MQB Torque Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull Mount Kit available, including Engine, Transmission and Torque mount Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Revo Engine Mounts More power results in more movement during aggressive acceleration. The stock engine mounts, designed to favour comfort over performance, fail to manage axle hop and torque effectively requiring you to ease off in order to gain traction. Designed to significantly reduce this engine movement, Revo engine mounts use Dual Durometer technology to minimise noise, vibration and harshness levels (NVH) while drastically improving traction and acceleration. The engine, transmission and torque mounts have been CAD designed to offer OE quality fitment with the performance benefits and quality of a Revo product. Key Features Dramatically reduce engine movement Improved acceleration and torque Dual Durometer Technology Comes with removal tool for torque mount Engine & Transmission Mount The primary design goal of the engine and transmission mounts was to provide a management system for engine movement during vehicle operation with increased power/torque, in order to retain vehicle acceleration and tyre contact during aggressive driving. The aforementioned solution must also continue to dissipate the NVH naturally created by the drivetrain. To accomplish this, the bushing design of past Revo engine mounts was retained in the MQB engine and transmission mounts, allowing Revo engineers to focus their efforts on bushing stiffness/type to accomplish the task. Torque Mount Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting the mount does not require the sub-frame to be removed, reducing installation time and the need for axle re-alignment. A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. Materials, Manufacturing & Fitment Effective design and fitment plays a principal role in managing engine movement to ensure optimal acceleration and tyre contact with the road while dissipating NVH experienced from the drivetrain. Each component has been designed using CAD technology to ensure precision fitment and is supplied with class 12.9 hardware to replace the standard fixings. To ensure optimum strength and durability, brackets and housings are CNC machined from 6061-billet aluminium and finished with an anodised coating to protect from heat and corrosion. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructionsDownload the Revo MQB Engine Mount Instructions HERE Fitting instructionsDownload the Revo MQB Torque Mount Instructions HERE Fitting instructionsDownload the Revo MQB Transmission Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull kit includes engine mount, transmission mount , torque mount and torque mount installation tool Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards

Read more less

The APR Billet Stainless-Steel Dogbone / Subframe Mount Insert limits driveline movement, which helps to minimize wheel-hop and torque steer. This provides a more direct driving experience by eliminating slop in the driveline and does so without introducing excessive or uncomfortable driveline vibration and noise. The APR insert is created from thick, billet, stainless-steel. All mounts will slightly deform under use, but unlike all other units created from rubber, polyurethane, and even billet-aluminum, the APR unit will not heavily deform to the point of failure. Rest assured this simple upgrade will last the test of time, unlike others, and packs a limited lifetime warranty against cracking! We offer the mount in two different configurations depending on the style of your factory mount. Be sure to check your subframe mount before purchase. FITS: Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/RS3 (8V) Shop By Car/Audi/TT RS (8S) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)

Read more less

** Catalogue Images may differ from delivered product ** All new PERFCO premium wheel spacer Fits: 100 / 200 (C2/C3/C4) - 80 / 90 (B4 5 torn) - A3 / S3 / RS3 (8P/8V) - A4 / S4 / RS4 (B5/B6/B7) - A6 / S6 / RS6 (C4/C5/C6) - A8 (D2/D3/D4) - TT / TTS / TTRS (8J/8S) - R8 (42) ('06-'16) / (42) ('16+) FRONT - Q2 (GA) ('16+) - Q3 incl. RS (8U) ('11+) Literally putting our name on the line, we had to ensure we offer a premium product. Our Perfco Performance spacer kits are manufactured in Italy, machined from billet aluminium and feature a black anodised finish. European manufacture not only helps us to ensure European quality, but it also allows better supplier communication and lead times on specialist orders, which in turn allows us to offer improved service to you. Kits come complete with extended wheel bolts / wheel nuts (where required). We are also able to supply extended locking wheel nuts to simplify the buying process for you. Perfco Performance premium wheel spacer kits cater all popular applications from Audi to Volkswagen

Read more less

The CTS MQB Rear Subframe Mount Insert Kit is designed to improve the responsiveness of the rear suspension and differential for the MQB Platform. MQB Audi/Volkswagens come equipped with Haldex AWD and use rear subfame mounts made of rubber. When driven at the limit these can cause the rear end to feel sloppy. This kit is engineered to fill the voids in the factory mounts while limiting vertical movement. This maintains the rear geometry of the rear suspension allowing for better cornering and a more responsive driving experience. We highly recommend replacing the factory torque-to-yeild bolts when installing these inserts.  Included:2 x CTS Billet Aluiminum MQB AWD Rear Subframe Insert (Front)2 x CTS Billet Aluiminum MQB AWD Rear Subframe Insert (Rear) Optional:4 x Rear Subframe Stretch Bolts (recommended)Fitment for MQB platform with Haldex 4Motion/Quattro: Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes

Read more less

FULL ALIGNMENT. KEEP YOUR ALIGNMENT WHERE IT SHOULD BE. Our new MQB RacingLine Subframe Alignment Bolt Collar kit cuts out the huge factory tolerances for accurate alignment each time, every time. WHAT'S THE PROBLEM? The RacingLine Alignment Bolt Collar kit is a simple ‘why not’ upgrade to eliminate the challenges caused by large tolerances in the factory subframe mounts, both front and rear.   The OEM subframe design uses really oversized bolt holes – giving a wide range of adjustments to shuffle the whole subframe assembly back and forth, side to side.   Whilst that may be ideal for dealers & repairers to lazily mask other misalignments in the chassis, it means that there are also huge opportunities for inaccuracy every time your subframes are refitted, not to mention the risk of the car’s alignment creeping out of tolerance with hard driving over time. WHAT IT DOES. Our precision-engineered, push-in Bolt Collars centralise the subframes by cutting out the huge hole tolerances, so perfectly centring the bolt locations every time you refit. The result? With correct alignment, you’ll keep precise steering, sharper handling and braking responses every time. By ensuring complete accuracy every time you refit your subframes, you’ll save time and cost by ensuring consistent, hassle-free alignment each time, every time.  With no need for alignments after refitting subframes in future, this really affordable upgrade will likely pay for itself many times over. No additional NVH transfer into the car and no more creaking mounts. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Full kit of 16x Bolt Collars for front and rear subframes High quality T6061 billet aluminium construction CNC construction, anodised gloss black to last Precision machining means tighter alignment specs  Simple, quick push-in fitment into OEM subframes No modification to subframe or car body is required, so fitment is completely reversible. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq vRS 2018+

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

ADJUSTABLE REAR DROPLINKS. RACE-PROVEN FOR YOUR ROAD CAR. The RacingLine Adjustable Rear Droplinks are an essential upgrade to any lowered or performance car WHAT THEY DO. Our Rear Sway Bar End Links replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminium billet replacements.Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar. Each heavy-duty, high-articulation rear droplink attaches the rear anti roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminium links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar. As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage cars. Fully adjustable by +/- 5mm to zero the pre-load on the anti-roll bar geometry. Clever design means that adjustment can be carried out at both ends whilst the droplinks are in-situ, making neutral positioning much easier.  Direct replacement – can be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time. ADJUSTABLE When you lower ride height, the geometry will now be adding preload to your anti roll bar. It's vital to adjust this back to neutral with the +/- 5mm adjustment built-in. PRECISE Solid, motorsport-spec ball joint ends mean much more direct response when turning in to corners. Increase durometer rubber bushing creates direct response for anti-roll bar under cornering conditions RACE-PROVEN Developed for our race cars - adjusting out the sway bar preload allows the anti roll bar to work within its correct operating envelope is an essential part of geometry set-up. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Motorsport-specification ball joint ends - high strength teflon-lined steel +/- 5mm of adjustable length with stainless steel insert to zero Anti Roll Bar preload  Increase durometer rubber bush to create direct response for anti-roll bar under cornering conditions Rubber dust boots fitted to protect the joints  Left / Right threaded ends make for easy length adjustment in-situ without having to detach and re-attach Lightweight CNC-machined 6061-T6 Aluminum bodies with beautiful gloss black anodised coating CONFIRMED APPLICATIONS VWR520000 (supplied as a pair) > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+

Read more less

Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed!These CNC machined precision alloy wheel spacers are 8 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub. These spacers are suitable for most vehicles produced by Volkswagen Group. A 8mm spacer will give an overall track increase of 16mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not suppliedPlease note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are 13 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub. These spacers are suitable for most vehicles produced by Volkswagen Group. A 13mm spacer will give an overall track increase of 26mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   In The Box:2 x FMWS13 13mm Wheel Spacer1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Type A This precision-machined bush insert has been carefully designed to reduce the range of movement in the OEM Lower Dogbone bush that counter acts engine movement under heavy acceleration and braking, resulting a firmer feel when shifting. To be sure that you have selected the correct bush insert for your vehicle please check the fitment guide below: CNC Machined from a single billet of aluminium alloy. All Forge machined parts go through a rigorous quality control procedure to ensure that they have been made to the highest standard (working to a tolerance of less than 0.1mm). With a hardwearing black anodised finish which protects the part from oxidation to ensure it looks its best for longer. Developed in house at our Gloucester R&D workshop with working prototypes 3D printed and test fitted. Part of a wider range of bush inserts Forge currently have in development, please see the Forge Motorsport website for details. *When fitting please Torque to 135 Nm If your vehicle has this bush (part number : 5Q0 198 037 B) fitted  you need a type “A” insert, part number FMAM-B2 If your vehicle has the alternative bush (part number: 5Q0 198 037 C) fitted you need type “B” insert, part number FMAM-B3   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised. ----------------------------- Type B This precision-machined bush insert has been carefully designed to reduce the range of movement in the OEM Lower Dogbone bush that counter acts engine movement under heavy acceleration and braking, resulting a firmer feel when shifting. To be sure that you have selected the correct bush insert for your vehicle please check the fitment guide below: CNC Machined from a single billet of aluminium alloy.  All Forge machined parts go through a rigorous quality control procedure to ensure that they have been made to the highest standard (working to a tolerance of greater than 0.1mm). With a hardwearing black anodised finish which protects the part from oxidation to ensure it looks its best for longer. Developed in house at our Gloucester R&D workshop with working prototypes 3D printed and test fitted. Part of a wider range of bush inserts Forge currently have in development, please see the Forge Motorsport website for details. *When fitting please Torque to 135 Nm If your vehicle has this bush (part number : 5Q0 198 037 B) fitted  you need a type “A” insert, part number FMAM-B2 If your vehicle has the alternative bush (part number: 5Q0 198 037 C) fitted you need type “B” insert, part number FMAM-B3 We advise customers to carry out a visual check before ordering the VW Golf Mk7 bush insert as the dogbone bushes are interchangeable and can be retro fitted. FITS: A31.4 TSI/TFSI 2015 Onwards (8V)1.8/2.0 TSI 2015 OnwardsQ21.4 150BHPRS38V 2015-20178V Facelift 2017-20208Y 2021 OnS32.0 FSiT (8P Chassis)2.0 TSI (8V Chassis)TTMk32.0 TSI 2015 OnwardsTTRSMk3 8S (2017-)TTSMk3 8S (2014-2021)CupraFormentor2.0 TSI (245 BHP)SeatLeonMk2 2005-2012Cupra 2.0 TFSiMk3 2012-20201.2 TSI 2014-2020SkodaKodiaq1.4 150BHPSuperb1.4 150BHPVolkswagenArteon(2017-2020)1.4 eHybrid(2020-)1.4 eHybridGolfMK71.2 TSI1.4 TSI 125BHP/138BHP/150BHPGTEGTIGTI Clubsport ED40RMK7.51.4 TSI 138BHP/150BHPGTI RMK8GTIJettaMK7 (2018-2021)1.4 TSI2.0 GLIMK7.5 (2021-)2.0 GLITiguan 1.4 150BHPTouranII 1.4 150BHP

Read more less

NEUSPEED Rear Sway Bar Performance Links provide direct transition of suspension movement to the anti-roll bar. Features: CNC machined from billet 7075-T6 Aluminium then black hard anodized. Precision teflon lined spherical bearings, made in USA. Stainless steel spacers. High grade bolt. Direct replacement for OEM sway bar link. Notes: Sold as a pair. FITS: Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Arteon Shop By Car/Audi/S3 (8V)/Anti Roll Bars and Links Shop By Car/Volkswagen/Golf Mk7/Anti Roll Bars and Links Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Anti Roll Bars and Links Shop By Car/Audi/RS3 (8V)/Anti Roll Bars and Links Shop By Car/Audi/TT RS (8S)/Anti Roll Bars and Links Shop By Car/Audi/A3 (8V 12-20)/Anti Roll Bars and Links Shop By Car/Audi/TT Mk3 (8S)/Anti Roll Bars and Links Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Anti Roll Bars and Links

Read more less

CTS Turbo is excited to announce our line of Street Sport 60 Durometer engine mounts. The CTS street performance engine mounts are a perfect upgrade for your factory mounts which are known to wear over time leading to drivetrain play and sloppyness during shifting. A void-free non-liquid construction using 60 Durometer rubber offers a significant upgrade to performance and feel over the stock mount. The result is a 60% improvement in stiffness over stock that is daily driving friendly. Features: • 60 Durometer Rubber construction• Cast aluminum wrap-around OEM style body• Direct bolt on replacement for OEM mount• More direct shifting• Improved power transfer Included: • CTS Turbo Street Sport Engine Mount with 60 Durometer insert Application: All MQB 4-Cylinder Engines Shop By Car/Audi/S3 (8V)/Engine Mounts Shop By Car/Volkswagen/Golf Mk7/Engine Mounts Shop By Car/Skoda/Octavia Mk3 (5E)/Engine Mounts Shop By Car/Audi/A3 (8V 12-20)/Engine Mounts Shop By Car/Audi/TT Mk3 (8S)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Engine Mounts

Read more less

CTS Turbo introduces the billet torque arm insert for VAG MQB models. This insert is for vehicles. This billet insert is designed to reduce engine movement while shifting or accelerating.Insert effectively cancels drivetrain slop and movement and does not introduce any vibrations or harshness (even at idle or engine start). The billet insert is made in house from high quality T6061 aluminum and anodized black for years of problem-free operation.The installation is simple, only requiring basic hand tools. Simply undo your factory torque arm bolt, insert the part and reinstall the bolt and torque to 74ft/lbs (100 Nm)! Simple as that. Believe us, the difference in driveability and performance will be amazing. Before you order you will need to check if your car uses the Type 1 or Type 2 original mount as these are not cross compatible. FITMENT Shop By Car/Audi/S3 (8V)/Engine Mounts Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Skoda/Octavia Mk3 (5E)/Engine Mounts Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes

Read more less

The 034Motorsport Billet Aluminum MQB Dogbone Mount Insert for MkVII Volkswagen Golf/GTI/R & 8V Audi A3/S3 is designed to fill the large void in the factory dogbone mount, and limit drivetrain movement without sacrificing ride quality or introducing excessive additional noise, vibration, or harshness into the cabin. By filling the void in the factory mount, this insert eliminates the associated slop to ensure that you experience crisper shifts and a smoother driving experience. Unlike polyurethane insert options on the market, this billet aluminum part will not pack and wear over time, and guarantees long-lasting performance. FITS: Shop By Car/Volkswagen/Golf Mk7/Engine Mounts Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/A3 (8V 12-20)/Engine Mounts Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/RS3 (8V)/Engine Mounts Shop By Car/Audi/S3 (8V)/Engine Mounts Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Engine Mounts Shop By Car/Audi/TT RS (8S)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk3 (5E)/Engine Mounts Shop By Car/Skoda/Octavia Mk4

Read more less

The 034Motorsport Rear Trailing Arm Spherical Bearing Upgrade Kit is designed to replace the factory rubber bushings, resulting in improved handling, and more predictable and precise cornering. Factory rubber rear trailing arm bushings deflect under load, causing the rear end to feel vague and loose, as well as leading to improper suspension geometry and increased understeer. This becomes especially apparent when cornering on uneven surfaces, where the back of the car can feel floaty or unpredictable. The same exact rubber bushing was used by Audi/Volkswagen on a variety of applications, from the Volkswagen Golf to the Audi RS3, leaving much to be desired by enthusiasts and competitive drivers alike.  This kit replaces the rubber bushings with motorsport-quality Aurora Spherical Bearings, which allow for proper articulation without any deflection, ensuring precise handling, and confidence-inspiring road feel. Unlike polyurethane bushings, spherical bearings allow for full suspension articulation without binding, while completely eliminating slop from bushing flex.  Features: Fully Assembled with New Factory Steel Trailing Arms - Simple Bolt-In Installation! Genuine Aurora Spherical Bearings Featuring Teflon Race Lining Billet Aluminum Bearing Holders - Anodized Black Stainless Steel Bearing Spacers Improved Handling & Road Feel More Precise & Predictable Handling Fully Rebuildable Fitment: Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/RS3 (8V)/Bushes Shop By Car/Audi/TT RS (8S)/Bushes Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4 Shop By Car/Volkswagen/Golf Mk7/Control Arms Shop By Car/Audi/A3 (8V 12-20)/Control Arms Shop By Car/Audi/RS3 (8V)/Control Arms Shop By Car/Audi/S3 (8V)/Control Arms Shop By Car/Audi/TT Mk3 (8S)/Control Arms Shop By Car/Audi/TT RS (8S)/Control Arms Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Control Arms Shop By Car/Skoda/Octavia Mk3 (5E)/Control Arms Replaces:  5QM505223  5QM 505 223 5QM505224  5QM 505 224 5Q0505541A  5Q0 505 541 A Installation Instructions: Click Here! Please Note: We recommend getting an alignment to factory specifications after installing the 034Motorsport Rear Trailing Arm Spherical Bearing Upgrade Kit.

Read more less

034Motorsport's Density Line Mounts are the new standard in comfort and performance. Our mounts are redesigned with performance in mind, and manufactured from high-durometer rubber for increased performance and durability, without sacrificing comfort. Density Line Mounts are void-free and fluid-free, eliminating the slop associated with the factory mounts. Street Density: The Street Density Strut Mount is manufactured from 70 durometer rubber, which is approximately 50% stiffer than stock. The rubber is also fully vulcanized to the center cups to increase the lifespan and performance of the mounts significantly. The steel strut mount bodies have also been redesigned to cope with the added stresses of spirited driving. The result is a significant reduction in deflection of the strut mount. These mounts will also eliminate the annoying "squeaking" sound often caused by the stock strut mounts when paired with coilover suspensions. Street Density Strut Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts. Features: Manufactured from 70 Durometer Rubber Rubber Fully Vulcanized to Center Cups Eliminates "Squeaking" Sound Caused by Factory Strut Mounts Reduced Strut Mount Deflection Maintain Proper Suspension Geometry Under Load Improved Steering Feel & Handling Complete Drop-In Replacement of Factory Strut Mounts Priced as a pair Fitment: Shop By Car/SEAT/CUPRA/Toledo Mk3 (5P) Shop By Car/Volkswagen/Polo (AW) Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/RS3 (8V)/Bushes Shop By Car/Audi/TT RS (8S)/Bushes Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Coilover Kits Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4 Installation Guide: Click Here! Replaces: 5Q0 412 331D  5Q0412331D

Read more less

034Motorsport is proud to offer Street Density Rear Shock Mounts for the MkVII Volkswagen Golf R & 8V/8S Audi A3/S3/RS3 & TT/TTS/TTRS! Street Density Rear Shock Mounts for the MkVII Volkswagen Golf R & 8V/8S Audi A3/S3/RS3 & TT/TTS/TTRS are engineered for increased performance and durability over the factory rear shock mounts. Featuring 60 Durometer Density Line Rubber, these performance rear shock mounts are able to cope with increased loads from spirited driving and upgraded suspension components. Designed to be a complete, drop-in replacement for the factory rear shock mounts, Street Density Rear Shock Mounts significantly reduce deflection under hard cornering, which helps maintain proper suspension geometry for better handling. In addition, the Density Line Rubber features enhanced bonding to the cast aluminum mount body - reducing the likelihood of separation and dreaded "clunk" associated with the factory mounts. Features: Complete, Drop-In Replacement for Factory Rear Shock Mounts Manufactured with 60 Durometer Rubber High-Quality Cast Aluminum Mount Body Reduced Strut Deflection for Improved Handling Vulcanized Rubber for Increased Longevity Replaces: 5Q0513353E / 5Q0 513 353 E 8V0513353 / 8V0 513 353 Fitment: (4wd Only) Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/RS3 (8V)/Bushes Shop By Car/Audi/TT RS (8S)/Bushes Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes

Read more less

034Motorsport is proud to offer the ultimate rear sway bar upgrade for the MkVII Volkswagen Golf/GTI & 8V Audi A3 FWD! The 034Motorsport Adjustable Solid Rear Sway Bar is made from a single piece of high-quality, 25.4mm thick spring steel for maximum rigidity, and is designed to combat understeer while reducing body roll under hard cornering. This product was tested thoroughly on the street and track on 034Motorsport's 2015 Volkswagen GTI Development Vehicle and multiple enthusiast-owned MQB Audi/Volkswagen vehicles before release. The 034Motorsport Adjustable Solid Rear Sway Bar substantially reduces understeer and body roll on 8V Audi A3 FWD & Volkswagen Golf/GTI vehicles without compromising comfort on the street. In addition, the 034Motorsport MQB Rear Sway Bar is engineered to be used effectively with the stock front sway bar. No upgrade in the front is required. The addition of a stiffer front bar can positively affect turn-in feel, but ultimately worsens the platform's tendency to understeer. With the stock front sway bar and upgraded 034Motorsport Solid Rear Sway Bar, body roll is virtually eliminated while turn in and off throttle oversteer are greatly improved. Features: 25.4mm Diameter Solid Spring Steel Construction One-Piece Design 2-Way Adjustable What's Included: 034Motorsport 8V Audi A3 FWD & MkVII Volkswagen Golf/GTI (MQB) Adjustable Solid Rear Sway Bar Upgrade Polyurethane Sway Bar Bushings Billet Aluminum Sway Bar Brackets with Integrated Zerk Fittings Sway Bar Bracket Installation Hardware Kit Fitment: Shop By Car/Volkswagen/Golf Mk7/Anti Roll Bars and Links Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Anti Roll Bars and Links Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Anti Roll Bars and Links Shop By Car/Audi/TT Mk3 (8S)/Anti Roll Bars and Links Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Anti Roll Bars and Links Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4 ONLY FOR VEHICLES WITH MULTI-LINK REAR SUSPENSION Sway Bar Rate Data: 034Motorsport (Soft) - 153% Rate Increase vs. Factory Volkswagen GTI (20mm) Rear Sway Bar 034Motorsport (Stiff) - 174% Rate Increase vs. Factory Volkswagen GTI (20mm) Rear Sway Bar

Read more less

034Motorsport is proud to offer the ultimate rear sway bar upgrade for the MkVII Volkswagen Golf R & 8V Audi A3/S3 Quattro! The 034Motorsport Adjustable Solid Rear Sway Bar is made from a single piece of high-quality, 22.2mm thick spring steel for maximum rigidity, and is designed to combat understeer while reducing body roll under hard cornering. This product was tested thoroughly on the street and track on 034Motorsport's 2016 Audi S3 Development Vehicle and multiple enthusiast-owned MQB Audi/Volkswagen vehicles before release. The 034Motorsport Adjustable Solid Rear Sway Bar substantially reduces understeer and body roll on 8V Audi A3/S3 Quattro & MkVII Volkswagen Golf R vehicles without compromising comfort on the street. In addition, the 034Motorsport MQB Rear Sway Bar is engineered to be used effectively with the stock front sway bar. No upgrade in the front is required. The addition of a stiffer front bar can positively affect turn-in feel, but ultimately worsens the platform's tendency to understeer. With the stock front sway bar and upgraded 034Motorsport Solid Rear Sway Bar, body roll is virtually eliminated while turn in and off throttle oversteer are greatly improved. Features:• 22.2mm Diameter• Solid Spring Steel Construction• One-Piece Design• 2-Way AdjustableWhat's Included:• 034Motorsport 8V Audi A3/S3 Quattro & Volkswagen Golf R (MQB) Adjustable Solid Rear Sway Bar• Polyurethane Sway Bar Bushings• Billet Aluminum Sway Bar Brackets with Integrated Zerk Fittings• Sway Bar Bracket Installation Hardware Kit• Sway Bar End Link to Sway Bar Hardware KitFitment: Shop By Car/Volkswagen/Golf Mk7/Anti Roll Bars and Links Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Audi/A3 (8V 12-20)/Anti Roll Bars and Links Shop By Car/Audi/S3 (8V)/Anti Roll Bars and Links Shop By Car/Audi/TT Mk3 (8S)/Anti Roll Bars and Links Sway Bar Rate Data:• 034Motorsport (Soft) - 37% Rate Increase vs. Factory Audi S3 (22mm) Hollow RSB• 034Motorsport (Stiff) - 52% Rate Increase vs. Factory Audi S3 (22mm) Hollow RSB

Read more less

034Motorsport is pleased to present Billet Aluminum MQB Rear Subframe Mount Inserts for the MkVII Volkswagen Golf R & 8V Audi A3/S3 Quattro!MQB Audi/Volkswagen vehicles equipped with Haldex AWD use rubber rear subframe mounts which deflect under load, causing the rear end to feel vague and loose, as well as leading to less-than-optimal suspension geometry and increased understeer. These precision-machined billet aluminum inserts are designed to fill voids in the factory rear subframe mounts, and limit subframe movement without sacrificing ride quality or introducing any perceivable additional noise, vibration, or harshness into the cabin. The result is a more refined, connected driving experience, as well as improved effectiveness of aftermarket rear sway bar upgrades and suspension components.Designed to work in conjunction with the factory rubber mounts, this insert package was engineered using CAD software and thoroughly tested and refined to provide a significant improvement in handling performance and feel.These inserts were tested extensively by 034Motorsport and independent Audi/Volkswagen enthusiasts before release on new MQB chassis AWD vehicles. Installation is very simple, can be performed in under an hour, and is completely reversible.Features: T6-6061 Billet Aluminum Construction CNC-Machined In-House Clear Anodized Finish for Durability Engineered to Fill Voids In Factory Rear Subframe Mounts Helps Maintain Proper Suspension Geometry When Cornering Reduces Rear Subframe Movement During Launches & Acceleration Improves Shifting Feel, Resulting in Crisper Shifts Virtually No Additional NVH Transfer Inside Cabin Easy, Straightforward Installation What's Included: 034Motorsport Billet Aluminum MQB AWD Rear Subframe Insert - Front (Pair) 034Motorsport Billet Aluminum MQB AWD Rear Subframe Insert - Rear (Pair) Installation Instructions: PDF Fitment: Shop By Car/Volkswagen/Passat B8 Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Arteon Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Volkswagen/Golf Mk7/Engine Mounts Shop By Car/Volkswagen/T-Roc Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/RS3 (8V)/Bushes Shop By Car/Audi/TT RS (8S)/Bushes Shop By Car/Skoda/Superb (3V 2015-) Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4 Please Note: The factory rear subframe bolts are torque-to-yield bolts, and we recommend replacing them when installing these inserts. A new set of four OEM bolts is available separately.

Read more less

034Motorsport's Motorsport StreetSport Mounts for Audi 8V/8V.5 A3/S3 8S TT/TTS and VW Mk7 Golf/GTI/R models are the new standard in ultra-high performance. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives. These mounts have a lifetime guarantee regardless of power level applied and type of track racing they are used for. Motorsport StreetSport Mounts are void-free and fluid-free, eliminating the slop associated with the factory engine/transmission mounts, and are designed to be completely rebuildable with replaceable Density Line rubber bushings. These heavy-duty mounts will result in a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts, but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle is moving, NVH is slightly higher than stock. HIGH-DUROMETER RUBBER VS. POLYURETHANE: Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings. Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Performance Applications Great Solution for Highly-Tuned Stock Turbo Power Levels Replaceable 50 Durometer Density Line Rubber Bushings with Void-Free Construction Significantly Less NVH than TrackSport Version Virtually Indestructible Lifetime Warranty Reduced Drivetrain Slop Decreased Engine Movement Under Load More Direct Power Transfer Improved Shifting Feel Complete Drop-In Replacement of Factory Engine/Transmission Mounts Sold in Pairs NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure. FITS: Shop By Car/Audi/S3 (8V)/Engine Mounts Shop By Car/Volkswagen/Golf Mk7/Engine Mounts Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Engine Mounts Shop By Car/Audi/A3 (8V 12-20)/Engine Mounts Shop By Car/Audi/TT Mk3 (8S)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Engine Mounts

Read more less

Replace your flimsy, imprecise OEM sway bar end links with these performance engineered adjustable Dynamic+ Billet Adjustable Front Sway Bar End Links from 034Motorsport! 034Motorsport's Dynamic+ Billet Adjustable Front Sway Bar End Links allow for uncompromised transfer of suspension movement to the sway bar, and are adjustable in length, allowing you to eliminate preload on the sway bar. 034Motorsport Dynamic+ Billet Adjustable Front Sway Bar End Links use high-misalignment ball joints, ensuring that the end links do not bind as the suspension articulates. This 034Motorsport Dynamic+ Adjustable Rear Sway Bar End Link Kit has the features, performance, and maintenance-free operation to make it a winner on the street and the track! Features: CNC Machined 6061-T6 Aluminum Bodies (Anodized Black for Durability) Zinc Plated Steel Ball Joints OEM+ Quality with Adjustability Quieter with Less Maintenance than Spherical Motorsport End Links +/- 0.75" of Adjustability (1.5" Total Adjustment Range) Sold In Pairs Functions: Adjust Sway Bar Preload - Essential When Corner Balancing Lowered Vehicles Increased Strength for Stiffer Sway Bars, Heavier Loads and Aggressive Use Improved Sway Bar Reaction Time & Accuracy Fitment: Shop By Car/Volkswagen/Jetta Mk6 Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Volkswagen/Tiguan (Mk1) Shop By Car/Volkswagen/EOS Shop By Car/Volkswagen/Golf Mk5/Anti Roll Bars and Links Shop By Car/Audi/S3 (8V)/Anti Roll Bars and Links Shop By Car/Volkswagen/Golf Mk7/Anti Roll Bars and Links Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Volkswagen/Golf Mk6/Anti Roll Bars and Links Shop By Car/Audi/RS3 (8V)/Anti Roll Bars and Links Shop By Car/Audi/TT RS (8S)/Anti Roll Bars and Links Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8P 03-13)/Anti Roll Bars and Links Shop By Car/Audi/A3 (8V 12-20)/Anti Roll Bars and Links Shop By Car/Audi/S3 (8P)/Anti Roll Bars and Links Shop By Car/Audi/TT Mk3 (8S)/Anti Roll Bars and Links Shop By Car/Audi/TT RS (8J)/Anti Roll Bars and Links Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4 Compatible with all stock and aftermarket sway bars.

Read more less