Performance - BMW 1 Series F40 (2019-Present)

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Want to tighten your grip on the road? Scorpion’s lightweight aluminium chassis braces tick all the boxes. The single-piece manufacturing process ensures a high-strength connection under load. Braces are powder-coated black and etched with the Scorpion mark.Our underbody bracing reduces performance loss due to chassis twist during hard braking or cornering. Enhanced body rigidity translates to a more direct feel with the road surface. (Fits both the Scorpion and OEM pipework.) SMN029B Mini Clubman F54 Cooper S 19-24 GPF Model (excl. JCW & All4) Mini Clubman F54 Cooper S 15-18 Non-GPF Model (excl. All4) BMW F40 128ti GPF Model - Excluding Australian Model

Read more less

FITMENT: 1 SERIES F20/F21/F40 M140i 2 SERIES F22/F23 M240i 3 SERIES G20/G21 M340i 4 SERIES F32/F33/F36 M440i B58 ENGINE! Product Description +11 BHP  +19NM Torque Induction kit and inlet hose included Improved induction noise Full instructions Prepreg 2x2 twill formed carbon fibre Lifetime warranty This product is a direct fit for the OEM part 13718580424 (replaces just the upper airbox and panel filter) & 13718601682 (replaces just the turbo inlet to airbox section). The B58 engine is a masterpiece from BMW, it makes great power, produces a fantastic noise and with the addition of FMINDK50 you can take these qualities even further. When our development team analysed the OEM airbox and inlet tract on the BMW M140i kindly loaned to us from The Performance Company, we came up with a multiple part solution to maximise all areas. The Development Journey Step 1:  UK and some EU spec M140i’s have a blank which stops the low-pressure zone that builds up in front of the radiator from entering the inlet tract. We created FMINLD2, a carbon fibre sculped duct to replace the blank, and route more air into the tract towards the airbox.  Step 2: Now that this greater quantity of air has entered the airbox, we need a greater surface area of filtration to maximise the airflow towards the engine. Therefore, we decided on a high-flow performance cone filter and used our development of other upper airbox induction kits to inform our design process to create FMINDK50. Step 3: The weak link was now the OEM inlet hose with its sound resonator and accordion ribs which cause turbulence and slows down the airflow. We created FMINLH25 (included with this kit) from a multi-ply smooth silicone to significantly reduce turbulent airflow, and to handle big boost builds. We also increased its diameter from 85mm to 90mm.   We used SolidWorks CAD, 3D prints and numerous dyno sessions to truly unlock the power. Simulation testing played a large part in the design process to help maximise the airflow. We were able to experiment with the airflow entering the chamber from the inlet tract into the lower airbox, by changing the position of the filter, the size and location of the louvres and other variables to ensure that the intake is maximising performance. The 3D printed prototypes helped with comparing our simulation testing to real world driving conditions. Please see our video on YouTube which shows dyno testing of our final prototype. This is a valuable comparison that is used in the top tiers of motorsport, now being brought to your vehicle. *Get 10% off the induction kit and inlet duct when purchased together (code automatically applied at checkout) The Carbon Fibre Using carbon fibre brings obvious benefits of strength, lightweight and aesthetics. However, a part that is often forgotten is its low thermal conductivity, which means it reduces heat soak and transmission of said heat to nearby items. Keeping Inlet Air Temps (IAT’s) low is often a difficult part of developing induction systems, so replacing metal or plastic inlet solutions for FMINDK50 will help decrease IAT’s and increase the volume of air supplied to your vehicles engine that is compressed by the turbo charger. This has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque. The Inlet Hose The sound resonator and accordion ribs on the OEM inlet hose cause significant turbulence to the airflow causing a detriment to the engine’s potential performance. Our improved solution, FMINLH25 (included in this kit), gives you a host of performance upgrades, including: Improved induction noise. Multi ply silicone construction improves longevity of FMINLH25 over that of the OEM hose. 5 ply silicone construction will be able to handle strain of engine mapping far better than OEM hose. Increase of diameter at airbox end from 85mm to 90mm. Lifetime warranty. Testing   Testing was completed using Performance Remap in Gloucester with their VTEC 4 wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. The results below speak for themselves, also with the added benefit of being a very easy component to fit with no specialist tools this is superb, affordable modification for the BMW enthusiast. From the Dyno Graph shown above performance gains can be expected from 2500RPM to the red line with 11BHP and around 16NM of torque at peak RPM. The torque increase is clearly visible on the dyno graph and is clear when driving the car. As soon as it comes onto boost you can feel that hit of extra torque pushing you all the way to the redline. The M140i tested on the dyno was stock other than a Pipercross performance panel filter, but with a tuned vehicle you will see greater percentage gains as the vehicle will be able to utilise the increase in volume of cold air. FMINDK50 is part of our acclaimed Hi Flow range and will ensure that your vehicle is getting critical cold air. Not only is the Forge part a better option for performance, but the carbon fibre really helps to give the engine bay some character. The weave of the carbon has been optimised to match the carbon on the intake manifold, which really shows the level of detail we put into our designs. The high-quality carbon fibre is prepreg 2x2 twill formed in an autoclave from billet tooling and finished with an anti UV gloss gel coat. The Forge Motorsport lifetime warranty* on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy. The kit comes complete with everything you need for installation (FMINDK50 carbon induction kit and FMINLH25 inlet hose), which can be carried out in around 1 hour, including a set of full colour instructions. For such an easy to fit product it truly does create some remarkable gains. If you are looking at whether FMINDK50 fits a vehicle not specified in our compatible vehicle listing, please check if your OEM upper airbox has a channel for the strut bar to fit through, if it does FMINDK50 will not fit your vehicle. Please contact us with a photo of your engine bay if you have any questions. Induction Kit and Inlet Duct Package FMINLD2 is a simple bolt-on product which is easy to fit in approximately 45 minutes with no specialist tool, drilling or cutting required. Not only is the Forge part a better option for performance, but the carbon fibre really helps to give the front of your BMW a pleasant aesthetic appearance. The high-quality composite fibre is manufactured from 100% prepreg 2x2 carbon fibre twill formed in an autoclave from billet tooling and finished with an anti UV gloss gel coat.  Get 10% off FMINDK50 and FMINLD2 when bought together (code automatically applied at checkout) *Please note - the filter is excluded from the Forge lifetime warranty*

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less