Performance - BMW 1 Series F40 (2019-Present)

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Here we introduce to you our #Enhanced Edition Hir2 (9012) LED Dip Beam Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. This is truly a DIY item, and CEUK (unlike most companies with a similar product) offers our customers the flexibility with this item. The LED's come as standard 6000K ice white, However as part of the #Enhanced Kit you are supplied with DIY Film Tint which is easily applied to the glass surround on the LED to allow you to change your bulbs into either 3000k (Yellow) or 8000k (white/Blue), Truly giving you control of your output. Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us via our Facebook Page.  Good to know.   High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps   Technical Info   Voltage: 12v Wattage: 50W Lumens: 12,000 (6000 Per Bulb)   What's in the box 2x Hir2 (9012) LED Units (6000k Default) 2x 3000k Interchangeable Film 2x 8000k Interchangeable Film   Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

HB4 / 9006 ice white upgrade 6000k ice white Halogen Upgrade  plug and play, Direct replacement for any OEM 9006/HB4 bulb Pure white light output and increased vision  Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. Can be used in Dipped Beam, Main beam and Fog Light applications  

Read more less

Introducing our OFFICIAL CEUK winter warmer bobble hat   Full black woollen hat with a dark grey bobble for contrast, featuring the official CEUK logo embroidered on the front.   Ultra warm and very classy this is not only a winter tool, but a fashion statement   Also added option for official hanging air freshener

Read more less

Pop them caps in style with a CEUK bottle opener - available in multiple colours 

Read more less

  Rear Valance V.1 BMW M135I / 1 Series M Sport F40 FITS ONLY:BMW M135i F40 (2019-) BMW 1 Series M Sport (2019-)** Fits the M-Pack version, but the exhaust needs to be changed to two single tips **BMW M135i F40 rear valance assembly instruction COMPLETE SET CONTAINS: -> Rear DiffuserCOLOUR:-> Gloss Black This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. Our full fitting manual can be found here: REAR DIFFUSER WITH CLIPS INSTALLATION MANUAL CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk We can only accept a return within 14 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Front Splitter V.5 BMW 1 F40 M-Sport / M135i FITS ONLY:BMW 1 Series F40 M-Sport (2019-) BMW 1 Series F40 M135i (2019-)** It fits M135i version after disassembling the original valance ** COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting Manual CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Front Splitter V.1 BMW 1 F40 M-Sport / M135i FITS ONLY:BMW 1 Series F40 M-Sport (2019-) BMW 1 Series F40 M135i (2019-)** It fits M135i version after disassembling the original valance ** COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting Manual CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Description  Now we give you the Chaser Edition Bluetooth footwell strip kit  This kit is for any car, simply tell us in the description what fuse type you have in your glove box fuse holder and we will send it out! with over 600 static colours, and 200 “Fluid” colour changing and dancing modes this really is a game changer  Controlled fully by your mobile phone using Bluetooth and our fantastic control app all the functions are controlled by you! Powered by your ignition the strip will come on as soon as you start your car and remain on until the ignition is switched off, The kit utilises your passenger footwell fuse box for power What’s in the Box? Footwell Strip Wiring Loom Bluetooth Control Module Instructions Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Glove Box strip not included - This is for other Models - Images are catalogue images Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

BONNET VENTS UNIVERSAL Fits: UNIVERSAL PART BUT WE HAVE KNOWN TO FIT ON... Ford Focus 3 RS 2015 - up FORD Fiesta mk7 ST FACELIFT version 2013 -2016 Renault Megane 3 RS version 2010 - 2015 HONDA CIVIC IX TYPE R (FK2) 2015 - up OPEL CORSA D 2006 - and lots more   COMPLETE SET CONTAINS:-> Bonnet Vents GLOSS BLACKOnly one side of the bonnet extension is coated and the rear side is plain black.(Rear site and edge of item is not coated by structure) Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.We can only accept a return within 14 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less