Performance - BMW 4 Series F32/F33/F36/F82/F83 (2017-2021)

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet upgrade for the S55 engine fitted with hybrid turbos. A direct replacement part that offers increases in performance and response, the enlarged turbo inlets feature a freer-flowing design with an increased internal diameter, which is essential when fitting hybrid turbos. How it works  The original elbows from the air boxes are made from plastic and gradually taper down from 80mm to just 54mm and then 41mm as they enter the turbos. Whilst this is adequate for standard turbo cars, when fitting hybrid turbos, which consume more air, the original elbows can cause an unnecessary restriction that hampers flow when pushing for more power. Our AIRTEC Motorsport direct replacement inlets have been designed in-house to feature pipework that very gently tapers to 64mm in diameter as they reach the turbo inlet, therefore removing the stepped restriction and allowing the maximum amount of internal flow, with increases of nearly 35% compared to standard. The elbow upgrade includes pipework for both front and rear turbos and includes all fixtures and fittings. PLEASE NOTE: We recommend these are fitted at the same time the hybrid turbos are installed and therefore do not provide fitting instructions for this product. Features: · Designed to fit hybrid turbo upgrades · Up to 35% increase in diameter · Larger, freer-flowing design · Improves air flow to the turbo · Increases throttle response · Direct replacement fitment · Includes all fixtures and fittings Registered Design Right number: Application Pending AIRTEC part no: ATMSBMW15

Read more less

Designed to directly replace the OEM pipe, this silicone hose offers increased flow and capacity. By reducing restriction within the induction system, air flow improves and potential power increases can be released. Made from high-quality silicone by Pro Hoses, the induction hose features a 59mm internal diameter, which is increase of 13.5% compared to the original 52mm dimeter. The pipe incorporates a 85mm CNC machined adaptor to match either the standard pipe or induction kit. It also comes with CNC machined PVC take off, which will not go brittle and potentially snap like OEM plastic one. This hose is carefully engineered to be a direct replacement item, which ensures a simple DIY installation process. Finished in gloss black, the hose is suitable to work with both standard and hybrid turbos. Fitment:1 Series F20/F21 M135i(x) (2011-2015)2 Series F22/F23 M235i(x) (2014-2016)3 Series F30/F31/F34 335i(x) (2011-2015)4 Series F32/F33/F36 435i(x) (2013-2016)M2 F87 LCI N55 (2016-2017) Features: Improved air flow for increased power Overall increase in internal volume Simple DIY installation Direct replacement Enhanced induction sound AIRTEC Part No: ATMSBMW13

Read more less

With improved flow and increased strength over the original plastic items, our charge pipes link the turbos to the charge cooler and are suited to modified BMW M3, M4 and M2 Competition models for track or fast road use. The pipes have been designed to improve the overall internal dimeter and flow of the original OEM pipes, which flatten considerably where they pass over the top of the engine. The original OEM pipes are also made from a lightweight plastic, and with the increased boost pressures associated with a remap or hybrid turbos, the plastic seams can split and form a hairline crack. This is often invisible to the eye, but it’s an issue that will affect the engine’s performance and the turbos’ longevity. The AIRTEC Motorsport replacement pipes are constructed from alloy, so they will not fail with higher boost pressures and maintain a 57mm internal dimeter from the start to finish. Both pipes also feature a 1/8NPT port fitting suitable for a methanol injection set up, and the exterior of the pipes are finished in a subtle black powder coat. The kit features two silicone joiners as well as two CNC-machined connectors to house the original BMW O-rings, with adapters for the replacement fixtures and fittings that come as part of the kit. Fitting takes around 2 hours and the original engine cover can still be fitted in place, but for a perfect fit, we recommend enlarging the apertures slightly, which can be done neatly in order to retain the original look. Fits the following models:•F87 M2 Competition – (From 10/2016)•F80 M3 – (From 04/2012)•F82/3 M4 – (From 02/2013) Key features:•Improved flow with a consistent, larger dimeter•Alloy construction for increased strength•Precision engineered CNC connectors to house original O-rings•Comes complete with all fixtures and fittings•Finished in a high-quality black powder coat Registered Design Right number: AIRTEC Part No: ATMSBMW1

Read more less

As part of our expanding BMW M2 N55 product range, AIRTEC Motorsport are proud to launch our cold side boost pipe kit for track or fast road use. Designed to work with our uprated cold side boost pipes, our direct replacement hot side pipe is made from high quality aluminium construction and also features an increased diameter to improve both capacity and flow. The pipes also feature a CNC-machined flange on either end that retains the original o-ring and spring clip to ensure a perfect fitment. The comprehensive fitting kit includes a Pro Hoses silicone connector and jubilee clips, as well as detailed installation instructions. Please see the matching cold side boost pipe kit: BMW M2 N55 Cold Side Boost Pipes Specification: Direct replacement fitment High quality aluminium construction Enlarged diameter for improved flow CNC-machined flanges Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSBMW10

Read more less

As part of our expanding BMW N55 product range, AIRTEC Motorsport are proud to launch our cold side boost pipe kit for track or fast road use. In original form, due to the thin plastic construction these pipes are known to split or fracture even at standard levels of boost and when pressure is increased with a remap they are more prone to failure. Our direct replacement pipe is made from high quality aluminium that can withstand any increase in boost pressure and also features a larger internal diameter for improved capacity and flow. The pipes also feature a 1/8 NPT meth injection port and a CNC-machined flange on either end that retains the original o-ring and spring clip to ensure a perfect fitment. The comprehensive fitting kit includes a Pro Hoses silicone connector, all fixings and fittings, and jubilee clips, as well as detailed installation instructions. Fitment: 2014 to 2018 – F20 – M135 N552014 to 2018 – F22/F23 – M235i & M235i xDrive N552016 to 2018 – F87  – M2 N552012 to 2018 – F30/F31/F36 – 335i & 335i xDrive N552012 to 2018 – F34 – 335i & 335i Gran Tourismo xDrive N552012 to 2018 – F32 – 435i & 435i xDrive N55 Specification: Direct replacement fitment High quality aluminium construction Enlarged diameter for improved flow CNC-machined flanges 1/8 NPT meth injection port Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSBMW9

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport are proud to launch our cast turbo intake elbow for the B58 kit for fast road or track use. In original form, due to the thin plastic construction these pipes can split or fracture even at standard levels of boost and when pressure is increased with a remap they are more prone to failure. Our direct replacement elbow is made from high-quality cast aluminium that features a larger internal diameter for improved capacity and removes the original resonators for improved sound and flow. Unlike any other replacement elbow on the market or the original, it doesn’t feature an aggressive step down but instead gently tapers to help ensure an optimum flow from start to finish. The elbow comes with detailed fitting instructions and is a direct replacement part that uses the original fittings and fixings and O-ring. Finished in powder coated black with a AIRTEC Motorsport cast logo, these uprated elbows offer a great benefit for modified B58 engine owners. Fitment:2015 to 2019 – F20/F21 – M140i2015 to 2019 – F22/F23 – M240i2014 to 2019 – F30/F31/F36 – 340i2014 to 2019 – F32/F33 – 440i AIRTEC Part No: ATMSBMW11

Read more less

MMR Performance Charge Pipe Kit for the S55 F8x M2C / M3 / M4 Experience the signature MMR Performance high quality on your BMW M2C, M3 or M4 model with the MMR Charge Pipe Kit! This performance enhancing Charge Pipe Kit from MMR Performance provides your S55 powered BMW M2 competition, M3 or M4 model with everything you need to drastically enhance both the performance and reliability of the model. The pipework on the standard BMW Charge Pipes is not up to the required standard in order to run the increased boost pressure. The increased boost can be prone to splitting or cracking making it not ideal for BMW models running exceptionally high amounts of power. The lightweight construction of the MMR Charge Pipe Kit provides a direct replacement for these inadequate pipes, therefore offering an appropriate solution to the pipe splitting problems whilst assuring you of the signature MMR Performance quality, even at the significantly higher power outputs.  Looking as good as they perform, the MMR Performance Charge Pipes are constructed in the finest smooth bore pipework. Enhancing the airflow passing through the system as well as improving on the throttle response and ultimately the power output, the Charge Pipe Kit is expertly finished off in a durable crinkle black finish with the unique MMR logo etched into the side of the pipe.The MMR Charge Pipe Kit also includes a charge-cooler to throttle-body hard pipe for the easy addition of either a methanol or water injection. What's Included? Three high-flow aluminium charge pipes with CNC leak-free connections. Three silicone coupler hoses. C-clip. Jubilee clips. MMR Performance Product Code: MMRTCP10 Want to learn more about MMR Performance? Get in contact with a member of our BMW tuning experts at AET Motorsport for any additional details you require. With worked performed on our very own BMW M4, our team will have no problem answering any questions that you may have. Check out the MMR Performance Event Film below:

Read more less