Performance - Ford Focus MK2 (2004-2010)

The best intercooler for the Focus ST just got better! Now fitted with the scoop from the AIRTEC RS intercooler package, which forces air directly into the core for even more cooling power!   Bolt on power, no extra parts required to fit and connects to standard size boost hoses(comes with full brackets and fittings included)   Q. Why doesn't it have oil cooler mounts on top of the Intercooler? A. Because we research our products and when the Intercooler is fitted and you install an Oil cooler on top of any intercooler you get absolutely no Airflow to the oil cooler 'due to the upper bumper is Blocking Airflow', so it's pointless. Our AS Performance oil cooler kit is available soon and you will see how well it works with maximum Airflow.   Available In Pro-Series satin Black or Natural Silver AlloyTorque of the Devil Rolling Road test results! 31/01/2009Gen 3 Test results :296.4bhp Brake horse power figure was impressive! :390 lbs/ft Massive Torque curve:148 degrees Inlet Temperature :30 degrees Outlet Temperature Standard Ford Intercooler Test results :275 bhp Brake horse power figure was down on power compared to Gen 3 :350 lbs/ft Torque was also down compared to Gen 3 :144 degrees Inlet Temperature :66 degrees Outlet Temperature AIRTEC's latest intercooler for the ST Turbo, they have now changed the total design with new high flow 60mm core and smooth flow end tanks, which in turn has increased power, torque & also lowered ATC Temps, this could possibly be the best ST intercooler available. Yes, it’s really that good!Bolts onto the bottom of the radiator cradle so there is not major weight put onto the standard radiator mounts like other alloy intercoolers on the market

Read more less

Finally an off the shelf way to fit a Race Tow Strap, no bumper removal and then never using it because your to scared it may crack your bumper due to being bolted in a incorrect towing position  In Fords wisdom they made the original towing eye thread custom, this meant we have to make a tool just to cut the thread on the adapter, then we added a flat section so you can tighten it with a 19mm spanner Complete kit, Genuine TRS Tow strap, adapter boss and Tow strap fixing bolt  Easy fit zinc plated Tow strap machined adapter thread 'M10 Thread'  Short tow bolt will fit Focus Mk2 and Mk3 models both ST and RS variants, and also Mk6 Fiesta ST150 Thread avalable on it's own, or with the optional tow strap.

Read more less

Our AIRTEC Motorsport torque mount delivers on every level, from quality, price and usability. The Yellow bush insert is perfect for everyday use and the odd track day, close to standard driving experience without the excessive engine movement.The Purple Bush insert is aimed @ track and race, not recommended for everyday use as the bush is close to solid and will increase cabin noise (not that bad actually) but massively reduces engine movement for faster gear changes. New Black Series Bush insert Ultimate performance motorsport track and race bushes offering the most precise and accurate driving experience. This bush is nearly 100% solid and is only aimed at the most hard-core track day or serious hard fast road use. Features: 2 x Polyurethane bush inserts – Yellow Fast Road & Purple Track/Race CNC from solid billet alloy, bead blasted and anodised in satin Black Reduces engine movement and wheel hop on hard acceleration A must for modified cars Replaces original ford cast alloy and rubber torque mount Faster gear changes due to less engine movement Can be fitted in under 30 minutes with no special tools required This is why we choose Power Flex:The company operates in a self-contained state of the art factory, manufacturing everything in-house. The stainless steel components are machined on the latest computer controlled equipment to ensure perfect repeatability and quality. The moulding and tooling, design and manufacturing is carried out within the factory ensuring very rapid response time to special projects and complete communication between development, prototyping, testing and manufacturing departments. Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right first time quality. Testing of new components is carried out both on the vehicle and on test rigs. Fits:Focus MK2 ST & RSFocus MK3 ST 250Focus MK3 RS  

Read more less

The Ultimate alloy Turbo top induction pipe Mirror finish , the ultimate finishing touch to any engine bay! Now available in 3 different finishes, Pro-Series Satin Black, Polished Silver and the new Satin Silver (Motorsport Style Finish) Fitting takes about 20-30 minutes Registered Design Right number: 6033438

Read more less

Is your intercooler looking a bit run down? AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler. Stencils available for all AIRTEC intercoolers.     Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1) Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane. Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3) Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.

Read more less

The Original German quick shift 'Progress through technology' Reduce gear changes by up to 30%, faster gear changes = faster cars Features Billet Alloy construction with stainless steel ball end Reduce gear changes by upto 30% Easy DIY job, takes approximately 10-15 minutes to install Fits both ST & RS Models Comes with full fitting instructions

Read more less

  Generation 3 AIRTEC Stage 1 60mm Focus ST Intercooler Upgrade   AIRTEC's latest intercooler for the ST225, the total design has now changed with a new high-flow, 60mm core and smooth flowing end tanks, which has lowered ACTs and in-turn increased power and torque. This could possibly be the best ST intercooler available. Yes, it’s really that good!   Bolts onto the bottom of the radiator cradle so there isn't major weight added onto the standard radiator mounts like other alloy intercoolers on the market.   Comes with full brackets and all fixtures and fittings included.   Available in natural silver or Pro-Series satin black finish for that ultimate stealth look.Still as easy to fit and improved high-flow design. Torque of the Devil Rolling Road Test Results AIRTEC Gen 3 Intercooler:   148 degrees - Inlet Temperature 30 degrees - Outlet Temperature   296.4bhp390lb ft Standard Ford Intercooler:    144 degrees - Inlet Temperature 66 degrees - Outlet Temperature 275bhp 350lb ft of torque    Brake horse power and torque figures both down on power compared to Gen 3     An AIRTEC Best seller!

Read more less

NOW WITH OPTIONAL SIGHT GLASS! Focus Mk2 Lightweight Alloy Water Header Tank replacement. Easy fit takes 20 to 30 minutes to fit, Comes with a brand New High Pressure header tank cap No Drilling required (Unlike other Alloy tanks), uses original fixing points and is a direct replacement for the original Ford plastic header tank. Why not cover up that plastic cap with a Polished stainless steel cap cover, finished in satin Black and engraved Hot Logo, grooved inside for that perfect fit.

Read more less

We have taken our huge Focus RS Intercooler and modified it to fit with the ST Bumper & then taken our massive 2.5" cold side Pro hose (intercooler to inlet manifold) and a Pro hose boost pipe from Intercooler to ST standard metal pipe, making this kit the best value for money option for 300+ bhp Focus ST's   Designed & Proven to extract maximum gains from your 300+ bhp ST, this kit would compliment the DreamScience Turbo X upgrade, Jamsport or a similar Big Turbo conversion.   Our RS into ST Performance & Cooling kit has been Rolling road tested (tests caried out @ AMD Essex)   2.5" Hard pipe upgrade removes fords 2.0" restrictive boost pipe (cold side). We saw gains of 10 bhp+ & 9 lb/ft torque increase's over the standard ford Gains will vary depending on spec of your ST   Intercooler spec. Air-Ram Scoop, forces Air directly into core of intercooler Huge high flow 60mm core, lower ACT Temps,  Smooth flow end tanks, no welds, means no leaks Airtec logo brackets Increased BHP & torque Figure Pro-Series Black Strongest Intercooler available, backed up by our 3 year warranty.  Cold & Hot side Pro hose joiners, available in choice of colours Fitting takes 1 - 2 hours depending on mechanical skill & tools available   Important Note. The Pre-facelift ST has a different radiator compared to the facelift & RS, this makes the left hand pipe (Inlet side) very tight against the radiator cradle & boost hose, we recommend removing the radiator cradle bolt, levering the cradle to the right and re-drilling a new hole & then replace bolt. Its very simple and Easy to do, but is necessary to give you extra clearance for the bigger 2.5" pipe, if you are still not happy with fit we would recommend fitting a RS radiator, not required to get the power you want, just makes cold side hose fit nicer.   Need even more Power! take a look at our stage 4 Airtec intercooler cooling package, this kit includes full 2.5" boost pipe kit.    Please Note: Kawasaki Green is a brighter Green than Ultimate Green (FRS Green)   Intercooler Volume Capacity (The amount of charged air that the intercooler can hold) Standard: 4.4AIRTEC: 7.3-litres

Read more less

AIRTEC Motorsport Group A Filter for Focus ST Mk2 A simple yet hugely effective modification that transforms any Focus ST with a fantastic increase in induction noise, turbo/wastegate chatter and a noticeable improvement in throttle response. Easy to fit, it removes the stock airbox entirely, allowing a cleaner and better looking engine bay too. A great addition to any ST, the kit fits all pre-face lift and face lift models and comes with all fixtures and fittings, including silicone hose connector and an RS-type ECU cover. To make the most of the huge Group A cone filter, there is also the option to add a cold air feed scoop, which helps direct air flow to the filter and also doubles up as a protection if you have RS bonnet vents fitted. Features: 1x huge Group ‘A’ 80mm foam cone filter 1 x pair of custom made silicone Pro Hoses joiners 4x stainless-steel jubilee clips AIRTEC RS-type ECU cover included AIRTEC part no: ATIKFO30

Read more less

Currently made to order, please allow 2-3 weeks before dispatch. AutoSpecialists Design extended wheel arches for the Focus ST 225 (Pre-Facelift) Suitable for the Focus MK2 ST 225 Pre-Facelift to fit with standard front bumpers. These arches are finished in a very high standard and come finished in a gel coating. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  They can be fitted without cutting existing arches, but depending how the car sits depends on the work needed. (Without cutting existing arches, you may not be able to sit as low as you want.) Please note: Will fit Focus ST MK2 PRE-FACELIFT 3 door ONLY. Will not currently fit the 5 door model. Registered Design Right number 6016415

Read more less

Designed & Proven to extract maximum gains from your 300+ bhp ST, this kit would compliment the DreamScience Turbo X upgrade or a similar Big Turbo conversion.   Our RS into ST Performance & Cooling kit has been Rolling road tested (tests caried out @ AMD Essex)   2.5" Hard pipe upgrade removes fords 2.0" restrictive boost pipes. We saw gains of 11.8 bhp & 9 lb/ft torque increase's over the standard ford pipes, these gains were achieved by simply bolting on the big AS 2.5" Boost pipe kit!  (these are RS figures, ST gains to be publised soon) Gains will vary depending on spec of your ST   Intercooler spec. Air-Ram Scoop, forces Air directly into core of intercooler Huge high flow 60mm core, lower ACT Temps,  Smooth flow end tanks, no welds, means no leaks Airtec logo brackets Increased BHP & torque Figure Pro-Series Black Strongest Intercooler available, backed up by our 3 year warranty.  All Pipe's have swayed ends to stop the pipes blowing off Fitting takes 1 - 2 hours depending on mechanical skill & tools available Please Note: Kawasaki Green is a brighter Green than Ultimate Green (FRS Green)   Important Note. The Pre-facelift ST has a different radiator compared to the facelift & RS, this makes the left hand pipe (Inlet side) very tight against the radiator cradle & boost hose, we recommend removing the radiator cradle bolt, levering the cradle to the right and re-drilling a new hole & then replace bolt. Its very simple and Easy to do, but is necessary to give you extra clearance for the bigger 2.5" pipe, if you are still not happy with fit we would recommend fitting a RS radiator, not required to get the power you want, just makes cold side hose fit nicer.

Read more less

Tuning levels on the Focus RS & ST have pushed the standard Ford oil filter housing to its limit, with the fagile diaphragm inside these housings splitting and also leaking due to the clip on design, a upgraded breather system was required, the AIRTEC Motorsport two-piece breather kit ticks all the boxes and more... The AIRTEC Motorsport two-piece breather kit includes the following: 1 x Modified & Baffled Ford oil filter housing, includes new oil filter element and oil seals for no fuss fitting 1 x AIRTEC Motorsport oil separator with billet mounting block and laser cut fitting washer that also doubles up as a template when drilling to attach separator to battery tray 5 x Pro Hoses oil resistant fluorosilicon lined hoses, custom made to fit your engine bay, far superior fitting than straight hoses and available in various colours to match your engine bay. Complete with full stainless steel chunky jubilee clips, very minor trimming of hoses may be required.  1 x Mini breather and alloy joiner, this attaches to bottom of oil separator hose which runs down back of engine and secures to the gearbox with a modified stainless 'P' clip, its positioned so any engine fumes exit underneath the floor pan   Exchange - we require your old oil filter housing before sending 2 piece breather kit. Once you have purchased, a kit will be allocated for you, when we have received your old ford oil filter housing we can send your new 2 piece AS breather kit Outright - you will receive full kit & if you wish to return your old oil filter housing we will refund you £149. This is good for international customers that can't send their old unit back & customers that wish to fit first and then return after installation Other colour hoses are available please state when ordering Please Note: Kawasaki Green is a brighter Green than Ultimate Green (FRS Green)

Read more less

As now fitted to our very popular AIRTEC manifolds. The original brake servo pipe measures 12.5mm but most upgrade inlet manifolds are fitted with a 12mm push fitting, this make the pipe too tight and nearly impossible to remove, the metal 12.5mm push fitting upgrade fits perfectly and easy to install. A new brake servo pipe is £100+ and a our upgrade push fit is only £8.99. Fits most upgraded Inlet manifolds, thread is 3/8 BSP

Read more less

Focus ST Full ECU cover for cold feed Air filter kits. in pro- series black  Covers up old ECU & also act's as a bracket for the ECU.  Comes with high voltage warning logo & information logo. Made from stainless steel, not alloy like other cheap over priced covers!

Read more less

IWG75 Ford Focus ST / XR5 2.5L Turbo 7psi Ford Focus ST Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the IWG is easy to install and requires no special tools or fabrication. We’ve taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator. Features:– Silicone diaphragm with Nomex reinforcement to withstand high temperatures.– High grade, billet aluminium construction.– Stainless steel rods and connecting clevis for corrosion resistance.– Locking Collar design cap allows for quick spring changes (Options from 3psi to 26psi available).– AIRTEC Branded product Ideal for use with any Turbosmart boost controller. Please note: Pictures are library pictures and may not relate to actual product. AIRTEC part no: TS-0941-1010

Read more less

Small Group A style cotton air filter, to fit multiple different applications. Fits the following models: Focus Mk2 RS Stage 2 Carbon Fibre CAIS induction kit Focus Mk2 ST225 CAIS induction kit Focus Mk2 ST225 Group A induction kit Choose from AIRTEC spec cotton filter or genuine K&N replacement filter. *Please note, K&N RU-2800 will fit Focus ST225 Group A induction kit ONLY TRUMPET NOT INCLUDED

Read more less

AIRTEC Motorsport Focus Mk2 Downpipe & De-cat package. Downpipe De-cat Gaskets Bolts Made to a high quality standard and all tubing is finished in brushed stainless steel. Designed and finished in the UK *This is a universal fitting product proven to give significant power gains as well as increased pops and bangs due to an improved flow of exhaust gases.* Expect more popping & deeper aggressive exhaust sound with a de-cat fitted. Gain 10bhp + (depends on spec of your car) 3″ de-cat & downpipe Please note: De-cat removes the standard catalytic converter and will not pass a UK MOT. Must be fitted with an aftermarket exhaust system We recommend this to be used with Stage 2 (ECU Software) but can be used with a standard car Manufactured from T304 grade stainless steel tube. Formed using the finest mandrel bending machines. AIRTEC part no: ATEXHFO2

Read more less

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

Focus ST225 Group A Cold Air Feed which is designed to work with all Group A Open filters. Supplies a cold air feed directly into the Group A Filter Improving and maximising the airflow and performance. The cold air feed comes with Cold feed guide which sits just below the filter securing the trunking. Each kit comes with a 780mm piece of ducting, 1 base plate with attached ram pipe and all required bolts and fixings. PLEASE NOTE: Silver finish is for illustrative purposes only.

Read more less

The 2.5" big boost pipe kit is a must for all remapped RSs, Everything you need is included in the kit. Features: Hot side (turbo to intercooler) is made from 2.5" light-weight alloy and connected with 5 ply silicone hose joiners. NEW! Now comes with 70mm coldside hose to fit standard size throttle body expanding up to 70mmPlease Note: This is a Symposer Delete Item Will fit With the following intercoolers AIRTEC Pace Pro-Alloy Forge Ford OEM Direct replacement! No modding required. Our 2.5" hard pipe upgrade removes Ford's 2.0" restrictive boost pipes. We saw gains of 11.8 bhp & 9 lb/ft torque increases over the standard Ford pipes and these gains were achieved by simply bolting on the kit.    This kit is designed for BIG BHP Focus RS' and will work best on 375bhp and over. All pipes have swaged ends to stop the pipes blowing off on BIG BHP Focus RS'.  Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay. Choose from options throttle body size:Standard Throttle Body  (63mm)Uprated Throttle Body (70mm) Fitting takes 1 - 2 hours. Please note: For Focus ST 225 - MUST Be fitted with 2.5" outlets on intercooler. Stock ST is 2".Will NOT fit Focus ST Stage 1/2 intercooler. WILL fit focus ST Stage 3 intercooler. Please Note: Pipework only available in pro-series black (not silver)

Read more less

A fixed 50/50 vented valve, the Turbosmart Shortie Kompact Dual Port valves have been specifically designed to suit BorgWarner EFR and KKK turbos. They also fit the popular Ford Ecoboost engines. Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost, the new BW/KKK/Ecoboost Kompact valves use O-Ring sealed piston which, coupled with their billet aluminium construction give them over 30PSI boost handling capability. Designed as a bolt-on replacement of the factory valve on all BorgWarner EFR, KKK and most Ecoboost turbos, the Kompact Shortie Dual Port provides better boost response and greater boost handling capability. Included with each Kompact Shortie kit is:Model specific valve, Straight and Banjo Nipples, and Mounting screws. Please note: Pictures are library pictures and may not relate to actual product.

Read more less

Now available is our stunning performance inlet manifolds painted in the following solid colours to match your car – Gloss Black, Frozen White and Colarado Red We have taken more time than most perfecting our manifold to what you see here. We tested several designs, which include a square to tapered manifold that unfortunately didn’t work, and then our Gen2 design finally got the go ahead after months of testing. After completion, we found there was more gains to be made and instead of selling a manifold for the sake of getting sales, we held off the release while our development technicians matched the inlet manifold ports to the lower manifold ports – we felt the difference immediately. Features: Increase in BHP & Torque, expect to see gains from 5 – 10 bhp peak & 20 to 40 lb ft torque. We saw up to 25 bhp mid range gains on our tests. Heat treated for 36 hours & then pressure tested to 56 psi to ensure maximum strength Won’t crack or burst like Ford OEM plastic manifold Unique & stunning design, by far the best looking manifold available CNC Inlet ports to match lower section of the intake manifold ‘Injector side’ only one other cast manifold offers this critical design feature Value for money “You can feel the difference when fitted!” – This is what our customers are telling us time and time again. We are pleased to announce we supply a 12.5mm metal push fitting with every AS performance manifold. Registered Design Right number: 6041778 AIRTEC Part No: ATMSFO5

Read more less

AutoSpecialists Focus ST Carbon Fibre look Gen2 CAIS 'Cold Air Induction System' Gain 10 - 18 bhp depending on spec of your ST. 12 Month's of Proto types & testing has produced a Real Quality and Unbeatable value for money product. Our Gen1 CAIS worked great and feel it was the best value CAIS Money could buy and now we have gone that step further by making a bigger and better CAIS our New Gen2 version. Kit includes, Everything you will need to be able to fit. 'Apart from Tools' 1x CAIS canister with Carbo fibre look end section, CNC billet pipe flange fitting and Red cotton conical style filtter Element. 3x Blue,Black, Orange or Red High Pressure Silicon hoses with the highest quality 100% stainless steel jubilee clips. 1x Black Powder coated CAIS canister mounting cradle with stainless fittings 1x ECU relocation brackets, these brackets safely relocate your ECU behind the n/s/f Head light 1x Colour, Step by step fitting instuctions. Fitting should take approx 3-4 hours depending on Tools and Mechanical skill.  Slightly Deeper induction noise over Standard , Gain Power and enhance the look of your Engine bay with a AutoSpecialists Gen2 CAIS.

Read more less