Performance - Mercedes C Class (W205 / A205 / C205 /S205) 2014-2021

Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!

Read more less

High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!  

Read more less

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

Key facts Pipe Ø: 3.00" (76.20mm) Barcode (GTIN): Fitting takes approximately 0.00 hours FITS: Mercedes C-Class C63S Coupe 4.0 Bi-Turbo V8 (GPF/OPF Equipped Models Only) 2019 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Fits to Pre-PPF models only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Mercedes-AMG C43 performance exhaust is made in 2.5"/63.5mm pipework and fits from the centre section backwards replacing the rear section. The exhaust is designed to fit to the standard bumper mounted O/E exhaust tips. Designed for pre-PPF models the Cobra Sport Rear Performance Exhaust will enhance the grunt of your turbocharged V6 giving you more emotion and tone throughout the rev range giving you a similar experience to that on offer from the AMG's big brother the C63 without the expense of the extra cylinders. This performance exhaust system fits all pre-PPF W205 saloon, S205 estate, C205 coupe and A205 convertible models. All relevant fittings and gaskets are supplied. Press Release The AMG badge always brings with it an air of anticipation whether that be attached to the hottest hatch of the decade or the smoothest saloon of the range when ever you hear AMG you expect to hear a lot more.From factory the AMG C43 offers little hint that there is a near 400BHP turbocharged V6 upfront, and lacks the grunt of its bigger V8 sibling the C63. The aim for the Cobra Sport development team was to provide an upgraded exhaust system for the C43 that would deliver similar thrills to those on offer in the C63 without the spills of the V8 running costs.For those who want a to increase their V6 soundtrack, Cobra Sport offers their Rear performance exhaust. By replacing the factory rear silencers with free flowing pipework and performance backboxes the C43 is allowed to stretch the beautiful tones offered up from the turbocharged V6 powerplant and is optimised for earlier pre-PPF (petrol particulate filter) C43 models, giving passers-by a hint that this is no ordinary saloon. For those who want to channel the inner AMG and open up the boisterous characteristics of their C43, Cobra Sport offers their Venom Rear performance exhaust system. This performance exhaust has been designed to optimise the tone and sound levels of later PPF (petrol particulate filter) equipped models, delivering the soundtrack that AMG owners expect from the factory. The larger bore pipework fits directly into the factory bumper/tip set-up will leave your AMG looking untouched whilst giving it an unrivalled sound that transforms the character and feel of the driving experience. Media

Read more less

Designed for PPF models. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Mercedes-AMG C43 performance exhaust is made in 2.5"/63.5mm pipework and fits from the centre section backwards replacing the rear section. The exhaust is designed to fit to the standard bumper mounted O/E exhaust tips. The Cobra Sport Venom Rear Performance exhaust is designed without silencers to extract the most emotion and tone possible from the turbocharged V6 that is naturally muted from factory due to the PPF filter. Venom Rear Performance Exhaust Test Results (Fitted to a PPF-model): Sound - Engine at Idle: 72dB (+11.9dB) - Static 4,000rpm test: 87.9dB (+9.9dB) This performance exhaust system fits all PPF W205 saloon, S205 estate, C205 coupe and A205 convertible models. All relevant fittings and gaskets are supplied. Please note: Fitment to earlier pre-PPF (petrol particulate filter) equipped models will be extremely loud and is for off-road and motorsport use only. Press Release The AMG badge always brings with it an air of anticipation whether that be attached to the hottest hatch of the decade or the smoothest saloon of the range when ever you hear AMG you expect to hear a lot more. From factory the AMG C43 offers little hint that there is a near 400BHP turbocharged V6 upfront, and lacks the grunt of its bigger V8 sibling the C63. The aim for the Cobra Sport development team was to provide an upgraded exhaust system for the C43 that would deliver similar thrills to those on offer in the C63 without the spills of the V8 running costs. For those who want to increase their V6 soundtrack, Cobra Sport offers their Rear performance exhaust. By replacing the factory rear silencers with free flowing pipework and performance backboxes the C43 is allowed to stretch the beautiful tones offered up from the turbocharged V6 powerplant and is optimised for earlier pre-PPF (petrol particulate filter) C43 models, giving passers-by a hint that this is no ordinary saloon.  For those who want to channel the inner AMG and open up the boisterous characteristics of their C43, Cobra Sport offers their Venom Rear performance exhaust system. This performance exhaust has been designed to optimise the tone and sound levels of later PPF (petrol particulate filter) equipped models, delivering the soundtrack that AMG owners expect from the factory the larger bore pipework that fits directly into the factory bumper/tip set-up will leave your AMG looking untouched whilst giving it an unrivalled sound that transforms the character and feel of the driving experience. Like all Cobra Sport exhausts, this system utilises precision TIG-welding techniques for exemplary fit and finish – a feature that gives Cobra Sport an advantage over other manufacturers. With over 25 years in the performance exhaust industry, each Cobra Sport exhaust system is designed, manufactured and tested in Sheffield, the heart of the UK steel industry. Media

Read more less

Key facts Pipe Ø: 2.76" (70.00mm) Barcode (GTIN): Fitting takes from 1.50 to 2.00 hours FITS: Mercedes C-Class C63 & C63 S (W205) Saloon 4.0 Bi-Turbo V8 (Non-GPF Equipped Models Only) 2015 and Later SSXMZ123 EC-Approved - Non-Valved (For Vehicles without Factory Valve Control System As Standard) SSXMZ120 EC-Approved - with ValveSonic Active Valve Control (Adds Valved System to Cars not fitted with Factory Sports Exhaust) SSXMZ122 EC-Approved - with ValveSonic Active Valve Control (For Vehicles with Factory Valve Control System As Standard) Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Key facts Pipe Ø: 3.00" (76.20mm) Barcode (GTIN): Fitting takes from 2.50 to 3.00 hours FITS: Mercedes C-Class C63 & C63 S (W205) Saloon 4.0 Bi-Turbo V8 (Non-GPF Equipped Models Only) 2015 and Later Large-bore Downpipes and Cat Bypass Pipes Replaces OE Primary and Secondary Cats, Requires Gearbox Removal for Fitting - Fits with OE Cat Back Hi-Flow Sports Cat and Downpipe Replaces OE Primary and Secondary Cats, Requires Gearbox Removal for Fitting - Fits with OE Cat Back Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Key facts Pipe Ø: 3.00" (76.20mm) Barcode (GTIN): Fitting takes from 1.50 to 2.00 hours FITS: Mercedes C-Class C63 & C63 S (W205) Saloon 4.0 Bi-Turbo V8 (Non-GPF Equipped Models Only) 2015 and Later Active Valve Control (AVC) is available to support both vehicles equipped with factory valves on the exhaust as well as a growing range of upgrades Milltek Sport offers to have performance exhaust systems with Valve Control. Also with optional App control on selected models, via iPhone or Android smartphone app’s, AVC brings total control of the exhaust to the drivers finger tips, via full CAN BUS integration with built in safety controls, Milltek’s AVC enables the driver to choose when the valves open and close to tune the sound and volume of the exhaust. All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.

Read more less