Performance - Mercedes GLA (X156) 2013-2019

This valve is an upgrade for the 2.0 turbocharged M133 DE20 LA (265 kW 355BHP version)  engine found in the Mercedes AMG A45 upto 2015. The engine as supplied by AMG has a port for a dump valve on the side of the turbo, but it is blanked off. Whilst this is fine for the stock level of tune, as the boost is turned up when the car is remapped, driveability can be effected and the car can stutter on hard acceleration, which ultimately will reduce the life of the turbo. FITS: MercedesA Class W176 (2012-2018)A45AMG (2013-2015)CLA Class C117 (2013-2019)CLA45 (2013-2015)GLA Class X156 (2014-2019)GLA45 (Facelift 2015-) Our valve bolts straight up to the turbo and is supplied with appropriate hardware in order to source vacuum to operate the valve. The valve features an aluminium piston for longevity, and is fully serviceable and can be rebuilt with a range of springs to suit your level of power. "Fitted to my Facelift A45 AMG. Takes some time to fit but once installed in my opinion is well worth it. Sounds great, loud enough to put a smile on your face but not intrusive or "ricery". Also a great add on for anyone going Stage 2. Thanks again ✌"   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

Front Replacement Brake discs and bolts Only for use with existing Bell Hats to fit Forge Motorsport Brake kits. 2x 356 x 32 Discs Bolt kit Proprietary iron alloy rotor discs with directional curved vanes for optimized rotor cooling Slotted rotors for dust and gas evacuation adds long term durability Please Note:Forge Motorsport or its resellers will not offer any warranty or replacement if brake vibration, abnormal pad wear, caused by uneven discs which has resulted after poor and incorrect installation. ***THE MINIMUM THICKNESS OF THESE DISCS SHOULD BE NO LESS THAN 29mm BEFORE THEY ARE CHANGED*** Please Lock with 14NM   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

This Blow Off, or Dump valve, is for the Mercedes 2.0 Turbo GDi engine found in the CLA250 that has the electronically controlled bypass valve. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. FITS: MercedesA Class W176 (2012-2018)A160A180A200A220A250B-Class W246 (2011-2018)B160B180B200B220B250CLA Class C117 (2013-2019)CLA180CLA200CLA250GLA Class X156 (2014-2019)GLA180GLA200GLA250GLC Class X253 (2015-2019)GLC200GLC250 Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. All parts require for installation are included, together with full installation instructions.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised

Read more less

This Recirculating valve is for the Mercedes 2.0 Turbo GDi engine found in the CLA250 that has the electronically controlled bypass valve. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. fits: MercedesA Class W176 (2012-2018)A160A180A200A220A250B-Class W246 (2011-2018)B160B180B200B220B250CLA Class C117 (2013-2019)CLA180CLA200CLA250GLA Class X156 (2014-2019)GLA180GLA200GLA250GLC Class X253 (2015-2019)GLC200GLC250 Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. All parts require for installation are included, together with full installation instructions.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge are pleased to offer a Blow Off Valve (BOV) Adaptor for the Mercedes A180, A250, CLA 250 & GLA 250. The spacers were developed to produce the great atmospheric BOV sound that is expected from your turbocharged vehicle, although normally lacking on your vehicle. This CNC machined spacer, made from solid billet aluminium, gives you that sound you have been looking for. When letting off the throttle you get that sweet and satisfying “whoosh” letting everyone know your Mercedes is in fact turbocharged. It has been designed to work with the original electrically controlled solenoid and utilises high quality o-rings for a perfect seal. Mercedes equipped your car from the factory with a recirculating style turbocharger valve which allows the charge air to be routed around the turbocharger from the boost side back to the intake side. The downside to this style of system is it recirculates the hot air back into the intake side of the turbo, increasing temperatures. When equipping a vehicle with a Blow Off Adaptor like ours, it helps remedy this issue. This great solution for open air venting includes everything you will need for the install. FITS: MercedesA Class W176 (2012-2018)A160A180A200A220A250B-Class W246 (2011-2018)B160B180B200B220B250CLA Class C117 (2013-2019)CLA180CLA200CLA250GLA Class X156 (2014-2019)GLA180GLA200GLA250GLC Class X253 (2015-2019)GLC200GLC250   In The Box:1 x FMSPMERC Blow Off Adaptor3 x M6 x 35 Socket Cap Bolts1 x Forge Sticker    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a replacement Pipercross filter that fits the FMINDK20 intake. These have been created exclusively for Forge by filtration gurus Pipercross and feature the latest multilayer-foam technology. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty*  FITS: MercedesA Class W176 (2012-2018)A45 AMG (Facelift 2015-)A45AMG (2013-2015)CLA Class C117 (2013-2019)CLA45 (2013-2015)CLA45 (Facelift 2015-)GLA Class X156 (2014-2019)GLA45 (2014-2015)GLA45 (Facelift 2015-)   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This product offers a performance increase of up to 20 BHP as well as enhancing the induction noise! The combination of both intake adapter and air filter enables you to get the most out of the stock intake system on the Mercedes A45 AMG, CLA45 and GLA45. The powder coated, large bore metal intake adapter supplied with this kit replaces the very restrictive stock intake adapter, equating to a huge 138% + increase in area. FITS: MercedesA Class W176 (2012-2018)A45 AMG (Facelift 2015-)A45AMG (2013-2015)CLA Class C117 (2013-2019)CLA45 (2013-2015)CLA45 (Facelift 2015-)GLA Class X156 (2014-2019)GLA45 (2014-2015)GLA45 (Facelift 2015-) Coupled with the Pipercross filter which increases flow by up to 30% over the stock filter, as well as improving filtration. All components are manufactured here in the UK You can find the replacement filter for this induction kit here - FMINDK20-RF *Please note - the Pipercross filter is excluded from the Forge lifetime warranty*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Working with in the limited space available surrounding the OEM side-mount chargecooler radiator and looking to develop the most efficient heat exchanger for the space available. Forge Motorsport has developed this compact V-mount radiator setup for the Mercedes A45 AMG (2.0L M133 Engine). Increasing the available core surface area by 43.5% over the OEM component. FITS: MercedesA Class W176 (2012-2018)A45AMG (2013-2015)CLA Class C117 (2013-2019)CLA45 (2013-2015)GLA Class X156 (2014-2019)GLA45 (Facelift 2015-) Featuring OEM style CNC machined couplers for direct fitment to the pre-existing chargecooler coolant pipework. No cutting of hoses or removal of couplers required. The laser cut radiator surround, clips into the OEM ducting and utilises the cold air feed from the front bumper. Refined design. This part has been carefully designed and developed using the latest Solidworks 3D CAD software. Researched, designed, developed, and handmade in Great Britain.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description This is a replacement carbon canister including Pipercross filter that fits the FMINDGOLR twintake and Fiat FMINDF500 These have been created exclusively for Forge by filtration gurus Pipercross, and feature the latest multilayer-foam technology that is proving to be so successful in this season’s British Touring Car Championship  (BTCC). These are priced individually. Please order 2 when replacing carbon canister/filters on the FMINDGOLR system. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.  

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under full right and left wheel lock. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are 11mm thick with a 66.5mm bore and dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcentric" spacers) The spacers are suitable for most vehicles produced by Volkswagen Group. A 11mm spacer will give an overall track increase of 22mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   In The Box:2 x FMWS10 11mm Wheel Spacer1 x Forge Sticker

Read more less