Performance - Mini R50/R52/R53 (2000-2006)

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!

Read more less

High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!  

Read more less

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

 This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Fitment Years: 2002 - 2006 Model: One 1.6 R50/R52 / Cooper R50/R52 / Cooper S R52/R53 Fits To: OEM / Scorpion fits: Cooper S R53 & R52 One R50 Cooper R50 Following its launch in 1959 the classic Mini was soon on its way to becoming a global icon especially after partnering with Cooper in the early 60’s to develop the fabled Cooper & Cooper S variants. Not long after the Cooper S’s release it was entered in the Monte Carlo Rallye which sensationally it won in 1964 & 65. Production of the classic Mini continued until 2000 when the last one rolled off the production line however this was swiftly followed by the new generation BMW Mini which launched in the same year. Scorpion have been producing performance exhausts for the classic and new generation Mini’s for over 30 years, so it was natural that we became chief technical partner with the increasingly popular Mini Challenge race series ensuring true track to road technology transfer for our products.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SMNC014 Product Type Manifold Fitment Years 2002 - 2006 Fits To OEM / Scorpion Model Fitment One 1.6 R50/R52 / Cooper R50/R52 / Cooper S R52/R53 Shipping Dimensions 73cm x 32cm x 32cm Notes 709BM is interchangeable with 710BM, Engine management light may be activated, Stage 2 ECU remap recommended Closed Circuit Product Yes

Read more less

Scorpion Exhausts Mini Cooper S R52/R53 Non-resonated & resonated cat-back system Fits Years 2002 to 2006 Fits to OEM / Scorpion Pipe Diameter 57.1mm/2.25 Following its launch in 1959 the classic Mini was soon on its way to becoming a global icon especially after partnering with Cooper in the early 60’s to develop the fabled Cooper & Cooper S variants. Not long after the Cooper S’s release it was entered in the Monte Carlo Rallye which sensationally it won in 1964 & 65. Production of the classic Mini continued until 2000 when the last one rolled off the production line however this was swiftly followed by the new generation BMW Mini which launched in the same year. Scorpion have been producing performance exhausts for the classic and new generation Mini’s for over 30 years, so it was natural that we became chief technical partner with the increasingly popular Mini Challenge race series ensuring true track to road technology transfer for our products.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SMN003 Product Type Cat-Back Resonated Non-resonated Fitment Years 2002 - 2006 Fits To OEM / Scorpion Model Fitment R52/R53 Pipe Diameter 57.1mm/2.25" * Tailpipe Monaco Tailpipe Diameter 90 x 76mm Shipping Dimensions 101cm x 62cm x 35cm

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

Key facts Pipe Ø: 2.50" (63.50mm) Barcode (GTIN): Tip style: Twin 76.2mm Special Fitting takes approximately 0.00 hours FITS: New Mini Mk1 (R52) Cooper S Convertible 2004 to 2008 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Key facts Pipe Ø: 2.13" (53.98mm) Barcode (GTIN): Tip style: 90mm Jet Fitting takes approximately 0.00 hours FITS: New Mini Mk1 (R50) One 1.6i 2001 to 2006 New Mini Mk1 (R50) Cooper 1.6i 2001 to 2006 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Fitment Years: 2001 - 2006 Model: R50 Fits To: OEM Only Pipe Diameter: 50.8mm/2" FITS: One R50 Cooper R50 Following its launch in 1959 the classic Mini was soon on its way to becoming a global icon especially after partnering with Cooper in the early 60’s to develop the fabled Cooper & Cooper S variants. Not long after the Cooper S’s release it was entered in the Monte Carlo Rallye which sensationally it won in 1964 & 65. Production of the classic Mini continued until 2000 when the last one rolled off the production line however this was swiftly followed by the new generation BMW Mini which launched in the same year. Scorpion have been producing performance exhausts for the classic and new generation Mini’s for over 30 years, so it was natural that we became chief technical partner with the increasingly popular Mini Challenge race series ensuring true track to road technology transfer for our products. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SMNS001 Product Type Cat-Back Resonated Non-resonated Fitment Years 2001 - 2006 Fits To OEM Only Model Fitment R50 Pipe Diameter 50.8mm/2" * Tailpipe Imola Tailpipe Diameter 100mm Shipping Dimensions 119cm x 60cm x 28cm

Read more less

This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Two Piece Design (Removable Cat / Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap Key facts Pipe Ø: 2.50" (63.50mm) Barcode (GTIN): Fitting takes from 2.00 to 3.00 hours FITS: New Mini Mk1 (R50) One 1.6i 2001 to 2006 New Mini Mk1 (R50) Cooper 1.6i 2001 to 2006 New Mini Mk1 (R53) Cooper S 2002 to 2006 New Mini Mk1 (R52) Cooper S Convertible 2004 to 2008 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Key facts Pipe Ø: 2.50" (63.50mm) Barcode (GTIN): Fitting takes approximately 0.00 hours FITS: New Mini Mk1 (R53) Cooper S 2002 to 2006 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less