Performance - Seat Ibiza MK3 (6L) 2002-2008

This disc installation kit comes with everything you need to install our 1 piece 330x28mm front brake discs. Excluding calipers & pads. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 1 piece brake discs are 330x28mm from a different vehicle manufacturer which we have modified to allow fitment to your car. We dimple the discs to give it that Porsche turbo look. We also include hub centering rings which reduce the larger center bore of these discs to match VAG hubs to ensure correct fitment. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. New pads are highly recommended to be installed. Included in our kit:2x Caliper carriers2x 330x28 1 piece front brake discs (Dimpled Only)2x Disc mounting screws2x Centre bore reducing rings1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x Porsche Boxster calipers (Part No's: 996.351.425 / 996.351.426)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS: AUDI A1 8X AUDI S1 8X AUDI A3 8L AUDI S3 8L SEAT IBIZA MK3 6L SEAT IBIZA MK4 6J SEAT LEON MK1 SEAT TOLEDO 1M SKODA FABIA MK2 5J SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C

Read more less

RACE APPLICATION ONLY - NOT FOR ROAD USEThe calipers included in this kit are 6 Piston made by AP Racing. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x 6 Piston AP Racing calipers2x Caliper carriers2x 362x32mm 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS: AUDI A1 8X AUDI S1 8X AUDI A3 8L AUDI S3 8L SEAT IBIZA MK3 6L SEAT IBIZA MK4 6J SEAT LEON MK1 SEAT TOLEDO 1M SKODA FABIA MK1 6Y SKODA FABIA MK2 5J SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C

Read more less

This front brake adaption kit allows the fitment of Porsche 996TT Calipers to VAG stock R32 334mm brake discs (see below for required parts & part numbers). The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x Caliper carriers1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x Porsche 996TT calipers (Part No's: 996.351.429 / 996.351.430)2x 334mm front brake discs (Part No's: 8N0615301B / 8N0615302B)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS: AUDI A1 8X AUDI A3 8L AUDI S1 8X AUDI S3 8L AUDI TT 8N SEAT IBIZA 6J MK4 SEAT IBIZA 6L MK3 SEAT LEON MK1 SEAT TOLEDO 1M SKODA FABIA 5J MK2 SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C

Read more less

This front brake adaption kit allows the fitment of Porsche Boxster Calipers to VAG stock 312mm brake discs (see below for required parts & part numbers). The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The fitting kit includes bolts that are high tensile M12x1.25 coupled with A2 stainless spring washers. Included in our kit: 2x Caliper carriers1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x Porsche Boxster calipers (Part No's: 986.351.421 / 986.351.422)2x 312mm front brake discs (Part No: 8N0615301A or our own VBT Hooked discs 8N31225-GA)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS: AUDI A1 8X AUDI A3 8L AUDI S1 8X AUDI S3 8L AUDI TT 8N SEAT IBIZA MK3 6L SEAT IBIZA MK4 6J SEAT LEON MK1 SEAT TOLEDO 1M SKODA FABIA MK2 5J SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C

Read more less

The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc. Highly durable anticorrosion coating that protects all product surfaces (internal and external) Extended service life due to improved anticorrosion durability Performance pattern allowing greater cooling of braking surface Improved visual appearance Discs priced as pairs Fits: AUDI A1 8X AUDI A3 8L AUDI TT 8N SEAT IBIZA MK3 6L SEAT IBIZA MK4 6J SEAT LEON MK1 SKODA FABIA MK1 SKODA FABIA MK2 SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C  

Read more less

WHEEL FITMENT: Whilst we do try to ensure all our brake kits fit behind the majority of wheel types both stock and aftermarket, we make no guarantees that they will. There is a chance you will need wheel spacers to clear our brake kits. Please take the appropriate steps to ensure wheel clearance before final installation. DRILLED DISCS: Drilled discs are intended for light use, if crack form from drilled holes they have been used too hard and this is not something that is covered under warranty. If outright performance is required we strongly recommend grooved or J hooked. FITS: AUDI A1 8X AUDI A3 8L SEAT IBIZA 6J SEAT IBIZA 6L SEAT LEON 1M SKODA FABIA 5J SKODA FABIA 6Y SKODA FABIA NJ SKODA OCTAVIA 1U VW BORA 1J VW GOLF MK4 VW POLO 6R/6C VW POLO 9N PRICES: - All prices shown exclude and include VAT and are correct at time of publishing and are subject to change without prior notice. - Prices do not include Shipping or Installation fees. VAT: - VAT is charged at the current rate of 20% to customers within the European Union Community. BREXIT 2021 EUROPEAN TAXATION CHANGES: For European Customers prices now displayed in cart once you enter your address will have 20% UK VAT Tax removed, however you will have to pay some form of Duties / VAT prior to delivery of your goods. If you are unsure of charges we recommend you should contact your local authorities ahead of placing your order. DISPATCH AND DELIVERY: - Our week day cut off time for same day dispatch on stocked items is 13:00 (GMT/BST). - If you need an item quickly, please contact us by phone on 0044 (0) 161 804 9888 prior to placing the order online to ensure that the item(s) you require is in stock ready to ship, - If you have ordered later than 13:00 (GMT/BST) and are looking for a same day dispatch, this can sometimes be accommodated, but please contact us first so that we can put things in place to achieve this for you. STOCK: - Our website does not display any information regarding an items stock level. Whilst we try to keep plenty of stock of our most popular items, it is not always possible for us to keep one of every option of every product on the shelf ready to ship. - If you need an order by a certain day/date, we strongly recommend you contact a member of our sales team to check the availability of the item(s) you require. - If you are planning to have your items fitted professionally, please wait until you have received and checked your goods before making any workshop or garage appointments. OVERSEAS CUSTOMERS: - We are able to export most of our product range. - If you are situated outside of the European Union Community, UK VAT is not payable. - Depending on delivery destination there may be import taxes/fees, these are your responsibility to pay. - Customers within the EC are charged VAT unless you have a VAT registered business and are able to provide us with a valid VAT number and proof of your business address such as a letterhead or company website. - Due to specific restrictions there are some countries that we can only accept bank transfer payments from.

Read more less

This quickshifter, once installed, will allow you to shorten the movement of your gear shift in order to obtain the optimum shifting times required for performance driving. You can personally customise the throw to suit your own preference due to an infinitely adjustable pivot mechanism. Click on the 'fitting guide' tab above, for detailed instructions. This unit will fit VW/Audi/SEAT/Skoda (VAG) vehicles with the 5 speed transverse gear boxes (2000 onwards) as seen in the 'compatible vehicles' tab above. This product is supplied with two sizes of pin and one ball fitment, to ensure that it will match the various possible cables found on these vehicles. This WILL also fit the 6 speed 1.4 litre Twincharged engines as found in the Golf Mk5 , Golf Mk6 and Scirocco. On these vehicles it replaces the OEM part No. 1K0 711 046M. This WILL NOT fit vehicles with AGU engine code   In The Box:1 x FMVAG5QS Shifter1 x 8.4mm Pin1 x 10mm Pin1 x Ball Pin1 x 8mm Nut1 x Bag of Grease1 x Instructions1 x Forge Sticker This part is compatible with:AudiA31.4 Twincharged1.8TDieselTTMk1150/180BHP210/225BHPSeatIbizaMk2 (6K2) 1999-2002PetrolMk3 (6L) 2002-2008PetrolLeonMk2 2005-2012DieselVolkswagenBeetle2013 2.0CaddyAllEOSGolfMK4DieselMK51.4 S/ChargeMK61.4 TwinchargedPolo 1.4 GTIScirocco1.4 Turbo 1201.4 Twincharged 160 2.0 up to 2016   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FITS MULTIPLE VEHICLES

Read more less

Description We introduce to you the IllumiNite D2S Bi Xenon replacement bulb upgrade!  A simple replacement unit, completely plug and play providing phenomenal results. Suitable for any D2S application including self leveling headlights. Upto 50% Brighter than OEM / Standard Headlights providing a safer driving experience at night but without causing glare to other drivers. Suitable for Projectors - Will not burn lenses! Technical Specs Colour: 6000K White Power: 12v / 35w Fitment: D2S Xenon / HID Pack Contents 2x D2S Bulbs Guarantee Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. 14 day Money back guarantee if unsatisfied Subject to product being returned at Buyers cost in a re salable condition!

Read more less

Description: When traveling Abroad, or even in the UK its always best to have a tyre inflator in your vehicle! 12v with fused cigerette lighter plug - up to 300psi. Complete with adapter kit for football and bicycle. 3mtr Cable - Enough to use even on large vehicles.

Read more less

This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!

Read more less

SPOILER CAP SEAT IBIZA CUPRA MK3 (2004-2008) Fits only:  SEAT IBIZA CUPRA MK3 (2004-2008) Please Note:  ** The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. **   COMPLETE SET CONTAINS:-> Spoiler Extension with 3M Tape-> Degreasing Cloth Fitting manuals: https://www.maxtondesign.co.uk/pdf/cap-spoiler_fitting-manual-maxton.pdf Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

REAR SIDE SPLITTERS SEAT IBIZA CUPRA MK3 (2004-2008) Fits Only:  SEAT IBIZA CUPRA MK3 (2004-2008) COMPLETE SET CONTAINS:-> Rear Side Splitters (Left & right)-> Fitting manual / Fitting kit https://www.maxtondesign.co.uk/pdf/rear-side-splitters_fitting-manual-maxton.pdf Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

SIDE SKIRTS DIFFUSERS SEAT IBIZA CUPRA MK3 (2004-2008) Fits Only: SEAT IBIZA CUPRA MK3 (2004-2008) COMPLETE SET CONTAINS:-> Side Skirt Splitters-> Mounting Kit-> Mounting Manual   Fitting manual: https://www.maxtondesign.co.uk/pdf/side-skirts-diffusers_fitting-manual-maxton.pdf Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

FRONT SPLITTER V.3 SEAT IBIZA CUPRA MK3 (2004-2008) Fits only: SEAT IBIZA CUPRA MK3 (2004-2008)  COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting Manual   Fitting manual: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdf   Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

FRONT SPLITTER V.2 SEAT IBIZA CUPRA MK3 (2004-2008) Fits only: SEAT IBIZA CUPRA MK3 (2004-2008)   COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting Manual   Fitting manual: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdf   Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

FRONT SPLITTER V.1 SEAT IBIZA CUPRA MK3 (2004-2008) Fits only: SEAT IBIZA CUPRA MK3 (2004-2008)  COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting Manual   Fitting manual: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdf   Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

REAR VALANCE SEAT IBIZA CUPRA MK3 (2004-2008) Fits Only: SEAT IBIZA CUPRA MK3 (2004-2008) Our product is assembled as a replacement for the OEM rear valance. COMPLETE SET CONTAINS: Rear Diffuser This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser.   Our full fitting manual can be found here: https://www.maxtondesign.co.uk/pdf/diffuser-clips-included-manual.pdf CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

STREET PRO REAR DIFFUSER SEAT IBIZA CUPRA MK3 (2004-2008) FITS ONLY : SEAT IBIZA CUPRA MK3 (2004-2008)   COMPLETE SET CONTAINS: §  Maxton Racing Rear Diffuser §  Mounting kit   Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Key facts Pipe Ø: 2.50" (63.50mm) Barcode (GTIN): Tip style: Twin 76.2mm Jet / SINGLE OVAL Fitting takes approximately 0.00 hours FITS: Seat Ibiza 1.9 TDi 130PS and 160PS 2003 to 2007 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

As this kit will be made bespoke for you, please allow 10-15 working days for manufacture and testing of the kit, this can vary depending upon workload and current COVID restrictions.Please note, all kits are for European specification vehicles only.   Model Variant Year range Ibiza III 1.4 2002-2009 Ibiza III 1.6 Sport 2002-2009 Ibiza III 1.8Turbo Cupra 2002-2009 Ibiza III 1.9 SDi 2002-2009 Ibiza III 1.9 TDi 2002-2009 Ibiza III 1.9 TDi Sport 2002-2009   Superior to OEM brake lines, Goodridge Premium Performance Brake Lines feature a PTFE liner, wrapped in a stainless steel braided outer, ensuring that the line doesn’t expand under pressure. Effort exerted at the brake pedal is transferred directly to the calliper. Goodridge Premium Performance Brake Lines have been developed on the track, for use on the road. No expansion, firmer braking and increased confidence. Please note: All Goodridge Premium Performance brake line kits are supplied with copper crush washers where necessary.

Read more less

RTS has developed the ultimate SMF conversion kit & flywheel specifically for the 1.9 TDI engine. RTS unique “Twin Friction” (drive plate) has been developed using a unique flywheel side friction material whilst adopting a segmented pressure plate face. The aramid friction exhibits 50% less wear than a conventional drive plate friction material.This material also reduces the effects of fade. Fade is the decline in the clutch system’s ability to transmit torque as operating temperatures increases. These features in combination with the previously mentioned micro-structure of spheroidal casting and ER2 technology allows the clutch kit to dissipate heat far more effectively, allowing the clutch to run cooler for longer. RTS kit has been designed with a higher clamp load enabling the clutch system to transmit 60% more torque over the standard clutch kit and is suitable for every day driving, fast road and track/circuit racing whilst maintaining user-friendly driving experience. RTS Twin Friction kit has been designed with a higher clamp load allowing. Included in the Kit: Pressure Plate Clutch Plate (HD, Twin Friction or Paddle) Single Mass Flywheel Bolts (Pressure Plate & Flywheel)   Suitable for the following 1.9 TDI 6 Speed Manual Cars Audi A3 Ford Galaxy Seat Alhambra Seat Cordoba Seat Ibiza Seat Leon Seat Toledo Skoda Fabia Skoda Octavia Volkswagen Bora Volkswagen Golf MK4 Volkswagen Polo Volkswagen Sharan

Read more less

RTS has developed the ultimate clutch kit designed to fit the Sachs Flywheel (SAC2294003341) specifically for the 1.9 TDI engine RTS unique “Twin Friction” (drive plate) has been developed using a unique flywheel side friction material whilst adopting a segmented pressure plate face. The aramid friction exhibits 50% less wear than a conventional drive plate friction material.This material also reduces the effects of fade. Fade is the decline in the clutch system’s ability to transmit torque as operating temperatures increases. These features in combination with the previously mentioned micro-structure of spheroidal casting and ER2 technology allows the clutch kit to dissipate heat far more effectively, allowing the clutch to run cooler for longer. RTS kit has been designed with a higher clamp load enabling the clutch system to transmit 60% more torque over the standard clutch kit and is suitable for every day driving, fast road and track/circuit racing whilst maintaining user-friendly driving experience. RTS Twin Friction kit has been designed with a higher clamp load allowing. Suitable for the following 1.9 TDI Manual Cars Audi A1 Audi A3 (8L) Ford Galaxy Seat Alhambra Seat Cordoba Seat Ibiza (MK3) Seat Ibiza (MK4) Seat Leon (MK1) Seat Toledo Skoda Fabia (MK1) Skoda Octavia (MK1) Volkswagen Bora Volkswagen Golf MK4 Volkswagen Polo Volkswagen Sharan

Read more less

RTS has developed the ultimate clutch kit designed to fit the LUK Flywheel (LUK 415 0654 10) specifically for the 1.9 TDI engine RTS unique “Twin Friction” (drive plate) has been developed using a unique flywheel side friction material whilst adopting a segmented pressure plate face. The aramid friction exhibits 50% less wear than a conventional drive plate friction material.This material also reduces the effects of fade. Fade is the decline in the clutch system’s ability to transmit torque as operating temperatures increases. These features in combination with the previously mentioned micro-structure of spheroidal casting and ER2 technology allows the clutch kit to dissipate heat far more effectively, allowing the clutch to run cooler for longer. RTS kit has been designed with a higher clamp load enabling the clutch system to transmit 60% more torque over the standard clutch kit and is suitable for every day driving, fast road and track/circuit racing whilst maintaining user-friendly driving experience. RTS Twin Friction kit has been designed with a higher clamp load allowing. Suitable for the following 1.9 TDI Manual Cars Audi A3 (8L) Audi S3 (8L) Audi TT (8N) Ford Galaxy Seat Alhambra Seat Cordoba Seat Ibiza (MK3) Seat Ibiza (MK4) Seat Leon (MK1) Seat Toledo Skoda Fabia (MK1) Skoda Octavia (MK1) Volkswagen Bora Volkswagen Golf MK4 Volkswagen Polo Volkswagen Sharan

Read more less

Pagid RS - Allround Racing Brake PadsRS14GT cars, Touring cars for club racing and track days.RS 14 features good allround characteristics for many applications. It is a low metallic resin bonded material containing steel and acrylic fibers. RS4-2Classic rally pad and also very popular in small formula and touring cars.RS 42 is a low metallic resin bonded material containing steel and acrylic fibers. The characteristics make this material appropriate for small formula cars. RS4-4Very good rear axle pad for all front engine cars. Very popular club racing compound.RS 44 works for formula cars all the way up to lighter passenger cars. It is a low metallic resin bonded material containing steel and acrylic fibers. The smooth progression of friction from cold to hot makes this material easy to work with. Pagid RSL - Endurance Brake PadsRSL1Used in GT cars, Touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well.RSL 1 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level over a wide range of temperatures. Its low wear rate and disc friendliness makes this material appropriate for endurance races. RSL2GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics often also used in sprint races.RSL 2 is based on the RSL 1 compound but has been further improved in terms of pad and disc life as well as friction stability vs. temperature.It is a low metallic resin bonded material containing steel and acrylic fibers. Furthermore it maintains a constant friction level over a wide range of temperatures. RSL19Rear axle usage in combination with RSL 1 and RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and Touring cars.??????RSL 19 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristic RSL29Very popular in club racing and track days. GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics also often used in sprint races.RSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and acrylic fibers.The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior. Pagid RST - Rally, Sprint and Stock Car Racing Brake PadsRST1Rally tarmac, GT cars and Touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors.RST 1 has a very high friction level and high temperature resistance. It is a semi metallic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST2Rally tarmac, GT cars and Touring cars circuit racing and NASCAR. Also used as rear pad in combination with RST 1 front. Recommended for GT and Touring Car racing on tracks where higher temperatures are an issue.RST 2 is a semi metalic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST3Rally tarmac and gravel, GT cars, Touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.RST 3 is a medium-high friction metal- ceramic compound containing steel and acrylic fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. RST4Formula cars and open wheel racing. Rear axle material for Rally (tarmac and gravel) and for all front engine cars. Also used in NASCAR on long ovals.RST 4 is a semi metallic resin bonded material containing steel and acrylic fibers. This material has a medium friction level and high temperature resistance. RST5Specifically designed and developed for rally racing. Comes for a variety of different pad shapes established in rally sports, especially WRC and Group R.The RST 5 is tailor-made for the challenging requirements of rally sports. Due to its optimized thermal management, it provides ideal performance from low temperatures to extremely high temperature conditions. Thus, it has a great cold ramp-up behavior. Its ideal heat transfer guarantees that the generated heat stays in the brake pad and does not move into the brake fluid, making the RST 5 highly fluid fade resistant.The recovery properties of the material also provide assurance of a constantly ideal operating temperature. With its high initial bite and generally high friction level the RST 5 is a new rally material that perfectly manages the balance between high aggression and prevention of wheel spin, providing the driver with a feeling of reliability and outstanding performance, even under the most demanding conditions. Pagid RSC - Racing Brake Pads for Ceramic Composite DiscsRSC1Race and track day compound for all known types of ceramic brake discs.RSC 1 is a low metallic resin bonded material containing steel and acrylic fibers. This material features good allround characteristics and is suitable for all types of usage. RSC2Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.RSC 2 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications. RSC3Special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.RSC 3 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications.

Read more less