Performance - Seat Leon MK3 (5F) (2013-2020)

LOWER ENGINE MOUNT INSERT (LARGE) DIESEL PFF85-830R Suitable for diesel models, using a softer material that helps reduce movement from the bush but transmits less noise and vibration over fitting the standard PFF85-830 insert. OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) PFF85-830   OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) TRACK USE PFF85-830P Suitable for higher powered cars and track cars, using a stiffer material which helps further reduce engine movement over fitting the standard PFF85-830 insert, being a stiffer material additional noise and vibration may be felt. OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) PFF85-830BLK   OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on) Diagram reference 30

Read more less

PLEASE CHECK WHAT SIZE YOU NEED PRIOR TO ORDERING --- FRONT ANTI ROLL BAR BUSH 21.7MM PFF85-803-21.7 Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303L / 5Q0 411 303 L OEM Part Number: 5Q0411303P / 5Q0 411 303 P OEM Part Number: 5Q0411303S / 5Q0 411 303 S Size 21.7mm --- FRONT ANTI ROLL BAR BUSH 21.7MM PFF85-803-21.7BLK Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303L / 5Q0 411 303 L OEM Part Number: 5Q0411303P / 5Q0 411 303 P OEM Part Number: 5Q0411303S / 5Q0 411 303 S Size 21.7mm --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam --- FRONT ANTI ROLL BAR BUSH 23.2MM PFF85-803-23.2 Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303M / 5Q0 411 303 M OEM Part Number: 5Q0411303T / 5Q0 411 303 T OEM Part Number: 5Q0411303Q / 5Q0 411 303 Q Size 23.2mm -- FRONT ANTI ROLL BAR BUSH 23.2MM PFF85-803-23.2BLK Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303M / 5Q0 411 303 M OEM Part Number: 5Q0411303T / 5Q0 411 303 T OEM Part Number: 5Q0411303Q / 5Q0 411 303 Q Size 23.2mm --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam --- FRONT ANTI ROLL BAR BUSH 24MM PFF85-803-24 Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303N / 5Q0 411 303 N OEM Part Number: 5Q0411303AA / 5Q0 411 303 AA OEM Part Number: 5Q0411303R / 5Q0 411 303 R Size 24mm --- FRONT ANTI ROLL BAR BUSH 24MM PFF85-803-24BLK Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303N / 5Q0 411 303 N OEM Part Number: 5Q0411303AA / 5Q0 411 303 AA OEM Part Number: 5Q0411303R / 5Q0 411 303 R Size 24mm --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Audi RS3 MK4 8Y (2020 on), Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam,  Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink,  Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Audi TT / TTRS Mk3 FV/8S (2014 on) --- FRONT ANTI ROLL BAR BUSH 25MM PFF85-803-25 Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303AB / 5Q0 411 303 AB Size 25mm --- FRONT ANTI ROLL BAR BUSH 25MM PFF85-803-25BLK Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303AB / 5Q0 411 303 AB Size 25mm --- FITS:  Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Seat Tarraco (2018-), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - )  

Read more less

FRONT WISHBONE REAR BUSH PFF85-802 Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902G. OEM Part Number: Bush = 5C0407183 / 5Q0407183 / 81A407183 OEM Part Number: Arm = 5C0407151 / 5Q0 407153 OEM Part Number: Arm = 81A407151C / 81A407152C Size 65mm --- FRONT WISHBONE REAR BUSH PFF85-802BLK Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902GBLK. OEM Part Number: Bush = 5C0407183 / 5Q0407183 / 81A407183 OEM Part Number: Arm = 5C0407151 / 5Q0 407153 OEM Part Number: Arm = 81A407151C / 81A407152C Size 65mm --- FITS: Audi A1 GB (2018-on), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Beetle A5 Rear Beam (2011 - ON), Volkswagen Caddy Mk3.5 Typ 2K (06/2010 - 2020), Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Seat Ibiza Mk5 KJ1 (2017 - ), Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK6 A6 Rear Beam (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Volkswagen Passat B8 (2013 on), Volkswagen Polo MK6 AW Inc. GTI (2018 - ), Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Seat Arona (2019-on), Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Volkswagen Arteon (2017 on), Volkswagen T-Cross (2018 - On), Volkswagen Taigo (2020 on)

Read more less

FRONT WISHBONE FRONT BUSH PFF85-501 For a camber adjustable bush use PFF85-501G. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH PFF85-501BLK   OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH CAMBER ADJUSTABLE PFF85-501G This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH CAMBER ADJUSTABLE PFF85-501GBLK This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FITS: Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Beetle A5 Rear Beam (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010), Volkswagen Caddy Mk3.5 Typ 2K (06/2010 - 2020), Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK6 A6 Rear Beam (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink,  Seat Leon KL Rear Beam, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U, Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

FRONT WISHBONE REAR BUSH, CASTER ADJUSTABLE PFF3-902G Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. OEM Part Number: Bush = 8S0407183B / 81A407183 / 5Q0407183L OEM Part Number: Arm = 8S0407151B / 81A407151C OEM Part Number: Arm = 8S0407151D / 81A407152C --- FRONT WISHBONE REAR BUSH, CASTER ADJUSTABLE PFF3-902GBLK Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. OEM Part Number: Bush = 8S0407183B / 81A407183 / 5Q0407183L OEM Part Number: Arm = 8S0407151B / 81A407151C OEM Part Number: Arm = 8S0407151D / 81A407152C --- FITS: Audi A1 GB (2018-on), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi RS3 MK3 8V (2015 - 2020),  Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Audi RS3 MK4 8Y (2020 on),  Seat Ateca Rear Beam (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Beetle A5 Rear Beam (2011 - ON), Volkswagen Caddy Mk3.5 Typ 2K (06/2010 - 2020), Volkswagen Caddy MK4 Typ SB (2020-ON), Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Seat Ibiza Mk5 KJ1 (2017 - ), Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK6 A6 Rear Beam (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam,  Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Volkswagen Passat B8 (2013 on), Volkswagen Polo MK6 AW Inc. GTI (2018 - ), Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Arteon (2017 on), Volkswagen T-Cross (2018 - On)

Read more less

  Bush Price x Qty Per Car = Pack Price           This pack fits the following vehicles, fitted with OEM lower engine mount 5Q0 198 037 B:   Audi TT Mk3 (after 06/2015) Audi A3 8V (after 06/2015) 1.8 or 2.0 FWD Seat Leon Mk3 (after 2016) 1.8 or 2.0 FWD   Included within this pack are the following parts: PFF85-501 Front Arm Front BushPFF3-902G Front Arm Rear Bush Caster AdjustablePFR85-816 Rear Trailing Arm Mounting BushPFF85-832 Lower Engine Mount Insert This Handling Pack contains a selection of parts from a complete vehicle listing, click here to see more parts available.

Read more less

This pack fits the following vehicles, fitted with OEM lower engine mount 5Q0 198 037 A:   Audi TT Mk3 (up to 06/2015) Audi A3 8V (up to 06/2015) Audi A3 8V (after 06/2015) FWD up to 1.6 Petrol (Multilink Rear Suspension) Audi A3 8V (after 06/2015) AWD (except RS3) Seat Leon Mk3 (up to 2016) Seat Leon Mk3 (after 2016) FWD up to 1.6 Petrol (Multilink Rear Suspension) Seat Leon Mk3 (after 2016) AWD Included within this pack are the following parts:   PFF85-501 Front Arm Front Bush PFF3-902G Front Arm Rear Bush Caster Adjustable PFR85-816 Rear Trailing Arm Mounting Bush PFF85-830 Lower Engine Mount Insert   This Handling Pack contains a selection of parts from a complete vehicle listing, click here to see more parts available.   

Read more less

PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adaptors, 8N0803855 and 8N0804583, that many owners may already have fitted. Its magnetic head self-locates into the recess of the metal OE adaptor ensuring a safe and solid lift every time, again recommended for use in sets of 4 simultaneously. OEM Part Number: 8N0804583 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING          Fits the following vehicles: Audi A3/S3 Mk1 8L (1996-2003) Audi A3/S3/RS3 Mk2 8P (2003-2012) Audi A3/S3/RS3 Mk3 8V (2013-) Audi TT Mk1 8N (1999-2006)  Audi TT/S/RS Mk2 8J (2007-2014)  Audi TT Mk3 8S (2014 on)  Audi Q2 (2017 on)  Audi Q3 (2012 - 2018)  Seat Toledo Mk2 1M (1999 - 2004)  Seat Toledo Mk3 5P (2004-2009)  Seat Alhambra Mk2 (2010 on)  Seat Leon Mk1 TYP 1M (1999-2005)  Seat Leon Mk2 1P (2005-2012)  Seat Leon Mk3 5F (2013 on)  Skoda Octavia Mk1 Typ 1U (1996-2004)  Skoda Octavia Mk2 1Z (2004-2012)  Skoda Octavia 5E (2012-2019)  Skoda Yeti 5L (2009-2017)  Skoda Superb B6 (2009-2011)  Skoda Superb 3V (2015 on)  Volkswagen New Beetle & Cabrio (1998-2011)  Volkswagen Beetle A5 (2011 on)  Volkswagen Bora (1999-2005)  Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010)  Volkswagen Caddy Mk3.5 Typ 2K (06/2010 on)  Volkswagen Golf Mk4 1J (1997-2004)  Volkswagen Golf Mk5 1K (2004-2010)  Volkswagen Golf Plus 5M (2004-2010)  Volkswagen Golf Mk6 5K (2009-2012)  Volkswagen Golf Mk7 5G (2012-2020)  Volkswagen Jetta Mk5 1K (2005-2010)  Volkswagen Jetta Mk6 A6 (2011 on)  Volkswagen Passat B6 & B7 Typ3C (2006-2013)  Volkswagen Passat CC 35 (2008-2012)  Volkswagen Scirocco Mk3 (2008 - 2017)  Volkswagen Sharan Mk2 (2010 on)  Volkswagen Tiguan Mk1 (2007 - 2017)  Volkswagen Touran (2003-2015)  Volkswagen Touran (2017 on)  Volkswagen CC (2012 - 2017)  Volkswagen Eos (2006-2015)  

Read more less

When using the car on track it is impossible to setup proper rear camber with OEM arms. The more stress you put on the OEM arms the more the rubber on arm compresses and you loose what was very precisely set during car alignment.  Now it is possibile to easily setup and maintain desired camber on your track car. For that reason we have come up with inserts for wheel bearing housing and rear lower wishbone that the spring sits on. Our inserts use metal to metal uniball just like used in Porsche RS line (GT2RS, GT3RS). Tested intensively on our Track TTRS. Product functionalities:– no rubber to bend, you will not loose the geometry while cornering that was set when doing aliment Features:– CNC machined form 7075 aluminium and anodized in black and silver– M18 and M16 uniball– metal bushings galvanized in black What is included:– four inserts (this is a kit for one car) Used in  cars (type numbers in brackets): 2013 +  Audi A3/S3/RS3 (8V & 8VFL MQB) 2013 +  Audi A3 (8V & 8VFL MQB) 2015 +  Audi TT/ TTS /TTRS (8S MQB) 2013 + Volkswagen Golf/GTI (Mk7 MQB + Mk8) 2013 + Volkswagen Golf/GTI/R (MkVII MQB) 2012 + Seat Leon (5F MQB) 2017 + Audi Q2 (quattro) Replaces:– 1K0505553A / 1K0 505 553A – uprights bush– 5Q0505553 / 5Q0 505 553 – inner bush Note: Installation of this rear insert kit will introduce some additional some NVH (noise, vibration, and harshness) transfer into the cabin.

Read more less

TECHNICAL DATA AIRTEC Motorsport billet dogbone mount insert for MQB EA888. Designed to fill the larger void in the stock mount, to limit engine movement without loosing ride quality or introducing any unwanted addition road noise, vibration or harshness into the cabin. By fitting the AIRTEC Motorsport billet mount insert this restricts any wheel hop possible on harsh acceleration to ensure a smoother driving experience. Unlike other polyurethane options available, the billet mount will not wear over time. AIRTEC part no: ATMSVAG6

Read more less

Lower Motor MountTwin Dogbone Inserts.MQB/MQB Evo models. Get your power to the road or track where you need it!   The Twin Dogbone Inserts fill the large voids in the factory lower engine mount with two billet inserts, limiting drivetrain movement for greatly improved strength and a much more enjoyable drive. What do they do? The RacingLine upper and lower Twin Dogbone Mount Insert is one of the most affordable and transformative upgrades you can do to your MQB/MQB Evo car.    By slipping the RacingLine Twin Dogbone Insert into the voids of your factory lower engine mount you will stiffen the whole location of the drivetrain greatly to give a much tighter, sharper, more responsive feeling to your car.    Crucially, fitting both the two-piece upper and lower inserts of the RacingLine Twin Dogbone Insert eliminates the bending forces that can cause damage and ultimately failure if just one insert is fitted (as many others offer).  The RacingLine Twin Dogbone Insert limits the compliance of the lower engine mount by filling the large voids with our two billet inserts. All of the forwards/backwards rocking movement in your drivetrain is controlled by this Lower Mount – fitment of the RacingLine Twin Dogbone Insert adds strength to the drivetrain, helping to protect from future wear and breakages. The risk of wheel-hop under hard acceleration is almost eliminated as the whole engine and 'box assembly is firmly prevented from juddering when wheelspin occurs and through aggressive gearchages. Fitment of the Twin Inserts will only add a minimal increase NVH to the car’s characteristics, but most keen drivers love the sense that they are more 'connected' to their car, and the gentle 'growl' that the mount conveys.  Transformed Drive Transform the drive through eliminating wheel-hop off the line and through aggressive gearchanges - especially valuable on FWD cars. Durability guaranteed Unlike polyurethane or steel insert options on the market, this billet aluminum part will not deform and wear over time, and guarantees long-lasting performance. Twin Protection The Twin Dogbone Insert uses not one but two precision machined billet inserts to avoid the damaging bending moment that comes from fitment of a single insert. Added Strength Machined from billets of T6061 Aluminium, the Twin Dogbone Insert is more than strong enough to keep the drivetrain properly located on high power, hard driven cars. Twin Inserts.Working together. Upper Insert: slides into the voids along the rear side of mount. Lower Insert: inserts into the voids from underneath.  Confirmed Applications. MQB & MQB 'evo' 2.0 TSI, 1.8 TSI, 2.5 TFSI, 2.0 TDI MODELS VWR150003/4 see below to identify which type > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq vRS 2018+   Select yourcorrect version. The factory mount comes in two version across MQB models. To ensure fitment on your vehicle, please visually verify the mount you have, then select the correct insert below:  OE part: 5Q0 198 037 A – You’ll require the Version 1 Insert OE part: 5Q0 198 037 F – You’ll require the Version 2 Insert We recommend a visual check to make certain you have the right version:   Precision Engineered forPerfect Performance. Each Twin Dogbone Insert start life as a billet of T6061 Aluminium, before being precision CNC-machined into shape Carefully developed for minimal transference of NVH through to the cabin RacingLine’s trademark black anodised finish for durability over many years Engineered to slip easily into the voids In factory lower mount Easy, straightforward installation designed to be fitted without subframe removal takes minutes  

Read more less

Racingline Performance Race 4-Way Remote Coilover Kit These are designed for race cars, not your every now and again track go'er Fully custom for your car and your needs with the as much adjustment as a race car needs! ** THESE ARE CUSTOM BUILT SO WILL NOT BE AVAILABLE FOR SPEEDY DELIVERY AND ONCE MADE WILL NOT BE RETURNABLE** Vehicle Fitment: Shop By Car/Volkswagen/Jetta Mk6 Suspension/Coilovers Shop By Car/SEAT/Leon Mk2 (1P) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Volkswagen/Jetta Mk5 Shop By Car/Volkswagen/EOS Shop By Car/Volkswagen/Scirocco/Coilover Kits Shop By Car/Volkswagen/Golf Mk5/Coilover Kits Shop By Car/Volkswagen/Golf Mk6/Coilover Kits Shop By Car/Skoda/Octavia Mk3 (5E)/Coilover Kits Shop By Car/Audi/A3 (8P 03-13)/Coilover Kits Shop By Car/Audi/A3 (8V 12-20)/Coilover Kits Shop By Car/Audi/S3 (8P)/Coilover Kits Shop By Car/Audi/TT RS (8J)/Coilover Kits Shop By Car/SEAT/Leon Mk3 (5F)/Coilover Kits Shop By Car/Skoda/Octavia Mk2 (1Z)/Coilover Kits Shop By Car/Volkswagen/Beetle (16)/Coilover Kits

Read more less

Racingline Performance Race 3-Way Remote Coilover Kit These are designed for race cars, not your every now and again track go'er Fully custom for your car and your needs with the as much adjustment as a race car needs! ** THESE ARE CUSTOM BUILT SO WILL NOT BE AVAILABLE FOR SPEEDY DELIVERY AND ONCE MADE WILL NOT BE RETURNABLE** Vehicle Fitment: Shop By Car/Volkswagen/Jetta Mk6 Suspension/Coilovers Shop By Car/SEAT/Leon Mk2 (1P) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Volkswagen/Jetta Mk5 Shop By Car/Volkswagen/EOS Shop By Car/Volkswagen/Scirocco/Coilover Kits Shop By Car/Volkswagen/Golf Mk5/Coilover Kits Shop By Car/Volkswagen/Golf Mk6/Coilover Kits Shop By Car/Skoda/Octavia Mk3 (5E)/Coilover Kits Shop By Car/Audi/A3 (8P 03-13)/Coilover Kits Shop By Car/Audi/A3 (8V 12-20)/Coilover Kits Shop By Car/Audi/S3 (8P)/Coilover Kits Shop By Car/Audi/TT RS (8J)/Coilover Kits Shop By Car/SEAT/Leon Mk3 (5F)/Coilover Kits Shop By Car/Skoda/Octavia Mk2 (1Z)/Coilover Kits Shop By Car/Volkswagen/Beetle (16)/Coilover Kits

Read more less

034Motorsport's Dynamic+ Camster Mounts are engineered to significantly improve handling performance for Volkswagen and Audi MQB & MQB Evo vehicles. Designed as a true drop-in upgrade, the Dynamic+ Camster Mount Pair provides an additional 1.5 degrees of negative camber at each of the front wheels to improve both turn in and cornering grip. 034Motorsport Dynamic+ Camster Mounts also add 1.0 degree of additional caster to each of the front wheels to improve high speed stability and cornering ability. This addition of positive caster increases dynamic negative camber while cornering, maximizing the available grip when turning. Dynamic+ Camster Mounts are the ideal solution for enthusiasts in search of enhanced handling performance, confidence-inspiring grip, and precise steering response. Equally well-suited for the street and track, Dynamic+ Camster Mounts deliver a perfect balance of performance, durability, and comfort. Most importantly, Dynamic+ Camster Mounts provide a fixed camber and caster increase without the cost, noise, and complexity of adjustable camber plates.   DYNAMIC+ CAMSTER MOUNT BENEFITS: Reengineered Suspension Geometry for Performance Driving Additional 1.5 Degrees of Negative Camber at Each Front Wheel (Compared to Factory Strut Mounts) Additional 1.0 Degree of Caster at Each Front Wheel (Compared to Factory Strut Mounts) Significantly Enhanced Cornering Grip Improved Steering Feel & Handling Response Reduced Strut Mount Deflection to Maintain Proper Strut Alignment Under Cornering Load Significantly Reduced NVH (Noise, Vibration, Harshness) Increase Compared to Spherical Camber Plates Billet Aluminum Construction with Replaceable Density Line Rubber Inner Pucks MORE CAMBER, MORE CASTER, MORE GRIP: Dynamic+ Camster Mounts are machined from 6061-T6 Aluminum and feature 75 Durometer Density Line Rubber center pucks to minimize strut shaft deflection, while simultaneously preventing unwanted noise, vibration, or harshness (NVH) from being transmitted into the cabin. The Dynamic+ Camster Mount Pair is fully rebuildable, and includes new high-grade strut mount bolts for installation.These mounts will also eliminate the annoying "squeaking" sound often caused by the stock strut mounts when paired with coilover suspensions. Dynamic+ Camster Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts.Dynamic+ Camster Mounts were tested extensively on the street and at the track with multiple 034Motorsport Development Vehicles before release to ensure that they deliver excellent performance and durability. FEATURES & FITMENT: Features: Complete Drop-In Replacements for Factory Strut Mounts CNC-Machined from 6061-T6 Aluminum with Clear Anodized Finish Proprietary 75 Durometer Rubber Inner Pucks Durable, Rebuildable Design Sold in Pairs - New High-Grade Strut Mount Bolts Included FITS: Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/RS3 (8V)/Bushes Shop By Car/Audi/TT RS (8S)/Bushes Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4 Shop By Car/Audi/S3 (8Y)

Read more less

Racingline Brake Kit 5mm Hub Adaptor (Pair) 5×112 – VWR620005MM Clearance over big brake kits is always a challenge, especially with factory wheels. All of RacingLine’s brake kits feature our unique design that allows these 5mm Hub Adaptors to be solidly, mechanically mounted onto the front face of the disc to give you that extra clearance. No more adding loose spacers onto your car. Fitting and removal of the Hub Adaptor is a simple, reversible upgrade that takes minutes to do. If you ever plan to change wheels in the future, or if you run different wheels for road or track, or winter and summer, just fit or remove the adaptors to suit. As these Hub Adaptors are mechanically locked onto the disc hub, They aren’t  classified as spacers in countries where spacers are illegal. The 5mm of extra space will mean that the OEM factory wheels will fit over our brake kits. POSITIVE FIXATION  Clever ‘petal’ design (female on the disc, male on the Hub Adaptor) plus a fixing screw physically locks the two parts together. HIGH QUALITY Beautiful midnight-black gloss anodised finish will keep the Hub Adaptors looking beautiful and  corrosion -free. INSTALL & REMOVE Removal and refit just takes minutes to do if you ever change your wheels. Perfect for the: RacingLine Stage 2 Monoblock Performance Brake Kit RacingLine Stage 3 Forged Monoblock Performance Brake Kit​ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR620005MM

Read more less

Racingline MQB Propshaft Bearing Alignment Kit Our new MQB RacingLine Propshaft Bearing Alignment kit cuts out the factory tolerances to maintain accurate propshaft alignment every time, all of the time. Our precision-engineered, Propshaft Bearing Alignment Kit centralises the factory centre support bearing carrier by cutting out the enlarged factory hole tolerances. Meaning your propshaft is held in perfect true orientation at all times. The oversize holes on the factory brackets are designed to allow several degrees of ‘twist’ on the centre bearing carrier, causing unnecessary long-term stresses on the prop, bushes and bearings. That may be great to help the factory with quick production-line assembly, but will lead to accelerated wear on the bush and rubber housing from misalignment. Every hard launch & shift provokes movement in the drivetrain – over time this risks shifting the factory prop mount out of alignment. This simple alignment kit reduces the bolt hole size down from M14 to M8, allowing no further twist from the brackets and ensuring that your prop cannot move from this position. Fit this Propshaft Bearing Alignment Kit once, then forget it. Drive your car safe in the knowledge that your propshaft will remain in the correct alignment forever more and prolong the life of the bearings and bushings. Prior to our development, we were amazed how many cars were out of alignment from factory! Confirmed Applications For all MQB & MQB Evo AWD modelsVWR810009 VW Golf 8 R 2020+VW Golf 7 & 7.5 R 2013-2020VW Passat 2.0 BiTDI 4Motion B8 2015+VW Arteon 2.0 BiTDI 4Motion 2017+VW Arteon R 2.0 TSI 320ps 2020+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 BiTDI 2016+ Audi S3 8Y 2020+Audi S3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon III Cupra ST 4Drive 5F 2017-2020SEAT Tarraco 2.0 TSI 190ps 2018+Cupra Ateca 2018+Cupra Formentor 310PS 2020+ Skoda Superb III 2.0 TDI 3V 2015-2020Skoda Kodiaq vRS 2018+

Read more less

Racingline Front Subframe Brace for MQB/MQB EVO MQB & MQB ‘evo’ cars rely on either a thin stamped-steel or cast alloy OE front subframe. This subframe has to channel all of the immense forces generating by hard driving. ​RacingLine’s bolt-in Front Subframe Brace provides much needed support and rigidity to aid accurate handling dynamics. Not surprisingly, with all of these forces combining in your subframe, significant deflection results, which affects wheel alignment and harms the precision in your steering as it flexes. RacingLine’s Billet Front Subframe Brace stiffens up the rear of the subframe with an intricately machined aluminium replacement, greatly improving stiffness under load. Despite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. This is a highly recommended upgrade to protect and enhance your car – whether it’s hard-driven, high-power or used on track. Confirmed Applications For all MQB & MQB EVO AWD ModelsVWR810006 VW Golf 8 GTI 2020+VW Golf 8 GTI Clubsport 2020+VW Golf 8 R 2020+VW Golf 7 & 7.5 GTI & Clubsport 2013-2020VW Golf 7 & 7.5 R 2013-2020VW Golf 7 & 7.5 2013-2020VW Passat 2.0 TSI B8 2015+VW Arteon 2.0 TSI 2017+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 TSI 2016+VW Jetta VII GLI 2018+ Audi S3 8Y 2020+Audi A3 8Y 2020+Audi S3 8V 2013-2020Audi A3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon IV FW 2020+SEAT Leon III Cupra 5F 2014-2020SEAT Tarraco 2.0 TSI 2018+SEAT Leon III 5F 2015-2020 Cupra Leon IV FW 2020+Cupra Ateca 2018+Cupra Formentor 2020+ Skoda Octavia IV vRS NX 2020+Skoda Octavia IV NX 2020+Skoda Octavia III vRS 5E 2014-2020Skoda Superb III 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR810006

Read more less

** Catalogue Images may differ from delivered product ** All new PERFCO premium wheel spacer Fits: Alhambra (7MS/7N) - Altea  (5P) - León II (1P) / León III (5F) - Toledo III (5P) - Exeo (3R) - Ateca (5EP) ('16+) Literally putting our name on the line, we had to ensure we offer a premium product. Our Perfco Performance spacer kits are manufactured in Italy, machined from billet aluminium and feature a black anodised finish. European manufacture not only helps us to ensure European quality, but it also allows better supplier communication and lead times on specialist orders, which in turn allows us to offer improved service to you. Kits come complete with extended wheel bolts / wheel nuts (where required). We are also able to supply extended locking wheel nuts to simplify the buying process for you. Perfco Performance premium wheel spacer kits cater all popular applications from Audi to Volkswagen

Read more less

Please note: spacers are sold as PAIRS! If you want to do front and rear than qty x2 is needed! 5x112 Stud Pattern - 57 Centre Bore Eibach Pro-Spacer Kit 10mm - 10mm per Spacer 12mm - 12mm per Spacer 15mm - 15mm per spacer 20mm - 20mm per Spacer 25mm - 25mm per Spacer Please check if this spacer will fit your car before ordering as they are none returnable! Contact support@ceuk.org if you are unsure! PRO-SPACER | Wheel Spacers Made from high-tensile-strength aluminium alloy Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance All applications tested in rigid durability and fatigue tests High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021) Significant weight advantage compared to wheel-spacers made from steel Eibach Pro-Spacer is the ideal combination for use with the Eibach Pro-Kit as well the Sportline, if the original or aftermarket wheels are missing that last optical "kick". With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch. That's how the cars look gets its final touch. By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behaviour combined with higher stability, as the roll of the chassis is influenced in a positive manner. Optimize the "sportive touch" to the last detail: wheels, tires, Eibach Suspension Components and Pro-Spacer! You'll achieve optimum looks and enhanced handling by moving your wheels flush with the outer edges of the wheel wells. Simply measure the wheel-well/tyre gap, as shown here, and order the corresponding Pro-Spacers to put your wheels and tyres out where they belong. Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less

Racingline Billet Underbody Tunnel Braces Want to sharpen up your MQB handling responses? MQB Billet Underbody Tunnel Braces mount under the body to help fight body flex. This improves rigidity to help refine the handling, whilst also providing valuable extra clearance for larger diameter exhaust system. What do they do? MQB cars rely on thin stamped-steel OE tunnel braces underneath in an attempt to reinforce the body’s weaker points and limit chassis flex under demanding loads. Our new Billet Underbody Braces replace these weak braces with intricately machined aluminium replacements, greatly improving stiffness, giving much better exhaust clearance and even look great! CNC Machined from a solid billet of 6061-T6 Aluminium, each brace has been engineered to remove unnecessary material whilst still increasing rigidity. With any 3″ diameter exhaust system, the OE brace gives insufficient clearance. So rather than removing the tunnel brace, our new Rear Tunnel Brace at last gives you the option to replace it, giving you the clearance you need plus maintaining crucial body stiffness. Despite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The brace designs mean that installation is simple, using existing body mounting points with no drilling or trim removal required, ensuring fitment is completely reversible. We offer two braces – a Centre and a Rear Tunnel Brace. Owners of FWD cars can fit both, AWD cars can only fit the Rear Tunnel Brace. Looking to fit a larger bore Exhaust System? For large diameter aftermarket exhausts, there simply isn’t clearance space above the factory tunnel brace. Many owners have no choice but to remove the brace. But the brace is there for a reason. With the extra clearance our Rear Tunnel Brace gives, you can now maintain strength and fit your bigger exhaust. VWR810005 – Rear Tunnel BraceVWR810004 – Centre Tunnel Brace (Front-wheel drive only)

Read more less

034Motorsport is proud to offer Street Density Rear Shock Mounts for the MkVII Volkswagen Golf/GTI & 8V Audi A3 FWD! Street Density Rear Shock Mounts for the MkVII Volkswagen Golf/GTI & 8V Audi A3 FWD are engineered for increased performance and durability over the factory rear shock mounts. Featuring 50 Durometer Density Line Rubber, these performance rear shock mounts are able to cope with increased loads from spirited driving and upgraded suspension components. Designed to be a complete, drop-in replacement for the factory rear shock mounts, Street Density Rear Shock Mounts significantly reduce deflection under hard cornering, which helps maintain proper suspension geometry for better handling. In addition, the Density Line Rubber features enhanced bonding to the cast aluminum mount body - reducing the likelihood of separation and dreaded "clunk" associated with the factory mounts. Features: Complete, Drop-In Replacement for Factory Rear Shock Mounts Manufactured with 50 Durometer Rubber High-Quality Cast Aluminum Mount Body Reduced Strut Deflection for Improved Handling Vulcanized Rubber for Increased Longevity Replaces: 5Q0513353G / 5Q0 513 353 G Fitment: (2wd Only) Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes

Read more less

034Motorsport Stainless Steel Subframe Locking Collar Upgrade Kit - MQB Models W/Steel Subframe 034Motorsport is pleased to present the Stainless Steel Subframe Locking Collar Upgrade Kit for the Steel-Subframe MQB Models!Designed to center the subframe using precision-engineered stainless steel insert bushings and large-diameter bolts, this kit eliminates clunks caused by the subframe shifting, and increases chassis rigidity for improved handling performance. This kit addresses subframe clunk/pop/creak which presents itself when taking slow turns, entering driveways, coming to a stop, and starting from a standstill. These locking collars and new factory bolts are a permanent, affordable solution to address the fundamental issue with the factory subframe design. The upper and lower collars in our kit are specifically machined to locate the subframe and bolts perfectly and ensure hassle-free installation. The supplied bolts feature factory-correct tips and thread engagement points to prevent thread stripping. Unlike other kits on the market that use softer alloys, our MQB Subframe Locking Collars are made from stainless steel to prevent deformation and ensure a lifetime of performance. Installation is very straightforward and can be performed in approximately one hour. No permanent modification to the subframe is required, and this upgrade is completely reversible. FEATURES: CNC-Machined Stainless Steel Locking Collars Application-Specific Design for Both Upper & Lower Locking Collars Engineered to Properly Locate (Center) Factory Front Subframe & Eliminate Shifting/Clunks Includes New Factory Subframe Bolts Improves Chassis Rigidity & Handling Performance Addresses Volkswagen Subframe Knocking Noise Permanently! Will Not Cause Additional NVH Transfer Inside Cabin Easy, Straightforward Installation Takes Approximately 1 Hour! WHAT'S INCLUDED: 034Motorsport Stainless Steel Upper Subframe Locking Collars (Set of 4) 034Motorsport Stainless Steel Lower Subframe Locking Collars (Set of 4) Factory Replacement Subframe Bolts (Set of 4) FITMENT: Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4

Read more less

Replace your sloppy factory plastic/rubber rear sway bar end links on your 8V Audi A3/S3, MkIII Audi TT/TTS or MkVII Volkswagen Golf/GTI with this new performance engineered spherical set from 034Motorsport! 034Motorsport's MQB Spherical Rear Sway Bar End Links allow for uncompromised transfer of suspension movement to the sway bar, increasing the effectiveness of the rear sway bar and improving handling feel. 034Motorsport's MQB Audi/Volkswagen Spherical Rear Sway Bar End Links utilize Motorsport-Quality Teflon-Lined Aurora COM-8T Spherical Bearings, Billet Aluminum End Link Bodies, and Stainless Steel End Link Spacers to ensure optimum performance. These spherical end links are direct replacements for the stock parts, and designed to be fully serviceable and rebuildable. This upgrade was thoroughly tested by 034Motorsport and independent Audi/Volkswagen enthusiasts before release on new MQB chassis vehicles. Installation is very simple, and is completely reversible. Features: CNC Machined 6061-T6 Aluminum End Link Bodies - Anodized Black for Durability CNC Machined Stainless Steel End Links Spacers Motorsport Quality Teflon-Lined Aurora Spherical Bearings Spherical Design Eliminates Deflection and Ensures Proper Articulation Direct Drop-In Replacement for Factory End Links Sold In Pairs Functions: Improved Sway Bar Function More Direct Handling Feel What's Included: 034Motorsport MQB Spherical Rear Sway Bar End Link Pair New Installation Hardware Fitment: Shop By Car/Audi/S3 (8V)/Anti Roll Bars and Links Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Anti Roll Bars and Links Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Anti Roll Bars and Links Shop By Car/Audi/TT RS (8S)/Anti Roll Bars and Links Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Anti Roll Bars and Links Shop By Car/Audi/TT Mk3 (8S)/Anti Roll Bars and Links Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Anti Roll Bars and Links Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4 Replaces: 5Q0505465C / 5Q0

Read more less

034Motorsport's Motorsport TrackSport Mounts for Audi 8V/8V.5 A3/S3 8S TT/TTS and VW Mk7 Golf/GTI/R models are the new standard in ultra-high performance. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives. These mounts have a lifetime guarantee regardless of power level applied and type of track racing they are used for. Motorsport TrackSport Mounts are void-free and fluid-free, eliminating the slop associated with the factory engine/transmission mounts, and are designed to be completely rebuildable with replaceable Density Line rubber bushings. These extreme-duty mounts will increase noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts. HIGH-DUROMETER RUBBER VS. POLYURETHANE: Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings. Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Racing and Extreme Performance Applications Great Solution for Highly-Tuned Stock Turbo and Big Turbo Power Levels Replaceable 65 Durometer Density Line Rubber Bushings with Void-Free Construction Virtually Indestructible Lifetime Warranty Reduced Drivetrain Slop Decreased Engine Movement Under Load More Direct Power Transfer Improved Shifting Feel Complete Drop-In Replacement of Factory Engine/Transmission Mounts Sold in Pairs NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure. FITS: Shop By Car/Audi/S3 (8V)/Engine Mounts Shop By Car/Volkswagen/Golf Mk7/Engine Mounts Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Engine Mounts Shop By Car/Audi/RS3 (8V)/Engine Mounts Shop By Car/Audi/TT RS (8S)/Engine Mounts Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Engine Mounts Shop By Car/Audi/TT Mk3 (8S)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4

Read more less