Performance - Skoda Octavia MK3 5E 2013-2020

AIRTEC motorsport induction kit for the 1.8T & 2.0T MQB platform. Optional extra intake hose upgrade. Designed to fit the 3rd generation EA888 4 cylinder 1.8 & 2.0 turbo charged engine. Will fit the following vehicles: Golf R MK7 Seat Leon MKK3 1.8/2.0 TSI Skoda Octavia MK3 1.8/2.0 TSI VW Golf MK7 1.8/2.0 TSI Audi A3 (8V) 1.8/2.0 TSI Audi S3 (8V) 2.0 TSI AIRTEC part no: ATIKVAG4

Read more less

All Direnza Cold Air Induction Systems are supplied with a high quality, cone style air filter; designed to replace the OEM airbox, offering more surface area compared to the standard filter. Direnza air filters are manufactured from premium grade, washable cotton, ensuring long-lasting performance enhancements. Direnza Cold Air Induction Kits include lightweight alloy pipework mandrel-bent for accurate placement on your vehicle, and coated with a premium grade, black textured finish for a sleek appearance. Designed in-house by Direnza engineers, our Cold Air Induction Kits reduce blockages and significantly enhance air flow into the engine compared with stock induction arrangements, boosting your car’s soundtrack and performance. Heat-resistant silicone hoses are supplied with every Direnza Cold Air Induction Kit. An often-overlooked item, our easy-fit silicones are layered for extra durability, their 5mm wall consisting of four polyester layers finished with jet black pigment. Designed to replace the OE setup, providing up to 50% more filter surface area to help maximise capacity Engineered to help the 2.0TSI engine breathe easier and improve throttle response from your Golf R. Gains in power and torque are noticeable over a larger RPM range A straightforward way to give your VW Golf R a sporty, performance soundtrack Complete kit includes mandrel-bent alloy pipework, high quality cotton filter and high performance silicone hoses Fitment Volkswagen Golf R MK7 2.0TSI 2013+ models Volkswagen Golf R MK7.5 2.0TSI 2013+ models Volkswagen Golf MK7 GTI 2.0TSI 2013+ models Audi S3 8V Quattro 2.0TSI 2013-2020 models Audi A3 8V 2.0TSI 2013-2020 models Audi TT FV 2.0TSI 2014+ models Audi TTS FV 2.0TSI 2014+ models SEAT Leon Cupra 5F 2.0TSI 2012-2020 models  SEAT Leon SC 5F 2.0TSI 2012-2020 models Skoda Octavia VRS MK3 2.0TSI 2012-2019 models OEM Part Number 5Q0129607AG

Read more less

TECHNICAL DATA AIRTEC spec replacement air filters designed to suit a range of different AIRTEC induction kits. We have worked with a leading brand to create our ideal spec foam air filters to increase performance, enhance sound and look great under the bonnet! Please see below for model applications and then chose from the drop down menu for the correct filter. AIRTEC-CC-175-70: Fiesta Mk7 1.6 ST180 Stage 2 & Stage 3 induction kit Fiesta Mk8 1.5 ST200 induction kit AIRTEC-CC-501-70: Fiesta Mk7 1.0L EcoBoost Stage 2 induction kit Fiesta Mk8 1.0L EcoBoost induction kit Renault Clio 200/220 EDC induction kit(s) Renault Meglio (Megane Powered Clio) induction kit Renault Megane RS250 induction kit AIRTEC-CC-175-80: MQB 1.8T/2.0T EA888 induction kit (Golf R, Audi S3 8V etc.) Vauxhall Astra H VXR induction kit Mini F56 JCW induction kit Ford S-Max 2.5T induction kit AIRTEC-CC-175-90: Vauxhall Astra J VXR induction kit AIRTEC-CC-107L-JS: Nissan R35 GT-R induction kit AIRTEC-RP-902: Mercedes A45 AMG induction kit

Read more less

All Direnza Cold Air Induction Systems are supplied with a high quality, cone style air filter; designed to replace the OEM airbox, offering more surface area compared to the standard filter. Direnza air filters are manufactured from premium grade, washable cotton, ensuring long-lasting performance enhancements. Direnza Cold Air Induction Kits include lightweight alloy pipework mandrel-bent for accurate placement on your vehicle, and coated with a premium grade, black textured finish for a sleek appearance. Designed in-house by Direnza engineers, our Cold Air Induction Kits reduce blockages and significantly enhance air flow into the engine compared with stock induction arrangements, boosting your car’s soundtrack and performance. Heat-resistant silicone hoses are supplied with every Direnza Cold Air Induction Kit. An often-overlooked item, our easy-fit silicones are layered for extra durability, their 5mm wall consisting of four polyester layers finished with jet black pigment. Designed to replace the OE setup, providing up to 50% more filter surface area to help maximise capacity Engineered to help the 1.6 diesel engine breathe easier and improve throttle response from your VW Gains in power and torque are noticeable over a larger RPM range A straightforward way to give your Golf a sporty, performance soundtrack Complete kit includes mandrel-bent alloy pipework, high quality cotton filter and high performance silicone hoses Fitment Volkswagen Golf MK7 1.6 TDI 2013-2020 model

Read more less

Ramair Jetstream Induction & Turbo Intake Kit (JSK + TI) for vehicles utilizing the MQB chassis platform equipped with the 2.0 TSI (EA888) engine. This kit allows for increased airflow and induction noise over the factory air intake equipment. This kit mounts to standard factory mounting points and rubbers. The kit comprises of… Oversize Turbo Intake Elbow This part allows for increased potential airflow and slightly increased induction sound. The inlet elbow is made from light weight aluminium tube with CNC machined connections and a laser cut bracket, is fully TIG welded and powder-coated in a textured black finish for an OEM look. Jetstream Performance Baseplate Filter Our performance foam air filter, with stainless steel cage construction for superior internal structural support and a spun aluminium neck designed to act as a velocity stack, minimizing turbulence in the intake tract, maximizing flow. The filter element has quick release fittings to enable quick removal, allowing for easy cleaning & maintenance. Silicone Intake Pipe Single piece turbo intake pipe made with 5-ply polyester reinforced silicone, maintaining a constant 80mm diameter and providing excellent protection from high engine bay temperatures. Heat Shield with OEM mounting points Laser cut, precision folded heat shield powder-coated in black, is designed to fit directly to the standard OEM factory air box mounting points and rubbers without the need for modification. The heat shield helps maintain low intake temperatures by providing a physical barrier between the air filter and the rest of the engine bay and directing the air from the factory cold air feed to the area around the filter. Full Fitting Kit Includes all nuts bolts, hose clamps and high quality silicone hose connectors necessary to fit the kit to a standard car (This kit requires utilization of some components from the standard intake pipe and air box). Full Fitting Instructions with Photos Fully detailed step-by-step instructions to guide you through the installation process. This Kit Fits: Audi A3 (8V) 1.8 TFSI 2012 - 2020 Audi A3 (8V) 2.0 TFSI 2012 - 2020 Audi Q3 (F3) 40 TFSI 2.0 2018 - 2020 Audi Q3 (F3) 45 TFSI 2.0 2018 - 2020 Audi S3 (8V) 2.0 TFSI 2016 - 2020 Audi SQ2 (GA) 2.0 TFSI 2018 - 2020 Audi TT (FV) 1.8 TFSI 2015 - 2020 Audi TT (FV) 2.0 TFSI 2014 - 2020 Audi TT (FV) 40 TFSI 2.0 2018 - 2020 Audi TT (FV) 45 TFSI 2.0 2018 - 2020 Audi TTS (FV) 2.0 TFSI 2014 - 2020 SEAT Ateca (KH) 0 TSI Cupra 2018 - 2020 SEAT Leon (5F) 1.8 TSI 2013 - 2020 SEAT Leon (5F) 2.0 TSI Cupra 2014 - 2020 Skoda Karoq (NU) 2.0 TSI 2019 - 2020 Skoda Octavia (5E) 1.8 TSI 2013 - 2020 Skoda Octavia (5E) 2.0 TDI RS 2013 - 2020 Skoda Octavia (5E) 2.0 TSI RS 2013 - 2020 Skoda Superb (3V) 1.8 TSI 2015 - 2020 Skoda Superb (3V) 2.0 TSI 2015 - 2020 VW Arteon (3H) 0 TSI 2017 - 2020 VW Golf (mk7) 2.0 TSI/GTI/R 2013 - 2020 VW Golf (mk7) 2.0 TSI GTI Clubsport 2016 - 2020 VW Golf (mk7) 2.0 TSI GTI TCR 2019 - 2020 VW Passat (3G) 1.8 TSI 2015 - 2020 VW Passat (3G) 2.0 TSI 2015 - 2020 VW T-Roc 2.0 TSI R 2019 - 2020 VW Tiguan (AD) 0 TSI 2016 - 2020 VW Tiguan Allspace (BW) 2.0 TSI 2017 - 2020 VW Touran 1.8 TSI 2015 – 2020

Read more less

Ramair Jetstream Induction & Turbo Intake Kit (JSK + TI) for vehicles utilizing the MQB chassis platform equipped with the 2.0 TSI (EA888) engine. This kit allows for increased airflow and induction noise over the factory air intake equipment. This kit mounts to standard factory mounting points and rubbers. The kit comprises of… Oversize Turbo Intake Elbow This part allows for increased potential airflow and slightly increased induction sound. The inlet elbow is made from light weight aluminium tube with CNC machined connections and a laser cut bracket, is fully TIG welded and powder-coated in a textured black finish for an OEM look. Jetstream Performance Baseplate Filter Our performance foam air filter, with stainless steel cage construction for superior internal structural support and a spun aluminium neck designed to act as a velocity stack, minimizing turbulence in the intake tract, maximizing flow. The filter element has quick release fittings to enable quick removal, allowing for easy cleaning & maintenance. Silicone Intake Pipe Single piece turbo intake pipe made with 5-ply polyester reinforced silicone, maintaining a constant 80mm diameter and providing excellent protection from high engine bay temperatures. Heat Shield with OEM mounting points Laser cut, precision folded heat shield powder-coated in black, is designed to fit directly to the standard OEM factory air box mounting points and rubbers without the need for modification. The heat shield helps maintain low intake temperatures by providing a physical barrier between the air filter and the rest of the engine bay and directing the air from the factory cold air feed to the area around the filter. Full Fitting Kit Includes all nuts bolts, hose clamps and high quality silicone hose connectors necessary to fit the kit to a standard car (This kit requires utilization of some components from the standard intake pipe and air box). Full Fitting Instructions with Photos Fully detailed step-by-step instructions to guide you through the installation process. This product is suitable for the following vehicles.... Make Model Engine Years Audi A3 (8V) 2.0 TFSI 2013 - 2020 Audi A3 (8V) 1.8 TFSI 2013 - 2020 Audi S3 (8V) 2.0 TFSI 2013 - 2020 Seat Leon (5F) 2.0 TSI Cupra 2013 - 2020 Seat Leon (5F) 2.0 TSI 2013 - 2020 Seat Leon (5F) 1.8 TSI 2013 - 2020 Skoda Octavia (5E) 2.0 TSI 2013 - 2020 Skoda Octavia (5E) 1.8 TSI 2013 - 2020 Volkswagen Golf (mk7) 2.0 TSI R 2013 - 2020 Volkswagen Golf (mk7) 2.0 TSI GTI 2013 - 2020 Volkswagen Golf (mk7) 2.0 TSI 2013 - 2020 Volkswagen Passat (B8) 2.0 TSI 2015 - 2020 Volkswagen Passat (B8) 1.8 TSI 2015 - 2020 Please use the vehicle look up tool at the top of the page to confirm fitment.

Read more less

2.0 TSI EA888.3 & 3BTurbo Muffler DeleteFor all VW, Audi, Cupra, Skoda 2.0 TSI A smooth, turbulence-free air path exiting your turbo with the RacingLine 2.0 TSI Turbo Muffler Delete. What theTurbo Muffler Deletedoes. Our Turbo Muffler Delete is a sleek single billet design which replaces the restrictive, power-robbing compressor outlet with a smooth, turbulence free air path exiting the turbo. The standard part is located on the outlet of the turbo compressor and is simply designed to reduce engine bay acoustics. Whilst it subdues the harmonic noises generated by the turbo, it also adds in disruptive turbulence to the airflow right where you don't want it.   By replacing the standard part with our maximum diameter Turbo Muffler Delete, you’ll replace this unwanted restriction with a smooth CFD-developed uninterrupted air path.  The result: noticeably better boost response giving a little more power and throttle reaction, all the while being able to actually hear your turbo working. COMPATIBILITY The Turbo Muffler Delete is compatible with all MQB EA888.3 1.8T and 2.0T cars. An essential fit with any upgraded intake system. TURBO SOUNDS By smoothing the airflow path out of the turbocharger, eliminating the restriction and turbulence caused by the OEM part, you'll at last be able to hear your turbo working! EASY FIT Fitting is straightforward. The kit is installed in around 30minutes using just hand tools.   And easily returned to standard, should you ever wish. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. CNC constructed from single-piece billet T6-6061 aircraft grade aluminium. Hand polished then anodised in gloss midnight black to look good, and stay looking good. Maximum diameter smoothed internal bore for max airflow. The white laser-etched RacingLine logo is all part of the detail. CONFIRMED APPLICATIONS 2.0 TSI & 1.8 TSI EA888 gen.3 & gen.3B engines VWR160001  > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

2.0 TSI Turbo 90 Inlet.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3VWR12G7R600ITINLET  The RacingLine 2.0 TSI Turbo Inlet is an essential addition to your airflow package - ultra-thin-wall, double O-ring flow from intake straight into turbo What the 2.0 TSI Turbo Inlet does. A simple fitment, the ultra-thin-wall VWR High-Flow Turbo 90 Inlet is a large diameter, free flowing intake elbow, delicately CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.  The factory inlet forces the airflow to taper right down to pass through a tight and restrictive bend - in other words, terrible for flow.  The RacingLine Turbo 90 is the thinnest-wall construction on the market for highest flow. Twin O-rings ensure the perfect seal. Some of our rivals' less carefully-machined, or even thick cast versions rob valuable airflow. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting the Turbo 90. An essential upgrade! COMPATIBILITY The Turbo 90 Inlet is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS Take away the standard plastic elbow's highly restrictive airflow path through to the turbo. The ultra-thin wall VWR High-Flow Turbo 90 gives a worthwhile power gain through smoothing and opening up that turn into the turbo. EASY FIT Fitting is very straightforward. Twin O-rings ensure perfect seal. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered forperfect performance. The white laser-etched RacingLine logo is all part of the detail. Twin nitrile O-rings for the perfect seal. CNC constructed from T6-6061 aircraft grade aluminium. Hard anodised in gloss black to look good, and stay looking good. Maximum diameter ultra-thin wall smoothed internal bore for max airflow. SPOT THE DIFFERENCE CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

A must have for R600 intakes, Racingline Underhose Our new R600 Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look. Includes a factory one-way valve incorporated, just like the original; don’t run your car without this valve! CONFIRMED APPLICATIONS VWR17 G7R600 FOR CARS WITH R600 FITTED > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Ateca 2.0 TSI 190hp 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ > Skoda Kodiaq 2018+ > Skoda Kodiaq 2.0 TSI 190hp 2018+

Read more less

K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for the majority of vehicles on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Designed to boost horsepower and rate of acceleration. Can be cleaned and used again. High air flow with exceptional filtration. Lasts up to 50,000 miles before cleaning is required depending on driving conditions. Works with original equipment manufacturer vehicle electronics. Emissions legal in all 50 US states- Will NOT void vehicle warranty. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be the last air filter your vehicle will ever need.Million Mile Limited Warranty®

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

APR Carbon Open Intake System - MQB - 1.8T and 2.0T EA888 Gen 3The APR Open Carbon Fiber Intake System is the ultimate intake system for the 1.8T/2.0T Engine! We've maximized performance and sound dramatically by reducing pressure drop and increasing airflow. This translates to more horsepower and torque, and less physical strain on the turbocharger. The system looks great, sounds amazing, and produces more horsepower and torque you can feel.Our beautiful carbon fiber intake system does away with the closed airbox design and uses a massive 7" washable and reusable cotton filter with a frontal inlet and 4" rear outlet. This was necessary to limit pressure drop across the factory system and maximize airflow, while allowing you to fully hear the engine breathe! The massive filter provides excellent filtration. By oversizing the filter, we're able to limit pressure drop without sacrificing filtration. This is made possible through the use of greatly increased filter surface area. Carbon fiber not only looks great, but it allows us to make a complex and organic heat shield shape that keeps hot air pushed through the frontal radiator away from the intake tract. Furthermore carbon fiber allows us to limit wall thickness on the intake pipe, maximizing the pipe's internal diameter and thus airflow. Lastly, carbon fiber retains heat less than other materials, such as metal, making it ideal for performance.The factory intake system simply can’t match the performance of our intake system. The full factory frontal airbox only flows 521 CFM at 28” of H2O. We improved this by 60% with our open airbox, which flows 833 CFM by comparison! However, it’s important to always look at the intake system as a whole as flow numbers alone don’t always speak to the broader picture. The factory turbocharger can only flow just under 400 CFM through the factory opening, and any intake system will lessen maximum flow. The goal is to minimize all restrictions before the turbocharger as much as possible to maximize performance. The full factory system brings this down to 275 CFM, or 31% less. The full APR System (Open airbox, rear pipe, and turbo inlet pipe), bring this down to 345 CFM, which is only 13% less, or a 25% improvement over stock! This directly translates to more power you can feel. Our full bolt on APR Tuned S3 saw max gains of 12 AWHP and 13 AWFT-LBS of torque using the full intake system compared to stock! These are solid gains that make a noticeable difference in performance! FITS: Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)

Read more less

APR Carbon Intake System - MQB 1.8T / 2.0T EA888 Gen 3 The APR Carbon fibre Intake System is an attractive high performance upgrade for the latest 1.8T and 2.0T engines as found in various MQB platform vehicles. The factory intake design has the foundation for excellent performance, but much of this is sacrificed in an effort to meet other design requirements. With requirements set forth for only supporting factory power output levels, low engine sound levels and long service intervals, there is plenty of room for improvement. The APR Carbon fibre Intake System increases performance primarily by improving mass airflow through the system while still proving adequate filtration. Expect greater horsepower and torque through the power band with a more direct and responsive feel upon pressing the throttle. Sounds from the engine and turbocharger are enhanced and some may even experience better fuel economy depending on driving style.Research and Development: Uncommon to most in the market today, APR spared no expenses during the research and development period. For the better part of a year, APR’s Mechanical Engineers created several prototype intake designs utilizing our in house Sterolithography 3D printer and other rapid prototyping techniques. Various filter mediums were tested in conjunction with the new intake designs through simulated models, flow bench analysis, dyno data collection and in real world applications all in an effort to derive the best possible solution.Intake Air Temperature Management: Intake air temperature (IAT) plays a critical role in engine performance, especially on turbocharged engines where the ambient air temperature is raised twice through both compression via the turbocharger, and then again during the engine’s compression stroke. In an effort to maintain the lowest possible starting IAT, the APR Intake system begins by drawing air from the coldest possible location, which is the front end of the vehicle before the radiator. Air travels a short path through the intake system, past the filter and on its way to the turbocharger through a sealed intake design that prevents ingestion of hot, under-hood air. Finally, the intake’s carbon composite design features a thin fibreglass backing, which improves thermal insulative properties. Filtration: APR’s design requirements called for an intake filter medium that exhibited high flow capabilities, long service life and adequate filtration properties. While traditional paper filters and even some foam filters can achieve one or more of these requirements, only a pleated cotton filter was able to achieve all three. This is due in part to the intake housing’s volute design and turning vanes. With even pressure flow distribution across the entire filter element, the filter is loaded more evenly, retaining performance over time, increasing the length of the maintenance intervals, and increasing the filter's effectiveness.Sound: In an effort to please customers unaware of the sounds caused by turbocharging an engine, as well as cross platform use on both economy and performance oriented vehicles, the OEM was tasked with creating an intake that many would consider to be too quiet for a performance vehicle. APR’s design requirements called for an intake system that only delivered the engine’s true turbocharged sound as air is sucked through the turbocharger or exhausted from the diverter valve upon lifting off the throttle. The inherent stiffness of carbon fiber composite material results in an induction resonance from the engine allowing the occupants to hear a clean and crisp intake note without being overbearing or cheap sounding in nature.Installation: The intake system comes pre-assembled from APR ready to be installed in minutes with minimal tools. With the factory unit removed, the intake slips into place and connects to the factory turbo inlet pipe using the OEM hardware without filling the engine bay with additional couplers and hose clamps. Because the system fits in the OEM location, it’s fully compatible with future upgrades from APR, including our larger Stage III Turbocharger Systems.Optional APR Silicone Coolant Hose:The factory coolant hose is designed to be routed over the top of the intake system. However, when routed underneath the intake, it’s far more aesthetically appealing. The APR coolant hose replaces the factory unit and routes cleanly under the intake and around the APR catch can without kinking or adding extra stress to the mounting points. FITS: Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)

Read more less

R600 AIR INTAKEFOR MQB & MQB 'EVO' The RacingLine R600 Intake is the world's most sophisticated and best-selling MQB-platform cold air intake, with a choice of two filter element types. Now with fitment for the latest MQB EVO models such as Golf 8, Audi S3 8Y etc. Now with the added option of Carbon Fibre Lid - your choice of sophisticated Matte Carbon or stunning Gloss Carbon. WHAT'S SOSPECIAL? Looking for the most sophisticated cold-air intake available for your MQB or MQB 'EVO' 2.0 or 1.8 TSI? The R600 intake is our best selling system for this platform. Little wonder, as it combines OEM-standard design and quality with significant power gains on uprated cars. OEM-standards of design, quality, materials and construction, hand-made in the UK. Fits like a factory part; lasts like a factory part. Twin CFD-optimised front intakes extending across the front of the car help achieve lower intake temperatures and worthwhile power gains. Enormous airbox volume houses the filter, complete with thoughtful details like connection to the original factory drain tube, and an SAI connection for US cars. Your choice of filter unit, to suit different needs. Both are double the size of standard - rated right up to 600hp and beyond. TRIFOAM® FILTER UNIT ​ Faster, for longer The highest airflow of all filter types, for the best possible power for more of the time. As a high performance part, regular maintenance is essential to keep it at its very best. VWR12 G7R600 PLEATED COTTON FILTER ​ Fit and forget A robust 'fit and forget' filter that will last for years. It gives great initial power output but doesn't have the dust-loading capacity of Trifoam. VWR12 G7R601 PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Airbox is UK-moulded in factory specification PU Polyurethane PU gives excellent heat-insulation properties, keeping airbox temps lower. Both of our giant filter units are hand-made in the UK. Choose from Trifoam® or Pleated Cotton Every factory mounting point is retained for that perfect fit. GIANT FILTER UNIT It's your choice. Both our unique Trifoam® filter and new Pleated Cotton units are hand-made in the UK for the perfect filtration and minimum restriction. FULL-WIDTH INTAKE Twin front intakes extending across the front of the car help achieve lower intake temperatures and worthwhile power gains. CFD DESIGNED Airflow is no accident. Fully developed with F1-standard CFD programmes. It's no wonder so many high-power MQB cars choose the R600.   CONFIRMED APPLICATIONS 2.0 TSI MQB 'EVO' / EA888.4 engines  NEW! 2.0 TSI & 1.8 TSI MQB / EA888.3 engines ​ VWR1200R600E   Trifoam filter     VWR1210R600EM  Trifoam filter / Matte Carbon    VWR1210R600EG  Trifoam filter  / Gloss Carbon     VWR1200R601E  Cotton filterVWR1210R601EM  Cotton filter  / Matte Carbon    VWR1210R601EG  Cotton filter  / Gloss Carbon > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Tiguan II 2.0 TSI 245ps 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > Cupra Leon IV 300 TSI FW 2020+ > Cupra Leon IV 245 TSI FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+   CONFIRMED APPLICATIONS 2.0 TSI MQB / EA888 Gen.3B 190 hp engine with MAF VWR12G7R602  Trifoam filter      VWR1210R602M  Trifoam filter  /  Matte Carbon    VWR1210R602G  Trifoam filter  /  Gloss Carbon     VWR12G7R603  Cotton filter VWR1210R603M  Cotton filter  /  Matte Carbon    VWR1210R603G  Cotton filter  /  Gloss Carbon   > VW Passat 2.0 TSI 190hp B8 2018+ > VW Arteon 2.0 TSI 190hp 2017+ > VW T-Roc 2.0 TSI 190hp 2017+ > VW Tiguan II 2.0 TSI 190ps 2018+ > Audi A3 40TFSI 2.0 TSI 190hp 2016-2020 > Audi TT 40 TFSI 2.0 TSI 197hp 2018+ > Audi Q2 40 TFSI 2.0 TSI 190hp 2017+ > Audi Q3 40 TFSI 2.0 TSI 190hp 2018+ > SEAT Leon III 2.0 TSI 190hp 5F 2018+ > SEAT Ateca 2.0 TSI 190hp 2017+ > SEAT Tarraco 2.0 TSI 190ps 2018+ > Skoda Octavia III 2.0 TSI 190hp 5E 2017-2020 > Skoda Superb III 2.0 TSI 190hp 3V 2019+ > Skoda Karoq 2.0 TSI 190hp 2018+ > Skoda Kodiaq 2018+ > Skoda Kodiaq 2.0 TSI 190hp 2018+

Read more less

STYLE. WITH SUBSTANCE STUNNING CARBON FIBRE LID FOR R600 The RacingLine R600 Intake is the world's most sophisticated and best-selling MQB-platform cold air intake.If you already have an R600, why not add a Carbon Fibre Replacement Lid update to give your existing R600 intake a whole new look.  WHYUPGRADE? If you’re already running an R600 intake, you’ll know that it’s the most sophisticated intake available, combining OEM-standard design & quality with significant power gains.   But there's more good news. This new R600 Carbon Fibre Lid upgrade now gives you a chance to update your existing R600 with a whole new look in the engine bay. A simple replacement for any existing R600 intake lid. Simply unscrew the old lid and replace with the stunning new Carbon replacement. The quality of our carbon weave and finish is second to none. Offered in your choice of either a sophisticated matte finish, or stunning high gloss surface. Each lid is carefully hand-laid using pre-preg carbon fibre - which means we can achieve a smooth internal surface, stunning appearance and perfect fitment. This is supplied as a replacement lid only - to retrofit to any existing R600 intake. SOPHISTICATED MATTE CARBON FIBRE VWR121001 STUNNING HIGH GLOSS​ CARBON FIBRE VWR121000 SIMPLE FIT Fitted in minutes to any existing R600 intake of any age. Simply unscrew the old lid and replace it with the new carbon version. BEAUTIFUL  The exquisite detail of the carbon weave and the flawless surface finish will transform your engine bay appearance. In fact, it's almost a shame to hide it away! STRONG & LIGHT Each R600 lid is carefully hand-laid using autoclaved pre-preg carbon fibre for a strong & light construction with perfect dimensional accuracy. CONFIRMED APPLICATIONS ANY R600 INTAKE FOR 2.0 TSI & 1.8 TSI MQB / EA888.3 / 3B ​ GLOSS LID: VWR121000      MATTE LID: VWR121001 ​ NOTES: This is a lid only, for retro-fitting to any R600 Intake (VWR12G7R600/1/2) of any age. NOTE: this lid does not fit the new MQB 'EVO' intake. The Carbon Lid for this intake is coming soon.

Read more less

VAAGSport Turbo Muffler Delete for 1.8T/2.0T MQB EA888 Gen.3 Engines Volkswagen Mk7 Golf R/GTI, Arteon 4Drive, Audi S3 8V, TTS 8J, SQ2, SEAT Cupra 280/290/300, Skoda Octavia Mk3 VRS (TSI), Cupra Ateca 4Drive Removes the turbulent OEM muffler on the turbocharger. The original muffler essentially acts as a suppressor reducing the turbo sound that tuners and drivers love. The VAAGsport kit has duel seals set into machined grooves so they not only ensure a perfect seal and no boost loss but makes the kit super easy to install. What’s Included Turbo Muffler Delete Comparing stock to VAAGSport

Read more less

VAAGSport High Flow Turbo Elbow for MQB EA888 Gen.3 Engines Volkswagen Mk7 Golf R/GTI, Audi S3 8V, TTS 8J, SEAT Cupra 280/290/300, Skoda Octavia Mk3 VRS (TSI) Elegant design and practical gains. Removing the restriction to the stock IS38/IS20 turbo air flow is paramount, an increased dose of cold air to the turbo gives a extremely worthwhile power gains. Compatible with all 1.8T & 2.0T EA888.3 vehicles, the VAAGSport Turbo Elbow should be one of your first considerations for improving the vehicles air intake system. A great idea on a stock engine, essential on a tuned vehicle. Works even better when combined with the VAAGSport 3” high capacity intake hose and high flow air filter. Suitable for up to Stage 3 tuning (with supporting mods) What’s Included High Flow Turbo Elbow Inlet Note If you are planning to use this item on an Ibiza 1.8TFSI, Polo 1.8TFSI or Audi S1 2.0TFSI – You will need to purchase an additional PCV Breather Pipe.The part number for this is 06K 103 213A and it can be ordered from here. Comparing stock to VAAGSport

Read more less

Ramair Jetstream Induction & Turbo Intake Kit (JSK + TI) for vehicles utilizing the MQB chassis platform equipped with the 2.0 TSI (EA888) engine. This kit allows for increased airflow and induction noise over the factory air intake equipment. This kit mounts to standard factory mounting points and rubbers. The kit comprises of… Oversize Turbo Intake Elbow This part allows for increased potential airflow and slightly increased induction sound. The inlet elbow is made from light weight aluminium tube with CNC machined connections and a laser cut bracket, is fully TIG welded and powder-coated in a textured black finish for an OEM look. Jetstream Performance Baseplate Filter Our performance foam air filter, with stainless steel cage construction for superior internal structural support and a spun aluminium neck designed to act as a velocity stack, minimizing turbulence in the intake tract, maximizing flow. The filter element has quick release fittings to enable quick removal, allowing for easy cleaning & maintenance. Silicone Intake Pipe Single piece turbo intake pipe made with 5-ply polyester reinforced silicone, maintaining a constant 80mm diameter and providing excellent protection from high engine bay temperatures. Heat Shield with OEM mounting points Laser cut, precision folded heat shield powder-coated in black, is designed to fit directly to the standard OEM factory air box mounting points and rubbers without the need for modification. The heat shield helps maintain low intake temperatures by providing a physical barrier between the air filter and the rest of the engine bay and directing the air from the factory cold air feed to the area around the filter. Full Fitting Kit Includes all nuts bolts, hose clamps and high quality silicone hose connectors necessary to fit the kit to a standard car (This kit requires utilization of some components from the standard intake pipe and air box). Full Fitting Instructions with Photos Fully detailed step-by-step instructions to guide you through the installation process. This product is suitable for the following vehicles.... Make Model Engine Years Audi A3 (8V) 2.0 TFSI 2013 - 2020 Audi A3 (8V) 1.8 TFSI 2013 - 2020 Audi S3 (8V) 2.0 TFSI 2013 - 2020 Seat Leon (5F) 2.0 TSI Cupra 2013 - 2020 Seat Leon (5F) 2.0 TSI 2013 - 2020 Seat Leon (5F) 1.8 TSI 2013 - 2020 Skoda Octavia (5E) 2.0 TSI 2013 - 2020 Skoda Octavia (5E) 1.8 TSI 2013 - 2020 Volkswagen Golf (mk7) 2.0 TSI R 2013 - 2020 Volkswagen Golf (mk7) 2.0 TSI GTI 2013 - 2020 Volkswagen Golf (mk7) 2.0 TSI 2013 - 2020 Volkswagen Passat (B8) 2.0 TSI 2015 - 2020 Volkswagen Passat (B8) 1.8 TSI 2015 - 2020 Please use the vehicle look up tool at the top of the page to confirm fitment.

Read more less

Ramair Jetstream Induction Kit (JSK) for vehicles utilizing the MQB chassis platform equipped with the 2.0 TSI (EA888) engine. This kit allows for increased airflow and induction noise over the factory air intake equipment. This kit mounts to standard factory mounting points and rubbers. The kit comprises of… Jetstream Performance Baseplate Filter Our performance foam air filter, with stainless steel cage construction for superior internal structural support and a spun aluminium neck designed to act as a velocity stack, minimizing turbulence in the intake tract, maximizing flow. The filter element has quick release fittings to enable quick removal, allowing for easy cleaning & maintenance. Silicone Intake Pipe Single piece turbo intake pipe made with 5-ply polyester reinforced silicone, maintaining a constant 80mm diameter and providing excellent protection from high engine bay temperatures. Heat Shield with OEM mounting points Laser cut, precision folded heat shield powder-coated in black, is designed to fit directly to the standard OEM factory air box mounting points and rubbers without the need for modification. The heat shield helps maintain low intake temperatures by providing a physical barrier between the air filter and the rest of the engine bay and directing the air from the factory cold air feed to the area around the filter. Full Fitting Kit Includes all nuts bolts, hose clamps and high quality silicone hose connectors necessary to fit the kit to a standard car (This kit requires utilization of some components from the standard intake pipe and air box). Full Fitting Instructions with Photos Fully detailed step-by-step instructions to guide you through the installation process. This product is suitable for the following vehicles.... Make Model Engine Years Audi A3 (8V) 2.0 TFSI 2013 - 2020 Audi A3 (8V) 1.8 TFSI 2013 - 2020 Audi S3 (8V) 2.0 TFSI 2013 - 2020 Seat Leon (5F) 2.0 TSI Cupra 2013 - 2020 Seat Leon (5F) 2.0 TSI 2013 - 2020 Seat Leon (5F) 1.8 TSI 2013 - 2020 Skoda Octavia (5E) 2.0 TSI 2013 - 2020 Skoda Octavia (5E) 1.8 TSI 2013 - 2020 Volkswagen Golf (mk7) 2.0 TSI R 2013 - 2020 Volkswagen Golf (mk7) 2.0 TSI GTI 2013 - 2020 Volkswagen Golf (mk7) 2.0 TSI 2013 - 2020 Volkswagen Passat (B8) 2.0 TSI 2015 - 2020 Volkswagen Passat (B8) 1.8 TSI 2015 - 2020 Please use the vehicle look up tool at the top of the page to confirm fitment.

Read more less

Racingline R600 Cotton Filter Oversock RacingLine’s new Cotton Filter ‘Oversock’ combines the best of both filter choices. The single layer foam material protects debris and dust from settling on Cotton Filter surface, and reduces the deterioration that all pleated cotton filters always suffer from.Simply slide the foam oversock over the top of the foam filter and protect the surface layer of the cotton from dust and dirt. When it needs it, the oversock can be cleaned or just replaced cheaply to keep the cotton filter at its very best for years. Simply slides over the top of the Cotton R600 filter  Cotton Filters always deteriorate in efficiency as dirt settles and slowly restricts airflow – this Oversock keeps the surface clean Simply remove the Oversock and clean it, or replace at each service, keeping your Cotton Filter airflow like new Note, not for use with the Tri-foam filter. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR12G7R600OS

Read more less

2.0 TSI & 2.0 TDIHigh-FlowPanel Air Filter. Set your MQB & MQB 'Evo' 2.0 TSI, 1.8 TSI or 2.0 TDI engine free by allowing it to breathe better and operate more efficiently.VWR11G701 What doesit do? Looking for a simple, warranty-friendly upgrade for your car? ​ Our High-Flow Panel Air Filters, available for all Volkswagen Group 'MQB' 2.0 TSI, 1.8 TSI & 2.0 TDI cars, replace the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam® filter. Put simply, it’s the best Panel Air Filter you can buy. OEM-standards of design, quality, materials and construction, hand-made in the UK. Fits like a factory part; lasts like a factory part Allow your engine to breathe better and operate more efficiently – improve the engine’s airflow, and power and fuel economy gains will follow.  By removing the inevitable restrictions that the standard paper panel filter gives, our Panel Filter allows a small but worthwhile increase in airflow through to the turbo.    TRIFOAM® FILTER Our unique Trifoam® filter construction allows us to sandwich three different foams together for the perfect filtration and minimum restriction. HAND-MADE IN UK Each filter construction is hand-made in the UK for the reassurance of the highest quality together with exceptional dust-loading properties. EFFICIENCY GAINS The result?  More mid-range power and improved economy, without wrecking your warranty PETROL/GAS ENGINES All MQB/MQBE 1.8 & 2.0 TSI DIESEL ENGINES All MQB/MQBE 2.0 TDI   Confirmed applications. VWR11G701All MQB / MQB 'Evo' VW / AUDI / SEAT / CUPRA / SKODA2.0 TSI EA888.3 & EA888.41.8 TSI EA888.32.0 TDI EA288 & EA189 > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Golf 7 & 7.5 2.0 TDI / GTD 2013-2020 > VW Passat 2.0 TDI B8 2015+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TDI 2017+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW T-Roc 2.0 TDI 2017+ > VW Tiguan II 2.0 TDI 2016+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi A3 8V 2.0 TDI 2013-2020 > Audi TT 2.0 TDI 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 2018+ > Audi Q2 2.0 TDI 2017+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > SEAT Leon III 2.0 TDI 5F 2013-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Ateca 2.0 TDI 2016+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Octavia III vRS 2.0 TDI 5E 2014-2020 > Skoda Octavia III 5E 2.0 TDI 2014-2020 > Skoda Superb III 2.0 TDI 3V 2015+ > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

Description This performance intake kit is designed to fit the VW 1.0 TSI platform. For full compatibility please check list below. Features Easy to maintain with our filter maintenance kit – CK-003 Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Proram pleated filter Black powder coated aluminium intake pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2015 Audi A1 (8X) 1.0 TFSI 2016 Audi A1 (8X) 1.0 TFSI 2017 Audi A1 (8X) 1.0 TFSI 2018 Audi A1 (8X) 1.0 TFSI 2016 Audi A3 (8V) 1.0 TFSI 2017 Audi A3 (8V) 1.0 TFSI 2018 Audi A3 (8V) 1.0 TFSI 2019 Audi A3 (8V) 1.0 TFSI 2020 Audi A3 (8V) 1.0 TFSI 2017 Seat Arona (KJ) 1.0 TSI 2018 Seat Arona (KJ) 1.0 TSI 2019 Seat Arona (KJ) 1.0 TSI 2020 Seat Arona (KJ) 1.0 TSI 2021 Seat Arona (KJ) 1.0 TSI 2022 Seat Arona (KJ) 1.0 TSI 2023 Seat Arona (KJ) 1.0 TSI 2024 Seat Arona (KJ) 1.0 TSI 2025 Seat Arona (KJ) 1.0 TSI 2016 Seat Ateca (KH) 1.0 TSI 2017 Seat Ateca (KH) 1.0 TSI 2018 Seat Ateca (KH) 1.0 TSI 2019 Seat Ateca (KH) 1.0 TSI 2020 Seat Ateca (KH) 1.0 TSI 2021 Seat Ateca (KH) 1.0 TSI 2022 Seat Ateca (KH) 1.0 TSI 2023 Seat Ateca (KH) 1.0 TSI 2024 Seat Ateca (KH) 1.0 TSI 2025 Seat Ateca (KH) 1.0 TSI 2015 VW Caddy (MK4) 1.0 TSI 2016 VW Caddy (MK4) 1.0 TSI 2017 VW Caddy (MK4) 1.0 TSI 2018 VW Caddy (MK4) 1.0 TSI 2019 VW Caddy (MK4) 1.0 TSI 2020 VW Caddy (MK4) 1.0 TSI 2014 Skoda Fabia (MK3) 1.0 TSI 2015 Skoda Fabia (MK3) 1.0 TSI 2016 Skoda Fabia (MK3) 1.0 TSI 2017 Skoda Fabia (MK3) 1.0 TSI 2018 Skoda Fabia (MK3) 1.0 TSI 2019 Skoda Fabia (MK3) 1.0 TSI 2020 Skoda Fabia (MK3) 1.0 TSI 2021 Skoda Fabia (MK3) 1.0 TSI 2022 Skoda Fabia (MK3) 1.0 TSI 2015 VW Golf (MK7) 1.0 TSI 2016 VW Golf (MK7) 1.0 TSI 2017 VW Golf (MK7) 1.0 TSI 2018 VW Golf (MK7) 1.0 TSI 2019 VW Golf (MK7) 1.0 TSI 2020 VW Golf (MK7) 1.0 TSI 2015 Seat Ibiza (MK4) 1.0 TSI 2016 Seat Ibiza (MK4) 1.0 TSI 2017 Seat Ibiza (MK5) 1.0 TSI 2018 Seat Ibiza (MK5) 1.0 TSI 2019 Seat Ibiza (MK5) 1.0 TSI 2020 Seat Ibiza (MK5) 1.0 TSI 2021 Seat Ibiza (MK5) 1.0 TSI 2022 Seat Ibiza (MK5) 1.0 TSI 2023 Seat Ibiza (MK5) 1.0 TSI 2024 Seat Ibiza (MK5) 1.0 TSI 2025 Seat Ibiza (MK5) 1.0 TSI 2019 Skoda Kamiq (NW) 1.0 TSI 2020 Skoda Kamiq (NW) 1.0 TSI 2021 Skoda Kamiq (NW) 1.0 TSI 2022 Skoda Kamiq (NW) 1.0 TSI 2023 Skoda Kamiq (NW) 1.0 TSI 2024 Skoda Kamiq (NW) 1.0 TSI 2025 Skoda Kamiq (NW) 1.0 TSI 2017 Skoda Karoq (NU7/ND7) 1.0 TSI 2018 Skoda Karoq (NU7/ND7) 1.0 TSI 2019 Skoda Karoq (NU7/ND7) 1.0 TSI 2020 Skoda Karoq (NU7/ND7) 1.0 TSI 2021 Skoda Karoq (NU7/ND7) 1.0 TSI 2022 Skoda Karoq (NU7/ND7) 1.0 TSI 2023 Skoda Karoq (NU7/ND7) 1.0 TSI 2024 Skoda Karoq (NU7/ND7) 1.0 TSI 2025 Skoda Karoq (NU7/ND7) 1.0 TSI 2015 Seat Leon (MK3) 1.0 TSI 2016 Seat Leon (MK3) 1.0 TSI 2017 Seat Leon (MK3) 1.0 TSI 2018 Seat Leon (MK3) 1.0 TSI 2019 Seat Leon (MK3) 1.0 TSI 2020 Seat Leon (MK3) 1.0 TSI 2016 Skoda Octavia (MK3) 1.0 TSI 2017 Skoda Octavia (MK3) 1.0 TSI 2018 Skoda Octavia (MK3) 1.0 TSI 2019 Skoda Octavia (MK3) 1.0 TSI 2020 Skoda Octavia (MK3) 1.0 TSI 2017 VW Polo (AW) 1.0 TSI 2018 VW Polo (AW) 1.0 TSI 2019 VW Polo (AW) 1.0 TSI 2020 VW Polo (AW) 1.0 TSI 2021 VW Polo (AW) 1.0 TSI 2022 VW Polo (AW) 1.0 TSI 2023 VW Polo (AW) 1.0 TSI 2024 VW Polo (AW) 1.0 TSI 2025 VW Polo (AW) 1.0 TSI 2017 Skoda Rapid (NH) 1.0 TSI 2018 Skoda Rapid (NH) 1.0 TSI 2019 Skoda Rapid (NH) 1.0 TSI 2016 Audi Q2 (GA) 1.0 TFSI 2017 Audi Q2 (GA) 1.0 TFSI 2018 Audi Q2 (GA) 1.0 TFSI 2019 Audi Q2 (GA) 1.0 TFSI 2020 Audi Q2 (GA) 1.0 TFSI 2019 Skoda Scala (NW) 1.0 TSI 2020 Skoda Scala (NW) 1.0 TSI 2021 Skoda Scala (NW) 1.0 TSI 2022 Skoda Scala (NW) 1.0 TSI 2023 Skoda Scala (NW) 1.0 TSI 2024 Skoda Scala (NW) 1.0 TSI 2025 Skoda Scala (NW) 1.0 TSI 2018 VW T-Cross (MK1) 1.0 TSI 2019 VW T-Cross (MK1) 1.0 TSI 2020 VW T-Cross (MK1) 1.0 TSI 2021 VW T-Cross (MK1) 1.0 TSI 2022 VW T-Cross (MK1) 1.0 TSI 2023 VW T-Cross (MK1) 1.0 TSI 2024 VW T-Cross (MK1) 1.0 TSI 2025 VW T-Cross (MK1) 1.0 TSI 2019 VW T-Roc (MK1) 1.0 TSI 2020 VW T-Roc (MK1) 1.0 TSI 2021 VW T-Roc (MK1) 1.0 TSI 2022 VW T-Roc (MK1) 1.0 TSI 2023 VW T-Roc (MK1) 1.0 TSI 2024 VW T-Roc (MK1) 1.0 TSI 2025 VW T-Roc (MK1) 1.0 TSI 2017 Seat Toldeo (MK4) 1.0 TSI 2018 Seat Toldeo (MK4) 1.0 TSI 2019 Seat Toldeo (MK4) 1.0 TSI

Read more less

Forge Motorsport has developed this turbo outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine). It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part. This is a direct replacement for Part Number 06H 131 111.

Read more less

This reinforced silicone intake hose fits the 2 litre turbo Mk7 Golf, Seat Leon Cupra 280R and Audi S3 2.0l TSI (8V Chassis). Due to its location it really improves the looks of the engine compartment and removes any restriction of the OEM plastic hard pipe.  These are available in red, blue or black. Please select your choice in the options above when ordering. This part is also compatible with our turbo inlet adapter, FMTIA1 The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* The hose has an inner diameter of 70mm and 80mm  *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less