Performance - Skoda Superb MK3 (2015-2023)

Product Description The Forge Motorsport dump valve for the 2015-on 1.2 TSI engine codes CJZA, CJZC, CJZD, CYVB as found in the Skoda Fabia, Skoda Octavia, VW Golf, VW Polo, Audi A1, Audi A3, Seat Ibiza and Seat Leon. Please note this kit is only compatible with models that do not have a standard turbo mounted diverter valve. Earlier models that have a turbo mounted diverter valve as standard require the kit with part number FMDVA1TSI and FMDVATSI The 1.2 and 1.4 TSI doesn’t have a dump valve from the factory, so this product allows you to have the traditional dump valve noise between gear changes and when letting off the gas pedal. It won’t bring on any check engine lights and the car will drive just as before. This kit totally replaces the plastic pipe from turbo to manifold with a silicon hose (available in a choice of colours), and everything else you need to install the valve is included in the kit together with full instructions. Unlike other valves on the market the Forge valve will not bring on any check engine lights. ( EML )  The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Flurosilicone. This means the hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically. The use of a Flurosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty. This Forge valve set up is designed to fit with the standard intake. We cannot guarantee it will fit with all aftermarket intakes. This product design has been registered.  Registration Number:  5004511 Compatible Vehicles Audi A1 1.2 Tsi 2015 Onwards   A1 1.4TSI 2015 Onwards   A3 1.2 Tsi 2015 Onwards   A3 8V 1.4 TSI 2015 Onwards Volkswagen Golf MK7 1.4TSI   Golf Mk7 1.2TSI   Golf Mk7 1.4 150bhp   Jetta 1.4tsi 2015 Onwards   Polo 1.2 Tsi 2015 Onwards Skoda Fabia 1.2 Tsi 2015 Onwards   Octavia 1.2 Tsi 2015 Onwards Seat Ibiza 1.2 Tsi 2015 Onwards   Leon 1.2 Tsi 2015 Onwards   Leon 1.4TSI 2015 Onwards Warranty Warranty Infomation All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied. For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.

Read more less

The Forge Motorsport FMDV22 Blow off valve kit now fits all engine variants, please identify from the images below whether you require the extra breather adapter for you application. If your engine bay is the same as shown above then you will require the aditional breather adapter so please make sure to select 'Yes' on the Breather adapter dropdown option. FITS: AudiA1A1 (GB) 2018-35 TFSI (1.5 TSI)A335 TFSI (1.5 TSI)Q235 TFSI (1.5 TSI)Q335 TFSI (1.5 TSI)CupraFormentor1.5 TSISeatArona1.5 TSIAteca1.5 TSIIbizaMk5 (KJ) 2017 - late 20211.5 TSILeonMk3 2012-20201.5 TSI 130/150 BHP 2018-Mk4 2022-1.5 TSITarraco1.5 TSISkodaKaroq1.5 TSIKodiaq1.5 TSIOctavia1.5 TSIScala1.5 TSISuperb1.5 TSIVolkswagenArteon(2017-2020)1.5 TSI(2020-)1.5 TSIGolfMK71.5 TSIMK7.51.5 TSIMK81.5 eTSI1.5 TSIPassat1.5 TSIT-CrossT-Cross 1.5 TSIT-Roc1.5TSITiguan1.5 TSITouran1.5 TSI If your engine bay is the same as shown above you do not require the additional breather adapter, please make sure to select 'No' on the dropdown option. As the engine does not have a diverter valve fitted as standard, Forge have developed a twin piston dump valve that not only gives you an incredibly loud sound when lifting off the throttle, but also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure. Especially on engines and modified vehicles. This valve kit allows the fitment of our fast response blow off valve preventing turbo surge and prolonging the life of your engine’s turbocharger.   The kit includes all of the necessary hardware and step by step installation instructions for any car enthusiast with appropriate garage tools to fit at home, in just a couple of hours!     Due to the exposed position of the OEM boost pipe and the nature of heat cycle, the plastic that the OEM pipe is made from can deteriorate over time, becoming brittle and susceptible to boost leaks. This kit totally replaces this plastic pipe from turbo to manifold with a silicone hose (available in a choice of colours!).     Highlights: CNC machined billet couplers and components CNC machined twin piston Forge valve Three hose options: red, blue, or black (Custom available but will incur a 50% non-refundable deposit and a lead time of 8-10 weeks) Forge valve will not bring on any check engine lights (EML)  The hose has a quality inner lining of modified silicone known as 'Fluorosilicone'. This means that the hose will stay bright and vibrant, and will not deteriorate over time. Forge Motorsport lined hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The construction of the hose has been engineered to exceed that of the OEM fitments, the Forge Motorsport hose will enhance any engine bay both technically and aesthetically. The hose from this kit replaces OEM part numbers 05E.145.673.E and 05E.145.674.E We cannot guarantee that this product will fit with all aftermarket intakes. Lifetime warranty. In the Box:1 x Atmospheric Dump Valve1 x Boost Tap/Take Off (Including Cork Gasket and Screws) Throttle Body and Turbo Couplers1 x Silicone Hose (Red, Blue or Black)3 x Hose ClampsAll fixings and fittings1 x Roll of Vacuum Tubing1 x Wiring Loom Extension1 x Forge Sticker     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI engine (US codes CPKA and CPRA) and 2.0 TSI engine (Euro code CNTA, CHHA, CHHB, CJXB and CJXC;US codes CPLA and CPPA) including Golf MK7 R This valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. It has also been proven in cars running over 600bhp! This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.   In The Box:1 x FMDVMK7R Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x Uprated Blue Spring10 x Cable Ties1 x 1000mm of 4mm Vacuum Tube1 x 5mm T Piece1 x Instructions1 x Forge Keyring and Sticker   FITS MULTIPLE VEHICLES

Read more less

Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI engine (US codes CPKA and CPRA) and 2.0 TSI engine (Euro code CNTA, CHHA, CHHB, CJXB and CJXC;US codes CPLA and CPPA)  including Golf MK7 R. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition! Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. It has also been proven in cars running over 600bhp! This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.   In The Box:1 x FMDVMK7A Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x Uprated Blue Spring10 x Cable Ties1 x 1000mm of 4mm Vacuum Tube1 x 5mm T Piece1 x Instructions1 x Forge Keyring and Sticker

Read more less

This product only works in conjunction with FMINDK35. After the success of the FMDV22 Forge Motorsport has now developed a recirculating Valve option for the VAG 1.5 TSI engine. It uses our tried and tested FMDV008 recirculation valve, this valve has been with us for some time and has proved time and again to be tough, durable and ultra-reliable. By adding this valve, it prevents turbo surge and prolongs the life of your engine’s turbocharger. As the engine does not have a diverter valve fitted as standard, Forge have reused our tried and tested FMDV008 valve that increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure, especially on engines and modified vehicles. Like with all our valves you are able to customise it to fit your application with two uprated springs provided in the kit. Due to its clever design, changing the spring is a very simple process, simply undo the fasteners attaching the valve top and remove the spring. Its that easy! Due to the exposed position of the OEM boost pipe and the nature of an engines heat cycle, the plastic the OEM pipe is made from can deteriorate over time becoming brittle and susceptible to boost leaks. This kit totally replaces this plastic pipe from turbo to manifold with a silicone hose (available in a choice of colours), and everything else you need to install the valve is included in the kit together with full instructions. •    Anodised CNC machined billet couplers and components along with a tuneable CNC machined twin piston Forge Motorsport valve•    Custom colours are available but will incur a 50% none refundable deposit and a lead time of 8-10 weeks•    Unlike other valves on the market the Forge valve will not bring on any check engine lights (EML) •    The Forge silicone hose in this kit has been designed to include a quality inner liner of modified silicone known as Fluorosilicone. This ensures the colour of the silicon hose stays bright and vibrant and unlike our competitors will not deteriorate over time•    This means Forge Motorsport hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist•    The construction of the hose has been engineered to exceed that of the OEM fitments•    The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader•    Lifetime warranty In the Box:1x Recirculating Dump Valve1x Boost Tap/take Off (Including Cork Gasket and Screws)1x Throttle Body and Turbo Couplers2x Silicone Hose (Red, Blue or Black)6x Hose Clamps1x Roll of Vacuum Tubing1x Norma Adaptor Fitting1x Blanking Plug   

Read more less

*Please be aware that if your vehicle has the below MAF sensor on the inlet then this intake will not fit your vehicle, we currently do not offer an alternative for MAF vehicles* Forge are proud to present the latest high performance intake for the popular 1.5 TSI Evo engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range. This kit features a Forge Ram Air high flow, pleated, synthetic nanofiber filtration filter, that has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.5 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The benefit of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the TSI EVO engine. Left hand drive intake Right hand drive intake As with all our intakes we design, high air flow is considered absolutely paramount, thus, we endeavoured to incorporate a large bore silicone high flow pipe with turbo inlet adaptor included. This helps to aid the engines performance and air flow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air than the stock inlet tract to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes as more air is being kept within the intake system. The Forge developed inlet tract has more than a 50% increase in volume with the area at the mouth of the turbo increased to 46%. This, combined with no internal baffles or noise restrictors gives a helping hand to the vehicles acoustic notes and throttle response. With the use of Solidworks®, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. All of the billet components supplied have been made from 6082 Alloy and then anodised to ensure the alloy has no fatigue and stays without corrosion for years to come. This kit completed with stainless steel high quality hose clamps has the usual unrivaled performance you would expect from Forge Motorsport. Each Forge Motorsport intake hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. Please select your colour choice when ordering. During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust the figure can be far greater as the OEM intake system is restricted on high performance engines. The FMINDK30 combined with either our atmospheric dump valve kit FMDV22 or our recirculating valve kit FMDV30 certainly transforms the whole driving experience and engine note of your 1.5 TSI EVO engine. As ever, this product comes with the Forge Motorsport lifetime warranty on all the hardware supplied, giving you the enthusiasts, the best product for your pride and joy.     The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*

Read more less