Performance - Toyota Supra MK5 (A90 / J29) 2019-Present

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

This oil catch tank kit is for the Toyota Supra A90 and BMW Z4 with the BMW B58 Engine, developed by our in-house development team. Not only is it beautifully designed, it has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapours and moisture, all of which would ordinarily make their way back through to the inlet of the engine. FITS: BMWZ4ToyotaSupraMk5 A90 When the B58 engine is tuned heavily blow by can occur resulting in poor breathing our specifically designed catch can system and extensive testing has proven our oil catch tank kit's ability to effectively reduce sludge and carbon build up, in turn allowing the engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend, particularly if you are planning more advanced power tuning at a later date. With aesthetics also in mind our catch can has the bracket incorporated into the catch can lid and is placed behind the factory airbox heat shield meaning this important component can still be kept in situ. The 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection. The design of the breather adaptor and catch can was formed using the latest 3D solidworks software and engineered for a complete plug and play solution with no cutting or modifying of original components meaning the vehicle can return to stock in just under a hour. The design of the kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F) Finally, this kit includes machined billet fittings that are anodised black to form an OEM-looking product when installed.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description This is a replacement carbon canister including Pipercross filter that fits the FMINDGOLR twintake and Fiat FMINDF500 These have been created exclusively for Forge by filtration gurus Pipercross, and feature the latest multilayer-foam technology that is proving to be so successful in this season’s British Touring Car Championship  (BTCC). These are priced individually. Please order 2 when replacing carbon canister/filters on the FMINDGOLR system. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.  

Read more less

Product Description With modern day aftermarket ECU tuning pushing powerful engines harder. In certain conditions the vehicle will run the risk of receiving inadequately cooled air affecting the engines efficiency and ultimately losing power. With this in mind, Forge are proud to release another PolarCooler as the first auxiliary cooling system for the BMW B58 engine Found in the A90 Supra. Following extensive testing on the road and dyno working with 3 different styles of water core with different fin pitch configurations, we are proud to present the ultimate in frontal water cooling solutions. If you are a keen modifier and wish to push the limits of your A90 this chargecooler is a must, With 177% increase in volume hot climate owners will definitely appreciate the development that has gone into this product resulting in safer IATs (inlet air temps) for a longer period of time meaning when on track it takes longer for the standard ecu to reduce ignition timing which will create power loss. With the Forge PolarCooler it results in more power for longer with peace of mind for track day sessions.  The PolarCooler is available in either a powder coated satin Black finish or motorsport raw Alloy.      The uniquely developed Forge PolarCooler features: An increase of over 170% extra capacity using a 18 fpi (fins per inch) louvre super tech cooling core for maximum cooling. The PolarCooler replaces the OEM chargecooler radiator. This chargecooler has been designed featuring triple pass water flow to ensure all of the surface area of the core is utilised, meaning maximum cooling efficiency. This unique design has allowed inlet temperatures to be lowered by 20°C (68°F) in 3 back to back runs on the dyno. The Forge PolarCooler locates in the OEM position and is supplied with anti-corrosion black powder coat on the hand fabricated end tanks and core or motorsport raw alloy A reduction of the temperature of the cooling water is directly equated with an improved cooling performance of the charged air. With an increase in volume of water introduced to the cooling system the thermal temperatures can be kept at a much reduced level over a longer period, ensuring greater performance and efficiency which in turn is perfect for your fast road and track enthusiast. The Forge radiator has a volume of 23 litres compared to the OEM of just 8.3 litres. Dimensions:OEM:500mm x 615mm x 27mm  (8.3l)Forge Polarcooler:480mm x 600mm x 80mm  (23l) This product is designed, developed and manufactured entirely in Great Britain and is covered by our worldwide lifetime warranty. We estimate that it will take around 4-5 hours to complete installation of this product.

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under full right and left wheel lock. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are 11mm thick with a 66.5mm bore and dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcentric" spacers) The spacers are suitable for most vehicles produced by Volkswagen Group. A 11mm spacer will give an overall track increase of 22mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   In The Box:2 x FMWS10 11mm Wheel Spacer1 x Forge Sticker

Read more less

A set of 4 ultra-high performance brake lines for the Toyota Supra MK5 A90. These are a direct replacement/upgrade for the OEM brake line set and require no further modifications to fit. Hosetechnik lines are hand-finished with Teflon-lined braided stainless steel bodies and custom-machined stainless fittings, resulting in a brake hose that will perform under the most extreme and harsh conditions, whilst still looking good and performing at the highest level. They are available in no less than 12 hard-wearing PVC sleeve colours, which look amazing, and protect against dirt and water ingress.   Our hoses eliminate all the problems associated with standard OE lines Immediate brake pedal response Lifetime Warranty Choice of colour Reduces pedal sponginess under hard braking Compatible with all brake fluids Will not corrode   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less