Performance - VOLVO C70 MK2 (2006-2013)

These Schwaben Ramps are  lightweight at only 4 lbs each and easy to carry and maneuver. They will not slip, slide or scoot on any surface and never scratches or marks your floor. These ramps are 100% solid core construction for additional strength. These are ideal for smaller sports cars with short noses. Please take measurement below before ordering. Great for quick oil changes and underbody maintenance. Fits tires up to 8" wide. One set holds up to 3000 lbs. Ramps have have handy carrying straps. Please see handy chart below to see if our 30" Schwaben ramps are right for your vehicle! How to measure your car for fitment. 1. Take a yard stick, wedge it under the front inside edge of the front tire. 2. Raise the yard stick up until it hits the underside of your car( the spoiler. 3. Measure from the tip of the yardstick to the ground, vertically. If your measurement is 10.5" or greater, you can clear the ramps without a problem. Cross Reference race ramps, car ramps This Part Fits the Following Vehicles Make Model Submodel Engine Audi All All All BMW All All All Mercedes Benz All All All MINI All All All Porsche All All All Volkswagen All All All *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Description: The Slime Smart Spair is "THE SMART WAY TO FIX FLATS FAST". No need to jack-up the car or remove the wheel - just install Slime tyre sealant, plug in the air compressor, turn it on, reinflate and go. Stow it under your car seat or in the boot - The Smart Spair offers a portable solution for flat tire repair. No need to remove the tyre. No need to wait for recovery assistance. Avoid dangerous roadside delays. Fix a flat fast - in 15 minutes or less! Emergency repair kit fixes a in 15 minutes No need to remove the tire 300psi 12v Tyre inflator with adapters included Includes a bottle of Slime tire sealant and a portable air compressor Seals punctures up to a quarter-inch Repairs punctures up to 6mm in tubeless tyres Comes with adapters to inflate mattresses, balls or other inflatables

Read more less

Product Description This is a replacement carbon canister including Pipercross filter that fits the FMINDGOLR twintake and Fiat FMINDF500 These have been created exclusively for Forge by filtration gurus Pipercross, and feature the latest multilayer-foam technology that is proving to be so successful in this season’s British Touring Car Championship  (BTCC). These are priced individually. Please order 2 when replacing carbon canister/filters on the FMINDGOLR system. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.  

Read more less

AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

Read more less

Racingline Filter Oil & Cleaning Kit The Racingline Oil and Cleaner Kit will help you keep your filter in peak condition at all times and ensure that the complex triple-layer foam continues to deliver its power and filtration benefits for many years. Instructions are provided for cleaning and maintenance. It’s a simple process, but please take time to read through, or ensure that your technician reads them, before you begin. We would suggest that you keep these notes with your car for future maintenance/owners. We recommend that the filter element is cleaned and reoiled every 10,000 miles/16,000 km, and/or a visual inspection at least every 12 months. This is a simple procedure, and will ensure that your filter continues to deliver the power improvements over a standard car. If your car is regularly used in a dry/dusty environment, we advise that you clean and re-oil your filter more regularly If you don’t clean your filter at the above intervals, no loss of filtration will occur, and your engine will still be fully protected. However, the performance advantages from the additional air flow of a clean filter will be lost. You will also shorten the life of the filter element. REPLACEMENT FILTER Like all the other filters on your car, it’s worth replacing the air filter element itself periodically. Rather than cleaning and re-oiling, lots of customers prefer to simply replace their filter element for what is a relatively low cost. We recommend replacement after 2 years for optimum performance. Of course, the filter will last for a longer period of time with correct maintenance and inspection for condition of foam as laid out below. BUY REPLACEMENT FILTER Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR120000

Read more less

Filters are recommended to be cleaned every 5000Km with either compressed air or with this cleaning kit. Special Notes:WE CANNOT SHIP THIS ITEM OUTSIDE OF THE UK DUE TO LIMITATIONS ON SHIPPING LIQUID CHEMICALS AND AEROSOLS

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, mid SAPS, premium OEM approved engine oil formulated using Millers Oils Dynamic Fluid Technology (DFT) for use in petrol, diesel and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for applications requiring a C3 5w30 viscosity. Designed for Volkswagen Audi Group (VAG) including Bentley, Lamborghini, Seat, Skoda and Porsche. Other coverage includes BMW and Mercedes Benz. USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Complements and utilises latest mid SAPS technology protecting after treatment systems such as particulate filters, Selective Catalytic Reduction (SCR) and AdBlue delivering ultimate soot control and environmental protection Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Specifically formulated for use in all hybrid systems including self-charging hybrid electric vehicles (HEV) and plug in hybrid electric vehicles (PHEV) Compatible for use with bio fuels, DFT provides exceptional performance and protection against deposits, sludge and engine wear PERFORMANCE PROFILE: ACEA C3 API SN BMW Longlife-04 MB 229.51 Porsche C30 VW 504 00 / 507 00 (Approved) SUITABLE FOR: Chrysler MS-11106 Fiat 9.55535-S3 MB 229.31 VW 506 00 / 506 01, VW 503 00 / 503 01 VW 502 00 / 505 01, VW 502 00 / 505 00 VW 500 00 / 501 01 Audi, Bentley, Lamborghini, Seat, Skoda Asian manufacturers* * Asian manufacturers - including but not limited to Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, full SAPS, premium manufacturer acknowledged engine oil formulated using the latest technology for use in petrol, diesel and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for OEM applications requiring a 5w30 viscosity, predominantly for Ford, Jaguar Land Rover and Asian manufacturers. USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Specifically engineered to enhance engine cleanliness, delivering improved fuel economy, reduced emissions and extended service drain capability Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Specifically formulated for use in all hybrid systems including self-charging hybrid electric vehicles (HEV) and plug in hybrid electric vehicles (PHEV) Compatible for use with bio fuels, DFT provides exceptional performance and protection against deposits, sludge and engine wear PERFORMANCE PROFILE: ACEA A5/B5 API SL Ford WSS-M2C913-D (Acknowledged) Jaguar Land Rover STJLR.03.5003 (Acknowledged) SUITABLE FOR: API CF ACEA A1/B1 Fiat 9.55535-G1 Ford WSS-M2C913-C, Ford WSS-M2C913-B, Ford WSS-M2C913-A ILSAC GF-4 Renault RN0700 Volvo VCC 95200377* Dacia Asian Manufacturers** * VCC 95200377 suitable for use where a 0w30 viscosity is recommended (except fuel economy benefit) ** Asian manufacturers - Including but not limited to Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   Fully synthetic, mid SAPS, premium OEM approved engine oil formulated using the latest technology. For use in petrol, diesel and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for applications requiring a C5 0w20 viscosity, designed for Volkswagen Audi Group (VAG) including Bentley, Seat, Skoda and Porsche. USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Specifically engineered to enhance engine cleanliness, delivering improved fuel economy, reduced emissions and extended service drain capability Complements and utilises latest mid SAPS technology, protecting after treatment systems such as particulate filters, Selective Catalytic Reduction (SCR) and AdBlue delivering ultimate soot control and environmental protection Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Specifically formulated for use in all hybrid systems including self-charging hybrid electric vehicles (HEV) and plug in hybrid electric vehicles (PHEV) PERFORMANCE PROFILE: ACEA C5 Porsche C20 VW 508 00 / 509 00 (Approved) SUITABLE FOR: Audi Bentley Seat Skoda

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, low SAPS, premium engine oil formulated using the latest technology for use in petrol, diesel and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for OEM applications requiring a C4 5w30 viscosity, predominantly for Renault diesel powered vehicles including Mercedes Benz and Nissan. USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Complements and utilises latest low SAPS technology protecting after treatment systems such as particulate filters, Selective Catalytic Reduction (SCR) and AdBlue delivering ultimate soot control and environmental protection Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Specifically formulated for use in all hybrid systems including self-charging hybrid electric vehicles (HEV) and plug in hybrid electric vehicles (PHEV) Compatible for use with bio fuels, DFT provides exceptional performance and protection against deposits, sludge and engine wear PERFORMANCE PROFILE: ACEA C4 Renault RN0720 SUITABLE FOR: Fiat 9.55535-S4 MB 229.51, MB 229.31, MB 226.51 Dacia Asian manufacturers* * Asian manufacturers - including but not limited to Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, mid SAPS, premium OEM approved engine oil formulated using the latest technology for use in petrol, diesel and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for applications requiring a C3 0w30 viscosity, designed for Volkswagen Audi Group (VAG) including Lamborghini, Seat, Skoda and Porsche. USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior component protection including pistons, rings, timing chain, bearings and valve lifters Complements and utilises latest mid SAPS technology protecting after treatment systems such as particulate filters, Selective Catalytic Reduction (SCR) and AdBlue delivering ultimate soot control and environmental protection Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Specifically formulated for use in all hybrid systems including self-charging hybrid electric vehicles (HEV) and plug in hybrid electric vehicles (PHEV) Compatible for use with bio fuels, DFT provides exceptional performance and protection against deposits, sludge and engine wear PERFORMANCE PROFILE: ACEA C3 Porsche C30 VW 504 00 / 507 00 (Approved) SUITABLE FOR: API SN VW 506 00 / 506 01, VW 503 00 / 503 01 VW 502 00 / 505 01, VW 502 00 / 505 00 VW 500 00 / 501 01 Audi, Lamborghini, Seat, Skoda

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, mid SAPS, premium OEM approved engine oil formulated using the latest technology for use in petrol, diesel and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for applications requiring a C3 5w40 viscosity. Targeting ‘Pumpe Düse’ PD Volkswagen Audi Group (VAG) engines including Lamborghini, Seat, Skoda and Porsche. Other coverage includes GM and Mercedes Benz. USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Specifically engineered to enhance engine cleanliness, delivering improved fuel economy, reduced emissions and extended service drain capability Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Specifically formulated for use in all hybrid systems including self-charging hybrid electric vehicles (HEV) and plug in hybrid electric vehicles (PHEV) Compatible for use with bio fuels, DFT provides exceptional performance and protection against deposits, sludge and engine wear PERFORMANCE PROFILE: ACEA C3 API SN BMW Longlife-04 GM dexos 2 MB 229.52, MB 229.51 Porsche C40 (Approved) Renault RN0700 / RN0710 VW 511 00 SUITABLE FOR: API CF Chrysler MS-11106 Fiat 9.55535-GH2, Fiat 9.55535-T2, Fiat 9.55535-S2 Ford WSS-M2C917-A GM-LL-B-025, GM-LL-A-025 MB 229.31, MB 226.5 Opel/Vauxhall OV0401547 Porsche A40 VW 502 00 / 505 01, VW 502 00 / 505 00 VW 500 00 / 501 01 Lamborghini Asian manufacturers* * Asian manufacturers - including but not limited to Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, mid SAPS, premium engine oil formulated using the latest technology for use in petrol, diesel and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for OEM applications requiring a C2 0w30 viscosity, predominantly for PSA group applications including Peugeot, Citroen and DS. USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Specifically engineered to enhance engine cleanliness, delivering improved fuel economy, reduced emissions and extended service drain capability Complements and utilises latest mid SAPS technology protecting after treatment systems such as particulate filters, Selective Catalytic Reduction (SCR) and AdBlue delivering ultimate soot control and environmental protection Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Delivers outstanding LSPI (Low Speed Pre-Ignition) protection and ultimate in turbo charger care, even under the most extreme operating conditions Specifically formulated for use in all hybrid systems including self-charging hybrid electric vehicles (HEV) and plug in hybrid electric vehicles (PHEV) PERFORMANCE PROFILE: ACEA C2 PSA B71-2312 SUITABLE FOR: API SN Chrysler MS-90047, Chrysler MS-13340 Fiat 9.55535-GS1, Fiat 9.55535-DS1 Peugeot, Citroen, DS Asian manufacturers* Millers Oils underwrites this product for BMW Longlife-12 FE applications * Asian manufacturers - including but not limited to Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, low SAPS, premium engine oil formulated using the latest technology for use in petrol, diesel and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for OEM applications requiring a C1 5w30 viscosity, predominantly for Land Rover / Range Rover vehicles fitted with Diesel Particulate Filters (DPF). USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Specifically engineered to enhance engine cleanliness, delivering improved fuel economy, reduced emissions and extended service drain capability Complements and utilises latest low SAPS technology protecting after treatment systems such as particulate filters, Selective Catalytic Reduction (SCR) and AdBlue delivering ultimate soot control and environmental protection Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Compatible for use with bio fuels, DFT provides exceptional performance and protection against deposits, sludge and engine wear PERFORMANCE PROFILE: ACEA C1 Ford WSS-M2C934-B Jaguar Land Rover STJLR.03.5005 (Acknowledged) SUITABLE FOR: JASO DL-1 Asian manufacturers* * Asian manufacturers - including but not limited to Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, full SAPS, premium OEM engine oil formulated using the latest technology for use in petrol, diesel and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for applications requiring a 0w40 viscosity, predominantly for use in Mercedes Benz, Mercedes Benz AMG powered vehicles, Porsche and Renault. USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Specifically formulated for use in all hybrid systems including self-charging hybrid electric vehicles (HEV) and plug in hybrid electric vehicles (PHEV) Compatible for use with bio fuels, DFT provides exceptional performance and protection against deposits, sludge and engine wear PERFORMANCE PROFILE: ACEA A3/B4 API SN Ford WSS-M2C937-A MB 229.5 Porsche A40 (Approved) Renault RN0700 / RN0710 SUITABLE FOR: ACEA A3/B3 API CF BMW Longlife-01, BMW Longlife-98 Chrysler MS-12633 (SRT), Chrysler MS-10725 Fiat 9.55535-Z2, Fiat 9.55535-M2 GM-LL-B-025, GM-LL-A-025 MB 229.3, MB 229.1 Volvo VCC 95200356 VW 502 00 / 505 00, VW 500 00 / 501 01 AMG SAAB Asian manufacturers* * Asian manufacturers - including but not limited to Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, premium petrol engine oil formulated using the latest technology for use in petrol and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for OEM applications requiring a 0w16 viscosity, which provides protection against low-speed pre-ignition (LSPI) and timing chain wear. Ideally suited for Honda, Lexus, Nissan, Suzuki, Toyota and other Asian manufacturers. USER BENEFITS: Provides enhanced low-temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Delivers outstanding LSPI protection and ultimate in turbo charger care, even under the most extreme operating conditions Specifically formulated for use in all hybrid systems including self-charging hybrid electric vehicles (HEV) and plug-in hybrid electric vehicles (PHEV) Compatible for use with biofuels, DFT provides exceptional performance and protection against deposits, sludge and engine wear PERFORMANCE PROFILE: API SP, SP RC ILSAC GF-6B SUITABLE FOR: API SN PLUS RC, SN PLUS, SN RC, SN Asian manufacturers* * Asian manufacturers - including but not limited to Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional 5W-30 ECO is recommended for engines requiring a 5w30 viscosity targeting Ford, Jaguar Land Rover and Asian manufacturers. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA A5/B5API SL, CF SUITABLE FOR: ACEA A1/B1 Chrysler MS-6395 Dacia Ford WSS-M2C913-D, Ford WSS-M2C913-C, Ford WSS-M2C913-B ILSAC GF-4 Jaguar Land Rover STJLR.03.5003 Renault RN0700 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional C5 5W-20 is recommended for engines requiring a C5 5w20 viscosity targeting Ford Eco-Boost engines and Jaguar Land Rover. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C5 API SN SUITABLE FOR: ACEA A1/B1 Chrysler MS-6395 Fiat 9.55535-CR1 Ford WSS-M2C948-B, Ford WSS-M2C948-A Ford WSS-M2C925-B, Ford WSS-M2C925-A ILSAC GF-5 Jaguar Land Rover STJLR.03.5004 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, low SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional C4 5W-30 is recommended for engines requiring a C4 5w30 viscosity targeting Renault diesel powered vehicles including Mercedes Benz and Nissan. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which reduces emissions and provides extended drain capability Utilising low SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C4 SUITABLE FOR: Dacia Fiat 9.55535-S4 MB 226.51, MB 229.51, MB 229.31 Renault RN0720 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional 5W-40 C3 is recommended for engines requiring a C3 5w40 viscosity targeting 'Pumpe Düse' PD Volkswagen Audi Group, GM and Mercedes Benz. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C3 API SN, CF SUITABLE FOR: BMW Longlife-04 Fiat 9.55535-T2, Fiat 9.55535-S2 Ford WSS-M2C917-A GM dexos 2 GM-LL-B-025, GM-LL-A-025 MB 226.5, MB 229.51, MB 229.31 Porsche A40 PSA B71-2290 <2014 Renault RN0700 / RN0710 VW 502 00 / 505 01, VW 502 00 / 505 00 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional 5W-30 C3 is recommended for engines requiring a C3 5w30 viscosity targeting Volkswagen Audi Group, BMW and Mercedes Benz. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C3 API SN, CF SUITABLE FOR: BMW Longlife-04 Chrysler MS-11106 Fiat 9.55535-S3 GM-LL-B-025, GM-LL-A-025 MB 229.51, MB 229.31 Porsche C30 VW 504 00 / 507 00, VW 506 00 / 506 01 VW 503 00 / 503 01, VW 502 00 / 505 01 VW 502 00 / 505 00 Asian manufacturers Millers Oils underwrites this product for GM dexos 2 applications

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, low SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional C1 5W-30 is recommended for engines requiring a C1 5w30 viscosity targeting Jaguar Land Rover vehicles fitted with DPFs. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Utilising low SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C1 SUITABLE FOR: Ford WSS-M2C934-B Jaguar Land Rover STJLR.03.5005 JASO DL-1 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in both petrol and diesel engines. APPLICATION: Millers Oils Trident Professional 5w-40 is recommended for engines requiring a 5w40 viscosity meeting the manufacturer specifications. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which reduces emissions and provides extended drain capability Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA A3/B4 ACEA A3/B3 API SN, SM, SL, CF SUITABLE FOR: BMW Longlife-01 BMW Longlife-98 Chrysler MS-12991 Fiat 9.55535-Z2, Fiat 9.55535-N2 Fiat 9.55535-M2, Fiat 9.55535-H2 GM-LL-B-025, GM-LL-A-025 MB 226.5, MB 229.5, MB 229.3, MB 229.1 Porsche A40 PSA B71-2296 <2014, PSA B71-2295, PSA B71-2294 Renault RN0700 / RN0710 VW 502 00 / 505 00 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, semi synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in both petrol and diesel engines. APPLICATION: Millers Oils Trident Professional 10w-40 is recommended for engines requiring a 10w40 viscosity meeting the manufacturer specifications and MTF-94 Gear Oil Specification. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which reduces emissions and provides extended drain capability Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA A3/B4 ACEA A3/B3 API SN, SM, SL, CF MTF-94 Gear Oil Specification SUITABLE FOR: BMW Longlife-98 Fiat 9.55535-G2, Fiat 9.55535-D2 MB 229.3, MB 229.1 PSA B71-2300 <2014, PSA B71-2295 PSA B71-2294 Renault RN0700 / RN0710 VW 502 00 / 505 00, VW 500 00 / 501 01 Land Rover MTF-94 Gear Oil Specification

Read more less