Performance - VW Golf MK5 (2003-2008)

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!

Read more less

High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!  

Read more less

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

Scorpion Exhausts Volkswagen Golf MK5 R32 cat-back system Fits Years 2005 to 2008 Fits to OEM / Scorpion Pipe Diameter 76mm/3 From their beginnings in the 1930’s and now part of the VAG group Volkswagen have grown to be one of the world’s largest car manufacturers. Initially focusing on affordable family cars including the iconic Beetle all that changed in 1976 with the launch of the Golf/Rabbit Mk1 Gti one of the first hot hatches and a real game changer. Following on from the Gti’s immense success the early 2000’s saw the launch of the first of their high-performance R models the Golf 4 R32. It was only natural that one of the very first performance exhausts Scorpion produced was for the Gti back in the early nineties and they’ve continued to be one of our most popular models to date.    TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SVWS039 Product Type Cat-Back Resonated Non-resonated Fitment Years 2005 - 2008 Fits To OEM / Scorpion Model Fitment Mk5 R32 Pipe Diameter 76mm/3" * Tailpipe Daytona Tailpipe Diameter 100mm Shipping Dimensions 90cm x 78cm x 26cm

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

 This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap FITS: Audi A3 1.8 TSI 2WD 3-Door 2008 to 2012 Audi A3 2.0T FSI quattro 5 door SportBack 2004 to 2012 Audi A3 2.0T FSI 2WD 3 door 2003 to 2012 Audi A3 2.0T FSI 2WD 5 door Sportback 2003 to 2012 Audi S3 2.0 T quattro 3-Door 8P 2006 to 2012 Audi S3 2.0 T quattro Sportback 8P 2007 to 2012 Seat Leon FR 2.0 T FSI 200-211PS 2006 to 2013 Seat Leon Cupra 2.0T FSI 240PS 2006 to 2011 Seat Leon Cupra K1 2007 to 2009 Skoda Octavia vRS 2.0 TSI 2010 to 2013 Volkswagen Golf Mk5 GTi 2.0T FSI 2004 to 2009 Volkswagen Golf Mk5 GTi Edition 30 2.0T FSi 230PS 2006 to 2009 Volkswagen Golf Mk6 GTi 2.0 TSI 210PS 2009 to 2013 Volkswagen Golf Mk6 R 2.0 TFSI 270PS 2009 to 2013 Volkswagen Jetta Mk5 GLI 2.0T FSI 2006 to 2010 Volkswagen Scirocco GT 2.0 TSi 200PS 2008 to 2016 Large-bore Downpipe and De-catMust be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap Cast Downpipe with HJS High Flow Sports Catwith HJS HQ 200 Cell High Flow Sports Cat. For Fitment to Milltek Sport 2.75" cat-back systems only. Requires a Stage 2 ECU remap Cast Downpipe with Race Catwith 200 Cell Race Cat. For Fitment to Milltek Sport 2.75" cat-back systems only. Requires a Stage 2 ECU remap   Part No. Description Tailpipe Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU284 Large-bore Downpipe and De-cat - Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap 76.2 3 No 3 No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Want to tighten your grip on the road? Scorpion’s lightweight aluminium chassis braces tick all the boxes. The single-piece manufacturing process ensures a high-strength connection under load. Braces are powder-coated black and etched with the Scorpion mark.Our underbody bracing reduces performance loss due to chassis twist during hard braking or cornering. Enhanced body rigidity translates to a more direct feel with the road surface. (Fits both the Scorpion and OEM pipework.) SVAG007B Seat Leon Cupra R 2.0 TSi 10-12 Volkswagen Golf MK5 GTI & Edition 30 Volkswagen Golf MK6 GTI Volkswagen Golf MK6 GT TDI  Volkswagen Golf MK6 GTI Edition 35 Volkswagen Scirocco R

Read more less

Also fits Edition 30 model. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Golf GTI performance exhaust is made in 3"/76.2mm pipework and fits from the turbo backwards (Turbo back system) these exhausts replace the front pipe, standard catalyst, centre and rear sections. The high flow sports cat version will enable you to pass a UK MOT emissions test or police road side checks. The de-cat exhaust version is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The resonated sports exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. (Except turbo gasket). Note - Some of the fitted images may show alternative parts. Media Example of Golf GTI sports exhaust (turbo back- de-cat & non-resonated). Example of Golf GTI sports exhaust (turbo back- de-cat and non-resonated). Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Also fits Edition 30 model. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Golf GTI performance exhaust is made in 3"/76.2mm pipework and fits from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Media Example of Golf GTI sports exhaust (turbo back- de-cat & non-resonated). Example of Golf GTI sports exhaust (turbo back- de-cat and non-resonated). Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology. 

Read more less

Also fits Edition 30 model. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Golf GTI performance exhaust is made in 3"/76.2mm bore pipework and fits from the turbo to the centre section. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  Note: This product fits to O/E Cat Back exhaust only. All relevant fittings and gaskets are supplied. (Except turbo gasket). Media Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology. 

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Golf GT performance exhaust is made in 2.5"/63.5mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. All relevant fittings and gaskets are supplied. Note - Your vehicle may require the GTI rear valance (check if your bumper has the exhaust cutout). This can be purchased from your local VW garage. Media Example of VW Golf GT sports exhaust (cat back exhaust). Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Golf GT performance exhaust is made in 2.5"/63.5mm pipework and fit from the catalytic converter section backwards (Cat-back) these sports exhausts replace the centre and rear sections. All relevant fittings and gaskets are supplied. Note - Your vehicle may require the GTI rear valance (check if your bumper has the exhaust cutout). This can be purchased from your local VW garage. Media Example of VW Golf GT sports exhaust (cat back exhaust). Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Golf TDI performance exhaust is made in 2.5"/63.5mm pipework and fit from the catalytic converter section backwards (Cat Back) these exhausts replace the centre and rear sections. All relevant fittings and gaskets are supplied. Note - Your vehicle may require the GTI rear valance (check if your bumper has the exhaust cutout). This can be purchased from your local VW garage. Media Example of VW Golf TDI sports exhaust (cat-back exhaust). Example of VW Golf TDI sports exhaust (cat-back exhaust). Cobra Sport Exhausts VW promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

FITS: Volkswagen Golf Mk5 GTi Edition 30 2.0T FSi 230PS 2006 to 2009   Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. FITS: Volkswagen Golf Mk5 GTi Edition 30 2.0T FSi 230PS 2006 to 2009  Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. FITS: Volkswagen Golf Mk5 GTi 2.0T FSI 2004 to 2009 OPTIONS: SSXVW216 Large-bore Downpipe and De-cat SSXVW391 Large-bore Downpipe and De-cat SSXAU284 Large-bore Downpipe and De-cat Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap SSXSE143 Large-bore Downpipe and De-cat Must be fitted with the Milltek Sport 3-inch Race cat-back systems and requires a Stage 2 ECU remap SSXAU312 Large Bore Downpipe and Hi-Flow Sports Cat Must be fitted with the Milltek Sport 3-inch Race cat-back systems and requires a Stage 2 ECU remap SSXAU200 Cast Downpipe with HJS High Flow Sports Cat with HJS HQ 200 Cell High Flow Sports Cat. For Fitment to Milltek Sport 2.75" cat-back systems only. Requires a Stage 2 ECU remap SSXSE143 Large-bore Downpipe and De-cat Must be fitted with the Milltek Sport 3-inch Race cat-back systems and requires a Stage 2 ECU remap SSXSE154 Cast Downpipe with Race Cat SSXVW389 Cast Downpipe with Race Cat SSXVW390 Cast Downpipe with Race Cat SSXAU200R Cast Downpipe with Race Cat with 200 Cell Race Cat. For Fitment to Milltek Sport 2.75" cat-back systems only. Requires a Stage 2 ECU remap Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

FITS: Seat Leon FR 2.0 TDi 170PS DPF 2005 to 2013 Volkswagen Golf Mk5 GT 2.0 TDI 170PS DPF 2004 to 2009 NOTES: PIPE DIAMETER: 2.75" / 70MM TAILPIPE TWIN 80MM POLISHED Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

SPORTS EXHAUST MUFFLER EXHAUST-VOLKSWAGEN GOLF MK5-VOLKSWAGEN GOLF MK6Fits:  VW GOLF MK5 with following engines: 1.4 75 PS (55 kW; 74 hp) 1.4 80 PS (59 kW; 79 hp) 1.4 90 PS (66 kW; 89 hp) 1.4 TSI 140 PS (103 kW; 138 hp) 1.4 TSI 170 PS (125 kW; 168 hp) 1.6 102 PS (75 kW; 101 hp) 1.6 FSI 115 PS (85 kW; 113 hp)        2.0 FSI 150 PS (110 kW; 148 hp) 1.9 TDI 90 PS (66 kW; 89 hp) 1.9 TDI 105 PS (77 kW; 104 hp) 2.0 SDI 75 PS (55 kW; 74 hp) 2.0 TDI 140 PS (103 kW; 138 hp) 2.0 TDI DPF 140 PS (103 kW; 138 hp) 2.0 TDI DPF 170 PS (125 kW; 168 hp)       2.0 TFSI GTI 200 PS (147 kW; 197 hp) 2.0 TFSI GTI 210 PS (155 kW; 210 hp) 2.0 TFSI 230 PS (169 kW; 227 hp)   GTI and Edition 30 VW GOLF MK6 with following engines: 1.2 TSI  63kW 1.2 TSI  77kW 1.4 16V 59kW 1.4 TSI 90kW 1.4 TSI  120kW 1.6 16V  75kW 1.8 TSI  120kW 2.0 TFSI GTI 150kW  2.0 TFSI GTI 173kW   1.6 TDI  77kW 2.0 TDI 81kW 2.0 TDI 103kW 2.0 TDI 125kW ---------------------------------------- This item is new, high quality.Exhaust end is made of polished stainless steel. FEATURES: Diameter 100mm. Connection pipe diameter 65mm. Full approval entry into service of TUV. The sport exhaust comes with an EC approval / ABE.In our offer we have rear valance adapted to exhaust. Professional installation is highly recommended.

Read more less

SPORTS EXHAUST TIPSVOLKSWAGEN SCIROCCO R R32 LOOKVOLKSWAGEN GOLF V R R32 LOOKVOLKSWAGEN GOLF VI R R32 LOOK** For the standard version, modifications to the mounting brackets are required **This item is new, high quality.Exhaust end is made of polished stainless steel.REPLACES REAR OEM EXHAUST.Diameter 100mm. Professional installation is highly recommended. Fits cars with following engines: 1 1.4 16V 2 1.4 FSI 3 1.4 TSI 4 1.6 16V 5 1.6 FSI 6 2.0 FSI 7 2.0 TFSI 8 2.0 SDI 9 1.9 TDI 10 2.0 TDI

Read more less

SPORTS EXHAUST TIPS   -VOLKSWAGEN SCIROCCO R R32 LOOK   -VOLKSWAGEN GOLF V R R32 LOOK   -VOLKSWAGEN GOLF VI R R32 LOOK   This item is new, high quality.   Exhaust end is made of polished stainless steel.   REPLACES REAR OEM EXHAUST.   Diameter 100mm.       Professional installation is highly recommended.Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

FITS: Volkswagen Golf Mk5 2.0 TDI 140PS 2004 to 2009 NOTES: R32 STYLE REQUIRES R32 DIFFUSER R32 PIPE DIAMATER 2.75" / 70MM - DUAL 100MM TIPS OEM STYLE PIPE DIAMETER 2.75" / 70MM - DUAL 80MM TIPS Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

FITS: Volkswagen Golf Mk5 GTi 2.0T FSI 2004 to 2009 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. FITS: Volkswagen Golf MK5 R32 3.2 V6 2005 to 2009 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less