Performance - VW Golf MK7 (2012-2020)

Brake SystemTRW Height mm69 Length mm175 Thickness mm20 Wear IndicatorIntegrated PR No.1LM Disc Ø mm340 Fitting PositionFront   Brembo Brake Pad (Front) Brake pads form a vital part of the disc brake system. The friction material is applied onto the brake disc surface by the caliper pistons to generate the friction to stop the wheels turning. Brake pads are goverened by legislation known commonly as "REGULATION 90". They should be replaced when worn excessivley or when replacing the brake discs. Must be replaced in axle sets. Check for any other compnents to replace such as wear sensor leads or pad fitting pins.

Read more less

Bolt Hole Circle mm112 Brake Disc TypeVented Centering Diameter mm65 Height mm50 Minimum Thickness mm27 PR No.1LM No.Holes5 Disc Ø mm340 Fitted Quantity2 Fitting PositionFront   Brembo Brake Disc (Front) Most modern cars have disc brakes on the front wheels, and some have disc brakes on all four wheels. The function of the brake disc is to slow down or stop the car. When the brake pedal is pressed the brake pads "squeeze" the brake disc which generates friction. Brake discs should be replaced when they are worn below the minimum thickness, worn unevenly, warped or heavily scored. Should be replaced in pairs with new brake pads fitted at the same time.  

Read more less

VW Golf MK7 (Strut 54.5) (13+) 7/6kg.mm Coilover Type: RA Product Code: H-24-BR-RA SKU: 0027114 This is the kit we recommend for the best balance of performance and comfort, designed by the factory to have the best overall compromise of spring rate, ride height range, top mount design and damping rate to suit the majority of car owners. It is more than capable of dealing with fast road and track work but also retains a high degree ride civility so the car can still be used for mundane duties and long journeys without the ride becoming tiring. The RA series coilover kits are supplied with aluminium front top mounts with pillowball centres (camber adjustable if macpherson) and aluminium rear top mounts with rubber centres or no top mounts

Read more less

Ultra bright footwell Unit upgrade for the Golf MK7 - Now as a FULL REPLACEMENT UNIT! We’ve implemented our Enhanced Edition technology into an ultra bright footwell upgrade for this VW Legend Please note for these to fit your vehicle must already have footwell lights installed, as these are a direct replacement for Factory footwell units upto 36X brighter than a standard footwell light and available in 3 colours The unit features 18 Ultra bright SMD chips (Which each chip is 2x brighter than oem) and is placed inside a fully replacement unit designed to disperse the light effectivly and efficiently, to give you an ultra bright footwell WITHOUT impeding visibility when driving! Confirmed Fitment: VW Caddy 2004-2012 VW EOS 2006 > VW Golf MK5 VW Golf MK6 VW Golf MK7 VW Jetta MK5 VW Passat B6 VW Polo MK5 VW Tiguan MK1 Skoda Superb MK2 MAY FIT OTHER VAG GROUP MODELS - PLEASE ENQUIRE VIA EMAIL May also fit in other areas of the car such as Boot & Glove Box on some models. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.

Read more less

C:Performance Gel Overlay for the MK8 Fiesta ST engine cover. Covers the “Ford Performance” logo already on the engine bay with a Black gel badge - the writing being Chrome/Mirror  Stickers over the existing badge which means it does not need to be removed! Great compliment to a car running our C:Performance branded hardware! 

Read more less

A direct replacement for the standard part, Direnza radiators feature twin-core technology for optimised cooling capability. Constructed from aircraft grade aluminium (a material well-known for its excellent thermal conductivity), our radiators are the perfect addition to any car, including those driven hard on track. Designed and developed in-house by Direnza engineers, our radiators provide as much as 40% additional cooling capacity compared with standard radiator systems, their robust yet intricate design, and exceptional cooling performance a testament to our R&D processes. Direnza radiators are TIG-welded for additional strength and durability. TIG welding also provides a more precise finish than MIG welding, and reduces stress on the material at hand. Our radiators will enhance the appearance of any engine bay. Fitment VW Golf MK7 / MK8 2.0 R / TSI /2013+ models. Product Category Intercooler / Radiator Part Number DZRA093 Intercooler / Radiator - Core Height (mm) 430mm Intercooler / Radiator - Core Length (mm) 675mm Intercooler / Radiator - Core Width (mm) 40mm Intercooler / Radiator - Inlet Size (mm) 32 Push Fit Intercooler / Radiator - Outlet Size (mm) 32 Push Fit Intercooler / Radiator - Overall Height (mm) 450

Read more less

Racingline Stage 2 ‘EVO’  Monoblock Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652000-RED) or Black (VWR652000-RED)] OR Blue (VWR652000-BLU) Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 345mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment - VWR652000 RED/BLK/BLU > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ Confirmed Fitment - VWR652003 RED/BLK/BLU > VW Golf 5 GTI 2005-2008 > VW Golf 5 R32 2005-2008 > VW Golf 5 GTI ED30/Pirelli 2006-2007 > VW Golf 6 GTI 2009-2014 > VW Golf 6 R 2009-2014 > VW Scirocco R 2009-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > SEAT Leon II Cupra/R 1P 2006-2012 > SEAT Leon II 1P 2005-2012 > Skoda Octavia II vRS 1Z 2004-2013 Applications Please note, customers are wholly responsible for checking fitment for their vehicle.

Read more less

SPOILER EXTENSION VW GOLF MK7 STANDARD  Fits only: VW Golf MK7 STANDARD (2012-2016)   Please Note:  ** The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. **   COMPLETE SET CONTAINS:-> Spoiler Extension with 3M Tape-> Degreasing Cloth Fitting manuals: https://www.maxtondesign.co.uk/pdf/cap-spoiler_fitting-manual-maxton.pdf Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

Pagid Dot4 Brake Fluid 500ml Pagid Dot 4 brake fluid is recommended for brake and clutch systems for which a non - petroleum fluid is specified, including ABS. Pagid DOT 4 brake fluid covers a wide range of vehicles and provides consistent performance across the temperature range. Suitable for ABS systems. Safe to mix with existing DOT 3, DOT 4. Minimum dry boiling point at 260?C. Minimum wet boiling point at 165?C. Meets the following performance specifications: FMVSS 116 DOT 4 - SAE 1703 - ISO 4925 Pagid Dot5.1 Brake Fluid - 500ml Pagid brake fluid covers a wide range of vehicles and provides consistent performance across the temperature range. In conjunction with Pagid Ceratec, Pagid brake fluid is the ideal solution for your next brake system service. Pagid Dot 5.1 fully meets the requirements of the latest issue of the US FMVSS 116 DOT 5.1 SAE J 1703, SAE J 1704 and ISO 4925 Specifications. Equilibrium Reflux Boiling point?ERBP 260? ?( it is the minimum boiling point of new or unpolluted fluid) Wet Equilibrium Boiling Point WEBP ?180?C minimum Kinematic Viscosity at -40 deg C = 900 cSt max

Read more less

Buy with confidence from the largest UK and EU JR Wheels Distributor! Model: JR18 Diameter: 18" Width: 7.5" Offset/ET: 40 Colour: Hyper Grey PCD: 5x112 & 5x114.3. These wheels are double drilled for 2 different PCDs. This wheel can accommodate any Centerbore up to 74.1. To ensure a perfect fit, Spigot Rings will be provided to match your car's Centrebore.Double Drilled PCD Notes: When using the larger of the two pcds on JR double drilled wheels, you will require slim style internal drive wheel nuts/bolts - we have plenty of these available in the wheel nuts & bolts section here. IMPORTANT: Check for shipping damage and test fit wheels before fitting tyres. We cannot rectify shipping damage or accept returns for wheels that have had tyres fitted JR Wheels are dispatched from the main EU warehouse, and will take a minimum of 3-5 days to ship regardless of shipping option chosen. As most of the JR Wheels are stocked in blanks, once a set of wheels is sent to be drilled the order can not be cancelled. Please ensure you check you have ordered the correct fitment and size before ordering, as once placed these can not be cancelled

Read more less

The higher the boost, more fuel and air is needed. To solve the issue with turbo lag, They've created their own designed Leyo Motorsport turbo inlet pipe. This full aluminium piece increases the reliability and unrestricted airflow direct to your turbocharger. With Leyo Motorsport’s research and developers, they've manufactured what we believe to be one of their best and most important performance products, the Leyo Motorsport turbo inlet pipe. More air being sucked into your turbo will allow horsepower gains not seen from OEM units. They’ve enhanced the size of the inlet pipe to give better throttle response, more linear power feed, and more leeway when tuning your performance vehicle. Leyo Motorsport turbo inlet pipe can have on your pride and joy. Be sure you’re quick to order as demand is currently through the wastegate. Designed by Leyo and tested by the Leyo Motorsport team HQ. Full aluminium tubing. CNC Aluminum Shark Fin flange for secure fitment. CNC Aluminum OEM neck for secure fitment Fits all Air Intake system on the market. Smooth, more linear power gains. Larger than the OEM unit for increased air flow. Simple installation Powder coated & laser etched logo. Race Track Proven

Read more less

The APR Billet Stainless-Steel Dogbone / Subframe Mount Insert limits driveline movement, which helps to minimize wheel-hop and torque steer. This provides a more direct driving experience by eliminating slop in the driveline and does so without introducing excessive or uncomfortable driveline vibration and noise. The APR insert is created from thick, billet, stainless-steel. All mounts will slightly deform under use, but unlike all other units created from rubber, polyurethane, and even billet-aluminum, the APR unit will not heavily deform to the point of failure. Rest assured this simple upgrade will last the test of time, unlike others, and packs a limited lifetime warranty against cracking! We offer the mount in two different configurations depending on the style of your factory mount. Be sure to check your subframe mount before purchase.

Read more less