Performance - VW Golf MK7 (2012-2020)

Raise the level of style on your Volkswagen MK7.5 GTI or MK7.5 Golf R with the ECS Tuning Carbon Fiber Rear Bumper Flares. This quality addition was engineered and designed in-house to fit directly to your factory rear bumper cover, with no modifications required and are 100% compatible with P.D.C. sensors.  These were designed to provide the vehicle with a more aggressive look by accentuating the area around the bumper corners and reflector housings, providing a bold, aggressive styling similar to that of the VW R400 Concept Car. An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Rear Bumper Flare Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the rear bumper cover using the pre-applied adhesive tape to accentuate the area around the fog lights, providing a similar, aggressive look to the R400 concept car Dramatically improves the appearance of the rear end and adds a wide, aggressive stance from rear and side of vehicle Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Engineering Team    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Rear Bumper Flare Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area with an alcohol wipe or similar cleaner, and apply the Flares directly to the rear bumper cover using the pre-applied adhesive tape.     ** All other products shown in installed photography are NOT included... This kit is for QTY 2 rear bumper flares ONLY!  ** *2 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

The ECS Tuning Rear Diffuser Add-On Kit easily installs over the factory rear valance on your 2018+ Volkswagen GTI to provide the appearance of an aggressive diffuser, without the need to remove your OEM valance. Engineered in-house, our rear diffuser overlay will be sure to catch attention and turn heads! Featuring more aggressive outer blades and three new center blades to fill the massive void in the factory valance. Installs easily with our sleek mounting brackets and included hardware.    PART DESIGN Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Overlays the factory valance to provide aggressive rear diffuser styling  Outer blades are designed around the OE blade surfaces and made more aggressive by lengthening and tapering the blade towards the bottom Center blades fill the empty cavity of the OE valance and feature countered upper mating surfaces to the OE valance for a seamless fit The bottom of the valance has provisions for mounting to the OE body brackets Sheet metal brackets are used to mount to the bottom of the OE diffuser using stainless steel hardware and rubber insulated well nuts Textured matte black finish resembles the OE valance texture for OE+ appearance  Manufactured from ABS vacuum formed plastic with UV additives to stand up to the abuse from the elements   KIT CONTENTS Rear Valance Overlay  Rear Valance Mounting Brackets (4) Side Blade Self Tapping Screws (2) Upper Mounting Rubber Insulated Well Nuts (4) Black Oxide Stainless Button Head Screws (6) Black Phosphate Barrel Nut Clips (2)     PRODUCT DEVELOPMENT Our ECS Rear Diffuser Add-On Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing   INSTALLATION AND SUPPORT Need installation tips? We put together a full installation tutorial from start to finish. See our Installation PDF under the INSTALLATION Tab for more information. 

Read more less

Raise the level of style on your VW MK7 Golf R with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Includes OE-Grade T25 torx self tapping screws for durable installation   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing, including numerous high-speed runs!    INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware makes for an easy, non-permanent installation that provides a confident, secure fitment. Reference our Installation Guide for proper prep. and installation procedures.  *4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Raise the level of style on your VW MK7.5 Golf R with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Mounts to existing lower valance mounting locations using heavy duty carbon fiber mounting brackets with supplied hardware An optional well nut insert and machine screw secures the front center of the bumper. Requires drilling into the bumper cover for use.  Includes OE-Grade T25 torx self tapping screws for durable installation   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing, including numerous high-speed runs!    INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware makes for an easy, non-permanent installation that provides a confident, secure fitment. Reference our Installation Guide for proper prep. and installation procedures. The optional well-nut and bolt require drilling into the center of the bumper. Simply position the front lip to the center of the bumper, mark, drill and install the well-nut for a secure fitment.   *4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Upgrade the exterior styling on your 2018+ Volkswagen MK7.5 Golf R with our ECS Tuning Gloss Black Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Gloss Black Diffuser!    PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Houses 4.0" round exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Please note, our diffuser is not compatible with some larger aftermarket oval exhaust tips Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser. Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer   KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7.5 Golf R Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM valance in detail! See our Installation PDF under the INSTALLATION Tab for more information.

Read more less

NEUSPEED Rear Sway Bar Performance Links provide direct transition of suspension movement to the anti-roll bar. Features: CNC machined from billet 7075-T6 Aluminium then black hard anodized. Precision teflon lined spherical bearings, made in USA. Stainless steel spacers. High grade bolt. Direct replacement for OEM sway bar link. Notes: Sold as a pair.

Read more less

NEUSPEED Anti-Roll Bars give you the ultimate in handling, precision engineered with smooth mandrel bends, aerospace-quality steel and graphite impregnated urethane bushings. NEUSPEED Anti-Roll Bars improve performance by reducing body roll during cornering, increased steering response and grip, yet retain a comfortable ride during straight-line cruising. With our 40+ years experience in suspension tuning for street and track we offer the correct size bars for the best balance and ultimate handling. Notes: Fits: 2014-up Audi A3(8V) FWD, 2015-up VW MK7 GTI and Golf. 2 Hole adjustable bar. Sway Bar Rate:Forward Hole - 25% increase over stock GTI 24mm bar.Rearward Hole - 48% increase over stock GTI 24mm bar. Red powder coated light weight tubular bar. Designed and engineered Camarillo, California. Proudly manufactured in USA. Actual parts shown in photo.

Read more less

NEUSPEED Anti-Roll Bars give you the ultimate in handling, precision engineered with smooth mandrel bends, aerospace-quality steel and graphite impregnated urethane bushings. NEUSPEED Anti-Roll Bars improve performance by reducing body roll during cornering, increased steering response and grip, yet retain a comfortable ride during straight-line cruising. NEUSPEED 25mm (1") Rear Anti-Roll Bar is recommended to use with the factory original front bar or the NEUSPEED 25mm (1") Front Anti-Roll Bar. Great for street use and will give a more stable and netural handling vehicle around turns. With our 40+ years experience in suspension tuning for street and track we offer the correct size bars for the best balance and ultimate handling. Notes: Fits: 2014-up Audi A3(8V) FWD, 2015-up VW GTI and 2015-up Golf with independent rear suspension. Sway Bar Rate:101% increase over stock GTI 21.7mm bar. Red powder coated light weight tubular bar. Designed and engineered Camarillo, California. Proudly manufactured in USA. Actual part shown in photo.

Read more less

NEUSPEED Rear Torsion Bar will give you the ultimate in handling for your Golf Mk7, A3 8V, Octavia Mk3 or Leon Mk3 with a Fixed Rear Beam. Eliminate that unsafe and annoying body roll when cornering, the NEUSPEED Bar will increase factory rear axle beam rigidity and improve performance by reducing body roll during cornering, increase steering response and grip without causing a rougher ride. NEUSPEED Rear Torsion Bar can be use with the factory original front bar or with the recommended NEUSPEED 25mm (1") Front Anti-Roll Bar. Great for street use and will give a more stable and neutral handling vehicle around turns. Notes:Fits: 2015-up Audi A3 with Torsion Beam Rear Axle 2015-up VW Golf and Golf SportWagen with Torsion Beam Rear Axle Features: 22mm (7/8") Solid Bar Rear Body Roll Reduced by 50% 6.5mm (1/4") Steel Formed and Welded Mounts Red Powder Coat Finish High Grade Hardware Bolt-On Installation Designed and Engineered Camarillo, California.

Read more less

NEUSPEED Anti-Roll Bars give you the ultimate in handling, precision engineered with smooth mandrel bends, aerospace-quality steel and graphite impregnated urethane bushings. NEUSPEED Anti-Roll Bars improve performance by reducing body roll during cornering, increased steering response and grip, yet retain a comfortable ride during straight-line cruising. With our 40+ years experience in suspension tuning for street and track we offer the correct size bars for the best balance and ultimate handling. Notes: Fits: 2014-up Audi A3(8V) Quattro, 2015-up VW MK7 'R' and Golf 4motion. 2 Hole adjustable bar. Sway Bar Rate:Forward Hole - 43% increase over stock 'R' 24mm bar.Rearward Hole - 71% increase over stock 'R' 24mm bar. Red powder coated light weight tubular bar. Designed and engineered Camarillo, California. Proudly manufactured in USA. Actual parts shown in photo.

Read more less

APR Roll-Control Front Stabiliser Bar- Diameter: 28.6mm- Construction: Weight Saving Hollow Bar- Adjustment: 2-Way Adjustable APR Roll-Control Stabiliser Bars are designed to improve corner handling without diminishing ride quality. This simple, yet effective upgrade reduces cornering load differentials between your vehicle’s inner and outer wheels during cornering. In doing so they improve the vehicle’s under and oversteer balance, giving the vehicle greater stability and control, with increased grip. Each bar is manufactured using the latest high-end techniques to offer a strong, weldless design capable of withstanding harsh track conditions. Front and rear bars are sold separately, but are designed for use together. Rear bars include a new set of poly bushings to further reduce undesirable suspension flex. Front bars also include new bushings, as well as new mounting brackets with hardware, and billet spacers. Lastly, where applicable, some bars offer further fine-tuning through the addition of multiple suspension pickup-points

Read more less

APR Roll-Control Rear Stabiliser Bar- Diameter: 25.4mm- Construction: Weight Saving Hollow Bar APR Roll-Control Stabiliser Bars are designed to improve corner handling without diminishing ride quality. This simple, yet effective upgrade reduces cornering load differentials between your vehicle’s inner and outer wheels during cornering. In doing so they improve the vehicle’s under and oversteer balance, giving the vehicle greater stability and control, with increased grip. Each bar is manufactured using the latest high-end techniques to offer a strong, weldless design capable of withstanding harsh track conditions. Front and rear bars are sold separately, but are designed for use together. Rear bars include a new set of poly bushings to further reduce undesirable suspension flex. Front bars also include new bushings, as well as new mounting brackets with hardware, and billet spacers. Lastly, where applicable, some bars offer further fine-tuning through the addition of multiple suspension pickup-points

Read more less