Performance - VW JETTA MK6 (2010-2019)

TRIPLE QX Purple (G13) (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements TRIPLE QX Purple Ready Mixed Antifreeze/Coolant (G13) 5Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection upto -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements. TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 5Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection up to -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Purple Antifreeze/Coolant (G13) 1Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution.   TRIPLE QX Purple Concentrated Antifreeze/Coolant (G13) 5Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Purple Antifreeze/Coolant (G13) Concentrate 20Ltr Like to have a clean windscreen? Why not buy 20 litres to save you having to keep ordering more! Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

TRIPLE QX Red (Concentrate) Antifreeze/Coolant 1Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard. recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 5Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard, incorporating the latest in Organic Acid Technology (OAT). Recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value. Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 20Ltr Why not buy 20 litres to save you having to keep ordering more! 1 x 20litres of Red Concentrate Antifreeze/Coolant

Read more less

TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 1Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements. TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 5Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 1ltr TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 5ltr Full organic long life coolant, 1-2-Ethanediol based Organic acid technology formula. Ethanediol based coolant, silicate, boron, phosphate, nitrite and amine free, which is a multipurpose long life formulation dedicated to engine which require . Dex-Cool coolant Recommended in engine cooling circuit which needs GM6277M norm   

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

TRIPLE QX Orange Concentrated Antifreeze/Coolant - 1ltr   TRIPLE QX Orange Concentrated Antifreeze/Coolant - 5ltr  

Read more less

TAKE THE PRESSURE. BEAUTIFUL BILLET REPLACEMENT EXPANSION CAP. Doesn't your pride and joy deserve better than cheap plastic parts in the engine bay?  WHY CHANGE? The RacingLine Coolant Expansion Tank Cap will keep your coolant expansion tank at its perfect pressure to be sure that your high-performance engine’s coolant system is performing exactly as it should.  The cap's a critical part of your car's cooling system to ensure that correct pressure is maintained, and never exceeded. Older, worn stock coolant caps loose the ability to hold correct pressure to keep the coolant at maximum efficiency. This is an engineered, billet replacement coolant cap to replace the cheap plastic one, with sophisticated internal springing and bleed off.  Don’t confuse this RacingLine full replacement cap with other cheap covers - which simply stick on over the plastic cap. We think your car deserves better than that. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC 5-axis technology. Each cap starts life as a solid billet of aerospace-quality 6061 aluminium. Sophisticated internal Japanese-made springing and bleed off mechanism. Polished, then gloss-anodised in stunning Midnight Black to stay beautiful for year after year. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 5 GTI 1.4 TSI 6R 2008-2015 > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > VW ID.Buzz 2023+ > VW ID.4 2020+ > VW Amarok 2010-2020 > VW ID.3 2019+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Audi Q5 3.0 TDI II FY 2017+ > Audi Q4 E-tron 20210+ > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Arona 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Cupra Born 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Enyaq 2021+

Read more less

TRIPLE QX Blue Antifreeze/Coolant 1Ltr Our High quality Blue Antifreeze and Coolant has a powerful formula with 2 years protection for all seasons. It is suitable for any vehicle currently using Blue antifreeze / coolant and meets BC6589 (1992) Standard. Awarded BEST BUY by Car Mechanics Magazine based on heat / frost resistance and value for money! Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Blue Antifreeze/Coolant 5Ltr TRIPLE QX Blue Antifreeze/Coolant 20Ltr Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

The oil filter housing on modern VAG engines does not allow for the previously common takeoff plates to fit under the filter and divert oil into an oil cooler mounted elsewhere on the vehicle. Instead they now use a oil to water cooling ‘block’ bolted to the front of the engine, and in many cases an undersize filter, or a paper drop in element, which prevents easy fitting of an oil cooler. As many people have found, if the vehicle is tuned, or if it is towing a heavy load, oil temperatures can rocket, with oil temperatures over 120°C (250°F) being easily achieved, which is close to the point that engine oil starts to break down. The Forge Motorsport FMOC2 replaces the oil to water cooling block, and although it still allows coolant to circulate, it more importantly gives two M22 takeoffs which, when fitted with the appropriate adaptor, allow fitment of oil cooler lines between an -6 and an -10 in size which can then be attached to an external oil cooler. Oil temperatures are stabilised, and engines can be worked harder for longer. To confirm fitment, please check the list of compatible vehilces below. This plate replaces the VAG OEM Part No. 03L 117 021 C. It fits ALL of the 2.0TDi and 1.6 TDi engines in the vehicles listed below. VW 2010-on Amarok, 2012-on Beetle, 2010-on Caddy, 2012-on CC, 2012-on Crafter, 2011-2016 Eos, 2012-on Golf Cabriolet, 2009-on Golf, 2009-2014 Golf Plus, 2011-on Jetta, 2011-on Passat, 2010-on Polo, 2009-on Scirocco, 2008-on Tiguan, 2011-on Touran, and 2010-on Transporter Audi 2011-on A1, 2009-2013 A3, 2008-on A4, 2012-on A5, 2011-on A6, 2012-on Q3, 2009-on Q5, and 2011-on TT Skoda 2011-on Fabia, 2009-on Octavia, 2012-on Rapid, 2011-on Roomster, 2008-on Superb, and 2010-on Yeti Seat 2011-on Alhambra, 2007-on Altea, 2009-on Exeo, 2009-on Ibiza, 2011-on Leon, and 2013-on Tolde   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Cars

Read more less

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge VW Golf MK1 Race car in the harshest of environments and exceeding all expectations, the Forge turbo blanket is designed to assist in the protection and prolonging the life of the engine components. ·       Stainless Steel Rivets·       Stainless Steel Fasteners·       Carbon fabric Outer Shell·       Calcium Magnesium Silicate Wool constructed Inner Core·       High temperature silica fabric The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers: AudiA1A1 (8X) 2010-20181.4 TSI 2015 OnwardsA31.4 TSI/TFSI 2015 Onwards (8V)S32.0 TSI (8V Chassis)S4B9TTSMk3 8S 316bhp (late 2022-)CupraAteca(up to 2020)Formentor2.0 TSI (310 BHP)SeatIbizaMk4.5 (6P) 2015-20171.4 TSILeonMk3 2012-20201.4 TSI 125/140/150 BHP 2014-2019Cupra 280/290/300RSkodaSuperb280 4x4 DSGVolkswagenArteon(2017-2020)(2020-)GolfMK71.4 TSI 125BHP/138BHP/150BHPGTIGTI Clubsport ED40RMK7.51.4 TSI 138BHP/150BHPGTI RMK8RJettaMK6 (2010-2018)1.4 TSIMK7 (2018-2021)1.4 TSI2.0 GLIMK7.5 (2021-)2.0 GLIPoloGTI 2.0 2018-2020 AW ChassisT6T6 (2015-2019)2.0 TSITiguan2.0 TSI 2017 OnwardsR 2022 Onwards (Gen 4) Interior Surface: ·       Max Temperature Rating: 2300°F/1260°C·       Continuous Use Limit: 1832°F1000°C Exterior Surface: ·       Direct Contact Limit: 1800°F/982°C·       Radiant Heat Limit: 2500°F/1371°C   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

Read more less

Product Details If you're looking for an easy, inexpensive way to enhance your underhood appearance or if your engine bay could use a touch of premium carbon fiber then we have you COVERED! Our ECS Tuning in-house designed and engineered Carbon Fiber Expansion Tank Cover Kit features precision 3D designed, gloss clear-coated carbon fiber overlays that simply lay over top of your OEM expansion tank and enhances the underhood appeal while covering up the ugly, opaque white plastic coolant ball. Our precisely modeled 2-piece overlays feature a smooth, appealing exterior design with provisions machined for clearance on OE features such as coolant hose connections and the coolant level sensor. Pre-applied high-temperature automotive-grade 3M foam tape ensures the parts stay in position while creating a great seal between the upper and lower covers.    PART DESIGN Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Made from lightweight, hand-laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured. Clear coated for excellent finish durability and UV resistance.  Hides the ugly, opaque, white plastic expansion tank  Pre-applied foam tape creates a lasting connection to the expansion tank while creating a seal between the upper/lower covers. 3M foam tape is resistant to the continuous heat in the engine bay and is resistant to chemical degradation.  Lug feature on upper overlay covers the expansion tank vent  Incorporated sight-window allows visibility of coolant level with both covers installed  Expansion tank mounting bolts remain accessible, allowing removal of expansion tank while keeping the covers in place  Compatible with all windshield washer reservoir mounting locations on various models  Compatible with the following expansion tank caps: OEM, Audi R8, Porsche 991 and Gen3 "B"    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Expansion Tank Cover Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Ensure your OEM expansion tank is clean and free of debris prior to installing self-adhesive foam strips. We recommend wiping the contact surfaces with isopropyl alcohol prior to installation. Reference our General Installation Guide for tips and suggestions.    NOTE: This part is for QTY 2 covers (upper and lower). All other items shown are for media reference only. This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8U Q3 FWD 2.0T Audi 8U Q3 Quattro 2.0T Audi A3 8P FWD 2.0T Audi A3 8P FWD TDI Audi A3 8P Quattro 2.0T Audi A3 8P Quattro 3.2L Audi A3 8P Quattro V6 3.2L Audi TT MKII FWD 2.0T Audi TT MKII Quattro 2.0T Audi TT MKII Quattro 3.2L Audi TT MKII TTS 2.0T Audi TTS MK2 (2006-2013) 2.0T Volkswagen Beetle All 1.8T Gen3 Volkswagen Beetle All 2.0T Volkswagen Beetle All 2.0T Gen3 Volkswagen Beetle All 2.5L Volkswagen Beetle All TDI Volkswagen CC 4Motion VR6 Volkswagen CC FWD 2.0T Volkswagen CC FWD VR6 Volkswagen EOS All 2.0T Volkswagen EOS All 3.2L Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sedan 1.4T Hybrid Volkswagen Jetta VI Sedan 1.8T Gen3 Volkswagen Jetta VI Sedan 2.0 Volkswagen Jetta VI Sedan 2.0T Gen3 GLI Volkswagen Jetta VI Sedan 2.5 Volkswagen Jetta VI Sedan GLI Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift 1.4T Volkswagen Jetta VI Sedan Facelift 1.4T Hybrid Volkswagen Jetta VI Sedan Facelift 1.8T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0L Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI Volkswagen Passat B6 4 Motion 3.6L Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B6 FWD 3.6L Volkswagen Passat B7 FWD 1.8T Gen3 Volkswagen Passat B7 FWD 2.0T Gen3 Volkswagen R32 MKV All 3.2 Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

REVO AIR INTERCOOLER 1.8/2.0 TFSI The Revo Intercooler utilises unique design features to lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software. The unique end tank profile promotes internal laminar flow thus decreasing turbulence and increasing airspeed into the bespoke bar and plate core. These features enhance charge air cooling giving you access to more power throughout the rev range. The limitations of the stock intercooler were apparent throughout testing. The stock part consistently struggled to manage charge air temperatures, even under normal driving conditions. The Revo Intercooler has been designed to improve on every restrictive element of the stock cooler, enhancing cooling efficiency by lowering intake air temperatures even compared to the Audi S3 (8P) cast aluminium intercooler, allowing you to drive harder, for longer. KEY FEATURES Bar & Plate Core Design Fully Cast End Tanks OEM Fitment 51% Increased Core Volume over a standard cooler 21% Increased Core Volume over an OE S3 cooler Lower Intake Temperatures INCREASED CORE VOLUME The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Designed from the ground up, the Revo Intercooler has a much larger core volume than the OEM part and offers perfect fitment, improving cooling by utilising the full volume of the stock location space as well as cold ambient air from the front of the vehicle. END TANK DESIGN End tanks play an important part in managing pressure drop and work in harmony with the core to promote airflow, the stock ones are inefficiently designed and create turbulent air in corners. These sections create a naturally small cross-sectional flow area, slowing charge air and increasing pressure drop. The Revo end tank geometry maintains the largest possible cross-sectional flow area to and from the core by removing these turbulent pocket areas found in the OE design. Coupled with a cast interior surface finish, the Revo end tanks allow air to flow freely without obstructions from turbulent air pockets found in the OE intercooler. End tanks play an important part in maintaining pressure and work in harmony with the core to promote airflow, the Revo end tanks are designed to offer the optimal balance between both of these key features.   BAR AND PLATE CORE Designed with a bar and plate core to maximise the efficiency of heat transfer and minimise flow resistance, the Revo Intercooler easily outperforms similar tube and fin alternatives in both aspects. The Revo Intercooler goes a step farther: featuring carefully specified fin sizing and geometry to further optimise the balance between air cooling and flow restriction. The ambient core side utilises shorter fins with specially designed louvres to slow ambient air passing through the core, which improves heat transfer. While the charge core side features an offset internal fin design to balance surface area and air resistance to aid cooling ability and minimise pressure drop.   SILICONE HOSES Supplied with stronger oil resistant silicone hoses, the Revo Intercooler can be installed using the stock pipework or recommended Revo Intercooler pipework (Coming soon). The internal diameter of each silicone is precisely matched to the inner diameter of the ribbed intercooler inlet and outlet connections along with a unique Flush Fit design, allowing a smooth transition between components.   BRACKETS To ensures precision fitment, Only Revo offers a CNC machined bracket system. Produced to a superior tolerance than that of a cast mounting system, this unique feature also ensures that the supporting brackets are strong and less prone to failure.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house dyno and Revo data acquisition software. The Revo intercooler minimises turbulence while maximising heat transfer, promoting cooler air temperatures and low-pressure drop. This helps retains power and torque throughout of the rev range as highlighted during controlled Dyno testing. The Revo Intercooler was tested in-house to compare the performance against that of the stock Intercooler. First tested on a vehicle running the OE S3 (8P) intercooler with a Revo K04 Kit, Revo production KO4 software, a Revo air intake system and full Eurojet exhaust, the Revo Intercooler was then installed and tested in the same controlled environment to highlight the benefits of it's enhanced cooling. PERFORMANCE DATA Golf GTI TSI EA888 Gen1 with Revo K04 upgrade, OE S3 (8P) intercooler and Revo open cone air intake system and full Eurojet exhaust. Showing the last of five consecutive dyno runs, the efficiency of the Revo Intercooler over the OE S3 intercooler is highlighted. With max gains of +8 HP & +11NM Torque, along with increased performance throughout the entire rev range, the stock intercooler struggles to effectively function in comparison to the Revo Intercooler which remained consistent throughout, losing no peak power over the 5 runs. INLET TEMPERATURE This is a metric used to confirm that testing on the Revo Intercooler. This is used to show that the air temperatures going into the intercooler were similar for each test, confirming that outlet temperatures shown in the following graphs are purely down to differences in intercooler design/construction. As can be seen, the inlet temperatures during testing were equal between both coolers, yet the Revo intercooler produced the lower outlet temps proving the cooling efficiency advantage. OUTLET TEMPERETURE This graph illustrates the increased cooling performance of the Revo intercooler vs OEM S3 (8P) aluminium intercooler over all five runs. The Revo Intercooler keeps temperatures well below the OE S3 intercooler throughout all 5 runs.     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi A3 (8P) 1.8 / 2.0TFSI 2004-2013 Audi S3 (8P) 2.0 TFSI 2006-2012 Seat Altea 1.8 / 2.0 TFSI/TSI 2004-2010 Seat Leon (MK2) 1.8 / 2.0 TFSI/TSI 2004 - 2012 Seat Toledo 1.8 / 2.0 TFSI 2004 - 2009 Skoda Octavia (MK2) 1.8 / 2.0 TFSI/TSI 2004 - 2013 Skoda Superb (B6) 1.8 / 2.0 TSI 2008 - 2013 Skoda Yeti* 1.8 / 2.0 TSI 2010 - 2013 VW EOS 2.0TSI 2006 - 2016 VW Golf (Mk5/6) 1.8 / 2.0 TFSI/TSI 2004 - 2014 VW Jetta (Mk5) 1.8 / 2.0 TFSI 2006 - 2010 VW Scirocco 2.0 TFSI/TSI 2009 - 2014 VW Tiguan* 2.0TFSI 2007-2010 * Yeti / Tiguan fitment for FWD vehciles only. Does not fit AWD.  DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo TFSI Intercooler Instructions NOTES Simple replacement of the OEM part Also available for the MQB Platform

Read more less