Performance - VW Polo MK5 (6R/6C) 2009-2017
RamAir RamAir Performance Induction Kit - VAG Models - 1.2 & 1.4 TSi
This Performance intake kit is designed to fit the MK7 Volkswagen Golf, Audi, Seat Leon, and Skoda that have the EA211 - 1.4 TSI/TFSI engine. Features 70mm intake diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Ramair Foam Filter Black powder coated aluminium intake pipe PVC intake ducting Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi A3 (8V) 1.4 TFSI
£199.45 - £208.95
PlexiClick® - Invisible Number Plate Holder Clip
This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily
£10.00
Cobra Sport Cobra Exhausts - VW Polo GTI (6C) 1.8 TSI (15-17) Turbo Back Performance Exhaust
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI 1.8 TSI performance exhaust consists of a 3" / 76.2mm front pipe and 2.5" / 63.5mm centre and rear and fits from the turbo backwards (Turbo back system) these parts replace the front pipe, standard catalyst, centre and rear sections. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces factory emissions devices and is not EC homologated. This may not meet current emission laws for road use in your territory. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. (Except turbo gasket). Press Release The latest vehicle to pass through the Cobra Sport exhaust development process is the MK6 VW Polo GTI 1.8 TSI. Having previously achieved impressive results from the previous 1.4 Polo GTI we were keen to get the new 1.8 litre model in for development to create a new range of Cobra Sport performance exhausts. The larger 1.8 litre engine in the new Polo GTI produces 190bhp as standard matched with an impressive 236 lb-ft of torque giving the lightweight Polo impressive performance figures on paper whilst creating an exhilarating drive. The Cobra Sport team were able to reduce the weight of the exhaust system by an impressive 41% over the OEM system with the resonated 2.5" cat back system weighing in at only 9.52kg compared to the original 16.20kg. The de-cat and sports cat front pipes have been enlarged to 3" bore and offer a weight saving of 0.60kg. The new systems benefit from all of the usual Cobra Sport refinements with mandrel bent, TIG welded, grade 304 stainless steel used throughout the systems as standard. You can therefore be assured of only the best quality in a Cobra Sport system. Matt Thomas, Sales Manager at Cobra Sport says "The new MK6 Polo has been a big hit with initial owners and journalists who rate the 1.8 TSI litre engine as a big improvement over the previous 1.4 TSI. We are very excited to have developed a full range of exhaust systems to offer an upgrade to suit the wide range of buyer requirements. The new Cobra Sport systems greatly improve the exhaust pitch and tone and add the sporty edge which was missing from the factory system. The resonated cat back system offers the subtlest upgrade offering an increase of 10db over the standard system in the 4,000 rpm static test. The resonated cat back exhaust upgrade is designed to provide a purposeful but unobtrusive pitch perfect sound quality which in no way interferes with day-to-day drivability". The styling of the system is finished off with a choice of twin 3" and 3.25" tailpipes in a highly polished T304 stainless steel finish. These options include a less obtrusive oval slash cut version which further compliments the VW Polo GTI aesthetics. Media Example of VW Polo GTI 1.8 sports exhaust (turbo back system - sports cat & resonated). Example of VW Polo GTI 1.8 sports exhaust (turbo back system - sports cat & resonated). Example of VW Polo GTI 1.8 sports exhaust (turbo back system - de-cat & non-resonated). Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.
£992.92 - £1,334.84
Cobra Sport Cobra Exhausts - VW Polo GTI (6C) 1.8 TSI (15-17) Cat Back Performance Exhaust
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI 1.8 TSI cat back performance exhaust is made in 2.5" / 63.5mm pipework and fits from the front pipe / catalyst backwards (Cat-back system) these exhausts replace the front box, centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This part is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Press Release The latest vehicle to pass through the Cobra Sport exhaust development process is the MK6 VW Polo GTI 1.8 TSI. Having previously achieved impressive results from the previous 1.4 Polo GTI we were keen to get the new 1.8 litre model in for development to create a new range of Cobra Sport performance exhausts. The larger 1.8 litre engine in the new Polo GTI produces 190bhp as standard matched with an impressive 236 lb-ft of torque giving the lightweight Polo impressive performance figures on paper whilst creating an exhilarating drive. The Cobra Sport team were able to reduce the weight of the exhaust system by an impressive 41% over the OEM system with the resonated 2.5" cat back system weighing in at only 9.52kg compared to the original 16.20kg. The de-cat and sports cat front pipes have been enlarged to 3" bore and offer a weight saving of 0.60kg. The new systems benefit from all of the usual Cobra Sport refinements with mandrel bent, TIG welded, grade 304 stainless steel used throughout the systems as standard. You can therefore be assured of only the best quality in a Cobra Sport system. Matt Thomas, Sales Manager at Cobra Sport says "The new MK6 Polo has been a big hit with initial owners and journalists who rate the 1.8 TSI litre engine as a big improvement over the previous 1.4 TSI. We are very excited to have developed a full range of exhaust systems to offer an upgrade to suit the wide range of buyer requirements. "The new Cobra Sport systems greatly improve the exhaust pitch and tone and add the sporty edge which was missing from the factory system. The resonated cat back system offers the subtlest upgrade offering an increase of 10db over the standard system in the 4,000 rpm static test. The resonated cat back exhaust upgrade is designed to provide a purposeful but unobtrusive pitch perfect sound quality which in no way interferes with day-to-day drivability." The styling of the system is finished off with a choice of twin 3" and 3.25" tailpipes in a highly polished T304 stainless steel finish. These options include a less obtrusive oval slash cut version which further compliments the VW Polo GTI aesthetics. Media Example of VW Polo GTI 1.8 sports exhaust (cat back - non-resonated). Interior exhaust example of VW Polo GTI 1.8 sports exhaust (cat back - non resonated). Example of VW Polo GTI 1.8 sports exhaust (cat back - non resonated) Example of VW Polo GTI 1.8 sports exhaust (cat back - non resonated) Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.
£486.00 - £562.12
Cobra Sport Cobra Exhausts - VW Polo GTI (6C) 1.8 TSI (15-17) Sports Cat / De-Cat Front Downpipe Performance Exhaust
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI 1.8 TSI performance exhaust is made in 3"/76.2mm pipework and fits from the turbo to the first box section and replaces the front pipe. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces factory emissions devices and is not EC homologated. This may not meet current emission laws for road use in your territory. Note: This product fits both Cobra Sport and O/E Cat Back exhausts. All relevant fittings and gaskets are supplied. (Except turbo gasket). Media Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.
£490.49 - £772.74
Cobra Sport Cobra Exhausts - VW Polo GTI (6R) 1.4 TSI (10-14) Cat-Back Performance Exhaust
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI performance exhaust is made in 2.5" / 63.5mm pipework and fits from the front pipe / catalyst backwards (Cat-back system) these exhausts replace the front box, centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This part is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. Please Note - This package includes a "Race Pipe" which removes the first standard box. All relevant fittings and gaskets are supplied. (Except turbo gasket). Press Release Cobra Sport's experienced engineers were able to design an exhaust upgrade which balanced the need for improved gas flow without sacrificing back pressure. The results speak for themselves and certainly boost the car's credentials. Our fully tuned version was given an inter cooler, induction kit and re-map, together with a Cobra Sport Turbo Back non-resonated exhaust upgrade with high-flow catalyst. On testing the Polo achieved a 50.3bhp increase in power taking it to 227.3bhp from its original 177bhp starting point. Similar increases were achieved with torque, which increased from 184lb-ft to a whopping 227.5lb-ft. Mass was reduced considerably providing a weight saving of almost 37% in comparison to its OE counterpart. All in all these are certainly impressive results for this little car. Styling options consist of standout twin 3" tailpipes in various designs, including the less obtrusive slash cut versions which compliments the VW aesthetics nicely. The exhaust upgrade provides a purposeful but unobtrusive sound quality which in no way interferes with day-to-day drivability. Engineering perfection is a given with all Cobra Sport exhausts, mandrel bends ensure an even curvature throughout and hand finishing of each individual system using advanced stainless steel TIG welding techniques providing assured quality in every exhaust. Media Example of VW Polo GTI sports exhaust (cat-back - non-resonated). Example of VW Polo GTI sports exhaust (turbo back system - non-resonated and sports cat). Example of VW Polo GTI sports exhaust (cat-back - non-resonated). Example of VW Polo GTI sports exhaust (turbo back system - non-resonated and sports cat). Example of VW Polo GTI sports exhaust (turbo back system - non-resonated and sports cat). Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.
£608.29 - £675.00
Cobra Sport Cobra Exhausts - VW Polo BlueGT (6C) 1.4 TSI (15-17) Cat Back Performance Exhaust
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo BlueGT 1.4 TSI cat back performance exhaust is made in 2.5in (63.5mm) pipework and fits from the catalyst backwards (Cat-back system). This exhausts replaces the centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This part is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Press Release The latest vehicle to pass through the Cobra Sport exhaust development process is the VW Polo BlueGT 1.4 TSI. Having previously achieved impressive results from the 1.4 and 1.8 Polo GTI, we were keen to get the sporty 1.4 BlueGT model in for development to expand our Polo range. The Cobra Sport team were able to reduce the weight of the exhaust system by an impressive 41% over the OEM system with the resonated 2.5in (63.5mm) bore cat back system weighing in at only 9.52kg compared to the original 16.20kg. The new systems benefit from all of the usual Cobra Sport refinements with mandrel bent, TIG welded, grade 304 stainless steel used throughout the systems as standard. You can therefore be assured of only the best quality in a Cobra Sport system. Matt Thomas, Sales Manager at Cobra Sport says "The new Cobra Sport systems greatly improve the exhaust pitch and tone and add the sporty edge which was missing from the factory system. The non resonated cat back system offers the biggest sound upgrade offering an increase of 7db over the standard system in the 3,800 rpm static test. We also offer a resonated cat back exhaust upgrade which has been designed to provide a purposeful but unobtrusive pitch perfect sound quality which in no way interferes with day-to-day drivability." The styling of the system is finished off with a choice of twin 3in/76.2mm and 3.25in/82.55mm tailpipes in a highly polished T304 stainless steel finish. These options include a less obtrusive oval slash cut version which further compliments the BlueGT aesthetics. Media VW Polo BlueGT 1.4 TSI Sounds Example (Non Resonated Cat Back Exhaust) Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.
£463.49 - £535.35
Cobra Sport Cobra Exhausts - VW Polo BlueGT (6R) 1.4 TSI (12-13) Cat Back Performance Exhaust
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo BlueGT 1.4 TSI cat back performance exhaust is made in 2.5in (63.5mm) pipework and fits from the catalyst backwards (Cat-back system). This exhausts replaces the centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This part is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Press Release The latest vehicle to pass through the Cobra Sport exhaust development process is the VW Polo BlueGT 1.4 TSI. Having previously achieved impressive results from the 1.4 and 1.8 Polo GTI, we were keen to get the sporty 1.4 BlueGT model in for development to expand our Polo range. The Cobra Sport team were able to reduce the weight of the exhaust system by an impressive 41% over the OEM system with the resonated 2.5in (63.5mm) bore cat back system weighing in at only 9.52kg compared to the original 16.20kg. The new systems benefit from all of the usual Cobra Sport refinements with mandrel bent, TIG welded, grade 304 stainless steel used throughout the systems as standard. You can therefore be assured of only the best quality in a Cobra Sport system. Media VW Polo BlueGT 1.4 TSI Sounds Example (Non Resonated Cat Back Exhaust) Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.
£463.49 - £535.35
Pro Props Pro Props Carbon Fibre Bonnet / Boot / Door Show Prop
Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)
£69.99
Enhanced Edition LED H7 Mini
Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£54.00£42.00
Enhanced Edition LED H8/11 Mini Fog Unit
Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£42.00
Wurth Wurth Brake Fluid - Dot4 500ml
For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water. DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11
£10.00
Enhanced Edition - VW Audi Group OEM Footwell Unit Upgrade (Ultra Bright)
Ultra bright footwell Unit upgrade for the Golf MK7 - Now as a FULL REPLACEMENT UNIT! We’ve implemented our Enhanced Edition technology into an ultra bright footwell upgrade for this VW Legend Please note for these to fit your vehicle must already have footwell lights installed, as these are a direct replacement for Factory footwell units upto 36X brighter than a standard footwell light and available in 3 colours The unit features 18 Ultra bright SMD chips (Which each chip is 2x brighter than oem) and is placed inside a fully replacement unit designed to disperse the light effectivly and efficiently, to give you an ultra bright footwell WITHOUT impeding visibility when driving! Confirmed Fitment: VW Caddy 2004-2012 VW EOS 2006 > VW Golf MK5 VW Golf MK6 VW Golf MK7 VW Jetta MK5 VW Passat B6 VW Polo MK5 VW Tiguan MK1 Skoda Superb MK2 MAY FIT OTHER VAG GROUP MODELS - PLEASE ENQUIRE VIA EMAIL May also fit in other areas of the car such as Boot & Glove Box on some models. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.
£18.00
Airtec AIRTEC SEAT SPORT STYLE INTERCOOLER UPGRADE ONLY IBIZA, FABIA, POLO
Airtec has released their Seat Spot Style Intercooler, reasonably priced but high quality alternative from cheap nasty Ebay kits & more than capable of doing the same if not better job than more expensive Intercoolers, we take a huge amount of pride in making sure our kits are finished to an Extremely high standard. Intercooler only – This intercooler will fit the following known applications (crash bar alterations maybe required to fit some models)Ibiza Mk4 1.9 130PD Diesel (full kit inc pipes coming soon!)Ibiza Mk4 1.8 Turbo (full kit inc pipes coming soon!)Skoda Fabia VRS Diesel (full kit inc pipes coming soon!)Polo GTI 1.8 Turbo AIRTEC Front mount Intercooler Features 1 x huge 60mm core intercooler with flowed cast end tanks, this means less welding and a stronger intercooler Can be adapted to suit a number of VAG applications Unbeatable value for money Proven Power Increase’s for Fast Road & Track Available in Satin Black only Airtec 3 year unlimited mileage warranty Fitting will take 3-4 hours depending on mechanical skill Finished In Pro-Series Black only (not silver no more) In stock ready to ship, please note the intercooler does not come with any fitting kit (brackets) or pipework. Intercooler Volume Capacity (The amount of charged air that the intercooler can hold)AIRTEC: 3.45 litresApproximate Dimensions:Thickness – 60mmWidth – 525mmHeight – 378mmAIRTEC part number: ATINTVAG3
£358.58
POWERFLEX Powerflex ANTI-ROLL BAR LATERAL SUPPORT CLAMPS - 13-33mm
PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm
£48.54 - £4,853.52
forge Motorsport VW Polo 6R 1.4 GTi Brake Lines
Fits Polo (6R) 1.4 GTi Models: 2010 - 2017 4 Line set Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal feel – firmer under pressure More efficient braking- the PTFE lined, Stainless steel will not expand under load unlike OEM rubber hoses Long Lasting- PVC outer and Stainless-Steel end fittings will outlast the standard Mild Steel and rubber lines many times Available in many outer colour options to compliment your vehicle Rigorously tested and approved to the FMVSS 106 certification standards
£122.39
Enhanced Edition LED H1
Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white, Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£33.00
Enhanced Edition LED H8/11 Fog Unit V3
Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£54.00£45.00
Enhanced Edition LED H7 - Version 3
Description Here we introduce to you our #Enhanced Edition H7 LED V3 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these. Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£45.00 - £72.50
IllumiNite H11 Fog / Cornering Bulbs
Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.
£15.60£13.00
VW Polo MK5 6R/6C - LED Sequential Side Repeater Unit
The All new Enhanced Edition sequential indicator unit from CEUK for the Polo MK5 6r/6c A fine complement for our LED front and rear indicator offerings Simple plug and play unit, installed by simply removing the OEM bulb and lense and replacing with our full replacement Unit! Amber sequential strobing that is completely canbus friendly! Once your indicator ignites, the led strip built into the housing strobes from left to right giving a sequential look to it! Superior quality to overseas counterparts E Marked Fitment: 2009-2014 - Polo MK5 6R 2014-2017 - Polo MK5 6C Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.
£40.00 - £41.00
Universal Engine Bay Dress Up Kit (M6 Fitment)
Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically:- Your screws will never rust- You can select any colour you want!- It looks the bomb! This kit is for a Universal set of screws and washers in M6 fitment PLEASE ENSURE YOUR SCREWS ARE M6 BEFORE ORDERING! Contents: 10x Washer - 10x Stainless Steel Screw (M6)Locations: Headlights, Headlight Cover, Slam Panel etc You've seen these on eBay for £7, So why buy from us you ask...Well, The ones on eBay come with Cheaply made screws and washers, Our washers are made from a premium grade aluminium and anodized to last, and all our bolts are made from stainless steel!Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!
£13.00
Racingline RacingLine High-Output Ignition Coil Pack - MQB Style (Sold Individually)
Higher Output Ignition Coils.for all VW Group 2.0 TSI engines and bigger. RacingLine's Higher Output Ignition Coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils. What dothey do? The RacingLine Higher Output Ignition Coils are a direct plug-and-play upgrade from your OE ignition coils. Whether your engine is standard or Stage 3 tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of RacingLine Coil Packs. The RacingLine Higher Output Ignition Coils deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximise output from either their stock or modified car Why have we settled on a 10% gain in output energy for our Coil Packs? Because this is the optimum increase level for VWG's TSI engines. Beyond this, no additional benefit is gained, yet the coil's internal temperatures begin to rise sharply. So, at this level, our Coil Packs can maintain coil voltage under load with little or no drop-off, performing consistently from idle through to the shift point or red-line Replacement is all the more worthwhile on older engines still running the OE Coil Packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE Coil Packs age and gradually break down. Fitment couldn't be easier. These are a simple plug and play replacement. Remove the OE Coil Packs, replace with our Higher Output versions. Three Colour choices: 'R' BLUE VWR900000 GTI RED VWR900001 NARDO GREY VWR900002 Sold individually - remember to order sets of four, five, six or eight as required. Confirmed applications VWR900000 – BLUE I VWR900001 – RED I VWR900002 – GREY All vehicles fitted with the following engines: 1.8 TSI : EA888.3 2.0 TSI : EA888.3 & 3B 2.0 TSI : EA888.4 2.5 TFSI : EA855 EVO 3.0 V6 TFSI : EA839 2.9 V6 TFSI : EA839 4.0 V8 TFSI : EA825 Sold individually. Most popular models with these engines include: > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 6 AW 2017+ > Audi S1 2.0 TFSI 2015-2018 > Audi A1 GB 2019+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C8 2018+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C8 4K8 2018+ > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi A8 / S8 D5 2017+ > Audi A8 / S8 D4 2010-2017 > Audi Q8 4M8 50 TDI & 45 TDI 2018+ > Audi Q8 / SQ8 / RSQ8 4M8 2018+ > Audi Q7 / SQ7 4M 2016-2019 > Audi R8 2015+ > SEAT Ibiza Cupra 1.8TSI 6J 2017-2018 > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq 2018+ > Porsche Panamera 970 2010-2017 > Porsche Macan 2014+ > Porsche Cayenne 2019+ > Lamborghini Urus 2018-2021 > Bentley Bentayga 2016-2021
£41.99
Enhanced Edition LED H7 - Version 2
Description Here we introduce to you our #Enhanced Edition H7 LED V2 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these. These are sold separately. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£53.99£44.99