Performance - VW Polo MK6 (AW) 2017-Present)
RamAir RamAir Performance Induction Kit - VAG Group 1.0 MPI / 1.5 TSi/TFSi Engines
This performance intake kit is designed to fit the Volkswagen, Audi, Seat and Skoda with 1.5 / 1.0 TSI engines Features Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Mounts to standard factory mounting points and rubbers Easy to clean using our filter maintance kit - CK-003 What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Ramair foam filter Black silicone intake pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2017-2021 Skoda Octavia (MK3) 1.5 TSI 2018-2021 Audi Q2 (GA) 1.5 TSI 2018-2021 Audi A1 (GB) 1.5 TSI 2018-2021 Audi Q3 (F3) 1.5 TSI 2018-2021 Seat Arona (KJ) 1.5 TSI 2018-2021 Seat Ateca (KH) 1.5 TSI 2018-2021 Seat Leon (MK3) 1.5 TSI 2020-2025 Seat Leon (MK4) 1.5 TSI 2018-2021 Seat Tarraco (KN2) 1.5 TSI 2018-2021 Seat Ibiza (6F) 1.0 MPI 2018-2021 Seat Ibiza (6F) 1.5 TSI 2017-2021 Skoda Kamiq (NW) 1.5 TSI 2017-2021 Skoda Karoq (NU7/ND7) 1.5 TSI 2017-2021 Skoda Scala (NW) 1.5 TSI 2017-2021 Skoda Kodiaq (NS) 1.5 TSI 2017-2021 Skoda Superb (MK3) 1.5 TSI 2017-2021 VW Arteon (3H) 1.5 TSI 2020-2025 VW Golf (MK8) 1.5 eTSI 2020-2025 VW Golf (MK8) 1.5 TSI 2020-2021 VW T-Cross (MK1) 1.5 TSI 2017-2021 VW T-Roc (MK1) 1.5 TSI 2017-2021 VW Golf (MK7) 1.5 TSI 2017-2021 VW Touran (MK2) 1.5 TSI 2017-2021 VW Tiguan (AD/BW) 1.5 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 1.5 TSI 2017-2021 VW Polo (AW) 1.0 MPI 2017-2021 VW Polo (AW) 1.5 TSI 2017-2021 VW Passat (3G) 1.5 TSI 2017-2021 Audi A3 (8V) 1.5 TFSI 2017-2021 Audi A3 (8V) 1.5 TSI 2020-2021 Audi A3 (8Y) 1.5 TSI 2020-2023 VW Caddy (MK4) 1.5 TFSI 2020-2023 VW Caddy (MK5) 1.5 TFSI
£174.87 - £235.77
Scorpion Scorpion Exhaust - Polo MK6 (AW) GTI (PRE FACELIFT & FACELIFT) - Resonator Delete Pipe
Scorpion Exhaust - Polo MK6 GTI - Original Centre Silencer Delete Pipe None resonated Contents: OE Res Delete Pipe Fitting Kit Good to know: Fitment Years: 2019 - 2024 Model: Polo GTI AW Fits To: OEM / Scorpion Pipe Diameter: 63.5mm / 2.5" From their beginnings in the 1930’s and now part of the VAG group Volkswagen have grown to be one of the world’s largest car manufacturers. Initially focusing on affordable family cars including the iconic Beetle all that changed in 1976 with the launch of the Golf/Rabbit Mk1 Gti one of the first hot hatches and a real game changer. Following on from the Gti’s immense success the early 2000’s saw the launch of the first of their high-performance R models the Golf 4 R32. It was only natural that one of the very first performance exhausts Scorpion produced was for the Gti back in the early nineties and they’ve continued to be one of our most popular models to date. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.
£70.00£63.00
Scorpion Scorpion Exhaust - Polo MK6 (AW) GTI (PRE FACELIFT & FACELIFT) - GPF Back Exhaust (Multiple Options)
Scorpion Exhaust - Polo MK6 GTI - GPF Back Exhaust None resonated, Supplied with Twin 90mm Tips in either Polished or Ceramic Black Contents: Centre Section Rear link pipe Rear Silencer Fitting Kit Good to know: Fitment Years: 2019 - 2025 Model: Polo GTI AW Fits To: OEM / Scorpion Pipe Diameter: 76mm/3" From their beginnings in the 1930’s and now part of the VAG group Volkswagen have grown to be one of the world’s largest car manufacturers. Initially focusing on affordable family cars including the iconic Beetle all that changed in 1976 with the launch of the Golf/Rabbit Mk1 Gti one of the first hot hatches and a real game changer. Following on from the Gti’s immense success the early 2000’s saw the launch of the first of their high-performance R models the Golf 4 R32. It was only natural that one of the very first performance exhausts Scorpion produced was for the Gti back in the early nineties and they’ve continued to be one of our most popular models to date. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.
£613.30 - £662.00
Scorpion Scorpion Exhausts - Polo MK6 (AW) GTI 2.0T Pre-Facelift - Downpipe with Decat or Sports Cat
This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Scorpion Exhausts - MK6 Polo GTi - Downpipe with Decat or sports cat Replaces OEM Catalyst with Decat / Sports cat Downpipe - for off road use! Contents: Downpipe with Decat / Sports cat Front section Fitting Kit Good to know: Fitment Years: 2018 - 2021 Model: Polo GTI AW Fits To: OEM / Scorpion Pipe Diameter: 76mm/3" From their beginnings in the 1930’s and now part of the VAG group Volkswagen have grown to be one of the world’s largest car manufacturers. Initially focusing on affordable family cars including the iconic Beetle all that changed in 1976 with the launch of the Golf/Rabbit Mk1 Gti one of the first hot hatches and a real game changer. Following on from the Gti’s immense success the early 2000’s saw the launch of the first of their high-performance R models the Golf 4 R32. It was only natural that one of the very first performance exhausts Scorpion produced was for the Gti back in the early nineties and they’ve continued to be one of our most popular models to date. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SVWCS045 Product Type Turbo-Downpipe Resonated Non-resonated Fitment Years 2010 - 2015 Fits To OEM / Scorpion Model Fitment 1.4 Tsi Pipe Diameter 70mm/2.75" * Shipping Dimensions 90cm x 78cm x 26cm Notes Engine management light may be activated, Stage 2 ECU remap recommended Closed Circuit Product Yes
£359.49 - £651.50
Airtec AIRTEC Motorsport Torque Mount for VW Polo GTI (AW)
As part of our expanding VW product range, AIRTEC Motorsport is proud to launch our uprated torque mount for the Polo GTI AW model. Upgrading the original torque mount reduces engine movement and wheel hop during hard acceleration, which allows for faster gear changes and a feeling of improved response. Finished in anodised black, the heavy-duty mount is machined from billet aluminium and is offered with purple bush inserts, aimed at fast road and track use. Fitting takes just 30 minutes and it is supplied with detailed installation instructions. Features: CNC-machined from solid billet aluminium, bead blasted and anodised black Purple polyurethane bush inserts for fast road and track use Reduces engine movement and wheel hop on hard acceleration Direct replacement for original cast aluminium and soft rubber torque mount Faster gear changes and feeling of improved response Can be fitted in under 30 minutes with no special tools required Please note: Uprating the torque mount to a stiffer bushing will increase noise and vibration within the cabin. Registered Design Right number: Application Pending AIRTEC part no: ATMSVAG21
£189.95
Airtec Pro Hoses Replacement Boost Hoses for Polo GTI (AW)
As part of our growing range of VW products, Pro Hoses are proud to offer this four-piece boost hose kit for the Polo GTI 2.0 TSi AW model. No extra modifications required, a direct replacement of all four OEM hoses to fit with original intercooler or AIRTEC Motorsport intercooler upgrade. Finished in gloss black only, these high-quality silicone Pro Hoses come complete with jubilee clips. Part No: PH/BOSVAG4
£189.00
Airtec AIRTEC Motorsport Breather Catch Can for VW Polo GTI (AW)
As part of our expanding VW product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Polo GTI AW model. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Polo GTI AW model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the VW Polo GTI AW Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High-quality powder-coated black finish Pro Hoses silicone hoses Includes all fixtures and fittings Features detailed fitting guide Registered Design Right number: Application Pending AIRTEC part no: ATMSVAG19
£369.00
Milltek Sport Milltek Sport - Downpipe with Decat Or Sports Cat (Res or None Res) - VW Polo MK6 (AW) GTi (With GPF)
This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Key facts Pipe Ø: 2.76" (70.00mm) Barcode (GTIN): Fitting takes from 2.50 to 3.50 hours Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis) Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.
£526.26 - £954.20
RamAir Ramair Performance Intake Kit for the 1.0 TSI VAG Models
This performance intake kit is designed to fit the VW 1.0 TSI platform. For full compatibility please check list below. Features Easy to maintain with our filter maintenance kit – CK-003 Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Proram pleated filter Black powder coated aluminium intake pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2015-2018 Audi A1 (8X) 1.0 TFSI 2016-2020 Audi A3 (8V) 1.0 TFSI 2017-2025 Seat Arona (KJ) 1.0 TSI 2016-2025 Seat Ateca (KH) 1.0 TSI 2015-2020 VW Caddy (MK4) 1.0 TSI 2014-2022 Skoda Fabia (MK3) 1.0 TSI 2015-2020 VW Golf (MK7) 1.0 TSI 2019-2025 Skoda Kamiq (NW) 1.0 TSI 2017-2025 Skoda Karoq (NU7/ND7) 1.0 TSI 2015-2020 Seat Leon (MK3) 1.0 TSI 2016-2020 Skoda Octavia (MK3) 1.0 TSI 2017-2025 VW Polo (AW) 1.0 TSI 2017-2019 Skoda Rapid (NH) 1.0 TSI 2016-2020 Audi Q2 (GA) 1.0 TFSI 2019-2025 Skoda Scala (NW) 1.0 TSI 2018-2025 VW T-Cross (MK1) 1.0 TSI 2019-2025 VW T-Roc (MK1) 1.0 TSI 2017-2019 Seat Toledo (MK4) 1.0 TSI 2015-2017 Seat Ibiza (MK4) 1.0 TSI 2018-2025 Seat Ibiza (MK5) 1.0 TSI
£237.45 - £246.96
PlexiClick® - Invisible Number Plate Holder Clip
This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily
£10.00
Cobra Sport Cobra Exhausts - VW Polo GTI (AW) Mk6 2.0 TSI (17>) GPF Back Performance Exhaust
Fits: Polo GTi (Mk6) models with the GPF Filter. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI (Mk6) performance exhaust is made in 3"/76.2mm pipework and fits from the Gasoline Particulate Filter section backwards (GPF-back), this exhausts replace the centre and rear sections. This exhaust offers improvement in terms of exhaust tone, bass and sound level whilst keeping the stock catalyst and GPF in place. This exhaust system has been designed to be easily upgradable to a full turbo-back exhaust in the future by purchasing additional sections. This exhaust has a choice of 4 tailpipe options including a 4" (101.6mm) carbon fibre tip. GPF-Back (with Rear Box) Test Results: Sound - Engine at Idle: 72.3dB (+10dB) - Static 3,800rpm test: 86dB (+7.5dB) All relevant fittings and gaskets are supplied. Press Release The latest variant of VW's Polo GTI was launched in 2018, based on the latest Mk6 (AW) shape Polo. It sports the same basic engine as VW's own Golf GTI, an EA888 2.0 TSI, albeit in a different state of tune, boasting 197hp and 236lb ft. These punchy figures bring the Polo's 0-62MPH time down to 6.7 seconds (when equipped with the optional Performance Package), a mere 0.2 seconds off of it's Golf stable mate's 6.5 seconds. As with all of the latest performance vehicles, the sound of the car from the factory has been severely limited offering a lacklustre and uninspiring exhaust sound. Cobra Sport have been able to truly open up the character of the Polo GTI optimising the exhaust tone with elite performance exhaust systems that both work with and remove the PPF filter. Cobra Sport opted for 3" (76.2mm) stainless steel pipework which is larger than most on the market for the biggest upgrade in terms of performance, flow rate and sound levels. The free flowing nature of the Cobra Sport exhaust setup will maximise future tuning possibilities of the Polo GTI. Media Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video.
£642.00 - £842.22
Cobra Sport Cobra Exhausts - VW Polo GTI (AW) Mk6 2.0 TSI (17>) Rear Box Delete Race GPF Back Performance Exhaust
Fits: Polo GTi (Mk6) models with the GPF Filter. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI Mk6 performance exhausts is made in 3"/76.2mm pipework and fits from the Gasoline Particulate Filter section backwards (GPF-back), this exhausts replace the centre and rear sections. This exhaust removes the standard rear box for the ultimate improvement in terms of exhaust tone and sound level whilst keeping the stock catalyst and GPF in place. All relevant fittings and gaskets are supplied. This exhaust system has been designed to be easily upgradable to a full turbo-back exhaust in the future by purchasing additional sections. This exhaust has a choice of 4 tailpipe options including a 4" (101.6mm) carbon fibre tip. GPF-Back (Box Delete) Test Results: Sound - Engine at Idle: 74dB (+11.7dB) - Static 3,800rpm test: 90.7dB (+12.2dB) Press Release The latest variant of VW's Polo GTI was launched in 2018, based on the latest Mk6 (AW) shape Polo. It sports the same basic engine as VW's own Golf GTI, an EA888 2.0 TSI, albeit in a different state of tune, boasting 197hp and 236lb ft. These punchy figures bring the Polo's 0-62MPH time down to 6.7 seconds (when equipped with the optional Performance Package), a mere 0.2 seconds off of it's Golf stable mate's 6.5 seconds. As with all of the latest performance vehicles, the sound of the car from the factory has been severely limited offering a lacklustre and uninspiring exhaust sound. Cobra Sport have been able to truly open up the character of the Polo GTI optimising the exhaust tone with elite performance exhaust systems that both work with and remove the PPF filter. Cobra Sport opted for 3" (76.2mm) stainless steel pipework which is larger than most on the market for the biggest upgrade in terms of performance, flow rate and sound levels. The free flowing nature of the Cobra Sport exhaust setup will maximise future tuning possibilities of the Polo GTI. Media VW Polo GTI GPF-Back Venom Exhaust (Rear Box Delete) VW Polo GTI GPF-Back Venom Exhaust (Promotional Video) Example of VW Polo GTI GPF-Back Venom Exhaust (Rear Box Delete) Cobra Sport Exhausts VW promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video.
£599.99 - £771.60
Cobra Sport Cobra Exhausts - VW Polo GTI (AW) Mk6 2.0 TSI (19>) Sports Cat / De-Cat Front Downpipe (incl PPF delete) Performance Exhaust
Fits GPF models only. Sports Cat option includes 4.5" (114.3mm) 200 cell high flow sports catalyst. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Mk6 VW Polo GTI performance exhaust is made in 3"/76.2mm bore pipework and fits from the turbo to the centre section replacing the standard downpipe and GPF filter. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces factory emissions devices and is not EC homologated. This may not meet current emission laws for road use in your territory. Fitment will require ECU update at time of fitment to cancel the EML light. Remap recommended to update for the increased flow rates and maximise performance. Fitment is for motorsport and off road use only as this system removes the GPF filter. All relevant fittings and gaskets are supplied for fitment (except turbo gasket). Press Release The latest variant of VW's Polo GTI was launched in 2018, based on the latest Mk6 (AW) shape Polo. It sports the same basic engine as VW's own Golf GTI, an EA888 2.0 TSI, albeit in a different state of tune, boasting 197hp and 236lb ft. These punchy figures bring the Polo's 0-62MPH time down to 6.7 seconds (when equipped with the optional Performance Package), a mere 0.2 seconds off of its Golf stable mate's 6.5 seconds. As with all of the latest performance vehicles, the sound of the car from the factory has been severely limited offering a lacklustre and uninspiring exhaust sound. Cobra Sport have been able to truly open up the character of the Polo GTI optimising the exhaust tone with elite performance exhaust systems that both work with and remove the PPF filter. Cobra Sport opted for 3" (76.2mm) stainless steel pipework which is larger than most on the market for the biggest upgrade in terms of performance, flow rate and sound levels. The free flowing nature of the Cobra Sport exhaust setup will maximise future tuning possibilities of the Polo GTI. Media Cobra Sport Exhausts VW promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video.
£499.99 - £781.09
Cobra Sport Cobra Exhausts - VW Polo GTI (AW) Mk6 2.0 TSI (19>) Turbo Back Performance Exhaust
Requires mandatory ECU reflash. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI Mk6 turbo back performance exhaust is made in 3"/76.2mm pipework and fits from the Turbo backwards (turbo-back) replacing the Downpipe, GPF, centre and rear sections. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces factory emissions devices and is not EC homologated. This may not meet current emission laws for road use in your territory. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. Fitment will require ECU update at time of fitment to cancel the EML light. Remap recommended to update for the increased flow rates and maximise performance. Fitment is for motorsport and off road use only as this system removes the GPF filter. All relevant fittings and gaskets are supplied (except turbo gasket). Press Release The latest variant of VW's Polo GTI was launched in 2018, based on the latest Mk6 (AW) shape Polo. It sports the same basic engine as VW's own Golf GTI, an EA888 2.0 TSI, albeit in a different state of tune, boasting 197hp and 236lb ft. These punchy figures bring the Polo's 0-62MPH time down to 6.7 seconds (when equipped with the optional Performance Package), a mere 0.2 seconds off of its Golf stable mate's 6.5 seconds. As with all of the latest performance vehicles, the sound of the car from the factory has been severely limited offering a lacklustre and uninspiring exhaust sound. Cobra Sport have been able to truly open up the character of the Polo GTI optimising the exhaust tone with elite performance exhaust systems that both work with and remove the PPF filter. Cobra Sport opted for 3" (76.2mm) stainless steel pipework which is larger than most on the market for the biggest upgrade in terms of performance, flow rate and sound levels. The free flowing nature of the Cobra Sport exhaust setup will maximise future tuning possibilities of the Polo GTI. Media Cobra Sport Exhausts VW promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video.
£1,088.32 - £1,581.80
Cobra Sport Cobra Exhausts - VW Polo GTI (AW) Mk6 2.0 TSI (19>) Venom Turbo Back Performance Exhaust
This product is designed without a rear box and will be loud, requires mandatory ECU reflash. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI Mk6 turbo back performance exhaust is made in 3"/76.2mm pipework and fits from the Turbo backwards (turbo-back) replacing the Downpipe, GPF, centre and rear sections. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces factory emissions devices and is not EC homologated. This may not meet current emission laws for road use in your territory. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. Fitment will require ECU update at time of fitment to cancel the EML light. Remap recommended to update for the increased flow rates and maximise performance. Fitment is for motorsport and off road use only as this system removes the GPF filter. All relevant fittings and gaskets are supplied (except turbo gasket). Press Release The latest variant of VW's Polo GTI was launched in 2018, based on the latest Mk6 (AW) shape Polo. It sports the same basic engine as VW's own Golf GTI, an EA888 2.0 TSI, albeit in a different state of tune, boasting 197hp and 236lb ft. These punchy figures bring the Polo's 0-62MPH time down to 6.7 seconds (when equipped with the optional Performance Package), a mere 0.2 seconds off of its Golf stable mate's 6.5 seconds. As with all of the latest performance vehicles, the sound of the car from the factory has been severely limited offering a lacklustre and uninspiring exhaust sound. Cobra Sport have been able to truly open up the character of the Polo GTI optimising the exhaust tone with elite performance exhaust systems that both work with and remove the PPF filter. Cobra Sport opted for 3" (76.2mm) stainless steel pipework which is larger than most on the market for the biggest upgrade in terms of performance, flow rate and sound levels. The free flowing nature of the Cobra Sport exhaust setup will maximise future tuning possibilities of the Polo GTI. Media Cobra Sport Exhausts VW promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video.
£1,032.68 - £1,499.62
Cobra Sport Cobra Exhausts - VW Polo GTI (AW) Mk6 2.0 TSI (17-18 Pre-GPF Models) Cat Back Performance Exhaust
Fits: Pre-GPF Polo GTi (Mk6) (17-18 models). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI (Mk6) performance exhaust is made in 3"/76.2mm pipework and fits from the Catalyst section backwards (Cat Back), this exhaust replaces the centre and rear sections. This exhaust offers improvement in terms of exhaust tone, bass and sound level whilst keeping the stock catalyst in place. This exhaust has a choice of 4 tailpipe options including a 4" (101.6mm) carbon fibre tip. GPF-Back (with Rear Box) Test Results: Sound - Engine at Idle: 69.4dB - Static 4,000rpm test: 90.9dB All relevant fittings and gaskets are supplied. Press Release The latest variant of VW's Polo GTI was launched in 2018, based on the latest Mk6 (AW) shape Polo. It sports the same basic engine as VW's own Golf GTI, an EA888 2.0 TSI, albeit in a different state of tune, boasting 197hp and 236lb ft. These punchy figures bring the Polo's 0-62MPH time down to 6.7 seconds (when equipped with the optional Performance Package), a mere 0.2 seconds off of its Golf stable mate's 6.5 seconds. As with all of the latest performance vehicles, the sound of the car from the factory has been severely limited offering a lacklustre and uninspiring exhaust sound. Cobra Sport have been able to truly open up the character of the Polo GTI optimising the exhaust tone with elite performance exhaust systems that both work with and remove the PPF filter (fitment to early Pre-GPF models also available). Cobra Sport opted for 3" (76.2mm) stainless steel pipework which is larger than most on the market for the biggest upgrade in terms of performance, flow rate and sound levels. The free flowing nature of the Cobra Sport exhaust setup will maximise future tuning possibilities of the Polo GTI. Media Cobra Sport Exhausts VW promotional video. British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video.
£642.00 - £842.22
Cobra Sport Cobra Exhausts - VW Polo GTI (AW) Mk6 2.0 TSI (17-18 Pre-GPF Models) Venom Rear Box Delete Race Cat Back Performance Exhaust
Fits: Pre-GPF Polo GTi (Mk6) (17-18 models). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI Mk6 performance exhausts is made in 3"/76.2mm pipework and fits from the Catalyst section backwards (Cat Back), this exhaust replaces the centre and rear sections. This exhaust removes the standard rear box for the ultimate improvement in terms of exhaust tone and sound level whilst keeping the stock catalyst in place. All relevant fittings and gaskets are supplied. This exhaust has a choice of 4 tailpipe options including a 4" (101.6mm) carbon fibre tip. Press Release The latest variant of VW's Polo GTI was launched in 2018, based on the latest Mk6 (AW) shape Polo. It sports the same basic engine as VW's own Golf GTI, an EA888 2.0 TSI, albeit in a different state of tune, boasting 197hp and 236lb ft. These punchy figures bring the Polo's 0-62MPH time down to 6.7 seconds (when equipped with the optional Performance Package), a mere 0.2 seconds off of its Golf stable mate's 6.5 seconds. As with all of the latest performance vehicles, the sound of the car from the factory has been severely limited offering a lacklustre and uninspiring exhaust sound. Cobra Sport have been able to truly open up the character of the Polo GTI optimising the exhaust tone with elite performance exhaust systems that both work with and remove the GPF filter (fitment to early Pre-GPF models also available). Cobra Sport opted for 3" (76.2mm) stainless steel pipework which is larger than most on the market for the biggest upgrade in terms of performance, flow rate and sound levels. The free flowing nature of the Cobra Sport exhaust setup will maximise future tuning possibilities of the Polo GTI. Media VW Polo GTI GPF-Back Venom Exhaust (Rear Box Delete) (Note: GPF Equipped Car) VW Polo GTI GPF-Back Venom Exhaust (Promotional Video) Example of VW Polo GTI GPF-Back Venom Exhaust (Rear Box Delete) Cobra Sport Exhausts VW promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video.
£642.00 - £771.60
Maxton Design Maxton Design - Front Splitter V.5 VW Polo Mk6 GTI
Front Splitter V.5 VW Polo Mk6 GTI FITS ONLY:VW Polo Mk6 GTI (2017-2021) COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting Manual CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.
£94.00
Pro Props Pro Props Carbon Fibre Bonnet / Boot / Door Show Prop
Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)
£69.99
Enhanced Edition LED H7 Mini
Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£54.00£42.00
Scorpion Scorpion Exhausts - Exhaust Tunnel Brace - Audi/Cupra/Seat/Skoda/VW MQB Models
Want to tighten your grip on the road? Scorpion’s lightweight aluminium chassis braces tick all the boxes. The single-piece manufacturing process ensures a high-strength connection under load. Braces are powder-coated black and etched with the Scorpion mark.Our underbody bracing reduces performance loss due to chassis twist during hard braking or cornering. Enhanced body rigidity translates to a more direct feel with the road surface. (Fits both the Scorpion and OEM pipework.) FITS: AUDI RS3 8V Saloon/Sedan 17-18 Non-GPF Model RS3 8V Saloon/Sedan 19-20 GPF Model RS3 8V Sportback 15-17 PFL RS3 8V Sportback 17-18 Facelift Non-GPF Model RS3 8V Sportback 19-20 Facelift GPF Model S3 2.0T 8V (3 Door & Sportback) Facelift GPF Model S3 2.0T 8V (3 Door & Sportback) Facelift Non-GPF Model S3 2.0T 8V (3 Door & Sportback) PFL S3 2.0T 8V (Saloon) Facelift GPF Model S3 2.0T 8V (Saloon) Facelift Non-GPF Model S3 2.0T 8V (Saloon) PFL S3 2.0T 8Y Quattro (Saloon) GPF Model S3 2.0T 8Y Quattro (Saloon) ROW S3 2.0TFSi 8Y Quattro (Sportback) GPF Model S3 2.0TFSI 8Y Quattro (Sportback) ROW SQ2 19-24 TT MK3 2.0TFSi Quattro Non GPF Model TT RS MK3 GPF Model TT RS MK3 Non GPF Model TT S MK3 Coupe Non-GPF Model CUPRA Formentor 2.0 TSI 4Drive Leon 245 GPF Model Leon 245 ROW Ateca SEAT Leon Cupra 2.0 TSI 280, 290 & 300 Non GPF Model Leon Cupra 2.0 TSI 280/290 ST Leon Cupra 2.0 TSI 290 GPF Model Leon Cupra ST 300 4Drive (GPF Model) Leon Cupra ST 4Drive Carbon Edition SKODA Octavia vRS 2.0 Tsi VW MK7 Golf Estate R (pre facelift) MK7 Golf GTi (including Clubsport & Clubsport S) MK7 Golf R (pre facelift) MK7 GTD MK7.5 Golf Estate R (facelift) GPF Model MK7.5 Golf Estate R (facelift) Non GPF Model MK7.5 Golf GTi (Non-GPF Model) MK7.5 Golf GTi (TCR & GPF Models) MK7.5 Golf R (facelift) GPF Model MK7.5 Golf R (facelift) Non GPF Model MK8 Golf GTI Clubsport GPF Model MK8 Golf GTI Clubsport ROW MK8 Golf GTI GPF Model MK8 Golf GTI ROW MK8 Golf R GPF Model MK8 Golf R ROW Polo MK6 (AW) GTi
£85.00£76.50
Enhanced Edition LED H8/11 Mini Fog Unit
Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£42.00
Maxton Design Maxton Design - FRONT BUMPER WINGS (CANARDS) VOLKSWAGEN POLO GTI MK6 FACELIFT
Front Bumper Wings (Canards) Volkswagen Polo GTI Mk6 Facelift FITS ONLY:Volkswagen Polo GTI Mk6 Facelift (2021-)** Product made in a 3d printer. **** This prduct requires treatment before assembly (primer, varnish). ** COMPLETE SET CONTAINS: -> CANARDS Product is made from ABS plastic. Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.
£89.00
Wurth Wurth Brake Fluid - Dot4 500ml
For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water. DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11
£10.00