Performance - VW T-Roc MK1 (A1) 2017-Present

Racingline Performance Silicone Boost Hose Set EA888 Gen4The RacingLine Gen.4 Boost Hose package is a three-piece kit to replace the factory soft flexible rubber hoses and replace them with our beautiful reinforced silicone replacement versions. The kit is a direct OEM replacement: simply remove the factory hoses, and replace them with the three uprated silicone pipes. Simple.Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus other non-stepped designs.Of course the RacingLine hoses are pressure tested far beyond the turbo’s capabilities, allowing the system to maintain performance under extreme temperature and high-boost conditions. By minimising these restrictions, the smoother airflow and optimised hose routing ensures that the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence.Within the kit, the two Intercooler Boost Hoses have unique steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.A great upgrade for any remapped 2.0 TSI EA888 gen.4 car running higher boost than standard. Compatible with the following Vehicles:  > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Arteon R 2.0 TSI 320ps 2020+> VW T-Roc R 2.0 TSI 2021+> Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi TT 45 TFSI 2.0 TSI 8S 2021+> Audi SQ2 2.0 TSI EA888.4 2021+> Cupra Leon IV 300 TSI FW 2020+> Cupra Leon IV 245 TSI FW 2020+> Cupra Ateca 300PS EA888.4 2021+> Cupra Formentor 310PS 2020+> Cupra Formentor 245PS 2020+> Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Superb III 3V 2.0 TSI EA888.4 2020+> Skoda Kodiaq vRS 2.0 TSI EA888.4 2021+

Read more less

Upgraded Boost Pipe Kit.For all VWG MQB 2.0 TSI EA888 gen.4for higher output 300/310/320/333PS Continental TurboVWR140013 The RacingLine Boost Pipe Kit for 2.0 TSI MQB 'Evo' gen.4 (Continental turbo) delivers smooth, uninterrupted airflow to increase power and torque, replacing the restrictive, failure-prone factory boost pipes.For Golf mk8 R, GTI CS, Audi S3, Cupra Leon & Formentor & many more. This 3-piece RacingLine GEN.4 Boost Pipe kit for 2.0TSI EA888.4 high-output Continental turbo MQB 'Evo' cars deliver smooth, uninterrupted airflow to increase power and torque, replacing the restrictive failure-prone factory boost pipes. By promoting increased airflow throughout the charge flow path, along with removing boost-leak weak points, performance and reliability gains are guaranteed! The RacingLine Boost Pipe kit for 2.0 TSI gen.4 MQB "evo' delivers smooth, uninterrupted airflow to increase power and torque, replacing the restrictive, failure-prone factory boost pipes on all EA888 gen.4 higher output Continental turbo cars. The 3-piece Boost Pipe kit replaces the factory pipework between the turbocharger, the intercooler, and the throttle body with one-piece, mandrel-bent 6000 series aluminium tubes with thin wall 60mm OD for maximum smooth air flow. It’s by minimising the restrictions of the factory pipes and optimising the routing that this increased airflow is achieved. As well as giving enhanced turbocharger sound and faster spool, fitment of these Boost Pipes ensures that the turbo meets less resistance thus allowing it to perform more effectively - moving a larger volume of air and minimising turbulence. The RacingLine Boost Pipe Kit comprises three separate pieces. Two mandrel-bent hard-pipes for the turbo-intercooler and intercooler-throttle body chargepath, plus a reinforced turbo outlet Silicone Hose for the turbo outlet. The Boost Pipes themselves are formed from single piece, mandrel-bent 6000 series aluminium tube with thin wall 60mm OD. The silicone hose is hand-wound multi-ply over internal wire reinforcement, ensuring resistance to both heat and deformation. Meanwhile, barbed ends on the pipes ensure no risk of blow off, even under extreme boost pressure conditions. As you’d expect from RacingLine, each pipe is hand polished then anodised black with laser etched logos as the finishing touch - to look great in your engine bay, and stay looking great. As with all RacingLine products, perfect fitment is a priority. So, all the mounting brackets are carefully TIG welded to ensure dimensional perfection. And within each kit, RacingLine include a stainless steel Mikalor-brand clamp, OEM rubber mounting bobbins and new bolts to make sure you achieve the perfect installation. Install is direct OEM-replacement and requires no additional drilling or cutting to fit - meaning install is fully reversible. Finally, the Boost Pipes can be used with either factory rubber hoses or, for best results we'd highly recommend pairing them with the RacingLine Gen.4 Boost Hose Kit (VWR140006) APPLICATIONS:2.0 TSI / EA888 Gen.4 enginesContinental Turbo 300-333PSVWR140013 > VW Golf 8 & 8.5 R 2020+> VW Golf 8 & 8.5 GTI Clubsport 2020+> VW Arteon R 2.0 TSI 320ps 2020+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y & 8Y.2 2020+> Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+> Audi SQ2 (EA888.4) 2021+ > Cupra Leon 4 & 4.5 300 TSI FW 2020+> Cupra Ateca 300ps (EA888.4) 2021+> Cupra Formentor 310ps 2020+ > Skoda Superb III 3V 2.0 TSI (facelift EA888.4) 2021+  The RacingLine Boost Pipe Kit has three pieces: smooth aluminium mandrel-bent hard-pipes for the turbo-intercooler and intercooler-throttle body airflow, plus a reinforced turbo outlet Silicone Hose:      

Read more less

Upgraded Boost Hose Kit.For all VWG MQB 2.0 TSI EA888 gen.3 & 3B. Internally wired, stepped internals, reinforced silicone. The RacingLine Boost Hose Kit for 2.0 TSI MQB smooths airflow and optimises routing - for more effective performance in high boost, high temperature use.  What do they do? Welcome to the ultimate Boost Hose Kit for 2.0 & 1.8TSI MQB vehicles. The RacingLine Boost Hose package replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels.   By minimising restrictions, the smoother airflow and optimised routing ensures the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence  Direct OEM replacement: simply remove the old weak, flexible rubber hoses and replace them with our five-piece kit Pressure tested far beyond the turbo’s capabilities, the system maintains performance under extreme temperature and high-boost conditions  Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus non-stepped designs Five piece kit: The RacingLine Boost Hose Kit is probably the only one on the market which comes with five hoses included - however you'll only need to fit four of them.  ​ The choice of which Turbo Outlet Pipe (4a & 4b) depends on whether your car is pre- or post-2017. It's really easy to choose which to use, as it's either long or short depending on what OEM pipe you remove meaning that (unlike other kits) you can't really get this wrong! 1. INTERCOOLER INLET 2. INTERCOOLER OUTLET 3. THROTTLE BODY 4a. turbo outlet pre 2017 4b. turbo outlet after 2017 PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Constructed from internally-wired reinforced high quality silicone, guaranteeing great rigidity to prevent deformation under high boost or heat loads Fluorosilicone interior surface resists oil and gasoline permeation providing extra protection against deterioration  Stainless steel Mikalor-brand clamps reduce the risk of boost leaks with increased connection strength and decreased hose slippage Multi-ply silicone outer construction is hand-wound for performance under extreme conditions, ensuring both heat and burst resistance      INTERNALLY-WIRED INTERCOOLER HOSES Within the kit, our unique super-strength Intercooler Boost Hoses have steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.  CONFIRMED APPLICATIONS 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines ​ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

Leyo Motorsport proudly present you the best Silicone Turbo Boost Hose on the market today. Our Silicone Turbo Boost Hose comes in a set of four and is a direct replacement upgrade to the rubber factory hose.  As with all Leyo Motorsport product, these hoses are made with performance in mind and is designed with avoiding power draining boost leaks and optimising air flow. Made with 4 layers of durable silicone, it provides the much needed longevity the factory hose lacks. These Silicone Turbo Boost Hoses is fully compatible with factory intercooler or our Leyo Motorsport performance intercooler. For MQB EA888.3 4 layer silicone Optimizing air flow Upgrade to factory rubber hose

Read more less

A must have for R600 intakes, Racingline Underhose Our new R600 Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look. Includes a factory one-way valve incorporated, just like the original; don’t run your car without this valve! CONFIRMED APPLICATIONS VWR17 G7R600 FOR CARS WITH R600 FITTED > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Ateca 2.0 TSI 190hp 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ > Skoda Kodiaq 2018+ > Skoda Kodiaq 2.0 TSI 190hp 2018+

Read more less

For more efficient and cooler air flow, be sure to compliment your ride with Leyo Motorsport’s Turbo Charge Pipes. Leyo's in-house designed full aluminium tubing allows a less restricted path between your intercooler and turbocharger housing. When performing real time testing, leyo's research and developers found the OEM unit was not efficient in keeping intake air travelling smoothly all the way to the Manifold. This is where Leyo Motorsport turbo charge pipes comes in. Leyo use a heavy duty silicone hose and clamps to maintain optimal high boost flow for stage 1 to stage 3 setups in your performance vehicle with extra WMI Bung. The Leyo Motorsport turbo charge piping is larger than the OEM unit allowing for smoother performance when tuning on a dyno. Don’t let airflow be restricted, order your unique Leyo Motorsport turbo charge pipe kit today. Fitment:​- Stock Intercooler. 60mm I.D- Aftermarket uprated intercooler core with stock diameter connector 60mm I.D Improved air flow from the turbo all the way through. Removes OEM restrictions. Pipes made from heavy duty aluminium. Connectors made from heavy duty silicon. Perfect for Stock & Stage 1 through to 3 performance. 2 WMI Bung  10mm larger than OEM. 

Read more less

This kit comprises of four silicone hoses . These hoses will withstand greater temperatures and pressures compared with the OEM hoses and they look fantastic.   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* FITS: AudiA32.0 FSiTS32.0 TSI (8V Chassis)SQ22.0TSI (2018-2021)TTMk32.0 TSI 2015 OnwardsTTSMk3 8S (2014-2021)CupraAteca(up to 2020)SeatLeonMk3 2012-2020Cupra 280/290/300RSkodaOctaviaVRS 2.0 TSI 2013 OnwardsSuperb2.0TSI 220 BHP280 4x4 DSGVolkswagenArteon(2017-2020)2.0 TSIGolfMK71.8 TFSIGTIGTI Clubsport ED40RMK7.5GTI RJettaMK7 (2018-2021)2.0 GLIMK7.5 (2021-)2.0 GLIPassat2.0 FSiTT-Roc2.0 2018-2021Tiguan2.0 TSI 2017 Onwards   *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Designed as a direct replacement for the OEM plastic discharge pipe (Part No. 5Q0145840) used on 1.8T and 2.0T engines found in various VW, Audi, Seat and Skoda models. Full mandrel bent single piece hard pipe with larger bore size for increased flow. This ensures high amounts of air are discharged from the turbo charger and therefore releasing the full potential of your engines capabilities. Unlike the OEM discharge pipe that is prone to failure from increased boost or many heat cycles, the Forge Motorsport high flow discharge pipe will not crack or fail - ever. This is backed up by our no quibble Lifetime warranty. Supplied in black powder coated finish for that OEM look with a choice of hose colours red, blue, or black to complement the look of your engine bay. No modifications to original equipment are necessary to install this part. This part will fit:Audi A3, S3, TT, and TTSVW Arteon, Golf MK7 (GTI, R, 7.5*), and TouranSkoda Octavia and Superb.  In the box:Hard pipeSilicone HoseHose Clamps This will fit with the stock turbo muffler or with the Forge Motorsport Muffler Delete FMMD2 which will further enhance the benefits of this discharge pipe.# *NOT COMPATIBLE WITH 7-SPEED DSG MODELS   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less