Performance - VW T-Roc MK1 (A1) 2017-Present

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!

Read more less

High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!  

Read more less

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

 This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Includes GPF Delete  Requires Stage 2 ECU Software  FITS: Audi S3 2.0 TFSI quattro 3-Door 8V.2 (GPF Equipped Models Only) 2019 to 2020 Audi S3 2.0 TFSI quattro Sportback 8V.2 (GPF Equipped Models Only) 2019 to 2020 Audi S3 2.0 TFSI quattro Saloon & Cabrio 8V.2 (GPF Equipped Models Only) 2019 to 2020 Seat Ateca Cupra 300 4Drive (GPF/OPF Models Only - NON MQB EVO 4) - Inc Facelift Models 2019 and Later Seat Leon ST Cupra 300 (4x4) Estate / Station Wagon / Combi (OPF/GPF Equipped Only) 2019 to 2020 Volkswagen Arteon 2.0TSI 280PS 4Motion (OPF/GPF Vehicles Only) 2019 and Later Volkswagen Golf Mk7.5 R 2.0 TSI 300PS (GPF Equipped Models Only) - 76mm & EC Approved Systems 2019 to 2020 Volkswagen Golf Mk7.5 R Estate / Variant 2.0 TSI 300PS (GPF Equipped Models Only) 2019 to 2020 Volkswagen T-Roc R 2.0TSI 300ps (with OPF/GPF) 2019 to 2022 NOTES: Large-bore Downpipe and De-cat SSXVW510Includes GPF Delete - Must be fitted with OE cat-back system - Requires Stage 2 ECU Software Large-bore Downpipe and De-cat SSXVW511Includes GPF Delete Section - Fits only with Milltek Sport Cat Back System - Requires Stage 2 ECU Software Large Bore Downpipe and Hi-Flow Sports Cat SSXW512200 Cell HJS High Flow Sports Cat and includes GPF Delete Section - For Fitment with the Milltek Sport Cat Back Only and requires a Stage 2 ECU remap Large Bore Downpipe and Hi-Flow Sports Cat SSXVW513200 Cell HJS High Flow Sports Cat and includes GPF Delete Section - For Fitment with the OE Cat Back System Only and requires a Stage 2 ECU remap Large Bore Downpipe and Hi-Flow Sports Cat SSXVW515200 Cell Race High Flow Sports Cat and includes GPF Delete Section - For Fitment with the Milltek Sport Cat Back only and requires a Stage 2 ECU remap Large Bore Downpipe and Hi-Flow Sports Cat SSXVW514200 Cell Race High Flow Sports Cat and includes GPF Delete Section - For Fitment with the OE Cat Back System Only and requires a Stage 2 ECU remap Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Key facts Pipe Ø: 3.00" (76.20mm) Barcode (GTIN): Tip style: Quad 100mm GT100 Fitting takes approximately 0.00 hours FITS: Volkswagen T-Roc R 2.0TSI 300ps (with OPF/GPF) 2019 to 2022 Volkswagen T-Roc R 2.0TSI 300ps (MQB EVO Models with OPF/GPF) 2022 and Later From late 2018, many vehicles have been manufactured with a Gasoline/Otto Particulate Filter to reduce further the emissions from the vehicle. The Milltek Sport Particulate Filter-Back range is designed to compensate for the sound reducing qualities from the particulate filter and significantly improve the sound aesthetic of the exhaust system.All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.

Read more less

Racingline Billet Underbody Tunnel Braces Want to sharpen up your MQB handling responses? MQB Billet Underbody Tunnel Braces mount under the body to help fight body flex. This improves rigidity to help refine the handling, whilst also providing valuable extra clearance for larger diameter exhaust system. What do they do? MQB cars rely on thin stamped-steel OE tunnel braces underneath in an attempt to reinforce the body’s weaker points and limit chassis flex under demanding loads. Our new Billet Underbody Braces replace these weak braces with intricately machined aluminium replacements, greatly improving stiffness, giving much better exhaust clearance and even look great! CNC Machined from a solid billet of 6061-T6 Aluminium, each brace has been engineered to remove unnecessary material whilst still increasing rigidity. With any 3″ diameter exhaust system, the OE brace gives insufficient clearance. So rather than removing the tunnel brace, our new Rear Tunnel Brace at last gives you the option to replace it, giving you the clearance you need plus maintaining crucial body stiffness. Despite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The brace designs mean that installation is simple, using existing body mounting points with no drilling or trim removal required, ensuring fitment is completely reversible. We offer two braces – a Centre and a Rear Tunnel Brace. Owners of FWD cars can fit both, AWD cars can only fit the Rear Tunnel Brace. Looking to fit a larger bore Exhaust System? For large diameter aftermarket exhausts, there simply isn’t clearance space above the factory tunnel brace. Many owners have no choice but to remove the brace. But the brace is there for a reason. With the extra clearance our Rear Tunnel Brace gives, you can now maintain strength and fit your bigger exhaust. VWR810005 – Rear Tunnel BraceVWR810004 – Centre Tunnel Brace (Front-wheel drive only)

Read more less