Silicone Hoses

 7 piece silicone hose kit to replace the coolant hoses on a VAG 1.8T Golf/Leon/A3/TT The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   FITS: AudiA31.8TTTMk1150/180BHPSeatLeonMk1 1998-2005Cupra 1.8TVolkswagenBora (1998-2005)GolfMK4     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This hose fits directly to the turbo on the 1.8T 210 and 225 engines. It is made from high temperature resistant flourosilicone compound and nomex reinforced to withstand the high pressures that may be experienced on tuned engines. This is the perfect replacement for the OEM hose which has a history of premature failure. Available in Ocre colour only. Please be aware that these hoses were patterned from right hand drive vehicles.Whilst we believe these to be correct for left hand drive vehicles we suggest that you visually check their suitability, as replacement items, with those fitted to your own vehicle, before attempting installation. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   *T&C’s apply     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

FMKT024 – Audi RS3 (8V chassis), and Audi TTRS (8S) A set of four boost hoses and air box coupler hose for the Audi RS3 and Audi TTRS - Please note the airbox hose (centre of the kit image) does not fit the DNWA and DAZA engine codes. This hose kit includes the intercooler inlet and outlet hoses (two largest hoses seen in the kit image), throttle body hose located at feed into alloy inlet manifold elbow (straight reducer seen in the kit image), and turbo outlet hose (two smallest hoses in the kit image, one being an alternative for the facelift 8V models). The Forge silicone hoses in this kit are Fluorosilicone lined to prevent oil vapour penetration throughout the inner hose wall. Fluorosilicone lining also renders the kit suitable to be used with either modern long-life coolants or Organic Acid Technology coolants (O.A.T.). The use of a Fluorosilicone lining ensures that Forge silicone hoses are the clear market leader. This durable Forge Motorsport silicone hose kit has been designed to withstand pressures experienced in both tuned and remapped Audi RS3 and TTRS engines, long outlasting the original hoses. This high quality hose kit is covered by the limited lifetime Forge Motorsport warranty, keeping you on the road and ahead of the pack! This set of hoses is available in red, blue or black finish, an added aesthetic option for this high quality hose kit. *T&C's Apply     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A set of four silicone boost hoses for the Audi S1. Forge Motorsport design these hoses so they can withstand pressures that can be experienced on tuned and re-chipped engines. They will long outlast the original hoses and with our limited lifetime warranty on all Forge products, you can be sure these hoses won't let you down. This set of hoses are available in red, blue or black meaning you can find the perfect colour to match your car. Simply select your choice using the options above.  The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Audi S5 3.0TFSI Intake Hose Silicone intake hose for Audi S5 3.0TFSI this hose is a direct replacement for the OEM plastic corrugated intake pipe. This high quality, multi-ply reinforced silicone hose offers smoother internal profile to enhance flow and does away with the stock resonator.   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   *T&C’s apply       Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Two silicone boost hoses, turbo to intercooler and intercooler to intake manifold. These are available in a choice of colours and are made to withstand the greater pressures often found on tuned vehicles. These hoses will fit the 210 / 225 versions of the VAG 1.8T engine as found in the Audi TT, Seat Leon Cupra R and Audi S3. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

BMW 335 Diesel E90/91/92/93 replacement turbo outlet hose. A combination of heat, oil, and boost pressure at the turbo outlet expose the general weakness of the stock turbo outlet pipe, resulting in degradation of the stock hose wall and metal couplings. After suffering this hose failure (and the associated boost/power loss) customers are then faced with an expensive replacement, however poor quality, from BMW. The Forge Motorsport solution is a 4ply fluoro-lined silicone hose designed to withstand the typical temperature, pressure and oil corrosion at the turbo outlet juncture. CNC machined alloy couplers achieve a snug fit to complete another high quality Forge Motorsport product. Please note this kit is not supplied with the male coupler o-ring, and the original o-ring must be removed from the stock male coupler for fitment to the Forge Motorsport male coupler. If the o-ring needs to be replaced an original can be bought from BMW under part number 11618506786, or 11617791470. These two part number represent the original and superseded o-ring part number, both of which are same quality and size o-ring. PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES Please note: It is very important to fit this hose following the process described in the fitting guide. Failure to do so will result in the hose appearing too short for purpose.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A set of three silicone boost hoses complete with alloy couplers for the Vag 1.9 PD 150 diesel engine as fitted to the Seat Leon/ VwGolf Mk4/ Vw Bora   This will only fit up to 2001 models The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES *T&C’s apply   Please Note: In line with our policy to constan

Read more less

Uprated Silicone boost hose kit for the VW T5 1.9TDI 2003-2010 84bhp and 102bhp This kit comprises of four silicone hoses complete with CNC alloy couplers and the highest quality stainless steel clamps. These hoses will withstand greater temperatures and pressures compared with the OEM hoses and they look fantastic. Available in your choice of red, blue, or black.The hoses replace the two intercooler hoses, throttle body hose, and the turbo outlet hose.    The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* *T&C's Apply PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Uprated Silicone boost hose kit for the VW T5.1, 2.0TDI 84/102/114/140BHP The Forge Motorsport kit comprises of four silicone hoses complete with CNC alloy couplers and the highest quality stainless steel clamps. These hoses will withstand greater temperatures and pressures compared with the OEM hoses and they look fantastic. Available in your choice of red, blue, or black. The hoses replace the two intercooler hoses and throttle body hose,   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES *T&C's Apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A set of Silicone Turbo Hoses for the Mini/Clubman/Countryman Cooper S 2007 onwards (N18 engine). The standard hoses can be restrictive and more so with earlier models that contained a noise generator. Installed on the cold side, these free-flowing hoses improve turbo response throughout the rev range. The re-enforced silicone structure will withstand greater temperatures and pressures than the original hose and is ideal for tuned engines. Available in red, blue, or black. Please note this does not fit the N14 engine please see FMKTR56 FITS:  MiniCountryman 2010 - 2016Cooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18)Paceman 2012 - 2016Cooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18)Second generation (R55/R56/R57/R58/R59) (2006–2015)R55 ClubmanPre LCI 2007-2009 N14/N18 R56 HatchbackLCI 2010-2014Pre LCI 2007-2009 N14R57 ConvertibleLCI 2010-2014R58 CoupeLCI 2012-2015R59 RoadsterCooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18) The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description This kit comes as a set of four boost hoses for the Audi RS3 8Y with the DNWA engine codes. These include pre and post intercooler hoses, turbo outlet and throttle body elbow hose. The Forge silicone hoses in this kit are Fluorosilicone lined to prevent oil vapour penetration throughout the inner hose wall. Fluorosilicone lining also renders the kit suitable to be used with either modern long-life coolants, or Organic Acid Technology coolants (O.A.T.). The use of a Fluorosilicone lining ensures that Forge silicone hoses are the clear market leader. This durable Forge Motorsport silicone hose kit has been designed to withstand pressures experienced in both tuned and remapped Audi RS3 engines. This hose kit is covered by the Limited Lifetime Forge Motorsport Warranty, keeping you on the road and ahead of the pack!   This set of hoses is available in a black finish for that OEM look.      

Read more less

A set of four silicone boost hoses for the VW T5 van fitted with the 2500cc 130PS engine (BNZ code) and the 174PS engine (BPC code). These are supplied with alloy bayonet style couplers for ease of installation.Please note: It is necessary to re-use your original bayonet sealing rings, as these are not supplied.Please check your engine code. These are not suitable for early 2500cc engines 130PS with engine code AXD, or the 174PS engine with code AXE. For these engine codes, please see FMKTT5   Some engines need this extra bayonet coupler You can tell by looking at the hose that goes directly onto the turbo if it has a long coupler you do NOT need to purchase this extra coupler.   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES *T&C’s apply       Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Replacement reinforced silicone breather hoses for the VAG 150/180 BHP 1.8T engines. A known problem is the failure of the OEM rubber hoses after prolonged exposure to engine oil and fuel vapours. This leads to poor running and check engine lights. These uprated silicone hoses have an oil resilient lining to ensure longevity. Available in red, blue, or black. These hoses are suitable for engines coded: AUM,AUQ,ARX,ARY,BVR and BVP. The OEM hoses which are replaced are 06A 103 221 BH/AH and 06A 103 221 AF/BK. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* AudiA31.8TTTMk1150/180BHPSeatIbizaMk3 (6L) 2002-2008PetrolLeonMk1 1998-2005Cupra 1.8TSkodaOctavia1.8TVolkswagenBora (1998-2005)GolfMK41.8T   *T&C’s apply     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Red Hose available only This Forge Motorsport dump valve discharge pipe is available in red, blue or black and is the perfect complement to the other hoses we produce for the Fiat 500 1.4 T-jet engine. As always we have engineered this to not only look good, but to improve on the original fitment. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* *T&C's Apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge Motorsport EGR replacement kit. This kit is like no other for the T5 5 cylinder 2.5 diesel engine. It not only removes the restriction of the EGR valve but also fixes the common oil leak issue with the OEM hose and coupler. The Forge in house CNC machined EGR adapter, blanking cap and hose coupler complete with oil resistant hose addresses all issues providing the most comprehensive kit available. No cutting of original hoses required. The removal of the EGR valve, even those which are working perfectly, will give an increase in power, but most of the EGR valves after a period of time, compounded by those vehicles used on short journeys, will partially block and lead to power loss and poor running if they are not cleaned or replaced. This really is a worthwhile modification.  Please be aware the engine management light will come on and the glow plug light will flash, which will not effect  the way the vehicle drives. However you may wish to get the ECU remapped to overcome this.   If in the UK we have a trusted company who can do this for you. Pendle Performance Phone : 01282 851025Email : Sales@pendleperformance.comWeb : www.pendleperformance.com   PLEASE NOTE THIS WILL ONLY FIT TO ENGINE CODES AXD, AXE and BLJ Replaces VW EGR part number 070 128 070E   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A Silicone Intake hose designed for the Tjet engine using Garrett Turbos based on the standard Abarth hardpipe, but with the size and flow maximised for improved performance. Please note: this will NOT fit the Abarth Multiair engine (US Market). THIS IS FOR THE GARRETT TURBO ONLY.  IHI turbo (in situ) Garrett turbo (in-situ)    The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This replacement hose and alloy couplers is an essential upgrade for all owners with tuned cars running higher boost pressures. The hose is made from Fluoro silicone ( available in ocre colour only) with Nomex re-inforced lamination. This combination can withstand the high temperatures associated with being fitted so close to the turbocharger and withstand the oil that may accumulate within the hose, which would normally lead to degradation if ordinary silicone was used.   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This replacement Fluoro Silicone Turbo Hose,130 or 150 Diesel, and alloy couplers is an essential upgrade for all owners with tuned cars running higher boost pressures. The hose is made from Fluorosilicone with Nomex reinforced lamination. This combination can withstand the high temperatures associated with being fitted so close to the turbocharger, and withstand the oil that may accumulate within the hose, which would normally lead to degradation if ordinary silicone was used.   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES FITS: SeatLeonMk2 2005-2012DieselVolkswagenGolfMK4Diesel   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description: De-resonator induction hose for the 1.0 Ecoboost. This Forge Motorsport silicone induction hose will fit both the Ford Fiesta Mk7 and Focus Mk3 1.0 Ecoboost engines. It is not just a visual improvement to the engine bay, but features a smooth internal bore offering less restriction to the turbocharger than the OEM resonator pipe. This means increased airflow to the engine and enhanced induction noise. This hose is available in red, blue and black with stainless steel hose clamps.    The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.

Read more less

This performance part replaces OEM part number K1BY-9R504-A This performance inlet pipe for the Ford Fiesta ST MK8 & Puma ST fits between the air filter and turbo inlet pipe and is a highly visible component of the engine bay, accordingly its available in red, blue, grey and black. Its fully compatible with either the OEM filter box or our intake for this application. Unlike the stock Ford hose (K1BY-9R504-A) , the Forge inlet hose maintains a constant internal diameter to ensure a smooth flow of air to the turbo charger, which owners have commented makes the car livelier to drive.  Our high grip hose clamps are included with this product. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty on Ford performance parts and also makes and models on our website* Complimentary Products The FMINDK38 is the cold air induction system for Ford’s latest generation 1.5-liter 3-cylinder ST engine. Like with all manufacturers in recent times the need to make smaller engines more efficient and more powerful has been an engineer’s top priority, this then creates a problem for the aftermarket manufacturers to improve what is already fitted to the vehicle, nevertheless this hasn’t stopped us at Forge Motorsport. On a tuned vehicle this combination is an essential purchase as the OEM air box is found to be too restrictive to achieve the optimum power figures and smooth power delivery. This beautifully crafted high flow charge pipe is for the Ford Fiesta ST MK8 and Ford Puma ST. This product has been created over many days and months of dyno testing and road testing to prove the products credentials. The boost pipes are a direct replacement to the original hot-side charge pipe which is rather restrictive especially at the turbo end. FMBP6 was developed to remove these restrictions and now features a smooth and enlarged bore size creating a vast improvement in air flow and a reduction in pressure drop.  

Read more less

This performance part replaces OEM part number K1BY-9R504-A This performance inlet pipe for the Ford Fiesta ST MK8 & Puma ST fits between the air filter and turbo inlet pipe and is a highly visible component of the engine bay, accordingly its available in red, blue, grey and black. Its fully compatible with either the OEM filter box or our intake for this application. Unlike the stock Ford hose (K1BY-9R504-A) , the Forge inlet hose maintains a constant internal diameter to ensure a smooth flow of air to the turbo charger, which owners have commented makes the car livelier to drive.  Our high grip hose clamps are included with this product. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty on Ford performance parts and also makes and models on our website* Complimentary Products The FMINDK38 is the cold air induction system for Ford’s latest generation 1.5-liter 3-cylinder ST engine. Like with all manufacturers in recent times the need to make smaller engines more efficient and more powerful has been an engineer’s top priority, this then creates a problem for the aftermarket manufacturers to improve what is already fitted to the vehicle, nevertheless this hasn’t stopped us at Forge Motorsport. On a tuned vehicle this combination is an essential purchase as the OEM air box is found to be too restrictive to achieve the optimum power figures and smooth power delivery. This beautifully crafted high flow charge pipe is for the Ford Fiesta ST MK8 and Ford Puma ST. This product has been created over many days and months of dyno testing and road testing to prove the products credentials. The boost pipes are a direct replacement to the original hot-side charge pipe which is rather restrictive especially at the turbo end. FMBP6 was developed to remove these restrictions and now features a smooth and enlarged bore size creating a vast improvement in air flow and a reduction in pressure drop.  

Read more less

A set of six coolant hoses for both the Hyundai i30n and Veloster N, which replace six of the OEM rubber hoses in the coolant system.  Forge designed these silicone hoses to withstand pressures that can be experienced on tuned and remapped engines. They will long outlast the original hoses and with our limited lifetime warranty on all Forge products, you can be sure these hoses won't let you down. Complete with all hose clamps required. Available in red, blue, or black - Please select your choice in the options above when ordering. We recommend you give yourself one hour to two hours to install all the hoses, remember that you will have to drain your coolant to fit these so make sure to have a tray to catch all the coolant.   TOUCHSHAREFULLSCREEN This interactive image was created with ThingLink.View this image on thinglink.com.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

THIS WILL ONLY FIT 4" INTAKES - THIS WILL NOT FIT THE STOCK AIRBOX With Forge leading the way in aftermarket products for the new Hyundai’s, we are proud to present our turbo inlet adaptor for the i30N and Veloster N.  fits: Hyundaii30NMk3 2018-2020 (Including Fastback)VelosterN 2019-2020 T-6DI Designed and developed by our highly skilled team on the Solidworks CAD system, the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit your engines performance. With one of the weak links on the i30N and Veloster's intake system being the restrictive aluminium inlet pipe, we found something more was needed on stage 1 and 2 tuned vehicles. You can not go wrong with Forge hardware on your tuned Hyundai - the results speak for themselves! Mated to our 4” intake and high performance filter (FMINDK28) the gain from the turbo adaptor alone was 10BHP, and, along with a gain in torque, it really transforms your driving experience. The power can be felt from just above 3000 RPM and helps keep a hard consistent pull all the way to the rev limiter.                                                                   Testing was completed on a Maha independent dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all of their engine calibration and dyno testing. Interestingly there has been lots of divided opinions about our intake requiring a heat shield. Testing took place with the bonnet shut and replicated wind speeds of around 70MPH. Intake temperatures were logged and monitored along with thermal images taken,. During this testing, we did not see the inlet pipe or intake temperatures rise; even after 4 hard pulls, the inlet temperatures stayed at a steady 30°C. The Forge developed turbo inlet adaptor improves your i30N or Veloster's airflow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes due to more air being kept within the intake system. The Forge turbo inlet adaptor and high flow inlet pipe has a capacity of more than 150% over the stock item. Not only will you notice the increased performance, but also a slight change in your engine acoustics can be heard. As with all Forge motorsport products we offer a no quibble lifetime guarantee on both the silicone hose and billet adaptor. Will this fit other intakes? The answer is yes, it will fit other manufacturers intakes that have an inlet pipe of 102mm (4”). This will not fit the OEM. This is a simple installation and a modification that releases even more power from the Hyundai`s motor and fitting takes typically around 45 minutes and includes a full set of comprehensive installation instructions. Manufactured from 6082 aerospace grade aluminium Black anodised for ultimate protection and durability Increased capacity of over 150% No engine check lights (EML) Perfect fit with our induction kit Increased air flow The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader Made in the UK Lifetime warranty   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less