The RacingLine upper and lower Twin Dogbone Mount Insert is one of the most affordable and transformative upgrades you can do to your MQB/MQB Evo car.
By slipping the RacingLine Twin Dogbone Insert into the voids of your factory lower engine mount you will stiffen the whole location of the drivetrain greatly to give a much tighter, sharper, more responsive feeling to your car.
Crucially, fitting both the two-piece upper and lower inserts of the RacingLine Twin Dogbone Insert eliminates the bending forces that can cause damage and ultimately failure if just one insert is fitted (as many others offer).
The RacingLine Twin Dogbone Insert limits the compliance of the lower engine mount by filling the large voids with our two billet inserts.
All of the forwards/backwards rocking movement in your drivetrain is controlled by this Lower Mount – fitment of the RacingLine Twin Dogbone Insert adds strength to the drivetrain, helping to protect from future wear and breakages.
The risk of wheel-hop under hard acceleration is almost eliminated as the whole engine and 'box assembly is firmly prevented from juddering when wheelspin occurs and through aggressive gearchages.
Fitment of the Twin Inserts will only add a minimal increase NVH to the car’s characteristics, but most keen drivers love the sense that they are more 'connected' to their car, and the gentle 'growl' that the mount conveys.
Transform the drive through eliminating wheel-hop off the line and through aggressive gearchanges - especially valuable on FWD cars.
Unlike polyurethane or steel insert options on the market, this billet aluminum part will not deform and wear over time, and guarantees long-lasting performance.
The Twin Dogbone Insert uses not one but two precision machined billet inserts to avoid the damaging bending moment that comes from fitment of a single insert.
Machined from billets of T6061 Aluminium, the Twin Dogbone Insert is more than strong enough to keep the drivetrain properly located on high power, hard driven cars.
Twin Inserts.
Working together.
Upper Insert: slides into the voids along the rear side of mount.
Lower Insert: inserts into the voids from underneath.
Confirmed Applications.
MQB & MQB 'evo'
2.0 TSI, 1.8 TSI, 2.5 TFSI, 2.0 TDI MODELS
VWR150003/4 see below to identify which type
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Audi RS3 2.5 TFSI 8V.2 evo
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cupra Formentor VZ5 2.5 TFSI
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Select your
correct version.
The factory mount comes in two version across MQB models. To ensure fitment on your vehicle, please visually verify the mount you have, then select the correct insert below:
-
OE part: 5Q0 198 037 A – You’ll require the Version 1 Insert
-
OE part: 5Q0 198 037 F – You’ll require the Version 2 Insert
-
We recommend a visual check to make certain you have the right version:
Precision Engineered for
Perfect Performance.
Each Twin Dogbone Insert start life as a billet of T6061 Aluminium, before being precision CNC-machined into shape
Carefully developed for minimal transference of NVH through to the cabin
RacingLine’s trademark black anodised finish for durability over many years
Engineered to slip easily into the voids In factory lower mount
Easy, straightforward installation designed to be fitted without subframe removal takes minutes
