Racingline

RacingLine Rear Wiper Delete Kit Stripping weight out of your track car? Prefer that clean, uncluttered look without the rear wiper? Then this Rear Wiper Delete kit is for you…. Unlike some wiper deletes, our design sits fully flush with the glass, making it near-invisible once fitted. The single-piece design is CNC-machined from Type-6061 Billet Aluminium, with the RacingLine logo delicately machined in. The glossy surface is hand-polishing, before being anodised in gloss midnight black for a long-lasting finish that blends almost invisibly with the rear screen. The kit is supplied with a RTV Silicone sealant for simple DIY fitment from the inside of the window, ensuring a strong, waterproof install. What’s included? Wiper Delete RTV Silicone Sealant Confirmed Applications Multiple applications for any car with a 26.5mm hole opening, meaning fitment for just about every modern Volkswagen Group car with a rear wiper. (See vehicle compatibility) Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR810000

Read more less

The Racingline Performance High-Flow Turbo Inlet Pipe for MQB Golf 7 GTI/R plus Audi S3 has been engineered to increase air flow through to the turbocharger as the perfect compliment our Racingline Performance R600 Cold Air Intake or even the standard airbox. A simple fitment, it replaces the entire restrictive rear factory plastic bellows pipe between the airbox and the turbocharger inlet pipe. This Turbo Inlet Pipe is a large diameter smooth-flowing silicon hose, crucially with enough compliance to allow for adequate engine movement without causing damage to the intake. There are solid turbo inlet pipes on the market, but without this compliance as the engine rocks under power, then something has to give – with a solid pipe it will either be your intake, or the pipe itself. Back-to-back comparisons with the factory pipe on our flow bench reveals an impressive improvement in airflow, and makes a great compliment to the R600 intake. Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi S3 (8V) 2012-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

Racingline DSG Shift Paddle Upgrade – Audi A3/S3 8V Please check the applications listed below. Cool, sharp and positive changes are guaranteed from our replacement S-Tronic blades for Audi B9 Platform A4/S4/RS4, A5/S5/RS5 S3/RS3/TTRS (flat bottomed). The new billet aluminium blades, unlike cheaper alternatives, completely replace the standard paddles. Look great, feel great with precision shifting. PERFORMANCE AT YOUR FINGERTIPSWe have extended the size of the paddles above and below the steering wheel spokes to make pulling that next gear easier in tight turns when your hands are busy steering. This ensures that your performance behind the wheel is never compromised. NEVER SETTLE FOR LESSThere are many cheap ‘stick-on’ paddles available. As a full replacement unit, the Racingline Performance Racingline Performance DSG Paddles are completely different. The ‘stick-ons’ rely on double-sided foam tape laid on top of the factory plastic paddles and this will never give the positivity or long term rigidity that car and driver deserve. EXQUISITE DETAIL AND EXCEPTIONAL QUALITYAs with all our upgrades, the quality and attention to detail on our Racingline Performance DSG Paddle Replacements is instantly apparent. The +/- symbols are delicately cut out of the top of each blade. Polished, then gloss-anodised in a choice of Piano Black or Titanium-Silver before a laser-etched Racingline logo is placed on the bottom of each blade as a discreet assurance of quality. SIMPLE FITTINGFitting Racingline Performance DSG Paddles couldn’t be easier. With long-nosed pliers, simply pull out the pin from underneath the standard paddle – and the paddle comes away. Position your new VWR DSG Paddle into place, slide the pin back in fully and you’re good to go. Note: Some steering wheel variations may require airbag removal, we advise professional fitting in these instances. Confirmed Applications VWR493000 (Black)  /  VWR493001 (Titanium) Audi S3 8V 2013-2020 Audi A3 8V 2013-2020 Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR49300

Read more less

2.0 TSIOil management system& catch can for 2.0 TSI EA888.3 If you're going to take your MQB car on track, you really need our 2.0 TSI Oil Catch Can Oil Management Kit. Without it, you'll risk oil starvation.Simple as that. How doesit work? Not all catch tank kits are equal. Designed with a built in engine baffle plate, our system is uniquely designed to aid engine oil control, as well as catching unwanted oil and water vapour. The 2.0 TSI EA888.3 retains oil in the engine under excessive braking G-forces. Oil pools at the front of the engine, leading to smoke clouds and ultimately oil starvation.  3 way baffled catch tank to effectively  collect excess moisture and oil vapour. Keeps your intercooler and inlet tracts clear of oil build-up and provides clean airflow through the inlet manifold. DIRECT PCV REPLACEMENT Our catch tank kit is supplied complete with a replacement PCV plate offering easy installation. 210 SERIES BRAIDED HOSE Our oil lines feature an attractive outer nylon braid strengthened by a stainless steel inner weave for maximum resilience.   SUPERIOR BAFFLE SYSTEM A built in baffle plate prevents oil surging to the cylinder head and making its way into the intake - or worse, starving the engine. CATCH TANK Not just a tank, but a three way inner division ensures separation of moisture and oil.  PRECISION MACHINED Precision machined components utilising the latest 5 Axis CNC machines. POLISHED SWIVEL FITTINGS Racingline fittings are all hand polished before anodising for the ultimate finish and limits the chances of "spanner rash" PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC technology. AN-10 male fitting for main breather line. Removable baffle plate for easy maintenance Sealing gasket against the PCV replacement plate. CONFIRMED APPLICATIONS VWR13G700 > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ * For 2019 Golf GTI only a new evaporation canister which obstructs the catch can fitment. ​ You will need to purchase Volkswagen part 5Q0133366K to allow fitment

Read more less

Racingline Hi-Flow Turbo Inlet 1.0TSI – VWR12UPITINLET The new 1.0 TSI Turbo Inlet Elbow transforms the airflow reaching your turbocharger. Let your engine breathe free! It’s compatible with your factory intake box, ideally combined with our Performance Filter. It also fits with other aftermarket intakes, and will be the perfect compliment to our upcoming Cold Air Intake too. It’s ready to support higher power outputs and even turbo upgrades in future. The Intake Upgrade Kit comprises a new high-flow Turbo Silicone Inlet Hose plus Turbo 90 Inlet. Together these upgrades allow greatly increased airflow from your intake into the turbocharger for lightning fast turbo response and a worthwhile power gain. So whether you’re running a standard airbox or you’ve already fitted an intake system, you’ll be wasting potential airflow gains without this Turbo Inlet Elbow! Confirmed Applications All models fitted with the current EA211 1.0 TSI engine; Volkswagen UP GTI 2016+ Volkswagen UP 1.0 TSI 2016+ Volkswagen Polo 1.0 TSI 2017+ AW Volkswagen Polo 1.0 TSI 2014+ AW Volkswagen Golf 7 & 7.5 1.0 TSI 2015-2020 Volkswagen Caddy 1.0 TSI 2015-2020 Volkswagen T-Roc 1.0 TSI 2017+ Volkswagen T-Cross 1.0 TSI 2017+ Volkswagen Touran 1.0 TSI 2018+ Audi A1 1.0 TSI 2015+ Audi Q2 1.0 TSI 2016+ Audi A3 1.0 TSI 2016+ Seat Ibiza 1.0 TSI 2015+ Seat Leon 1.0 TSI 2015+ Seat Arona 1.0 TSI 2017+ Seats Ateca 1.0 TSI 2016+ Seats Toledo 1.0 TSI 2017+ Skoda Fabia 1.0 TSI 2014+ Skoda Octavia 1.0 TSI 2016+ Skoda Karoq 1.0 TSI 2017+ Skoda Rapid 1.0 TSI 2017+   Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR12UPITINLET

Read more less

2.0 TSI EA888.3 & 3BTurbo Muffler DeleteFor all VW, Audi, Cupra, Skoda 2.0 TSI A smooth, turbulence-free air path exiting your turbo with the RacingLine 2.0 TSI Turbo Muffler Delete. What theTurbo Muffler Deletedoes. Our Turbo Muffler Delete is a sleek single billet design which replaces the restrictive, power-robbing compressor outlet with a smooth, turbulence free air path exiting the turbo. The standard part is located on the outlet of the turbo compressor and is simply designed to reduce engine bay acoustics. Whilst it subdues the harmonic noises generated by the turbo, it also adds in disruptive turbulence to the airflow right where you don't want it.   By replacing the standard part with our maximum diameter Turbo Muffler Delete, you’ll replace this unwanted restriction with a smooth CFD-developed uninterrupted air path.  The result: noticeably better boost response giving a little more power and throttle reaction, all the while being able to actually hear your turbo working. COMPATIBILITY The Turbo Muffler Delete is compatible with all MQB EA888.3 1.8T and 2.0T cars. An essential fit with any upgraded intake system. TURBO SOUNDS By smoothing the airflow path out of the turbocharger, eliminating the restriction and turbulence caused by the OEM part, you'll at last be able to hear your turbo working! EASY FIT Fitting is straightforward. The kit is installed in around 30minutes using just hand tools.   And easily returned to standard, should you ever wish. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. CNC constructed from single-piece billet T6-6061 aircraft grade aluminium. Hand polished then anodised in gloss midnight black to look good, and stay looking good. Maximum diameter smoothed internal bore for max airflow. The white laser-etched RacingLine logo is all part of the detail. CONFIRMED APPLICATIONS 2.0 TSI & 1.8 TSI EA888 gen.3 & gen.3B engines VWR160001  > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

A must have for R600 intakes, Racingline Underhose Our new R600 Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look. Includes a factory one-way valve incorporated, just like the original; don’t run your car without this valve! CONFIRMED APPLICATIONS VWR17 G7R600 FOR CARS WITH R600 FITTED > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Ateca 2.0 TSI 190hp 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ > Skoda Kodiaq 2018+ > Skoda Kodiaq 2.0 TSI 190hp 2018+

Read more less

2.0 TSI Turbo 90 Inlet.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3VWR12G7R600ITINLET  The RacingLine 2.0 TSI Turbo Inlet is an essential addition to your airflow package - ultra-thin-wall, double O-ring flow from intake straight into turbo What the 2.0 TSI Turbo Inlet does. A simple fitment, the ultra-thin-wall VWR High-Flow Turbo 90 Inlet is a large diameter, free flowing intake elbow, delicately CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.  The factory inlet forces the airflow to taper right down to pass through a tight and restrictive bend - in other words, terrible for flow.  The RacingLine Turbo 90 is the thinnest-wall construction on the market for highest flow. Twin O-rings ensure the perfect seal. Some of our rivals' less carefully-machined, or even thick cast versions rob valuable airflow. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting the Turbo 90. An essential upgrade! COMPATIBILITY The Turbo 90 Inlet is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS Take away the standard plastic elbow's highly restrictive airflow path through to the turbo. The ultra-thin wall VWR High-Flow Turbo 90 gives a worthwhile power gain through smoothing and opening up that turn into the turbo. EASY FIT Fitting is very straightforward. Twin O-rings ensure perfect seal. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered forperfect performance. The white laser-etched RacingLine logo is all part of the detail. Twin nitrile O-rings for the perfect seal. CNC constructed from T6-6061 aircraft grade aluminium. Hard anodised in gloss black to look good, and stay looking good. Maximum diameter ultra-thin wall smoothed internal bore for max airflow. SPOT THE DIFFERENCE CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

Racingline Sport Lowering Springs SEAT Leon Mk3 Cupra – VWR31G7GT Lowering Range:20-25mm Front and Rear Racingline Performance Sport Springs are engineered to replace the standard springs with a shorter and stiffer spring, while lowering the centre of gravity they will also help to reduce body roll for better handing over the standard springs and while offering fantastic ride quality and comfort, which can be improved from the standard ride on some applications. These springs have been designed to work in harmony with the standard dampers so no other changes are needed. Racingline Performance Sport Springs are for customers who demand performance over the stock setup without costing thousands! The spring range offered by Racingline Performance are not designed to drastically lower the vehicle, however for those of you who do want this you can look at the Racingline Performance range of coilover kits.   SKU: VWR31G7GT

Read more less

2.0 TSI EA888 gen.4 ContinentalTurbo Inlet SystemTurbo 90 Inlet & Silicone Inlet Hose.For VW, Audi, Cupra 'higher output' 300/310/320PS (Continental turbo)  Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo.For the Continental turbo (higher output) 300/310/320PS engines such as Golf 8 R, Golf 8 GTI CS, Tiguan R, Audi S3 8Y & Cupra Leon & Formentor and many more.   What the turbo inlet system does.  Our new Turbo Inlet System for the 300-320PS MQB 'EVO' cars such as Golf 8R, GTI CS, Audi S3 8Y etc is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo. The factory inlet forces the airflow to pass through the restrictive plastic 'bellows' pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet - in other words, terrible for flow.  The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow. The internal diameter of the Turbo 90 Inlet is massively increased from 74mm on the factory part right up to 84mm. It's by combining the two parts of the kit that's allowed us to enlarge the diameter of both the Inlet and the Hose so much - and so give the maximum possible gains. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade! TWO PIECE KIT It's only by combining both elements of this kit that we've been able to increase the diameter so significantly (+10mm) to release the true airflow gains.  POWER GAINS The ultra-thin wall High-Flow Turbo 90 Inlet features an internal velocity stack to maximise airflow capability through to the turbo's inlet. EASY FIT Fitting is straightforward. The kit is installed in around 30minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered for perfect performance.  Reinforced high quality silicone prevents deformation under load or heat Flexible enough to allow just the right amount of engine movement under load Internally-stepped silicone to ensure smooth transitions CNC constructed from T6-6061 aircraft grade aluminium with Viton sealing O-ring Maximum 88mm outer diameter with ultra-thin wall 2mm tube, smoothed internal bore Polished then anodised in gloss black to look good, and stay looking good. CONFIRMED APPLICATIONS For MQB Evo cars with the 300-320ps EA888.4 (Continental turbo) engines:VWR120010 For Tiguan R ONLY with the 320ps EA888.4 (Continental turbo) engines:VWR120012 > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW T-Roc R 2.0 TSI EA888.4 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y 2020+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 (facelift EA888.4) 2021+ > Cupra Leon IV 300 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Skoda Superb III 3V 2.0 TSI (facelift EA888.4) 2021+

Read more less

Stage 2 'EVO' MonoblockPerformance Big Brake Kit. Our new Stage 2 'EVO' Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it's the same pad as a Ferrari F40!).   Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. Why upgrade? All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 'EVO' Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars.   We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars.   MONOBLOCK The 'Monoblock' construction of our 4-piston aluminium thin-profile calipers give extreme stiffness and light weight, and aid in wheel clearance packaging (min 17" wheel). GROOVED & VENTED The 345mm x 30mm discs, with integral mounting bells, use our ‘Triple Groove’ design across the face for improved bite and debris clearance. DISC QUALITY A one-piece disc (rotor) made from high cast carbon - a mixture of high quality steel combined with carbon; giving a far higher friction coefficient compared to normal steel rotors. VWG-SPECIFIC Engineered exclusively for VWG cars, with piston sizes matched to master cylinders and servos for perfect responses and a beautiful pedal feel. SPORT PADS Composite Ceramic Sport Pads are included with the Stage 2 'EVO' kit with the ideal compound for fast-road use. The kit uses generic pad dimensions, meaning you can choose your ideal pad/brand. FULL INSTALL KIT Everything you need for installation: discs, callipers, mounting brackets, fast road pads, braided steel lines. Plus the option of Hub Adaptors for extra wheel clearance. Bolt on & drive Track use? This Stage 2 'EVO' kit has been developed as a highly effective fast road kit that also works for occasional track day usage. ​ However, if you're into regular heavy track use, this probably not the right kit for you! For track users, we strongly recommend our Stage 3 Forged Monoblock Brake Kit. BLACK CALIPER VWR652000-BLK VWR652003-BLK Sophisticated high gloss black RED CALIPER VWR652000-RED VWR652003-RED Colour matched to factory GTI BLUE CALIPER VWR652000-BLU VWR652003-BLU Colour matched to factory Golf 8R Hub Adaptors forperfect fitment. RacingLine’s brake kit features our unique design that allows these 5mm Hub Adaptors to be solidly, mechanically mounted onto the front face of the disc to give you that extra clearance. No more adding loose spacers onto your car (and approved in markets where spacers are illegal). ​ We recommend this 5mm Hub Adaptor for anyone using this brake kit under factory wheels. ​ PART NUMBER:  VWR620005MM Loseweight. Saving unsprung weight is really important on a performance car.    So we've spend a lot of our development and design time making sure that our 'EVO' Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving - as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers.   Confirmed applications. VWR652000 RED/BLK/BLU (MQB) > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ VWR652003 RED/BLK/BLU (A5 PLATFORM) > VW Golf 5 GTI 2005-2008 > VW Golf 5 R32 2005-2008 > VW Golf 5 GTI ED30/Pirelli 2006-2007 > VW Golf 6 GTI 2009-2014 > VW Golf 6 R 2009-2014 > VW Scirocco R 2009-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > SEAT Leon II Cupra/R 1P 2006-2012 > SEAT Leon II 1P 2005-2012 > Skoda Octavia II vRS 1Z 2004-2013

Read more less

Racingline Gen.3B R600 Air Intake System for 2.0T (190PS) Models – VWR12G7R602 Racingline have now added a Specific R600 kit for the latest 2.0TSI 190hp engines which use a MAF Sensor (EA888 gen 3B). This engine is becoming ever more popular across the VWG range.The R600 housing is exactly the same as the original, however the filter now has an Aluminium 6061-T6 adaptor bonded on to mount securely onto the OE MAF housing – keeping it in the factory location with no other modifications needed. Confirmed Applications VW Passat 2.0 TSI 190hp B8 2018+ 3G VW Arteon 2.0 TSI 190hp 2017+ VW Tiguan II 2.0 TSI 190hp 2018+ VW T-Roc 2.0 TSI 190hp 2017+ Audi A3 40TFSI 2.0 TSI 190hp 2016+ Audi Q2 40TFSI 2.0 TSI 190hp 2017+ Audi Q3 40TFSI 2.0 TSI 190hp 2018+ Audi TT 40TFSI 2.0 TSI 197hp 2018+ SEAT Leon III 2.0 TSI 190hp 2018+5F SEAT Ateca 2.0 TSI 190hp 2017+ SEAT Tarraco 2.0 TSI 190hp 2018+ Skoda Octavia III 2.0 TSI 190hp 2017+ 5E Skoda Superb III 2.0 TSI 190hp 2019+ 3V Skoda Karoq 2.0 TSI 190hp 2018+ Skoda Kodiaq 2.0 TSI 190hp 2018+ Looking for the MQB platform compatible R600 Intake? (Golf R/GTI, S3/TTS, Leon Cupra 280/290/300) IMPORTANT NOTES:– This intake will only fit 2.0TSI Gen3 B ‘190PS’ vehicles.– It is not compatible with the 220/230/245/265/280/290/300/310ps models. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR12G7R602

Read more less

MQB (Multi-Link) Spring and Damper Kit When it comes to sport dampers the compromise between performance and comfort has been a persistent dilemma for keen drivers and enthusiasts. With the RacingLine Performance Sport Damper kit, which consists of two front and two rear shocks, this dilemma becomes a thing of the past for Golf 7 Platform cars at an affordable price. Fitting the RacingLine Performance Sport Damper kit ensures superior road-holding and a positive transformation in handling characteristics without compromising comfort. Our Sport Dampers are designed to maximise comfort and performance on all road conditions, and driving styles; guaranteeing greater stability, control and therefore driving pleasure. This kit has been designed to work in harmony with RacingLine Performance Sport Springs. In tandem, these upgrades provide the ultimate in handling and comfort. These two upgrades really do make the perfect combination for your car. This kit will fit the following vehicles with a 55mm Front Strut and Multi-Link Rear Suspension only:* Volkswagen Golf Mk7* Audi A3 8V* SEAT Leon Mk3* Skoda Octavia Mk3 Notes: – Not suitable for Audi S3– Not suitable for cars with Mag-Ride/DCC Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8V) 2012-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

Stage 3 Forged MonoblockPerformance Big Brake Kitfor VW/Audi/Cupra/Skoda Our Stage 3 Forged Monoblock 6-piston Big Brake upgrade is simply a level above anything else on the market. Designed without compromise for ultimate stopping performance, it's packed with motorsport-inspired features, bringing a true supercar look and feel in the braking department Why upgrade? The RacingLine Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.   Our design vision was made possible by our advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail. Each lightweight Forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits. The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing. Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent. The kit offers a choice of 355mm or 380mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. Whichdisc/rotor size? 380mm DISCS/ROTORS: Minimum 19" wheel diameter required. 355mm DISCS/ROTORS: Minimum 18" wheel diameter required​.   MONOBLOCK The 'Forged Monoblock' construction of our 6-piston aluminium thin-profile calipers give extreme stiffness and light weight, and aid in wheel clearance packaging. DISC QUALITY Two-piece floating high cast carbon discs - a mixture of high quality steel combined with carbon; giving a far higher friction coefficient compared to normal steel rotors. In either 355mm or 380mm diameter, 32mm thickness. FULLY-FLOATING Fully floating mounting between disc and bell allow for thermal expansion and contraction to avoid cracking. The anti-rattle mounts keep it quiet.  VWG-SPECIFIC As our kit is engineered exclusively for VWG cars, we've developed piston sizes perfectly matched to master cylinders and servos for beautiful progressive pedal response.   PAD CHOICE Composite Ceramic Fast-Road Pads are included. We use a generic pad size, meaning a wide choice of pad brands & compounds are available if you're planning hard track use.  FULL INSTALL KIT Everything you need for installation: discs, callipers, mounting brackets, fast road pads, braided steel lines. Plus the option of Hub Adaptors for extra wheel clearance. Bolt on & drive!   Confirmed applications. 355mm x 32mm kit: Minimum 18" wheel diameter required​. 380mm x 32mm kit: Minimum 19" wheel diameter required​. Our Hub Adaptors recommended for use with factory wheels. MQB CARS 355mm VWR650001 RED/BLK/ANO/CHR/BLU 380mm VWR650000 RED/BLK/ANO/CHR/BLU > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ A5 PLATFORM 355mm VWR650002 RED/BLK/ANO/CHR/BLU 380mm VWR650003 RED/BLK/ANO/CHR/BLU > VW Golf 5 GTI 2005-2008 > VW Golf 5 R32 2005-2008 > VW Golf 5 GTI ED30/Pirelli 2006-2007 > VW Golf 6 GTI 2009-2014 > VW Golf 6 R 2009-2014 > VW Scirocco R 2009-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > SEAT Leon II Cupra/R 1P 2006-2012 > SEAT Leon II 1P 2005-2012 > Skoda Octavia II vRS 1Z 2004-2013 * Fitment of the Stage 3+ brake kit on 2.5 TFSI RS3 Sportback/Saloon or TTRS, requires shims between the bearing housing/upright and caliper mounting bracket to centralise the disc between the pad surfaces – failure to do so will cause caliper and rotor damage. Please check with your dealer before fitment.

Read more less

Replacement Brake Pads for the Racingline 'Stage 2 Evo' 4-Piston Calipers - Stock CompoundThese are designed for standard road use and light fast road use. These are the ones which come in the kit when new. Wear indicators are not fitted to these pads - Track CompoundThese are designed for heavy fast road use only and light track use. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature. Additional pad noise and brake dust will be noticed. Wear indicators are not fitted to these pads - EBC Yellowstuff CompoundDesigned for fast road use and light track day use. These 'R90' Approved pads are road legal, and offer slightly lower dust levels than stock pads. Wear indicators cannot be fitted to these pads- Ferodo DS PerformanceThese are designed for standard road use and enthusiastic fast road use.These are probably the best all rounder available for this kit and suit the needs of most of our customer's for Non-Tracked vehicles.Wear indicators cannot be fitted to these pads- Ferodo DS2500 CompoundThese are designed for more aggressive fast road use and ocasional 'beginner' track days. They have the same bite from cold as the stock compound, but an extended heat range. Some additional 'pad noise' and brake dust will be noticedWear indicators cannot be fitted to these pads - Ferodo DS3000 CompoundThese are designed for Track use only. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature. Additional pad noise and brake dust will be noticed. Wear indicators cannot be fitted to these pad- Pagid RSL-29 CompoundThese are designed for Track use only. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature. Additional pad noise and brake dust will be noticed. Wear indicators cannot be fitted to these pads - EBC RP1 CompoundDesigned for vehicles that are driven hard on track, RP1 possesses a modeately high friction level of 0.45 between 100 and 750 Celcius. This compound is an ideal heavy track use compound for over servo'd vehicles such as the VAG range. Wear indicators cannot be fitted to these pads - Tarox Corsa CompoundThese are ideal for fairly aggressive fast road use and ocasional 'beginner' track days. They have a reasonably good bite from cold as the stock compound, but an extended heat range. Some additional 'pad noise' and brake dust will be noticedWear indicators cannot be fitted to these pads- Tarox Competizione CompoundThese are designed for Track use only. They don't bite great from cold, however they have a higher heat range and a really good bite once up to temperature. Additional 'pad noise' and brake dust will be noticed. Wear indicators cannot be fitted to these pad Do I have the Old kit, or the EVO Kit? We have included an image in our listing to help customers check if they have the Older kit or the EVO Kit. EVO Kit - The EVO Kit can be identified by the shape of the caliper pistons being highlighted in the extenal design of the caliper. As well as this, the EVO Kit has a brace bar running down the Length of the Caliper.  VWR0323

Read more less

Racingline Front Panel Adaptor - A3/S3 8PReplacement Front Panel Adapter to suit the following Racingline Intake Kits: - VWR1230S3- VWR123020

Read more less

Sport Lowering SpringsGOLF mk8 R (DCC compatible), 5-door & Estate/WagonVWR31G80R Golf 8R 5 door  I  VWR31G70RW Golf 8R Estate Make RacingLine Sport Springs the first upgrade to your Golf mk8 R. What they do. If you use your Golf mk8 R on a daily basis and are only looking to uprate one aspect of your car, you can't do better than our Sport Springs.  They replace the car's four standard springs with re-engineered, different-rate and slightly shorter Sport Springs. The vehicle's centre of gravity is lowered, reducing body roll for better dynamics, whilst maintaining the ride quality and comfort of your car. Meanwhile, the car's appearance is transformed. By getting rid of those nasty wheelarch gaps, it'll look like it always should've from the factory! What's not to like? No wonder our Sport Springs are our best-selling product worldwide. THE PERFECT DROP The springs lower the Golf 8R by around 20mm-25mm in order to preserve the wheel travel needed for perfect ride & handling. ADVANCED CONSTRUCTION ​We use progressive rate springs to preserve the ride quality in normal use, but then stiffen the rates at the ends of the travel. DCC COMPATIBLE The Sport Springs are developed to be fully compatible with cars fitted with Volkswagen's DCC suspension and the regular Sports Suspension. SPECIFIC TO GOLF 8R Unlike many, our Golf 8R Sport Springs have only been developed for 8R. Meaning no compromise for your car. OEM STANDARD All our Sport Springs are high quality, European-made springs, from the same factory that produces many of the OEM springs. BEAUTIFUL RIDE Our extensive development programme has given us a ride quality just as good as that of the standard car. Precision engineered for perfect performance. Many experts consider suspension development to be as much an art as a science.  In truth, it's a bit of both.   Go lower or stiffer than our springs and your car will bounce and crash as the dampers are mismatched to spring-rate, and the springs themselves run out of travel. Our progressive-rate spring construction means the spring rate in the middle of travel is very similar to standard.  It's only towards the end of the spring's travel (so, when braking or cornering hard) that we have engineered the spring to stiffen up. It's this progressive-rate spring design that gives such good ride quality. Confirmed applications. VWR31G80R Golf mk8 R  2021+   VWR31G70RW Golf mk8 R  Estate/Wagon 2022+

Read more less

2.0 TSI gen 4 EA888.4 245PSTurbo Muffler DeleteFor all VW, Audi, Cupra, Skoda 2.0 TSI gen.4 Choose a smooth, turbulence-free air path exiting your turbo with the RacingLine 2.0 TSI Turbo Muffler Delete.For the Garrett turbo (lower output) 245ps engines such as Golf 8 GTI, Audi A3/TT, Cupra Leon and Octavia vRS and more. What the gen.4Turbo Muffler Deletedoes. Our Tapered Turbo Muffler Delete for 2.0 TSI EA888.4 245ps is a sleek single billet design combined with larger diameter silicone joiner hose which replaces the restrictive, power-robbing compressor outlet with a smooth, turbulence free air path exiting the turbo. The standard part is located on the outlet of the turbo compressor to reduce engine bay acoustics, but adds in disruptive turbulence to the airflow right where you don't want it.  The OEM part is a 38mm inner diameter throughout, whilst the RacingLine tapered design enlarges up to 53mm, joining perfectly with the smooth 53mm, internally-stepped silicone hose. By replacing the standard part with the tapered Turbo Muffler Delete and Silicone Hose, you’ll replace this unwanted restriction with a smooth CFD-developed uninterrupted air path.  The result: noticeably better boost response giving a little more power and throttle reaction, all the while being able to actually hear your turbo working. FULL KIT This tapered Turbo Muffler Delete comes with Silicone Joiner pipe which enlarges from the OEM 38mm diameter up to 53mm throughout. Supplied with both pipes and fitting clamps. SMOOTH TRANSITIONS By smoothing the airflow path out of the turbo up to the larger 53mm diameter and using an internally-stepped silcone pipe, this massively reduces the restriction and turbulence caused by the OEM part. EASY FIT Fitting is straightforward. The kit is installed in around 30minutes using just hand tools.   And easily returned to standard, should you ever wish. An essential fit with your R600 upgraded intake system. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. CNC constructed from single-piece billet T6-6061 aircraft grade aluminium. Smooth transition up from 38-53mm - removing the restriction caused by OEM turbo muffler delete. Hand polished then anodised in gloss midnight black to look good, and stay looking good. The white laser-etched RacingLine logo is all part of the detail. CONFIRMED APPLICATIONS 2.0 TSI 245ps EA888 gen.4 engines ONLY VWR160000 > VW Golf 8 GTI 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi TT 45 TFSI 8S 245ps (EA888.4) 2021+ > Cupra Leon IV 245 TSI FW 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Kodiaq vRS 2.0 TSI 245ps (EA888.4) 2021+ Note: not applicable to the higher-output 300+ ps Continental-turbo engines such as Golf 8R, Golf 8 GTI CS, Audi S3 etc

Read more less

2.0 TSI EA888 gen.4 Garrett Turbo 245PS Turbo Inlet SystemTurbo 90 Inlet & Silicone Inlet Hose. RACINGLINE TURBO INLET ELBOW FOR 2.0 TSI EA888.4 245PS GOLF 8 GTI, LEON CUPRA FW, AUDI A3 8Y, OCTAVIA vRS NXVWR120003 For VW, Audi, Cupra 'lower output' 245PS / 207PS (Garrett Turbo)Golf mk8 GTI, Cupra Leon, Cupra Formentor, Octavia vRS & more. Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo.For the Garrett turbo (lower output) 245ps engines such as Golf 8 GTI, Cupra Leon & Formentor and Octavia vRS, plus 207ps Polo GTI AW.2 What the turbo inlet system does.  The RacingLine Turbo Inlet System for the 245PS & 207PS MQB 'EVO' cars such as Golf 8 GTI is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo. The factory inlet forces the airflow to pass through the restrictive plastic 'bellows' pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet - in other words, terrible for flow.  The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow. The internal diameter of the Turbo 90 Inlet is massively increased from 62.5mm on the factory part right up to 76mm. It's by combining the two parts of the kit that's allowed us to enlarge the diameter of both the Inlet and the Hose so much - and so give the maximum possible gains. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade! TWO PIECE KIT It's only by combining both elements of this kit that we've been able to increase the diameter so significantly (+13.5mm) to release the true airflow gains.  POWER GAINS The ultra-thin wall High-Flow Turbo 90 Inlet features an internal velocity stack to maximise airflow capability through to the turbo's inlet. EASY FIT Fitting is straightforward. The kit is installed in around 30minutes using just hand tools.   And easily returned to standard, should you ever wish.  PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Reinforced high quality silicone prevents deformation under load or heat Flexible enough to allow just the right amount of engine movement under load Internally-stepped silicone to ensure smooth transitions CNC constructed from T6-6061 aircraft grade aluminium with Viton sealing O-ring Maximum 80mm outer diameter with ultra-thin wall 2mm tube, smoothed internal bore Polished then anodised in gloss black to look good, and stay looking good. CONFIRMED APPLICATIONS For 245ps & 207PS EA888.4 (Garrett turbo) engines:VWR120003 > VW Golf 8 GTI 2020+ > VW Polo 6 GTI 2.0 TSI 207ps AW.2 2021+ > Audi A1 Competition 207ps 40TFSI GB 2021+ > Audi A3 2.0 TSI 8Y 2020+ > Audi TT 45 TFSI 8S 245ps (EA888.4) 2021+ > Cupra Leon IV 245 TSI FW 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Kodiaq vRS 2.0 TSI 245ps (EA888.4) 2021+

Read more less

R600 AIR INTAKEFOR MQB & MQB 'EVO' The RacingLine R600 Intake is the world's most sophisticated and best-selling MQB-platform cold air intake, with a choice of two filter element types. Now with fitment for the latest MQB EVO models such as Golf 8, Audi S3 8Y etc. Now with the added option of Carbon Fibre Lid - your choice of sophisticated Matte Carbon or stunning Gloss Carbon. WHAT'S SOSPECIAL? Looking for the most sophisticated cold-air intake available for your MQB or MQB 'EVO' 2.0 or 1.8 TSI? The R600 intake is our best selling system for this platform. Little wonder, as it combines OEM-standard design and quality with significant power gains on uprated cars. OEM-standards of design, quality, materials and construction, hand-made in the UK. Fits like a factory part; lasts like a factory part. Twin CFD-optimised front intakes extending across the front of the car help achieve lower intake temperatures and worthwhile power gains. Enormous airbox volume houses the filter, complete with thoughtful details like connection to the original factory drain tube, and an SAI connection for US cars. Your choice of filter unit, to suit different needs. Both are double the size of standard - rated right up to 600hp and beyond. TRIFOAM® FILTER UNIT ​ Faster, for longer The highest airflow of all filter types, for the best possible power for more of the time. As a high performance part, regular maintenance is essential to keep it at its very best. VWR12 G7R600 PLEATED COTTON FILTER ​ Fit and forget A robust 'fit and forget' filter that will last for years. It gives great initial power output but doesn't have the dust-loading capacity of Trifoam. VWR12 G7R601 PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Airbox is UK-moulded in factory specification PU Polyurethane PU gives excellent heat-insulation properties, keeping airbox temps lower. Both of our giant filter units are hand-made in the UK. Choose from Trifoam® or Pleated Cotton Every factory mounting point is retained for that perfect fit. GIANT FILTER UNIT It's your choice. Both our unique Trifoam® filter and new Pleated Cotton units are hand-made in the UK for the perfect filtration and minimum restriction. FULL-WIDTH INTAKE Twin front intakes extending across the front of the car help achieve lower intake temperatures and worthwhile power gains. CFD DESIGNED Airflow is no accident. Fully developed with F1-standard CFD programmes. It's no wonder so many high-power MQB cars choose the R600.   CONFIRMED APPLICATIONS 2.0 TSI MQB 'EVO' / EA888.4 engines  NEW! 2.0 TSI & 1.8 TSI MQB / EA888.3 engines ​ VWR1200R600E   Trifoam filter     VWR1210R600EM  Trifoam filter / Matte Carbon    VWR1210R600EG  Trifoam filter  / Gloss Carbon     VWR1200R601E  Cotton filterVWR1210R601EM  Cotton filter  / Matte Carbon    VWR1210R601EG  Cotton filter  / Gloss Carbon > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Tiguan II 2.0 TSI 245ps 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > Cupra Leon IV 300 TSI FW 2020+ > Cupra Leon IV 245 TSI FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+   CONFIRMED APPLICATIONS 2.0 TSI MQB / EA888 Gen.3B 190 hp engine with MAF VWR12G7R602  Trifoam filter      VWR1210R602M  Trifoam filter  /  Matte Carbon    VWR1210R602G  Trifoam filter  /  Gloss Carbon     VWR12G7R603  Cotton filter VWR1210R603M  Cotton filter  /  Matte Carbon    VWR1210R603G  Cotton filter  /  Gloss Carbon   > VW Passat 2.0 TSI 190hp B8 2018+ > VW Arteon 2.0 TSI 190hp 2017+ > VW T-Roc 2.0 TSI 190hp 2017+ > VW Tiguan II 2.0 TSI 190ps 2018+ > Audi A3 40TFSI 2.0 TSI 190hp 2016-2020 > Audi TT 40 TFSI 2.0 TSI 197hp 2018+ > Audi Q2 40 TFSI 2.0 TSI 190hp 2017+ > Audi Q3 40 TFSI 2.0 TSI 190hp 2018+ > SEAT Leon III 2.0 TSI 190hp 5F 2018+ > SEAT Ateca 2.0 TSI 190hp 2017+ > SEAT Tarraco 2.0 TSI 190ps 2018+ > Skoda Octavia III 2.0 TSI 190hp 5E 2017-2020 > Skoda Superb III 2.0 TSI 190hp 3V 2019+ > Skoda Karoq 2.0 TSI 190hp 2018+ > Skoda Kodiaq 2018+ > Skoda Kodiaq 2.0 TSI 190hp 2018+

Read more less

STYLE. WITH SUBSTANCE STUNNING CARBON FIBRE LID FOR R600 The RacingLine R600 Intake is the world's most sophisticated and best-selling MQB-platform cold air intake.If you already have an R600, why not add a Carbon Fibre Replacement Lid update to give your existing R600 intake a whole new look.  WHYUPGRADE? If you’re already running an R600 intake, you’ll know that it’s the most sophisticated intake available, combining OEM-standard design & quality with significant power gains.   But there's more good news. This new R600 Carbon Fibre Lid upgrade now gives you a chance to update your existing R600 with a whole new look in the engine bay. A simple replacement for any existing R600 intake lid. Simply unscrew the old lid and replace with the stunning new Carbon replacement. The quality of our carbon weave and finish is second to none. Offered in your choice of either a sophisticated matte finish, or stunning high gloss surface. Each lid is carefully hand-laid using pre-preg carbon fibre - which means we can achieve a smooth internal surface, stunning appearance and perfect fitment. This is supplied as a replacement lid only - to retrofit to any existing R600 intake. SOPHISTICATED MATTE CARBON FIBRE VWR121001 STUNNING HIGH GLOSS​ CARBON FIBRE VWR121000 SIMPLE FIT Fitted in minutes to any existing R600 intake of any age. Simply unscrew the old lid and replace it with the new carbon version. BEAUTIFUL  The exquisite detail of the carbon weave and the flawless surface finish will transform your engine bay appearance. In fact, it's almost a shame to hide it away! STRONG & LIGHT Each R600 lid is carefully hand-laid using autoclaved pre-preg carbon fibre for a strong & light construction with perfect dimensional accuracy. CONFIRMED APPLICATIONS ANY R600 INTAKE FOR 2.0 TSI & 1.8 TSI MQB / EA888.3 / 3B ​ GLOSS LID: VWR121000      MATTE LID: VWR121001 ​ NOTES: This is a lid only, for retro-fitting to any R600 Intake (VWR12G7R600/1/2) of any age. NOTE: this lid does not fit the new MQB 'EVO' intake. The Carbon Lid for this intake is coming soon.

Read more less

Upgraded Boost Hose Kit.For all VWG MQB 2.0 TSI EA888 gen.3 & 3B. Internally wired, stepped internals, reinforced silicone. The RacingLine Boost Hose Kit for 2.0 TSI MQB smooths airflow and optimises routing - for more effective performance in high boost, high temperature use.  What do they do? Welcome to the ultimate Boost Hose Kit for 2.0 & 1.8TSI MQB vehicles. The RacingLine Boost Hose package replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels.   By minimising restrictions, the smoother airflow and optimised routing ensures the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence  Direct OEM replacement: simply remove the old weak, flexible rubber hoses and replace them with our five-piece kit Pressure tested far beyond the turbo’s capabilities, the system maintains performance under extreme temperature and high-boost conditions  Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus non-stepped designs Five piece kit: The RacingLine Boost Hose Kit is probably the only one on the market which comes with five hoses included - however you'll only need to fit four of them.  ​ The choice of which Turbo Outlet Pipe (4a & 4b) depends on whether your car is pre- or post-2017. It's really easy to choose which to use, as it's either long or short depending on what OEM pipe you remove meaning that (unlike other kits) you can't really get this wrong! 1. INTERCOOLER INLET 2. INTERCOOLER OUTLET 3. THROTTLE BODY 4a. turbo outlet pre 2017 4b. turbo outlet after 2017 PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Constructed from internally-wired reinforced high quality silicone, guaranteeing great rigidity to prevent deformation under high boost or heat loads Fluorosilicone interior surface resists oil and gasoline permeation providing extra protection against deterioration  Stainless steel Mikalor-brand clamps reduce the risk of boost leaks with increased connection strength and decreased hose slippage Multi-ply silicone outer construction is hand-wound for performance under extreme conditions, ensuring both heat and burst resistance      INTERNALLY-WIRED INTERCOOLER HOSES Within the kit, our unique super-strength Intercooler Boost Hoses have steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.  CONFIRMED APPLICATIONS 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines ​ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

BILLET OIL DIPSTICK BEAUTIFUL BILLET UPGRADE2.0 & 1.8 TSI EA888 gen.3 Doesn't your pride and joy deserve better than cheap plastic parts in the engine bay?  WHYCHANGE? Our beautiful billet-handled dipstick replaces the cheap plastic of the original. Checking oil level becomes a pleasure! The high-quality rubber o-ring will prevent the risk of leakage from the standard stick. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC 5-axis technology. Polished, then gloss-anodised in Midnight Black to stay beautiful year after year. CONFIRMED APPLICATIONS > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Ibiza Cupra 1.8TSI 6J 2017-2018 > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

Racingline 1.0TSI Inlet & Air Filter Package – EA211 Engines Looking for a simple, upgrade for your 1.0TSI? Together these upgrades allow greatly increased airflow from your intake into the turbocharger for lightning fast turbo response and a worthwhile power gain. The High-Flow Panel Air Filter is now available for cars fitted with the latest 1.0 TSI engine to replace the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam® filter. Put simply, it’s the best Panel Air Filter you can buy. OEM-standards of design, quality, materials and construction, hand-made in the UK. Fits like a factory part; lasts like a factory part. Allow your engine to breathe better and operate more efficiently – improve the engine’s airflow, and power and fuel economy gains will follow. By removing the inevitable restrictions that the standard paper panel filter gives, our Panel Filter allows a small but worthwhile increase in airflow through to the turbo. Confirmed Applications All models fitted with the current EA211 1.0 TSI engine; Volkswagen UP GTI 2016+ Volkswagen UP 1.0 TSI 2016+ Volkswagen Polo 1.0 TSI 2017+ AW Volkswagen Polo 1.0 TSI 2014+ AW Volkswagen Golf 7 & 7.5 1.0 TSI 2015-2020 Volkswagen Caddy 1.0 TSI 2015-2020 Volkswagen T-Roc 1.0 TSI 2017+ Volkswagen T-Cross 1.0 TSI 2017+ Volkswagen Touran 1.0 TSI 2018+ Audi A1 1.0 TSI 2015+ Audi Q2 1.0 TSI 2016+ Audi A3 1.0 TSI 2016+ Seat Ibiza 1.0 TSI 2015+ Seat Leon 1.0 TSI 2015+ Seat Arona 1.0 TSI 2017+ Seats Ateca 1.0 TSI 2016+ Seats Toledo 1.0 TSI 2017+ Skoda Fabia 1.0 TSI 2014+ Skoda Octavia 1.0 TSI 2016+ Skoda Karoq 1.0 TSI 2017+ Skoda Rapid 1.0 TSI 2017+ Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR11UPINTPKG

Read more less