Airtec

TECHNICAL DATA AIRTEC Motorsport front mount intercooler for Audi A4 B7 2.0 TFSI (2005 – 2008) A great upgrade for the standard or modified Audi A4 B7, developed in house at AIRTEC HQ, perfect for fast road and track use. AIRTEC take a huge amount of pride in making sure out kits are finished to an extremely high standard and have a real eye for attention to detail. Features: AIRTEC huge 60mm core intercooler with flowed cast end tanks Pro Hoses high quality 4/5ply silicone hoses Supplied with new, modified crash bar Fitting instructions and all relevant fixings supplied Available in Pro-Series Black or Natural silver AIRTEC 3 year unlimited mileage warranty Fitting will take 2-4 hours depending on mechanical skill Please note: some minor trimming on the back of the fog lamp grills may be required Airtec intercooler sizes Height 340mm Width 680mm Thickness 60mm Gloss Black, Race Red, Performance Blue normally kept in stock. Other colour hoses, made to order Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange, Purple, Vivid Pink, Nitrous Blue, Ultimate Green, Nitrous Blue Please allow 2-4 weeks for delivery.

Read more less

TECHNICAL DATA An great upgrade for your modified S3, Perfect for Fast Road and Track use, As fitted to AIRTEC demo car. The Airtec S3 1.8 Turbo Intercooler kit is reasonably priced but high quality alternative from cheap nasty Ebay kits & more than capable of doing the same if not better job than more expensive Intercooler kits, we take a huge amount of pride in making sure our kits are finished to an extremely high standard and we have a real eye for attention for detail. AIRTEC Front mount Intercooler kit Includes these parts & Features 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler High quality 4/5ply silicon hoses with no joins (Red,Black and Blue) which means better flow inside the pipe work, finished stainless Jubilee clips Stainless horn and ambient temperature support brackets with Airtec logo’s Retains original crash bar ‘requires minor cutting, detailed in instructions’ Retains original fog lights No cutting to bumper Fitting Instructions and all required fixings Requires minor cutting around fog light area of bumper, fog light grilles remain un-cut and detailed in instructions Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Available in Satin Black or Natural Silver Airtec 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Fits all 1.8T S3 (8L chassis) Amd Rolling Road tested results – Stage 1 remap ‘Higher stages of tune will see even bigger gains’ Standard – Temps Into Intercooler 128 degrees & Out of Intercooler 49 degrees, 12 bhp gain in mid range and standard Intercooler kept losing power AIRTEC Intercooler – Temps Into Intercooler 126 degrees & Out of Intercooler 23 degrees. Please note, above test results taken from Seat Cupra R rolling road testing, it uses same intercooler and pipe work as the Airtec S3 intercooler kit, which means you will get the same great results!

Read more less

TECHNICAL DATA Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our Stage 3 front mount intercooler kit with integrated crash bar design (Replaces the stock crash bar) aimed at modified Audi TTRS 8S owners who want the very highest level of cooling efficiency, power and performance for track or fast road use. The finished design features 70mm inlet and outlets that flow freely through custom end tanks into a stepped 100mm – 50mm deep, single-pass core. By integrating the crash bar into the design, the intercooler makes full use of the vehicle’s entire front grille area while still retaining the towing eye feature. It therefore offers a huge increase in surface area and volume over standard, and radically reduces charge temperatures, which is suited for highly modified examples with higher boost pressures and capable of supporting over 500bhp. It fits neatly behind the original bumper, however cutting and trimming is required to fit. The comprehensive kit includes AIRTEC Motorsport’s CAD designed end tanks, laser-cut brackets, and all fixtures and fittings. Its proven cooling efficiency makes it an essential modification for all modified Audi TTRS 8S’. AIRTEC intercooler features: Proven race quality bar and plate core 70mm inlet and outlets CAD designed end tanks to optimise air flow Comes complete with full fitting instructions Proven power increases and cooling efficiency Towing eye feature retained Replacement silicone hose for headlight washer jet Available in Pro Series Black only Please note: Integrated crash bar replaces the stock crash bar – Not declaring modifications can void vehicles insurance. Cutting and trimming is required to fit this kit. Approximate dimensions: W – 627mmH – 375mm Stepped core (Lower section) 100m thickH – 246mm Stepped core (Top section) 50mm thickH – 129mm 70mm outlets. AIRTEC Part No: ATINTVAG39

Read more less

TECHNICAL DATA AIRTEC Motorsport Stage 2 Front Mount Intercooler for Audi TTRS 8S. Available only in Pro-Series Black and either with or without a pre-modified crash bar. Features: 1x Huge 100mm core intercooler Powder coated intercooler support brackets No cutting required Fitting instructions and all required fixings Proven power increased for fast road & track Finished in Pro-Series Black AIRTEC 3-year unlimited mileage warranty   AIRTEC Part No: ATINTVAG38

Read more less

TECHNICAL DATA AIRTEC are proud to introduce the front mount intercooler upgrade for the Audi TT RS (8J). Designed to fit all models, this free-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up. Featuring a huge 120mm core design together with high-flow, cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper and can be used with the original hoses. As with all AIRTEC products, the intercooler was tested back-to-back on the dyno against the OEM item. This showed a huge reduction in air charge temperatures over standard, as seen below: Rolling Road test results – Carried out at AmD Tuning on 11/04/2017 Standard Intercooler: Run 1 – Into intercooler: 117 degrees – Out of intercooler: 69 degrees Run 2 – Into intercooler: 117 degrees – Out of intercooler: 68 degrees Run 3 – Into intercooler: 119 degrees – Out of intercooler: 78 degrees   AIRTEC Intercooler: Run 1 – Into intercooler: 116 degrees – Out of intercooler: 36 degrees Run 2 – Into intercooler: 117 degrees – Out of intercooler: 36 degrees Run 3 – Into intercooler: 118 degrees – Out of intercooler : 37 degrees   The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take around 3-4 hours to complete. The intercooler is available in Pro-Series Black finish, with or without the AIRTEC logo. Please note, the original Audi crash bar will need modifying to fit this intercooler upgrade. If you feel your DIY skills are up to the job, this can be cut yourself. Or we can supply a pre-modified crash bar for a charge of £295.   Option 1: Without optional Crash bar – If your DIY skills are up to scratch, why not give it ago yourself Requires existing crash bar to be cut and welded. Option 2: With Crash bar – Modified Crash bar comes powder coated and pre-cut ready to fit – (£295.00)   Features: Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in Pro-Series Black AIRTEC logo available at no extra charge Unbeatable value for money! Approximate Dimensions: Width: 540mm Height: 215mm Depth: 120mm AIRTEC part no: ATINTVAG19

Read more less

TECHNICAL DATA AIRTEC Motorsport EA888 turbo induction elbow – A simple modification designed to direct and increase air flow into the turbo. The EA888 turbo induction elbow is a much larger diameter, free flowing pipe, designed to replace the small restrictive standard pipe. Works perfectly with our AIRTEC Motorsport induction kit. Features: Larger internal diameterDirect replacement of standard pipeEasy installEnhanced induction noiseIncreased flow for more powerSupplied with new O ringOnly available in pro-series black. AIRTEC Part No: ATMSVAG3

Read more less

TECHNICAL DATA AIRTEC front mount intercooler for the Audi TT 225 only. A great upgrade to any standard or re-mapped Audi TT 225. Comes complete with all alloy hard pipes, Pro Hose silicone hoses and fitting instructions. Comes complete with all alloy hard pipes, Pro silicone hoses and fitting instructions. now only comes in Pro-Series black colour  AIRTEC intercooler sizes: Height 340mm Width 680mm Thickness 60mm Registered Design Right number: 6023257 AIRTEC part no: ATINTVAG14

Read more less

TECHNICAL DATA Freshly developed at AIRTEC Motorsport HQ in the UK, we are proud to launch our front mounted intercooler for the Audi RSQ3 8U with integrated crash bar design (Replaces the stock crash bar).Aimed at modified RSQ3 owners who want the very highest level of cooling efficiency, power and performance for fast road or track use. The finished design offers maximum cooling through our smooth end tanks, into a 90mm thick, single pass core. By integrating the crash bar into the design, the intercooler makes full use of the vehicles entire front grille area. It therefore offers a huge increase in surface area and volume over standard, and radically reduces charge temperatures, which is suited for modified examples with higher boost pressures and capable of supporting over 500bhp. It fits neatly behind the bumper with no modifications required to fit and the comprehensive kit includes AIRTEC Motorsports CAD designed end tanks, laser-cut brackets, and all fixtures and fittings for a direct, bolt-on installation. The proven cooling efficiency and straight forward fitment makes it an essential modification for all modified Audi RSQ3’s. AIRTEC intercooler features: Proven race quality bar and plate core Huge 90mm thick core CAD designed end tanks to optimise air flow Comes complete with full fitting instructions Proven power increase and cooling efficiency Towing eye feature retained Available in Pro-Series Black only Please note: Integrated crash bar replaces the stock crash bar – Not declaring modifications can void vehicles insurance.  Available in Pro-Series Black Only. AIRTEC Part No: ATINTVAG37

Read more less

TECHNICAL DATA As part of our expanding Audi, SEAT, Skoda and VW TFSI product range, AIRTEC Motorsport is proud to launch our intercooler upgrade to offer increased performance through reduced charge temperatures in comparison to the original intercooler. This is particularly important to remapped examples. Our solution to replacing and improving the OEM hugely restrictive twin intercooler setup and lengthy pipework within the confines behind the bumper assembly is based upon a high flow, single-pass core design, that’s wider, taller and deeper than the original. This offers a massive increase in frontal area and a huge increase in capacity, which allows it to make the most of the air flow provided. Despite this improvement, the kit fits neatly behind the original bumper, requires no trimming or cutting, and can be reverted back to standard with no issues. The comprehensive fitting kit includes all the correct fixtures and fittings. The intercooler is available in a Pro-Series Black finish (with or without the AIRTEC logo). And with Black Gloss hoses.  Fitment: Audi A3 2.0 TFSi (197bhp, 8P) Audi S3 2.0 TFSi (265bhp, 8P) Audi A3 1.8 TFSi (8P) Audi TT 2.0 TFSi (200bhp, 8J) Mk2 Audi TTS quattro 2.0 TFSi (270bhp, 8J) Mk2 Audi TT 1.8 TFSi (160bhp FWD 8J) Mk2 SEAT Leon 2.0 TFSi (182bhp, 1P) SEAT Leon Cupra 2.0 TFSi (237bhp, 1P) SEAT Leon Cupra R 2.0 TFSi (265bhp, 1P SEAT Leon FR 2.0 TFSi (197bhp, 1P) Skoda Octavia 2.0 TFSI VW Golf GTi 2.0 TFSI (197bhp Mk5) 1K VW Golf Mk5 GTi 2.0 TFSI VW Golf Mk5 GTi Edition 30 2.0 TFSI VW Golf Mk6 GTi 2.0 TSI VW Golf R Mk6 2.0 TSI VW Scirocco 2.0 TFSI VW Scirocco 2.0 TSI VW Scirocco 2.0 R   DYNO TESTEDTested at Devil Developments rolling road – on Golf Mk5 GTI 2.0 TFSI 200ps with a Stage 1 remap. Data collected was before and after intake temperatures, and power increases. Standard intercooler:Intake Temperature: 46 degreesPower: 239.7bhp AIRTEC Motorsport intercooler:Intake Temperature: 27 degreesPower: 253.4bhp   Dimensions:Width: 450mmHeight: 900mmDepth: 55mm   Features: Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in Pro-Series Black finish AIRTEC logo available at no extra charge Unbeatable value for money! Please note: silicone hoses are only available in black – pictures are purely for presentation processes.  Registered Design Right number: 6023451 AIRTEC Part No: ATINTVAG7

Read more less

TECHNICAL DATA AIRTEC have now released our latest intercooler for the AUDI RS3 8V. We take a huge amount of pride in making sure our kits are finished to an extremely high standard. AIRTEC Front mount Intercooler kit includes these parts & features 1 x huge 100mm core intercooler Powder coated standard intercooler support brackets No cutting to bumper Fitting instructions and all required fixings Un-Beatable value for money Proven power increases for fast road & track Available in Pro-Series Black AIRTEC 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Options: Option 1: Without optional crash bar – Requires existing crash bar to be cut and welded. Can be supplied with laser-cut plate and template. Option 2: With crash bar – New crash bar comes powder coated and pre-cut ready to fit – (Please add £354) Capacity intercooler – 7.97 Litres PLEASE NOTE: This intercooler will NOT fit cars with adaptive cruise control. Silver for illustration purposes only. Registered Design Right number: 6022631 Approximate dimensions: W100 mm/L650mm/H250 mm AIRTEC part number: ATINTVAG18

Read more less

TECHNICAL DATA AIRTEC have released their Audi Sport S1 Front Mount Intercooler upgrade to its growing range of performance intercoolers. Audi have made a great job of shoehorning the 2.0 TSI from the Golf GTI into the small chassis of the S1 Unfortunately, due to the size restrictions of the S1, they have made a huge compromise in the intercooler department and the S1 intercooler is a third of the size found in the Golf GTI. Road tests found the standard intercooler was heat soaking (unable to cool the intake temps from turbo) and temperatures rising to 69 degrees which causes the ecu to pull timing out of the map and means a drop in bhp. With the AIRTEC intercooler upgrade fitted, the intake temps didn’t rise above 24 degree’s which means no loss in bhp. Test taken on standard S1 using Snap-on Ethos. We take a huge amount of pride in making sure our kits are finished to an extremely high standard. Why not make your S1 stand out by choosing Super Stealth satin black for a more OEM look or go for the Silver finish for the maximum impact. Great addition to your standard or re-mapped S1. AIRTEC Front mount Intercooler Features 1 x Huge stepped Intercooler core 80mm bottom section and 60mm top section, with flowed cast end tanks, this means less welding and a stronger Intercooler Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Airtec 3 year unlimited mileage warranty Fitting will take 3-4 hours depending on mechanical skill Fits to standard hoses Finished in Pro-Series Satin Black or Natural Silver, please choose from options Optional Airtec logo Approximate sizes 875mm width 200mm height 80mm/60mm thick Airtec Part No: ATINTVAG15

Read more less

TECHNICAL DATA AIRTEC Front mount Intercooler kit Includes these parts & Features 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler. High quality silicone hoses which means better flow inside the pipe work, finished stainless Jubilee clips. Retains original crash bar. Retains original fog lights. No cutting to bumper. Fitting Instructions and all required fixings. Proven Power Increase’s for Fast Road & Track. Available in Satin Black only  Airtec 3 year unlimited mileage warranty. Fitting will take 2-4 hours depending on mechanical skill. Fits Mitsubishi Colt Stock IC IAT at air filter 30-32*c Relative Humidity 41% Bar Pressure 1012mBar Dyno cell temp 27*c Run1 In 142*c Out 68*c Run2 In 145*c Out 65*c Run3 In 143*c Out 66*c Max pressure drop 0.65psi AIRTEC INTERCOOLER IAT at air filter 31-34*c Relative Humidity 38% Baro Pressure 1011mBar Dyno cell temp 29*c Run1 In 136*c Out 39*c Run2 In 138*c Out 41*c Run3 In 135*c Out 38*c Max pressure drop 1.91psi This is essential for hotter climate countries. Registered Design Right number: 6022642

Read more less

TECHNICAL DATA AIRTEC Motorsport Ultimate-Series Front Mount Intercooler for Nissan R35 GT-R Following an extensive development process spanning the past 2 years, AIRTEC Motorsport are proud to launch its new ultimate-spec large capacity intercooler kit suitable for highly modified Stage 4 and over R35 GT-Rs that require the very highest level of cooling efficiency and performance for track or fast road use.   Our comprehensive kit has been designed, developed and tested in the UK after thorough research. During this time we tried and tested a variety of end tank designs, boost pipe connectors as well as both a tube-and-fin and a bar-and-plate core.   The finished design we chose for optimum performance features 3” formed inlet and outlet pipes that flow freely through custom end tanks into a huge, 110mm deep bar-and-plate core capable of 1,500bhp. The design makes full use of the vehicle’s lower grille area and features an angled air deflector to further aid flow.   It therefore offers a huge increase in surface area and volume over standard, and radically reduces charge temperatures, which is ideal for tuned GT-Rs running increased boost pressures.   The kit fits neatly behind the original bumper but does require modification to the original plastic intercooler surround. The extensive kit is also made up of a 20-piece big boost pipe and hose connector kit, which includes pre-turbo induction pipes and AIRTEC foam air filters, along with all fixtures and fittings needed to install.   Key features: Huge bar and plate core capable of 1,500bhp 3” free flowing inlet and outlets 560mm x 380mm x 110mm core CAD designed end tanks to optimise air flow Comes complete with full fitting instructions Proven power increases and cooling efficiency Available in Pro-Series Black or Natural Silver Please note: Silicone hoses only available in Gloss Black. Choice of different Blow Off Valve (BOV) options available, see below: Option 1: Choose to keep the original (stock) blow off valves Option 2: Upgrade to the Turbosmart Dual Port BOV, an ideal bolt-on performance upgrade to any Nissan GT-R, designed to release higher than factory boost levels, essential for vehicles running stage 4 or above Option 3: We can modify the boost pipe kit with custom flanges to suit your desired BOV setup (Stock, HKS, Greedy, etc). Please contact us when ordering, as additional charges will apply In busy periods, this product could have a 3-4 week manufacturing lead time. MURRAY CLAMPS AVAILABLE FOR AN ADDITIONAL £129.95 INC VAT – PLEASE CALL TO ORDER (Please note, kit is provided with high quality JCS stainless clips as standard) AIRTEC part no: ATINTNIS02

Read more less

TECHNICAL DATA AIRTEC Motorsport front mount intercooler kit for the R35 GT-R, dedicated to offering the best cooling solution to suit up to Stage 4.5 modified GT-Rs. Designed in-house at AIRTEC HQ in the UK, this replacement intercooler kit has been carefully developed to offer a hugely effective upgrade over the original Nissan intercooler. We dedicated a lot of time and effort to testing our kits, and went through several design evolutions during the development stage. As with every product we develop, it was tested first hand on a car in a real-world environment. The development car was originally running Stage 2, but was then upgraded with after adding the AIRTEC intercooler, AIRTEC intakes (soon to be released), Milltek downpipes and 1100cc injectors, backed up with a Stage 4.25 map at GT-R specialist Kaizer Motor. The car made an impressive 667.8bhp with consistently stable charge temps. The comprehensive kit comes with all fittings and fixtures and uses the car’s original mounting points to ensure an easy, direct fit that requires no cutting, drilling or modification. Approximate Dimensions390mm Height565mm Width (not including pipes)100mm Thickness (including end tanks) Registered Design Right number: 6049894 AIRTEC part no: ATINTNIS01

Read more less

TECHNICAL DATA AIRTEC Motorsport are proud to offer the oil cooler kit for the Volvo C30 T5. Long overdue but it’s been worth the wait, making every part of our AIRTEC Motorsport oil cooler kit unique and finished to a stunning level of quality. Grill mounted to achieve maximum cold air flow. Kit Includes. 13 row high performance AIRTEC motorsport oil cooler Aeroquip 90 degree Black anodised fittings with Black Pro-Lite Oil hose Billets anodised Black hose line separators x 2 Gearbox mounted hose securing bracket finished in Pro-Series Black Today’s high performance vehicles pack a lot of power in a smaller package. In order to save both weight and space, the typical OEM cooling system is designed for normal driving conditions. When driven hard for extended periods, the cooling system may prove less than adequate. AIRTEC offers the solution to marginal cooling systems race proven lightweight and efficient oil coolers designed to fit in the smallest practical space. AIRTEC part no: ATOILVOL1

Read more less

TECHNICAL DATA AIRTEC’s front mount intercooler for the Volvo C30 D5, developed in house at AIRTEC HQ, the HUGE 90mm core and smooth flowing end tanks has been tested and proven to lower intake temps. Bolts onto the bottom of the radiator cradle so there isn’t major weight added onto the standard radiator mounts like other alloy intercoolers on the market. Comes with full brackets and all fixtures and fittings included. Available in natural silver or Pro-Series satin black finish for that ultimate stealth look. Still as easy to fit and improved high-flow design.   Approximate dimensions (Not including end tanks): 165mm high 325mm width 90mm thick Registered Design Right number: 6022636 AIRTEC part no: ATINTVOL2

Read more less

TECHNICAL DATA AIRTEC Corsa E VXR stage 3 front mount Intercooler with a great price, reasonably priced but high quality. More than capable of doing the same if not better job than more expensive Intercooler kits, we take a huge amount of pride in making sure our kits are finished to an extremely high standard. Designed for the remapped Corsa E VXR. Comes finished in Pro-Series Black with a choice of Pro Hoses silicone hose colours. AIRTEC Front mount Intercooler kit Includes these parts & Features 1 x Huge 90mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler High quality 4/5ply silicon hose’s with alloy joiners & stainless Jubilee clips Powder coated standard intercooler support brackets Retains original fog lights without any modification Very minor trimming to back of bumper Fitting Instructions and all required fixings Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Available in Satin Black AIRTEC 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Core dimensions: 595mm wide 210mm high 90mm thick Only available in Pro-Series Black AIRTEC part no: ATINTVAUX14

Read more less

TECHNICAL DATA AIRTEC has now added a great addition to its range of products in the way of this intercooler for the Astra Mk6 J 1.6 Turbo AIRTEC front mount intercooler features: 1 x Huge 70mm Intercooler core, with flowed cast end tanks, this means less welding and a stronger Intercooler Air-ram scoop which forces cold air directly into the intercooler core Comes complete with alloy pipes and silicon hoses, includes stainless jubilee clips Un-Beatable value for money Proven power increase for Fast Road & Track builds Available in Pro-Series Black AIRTEC 3 year unlimited mileage warranty Fitting will take 3-4 hours depending on mechanical skill We have an intercooler kit available for both Astra J 1.4 & 1.6 GTC AIRTEC part no: ATINTVAUX6

Read more less

TECHNICAL DATA AIRTEC Motorsport Astra H VXR engine breather kit. Simple bolt on design that takes less than 30 minutes to install. Can be fitted with standard hoses or add our optional extra Pro Hoses silicone hoses. Kit includes: All fittings and fixtures required to fit 1x breather tank 1x fitting guide 2x OPTIONAL silicone hoses Gloss Black, Race Red, Performance Blue normally kept in stock. Other colour hoses, made to order Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange, Purple, Vivid Pink, Nitrous Blue, Ultimate Green, Nitrous Blue Please allow 2-4 weeks for delivery.

Read more less

TECHNICAL DATA AIRTEC Motorsport gearbox breather kit for Astra H MK5 VXR, simple bolt on design. Designed to reduce oil temperature, increasing the life of the oil and gearbox. Supplied with all necessary fittings, fixtures and fitting instructions. Kit includes: All relevant fittings / fixtures1x Breather tank1x Breather filter1x Gearbox barb fitting1x -8 Oil cooler hose1x Pro Hoses silicone hose Only available with Gloss Black hoses.

Read more less

TECHNICAL DATA AIRTEC Motorsport oil cooler kit for Astra H VXR.Designed and developed in house at AIRTEC HQ this makes our oil cooler kit unique and finished to a stunning level of quality.Grill mounted to achieve maximum cold airflow and fits either side of grill as not to affect cold air feed for air filters. Kit Includes. 13 row high performance AIRTEC motorsport oil cooler Aeroquip -8 90 & 45 degree Black anodised fittings with Black Pro-Lite Oil hose Gearbox mounted hose securing bracket finished in ProSeries Black Designed to fit with AIRTEC stage 3 intercooler & supplied with a bracket for cars running standard or other aftermarket intercooler!Today’s high performance vehicles pack a lot of power in a smaller package.In order to save both weight and space, the typical OEM cooling system is designed for “normal” driving conditions.When driven hard for extended periods, the cooling system may prove less than adequate.AIRTEC offers the solution to marginal cooling systems—race proven lightweight and efficient oil coolers designed to fit in the smallest practical space.

Read more less

TECHNICAL DATA AIRTEC Motorsport turbo cooler for Astra H VXR. Ideal for fast road and race!Designed to help cool the super heated water which comes out of the turbo before it goes back into the water header tank. By fitting a turbo cooler you are increasing efficiency of your cooling system, in return will help lower engine temperature Complete with full fitting instructions for an easy install. Features: 1x AIRTEC turbo cooler 2x Pro Hoses silicone hoses 1x Fixing bracket 1x Fitting instructions All relevant fixings / fixtures

Read more less

TECHNICAL DATA AIRTEC Motorsport induction kit for Astra H MK5 VXR with KO6 / KO6 hybrid turbo setup.Supplied with the AIRTEC branded filter, the kit includes an alloy pipe and 2 Pro Hoses silicone hoses.Silicone hoses in a choice of 10 different colours.Motorsport ‘Satin silver’ or Pro-Series black hard pipes. Kit includes:1x intake pipe2x Silicone hoses1x AIRTEC branded filter   Now available in just all black! Please allow 2-4 weeks for delivery.

Read more less

TECHNICAL DATA Airtec has released their Astra h 1.6 Intercooler with a great price, reasonably priced but high quality alternative from cheap nasty Ebay kits & more than capable of doing the same if not better job than more expensive Intercooler kits, we take a huge amount of pride in making sure our kits are finished to an Extremely high standard. AIRTEC Front mount Intercooler kit Includes these parts & Features 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler High quality 4/5ply silicon hose’s with alloy joiners & stainless Jubilee clips Powder coated standard intercooler support brackets Retains original fog lights without any modification No cutting to bumper Fitting Instructions and all required fixings Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Available in Satin Black or Natural Silver Airtec 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Registered Design Right number: 6046415 AIRTEC part no: ATINTVAUX12

Read more less