Airtec

Help your 1.0 EcoBoost get a much Air into the engine as possible! Transform your 1.0 EcoBoost engine bay, larger diameter pipe-work combined with AIRTEC induction kit means louder waste-gate chatter, similar to Focus RS Mk2  Features Swaged ends so induction pipes can't blow off Silver mandrel bent alloy pipe work Uses original fixing points Focus 1.0 engine cover can still be fitted Increased induction noise AIRTEC induction kit recommended Fits: MK7 Fiesta 1.0 EcoBoost All Models MK3 Focus 1.0 EcoBoost All Models MK8 Fiesta 1.0 EcoBoost All Models (Front Turbo Only)

Read more less

The new design Stage 2 induction kit that works perfectly with the standard Focus ST 250. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off  Features. Removes ugly original plastic & restrictive airbox Adds power and torque,  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Adds style to your engine bay Easy fitting Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard quickly (warranty)

Read more less

  The new design Stage 3 induction kit that works perfectly with the standard Fiesta ST180. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features. Removes ugly original plastic & restrictive airbox Replaces bigger silicone hoses with hard pipes Adds more power and torque,  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield Adds style to your ST engine bay Easy fitting, takes less than 15-20 minutes to install Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) AS good AS it gets. Comes with 24 month warranty 'conditions apply' Will fit Fiesta ST 200 Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering! 

Read more less

AIRTEC high-flow turbo hard pipe for the Fiesta 1.0 EcoBoost improves the pressure drop across the charge system, improving the efficiency of the engine and improving the ability for additional performance to be added. Made with high quality stainless steel. The AIRTEC turbo hard pipe will improve airflow and turbo noise (dump valve pshhh) Features: High quality hard pipe Easy to fit Compatible with all Fiesta 1.0 EcoBoost models, Mk7 & Mk8 – 100PS, 125PS, 135PS, 140PS (Limited, Red & Black, 164 models).

Read more less

  Big boost pipe kit for the Fiesta ST 180. The kit includes: 3 hard pipes, 4 Pro Hose silicone hoses & free jubilee clips. This kit is designed for the modified fiesta ST 180. All pipes have swayed  ends to stop the pipes blowing off. Available with or without symposer take off. Please note: If fitting with the AIRTEC Motorsport Stage 2 intercooler, please make a note in the shipping notes – Additional hose required.     2.5" bore pipework. only available in black pipe and black hose Will fit Fiesta ST 200

Read more less

AIRTEC Fiesta ST 180 top induction pipe. Replace your standard Fiesta ST 180 plastic top induction pipe with our AS performance alloy top pipe. Available in Pro Series Black or Satin Silver. Can be fitted with our Stage 2 induction kit. Choose from a wide range of silicone hose colour. Please note: Custom colours are made to order, please expect a 5-7 day delay on custom colours. Peak show times may be a longer 7-10 day delay. WILL FIT ST180 & ST 200.

Read more less

The 2.5" big boost pipe kit is a must for all remapped STs, Everything you need is included in the kit. Features: Hot side (turbo to intercooler) is made from 2.5" light-weight alloy and connected with Pro Hoses 5 ply silicone hose joiners. NEW! Now comes with 3 pce cold side Please Note: This is a Symposer Delete Item Will fit With the following intercoolers: AIRTEC Pace Pro-Alloy Forge Ford OEM Direct replacement! No modding required. Our 2.5" hard pipe upgrade removes Ford's 2.0" restrictive boost pipes and can see 'bolt on power'.   This kit is designed for BIG BHP / Remapped Focus ST's. All pipes have swaged ends to stop the pipes blowing off on higher power cars. Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay. Fitting takes 1 - 2 hours. Due to high demand please allow 7-10 day delay before delivery. Pipework only available in pro-series black (silver for picture purpose only) - Hoses now in black only!

Read more less

The Ultimate alloy Turbo top induction pipe Mirror finish , the ultimate finishing touch to any engine bay! Now available in 3 different finishes, Pro-Series Satin Black, Polished Silver and the new Satin Silver (Motorsport Style Finish) Fitting takes about 20-30 minutes Registered Design Right number: 6033438

Read more less

AIRTEC Motorsport hot side lower boost pipe for Fiesta ST 180. Designed to increase airflow on the Fiesta ST 180 as a replacement of the restrictive standard boost pipe, the AIRTEC Motorsport hot side boost pipe creates a much smother air flow by replacing the restrictive bends and smaller diameter pipe. Features: Swaged ends to prevent blowing of on bigger power cars. Will work perfect with standard or re-mapped Fiesta ST's. To fit with both, stock and AIRTEC intercooler. Resonator delete. Fitting takes less than 30 minutes to install and fits to standard boost hoses. 52mm pipe throughout, compared to the restrictive 42mm resonated standard pipe. AVAILABLE ONLY IN BLACK FINISH

Read more less

The new design Stage 2 induction kit that works perfectly with the standard Focus RS MK3 Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features. Removes ugly original plastic & restrictive airbox Adds power and torque,  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Adds style to your engine bay Easy fitting Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard quickly (warranty) Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering! 

Read more less

NOW ONLY AVAILABLE IN ALL BLACK AIRTEC Motorsport cold side boost pipe to fit Fiesta ST180/ST200 Please note, this item is a symposer DELETE only – Now only available in Pro-Series Black TECHNICAL DATA AIRTEC Motorsport cold side boost pipe to fit Fiesta ST180 / ST200 Kit includes: 1 hard pipe, 2 Pro Hoses silicone hose & free jubilee clips. This kit is designed for the modified Fiesta ST. All pipes have swaged ends to stop the pipes blowing off. 2.5″ bore pipework. Comes in Pro-Series Black Please note, this item is a symposer DELETE only – Now only available in Pro-Series Black AIRTEC part no: ATMSFO78

Read more less

AIRTEC Motorsport hot side lower boost pipe for Fiesta MK8 ST-200   Designed to increase airflow on the Fiesta MK8 ST-200 as a replacement of the restrictive standard boost pipe, the AIRTEC Motorsport hot side boost pipe creates a much smother air flow by replacing the restrictive bends and smaller diameter pipe.   Features: Swaged ends to prevent blowing of on bigger power cars. Will work perfect with standard or re-mapped Fiesta ST's. To fit with both, stock and AIRTEC intercooler. Resonator delete. Fitting takes less than 30 minutes to install and fits to standard boost hoses.   52mm pipe throughout, compared to the restrictive 42mm resonated standard pipe. AVAILABLE ONLY IN SILVER FINISH Registered Design Right number:

Read more less

As part of our development programme for the latest Mk4 Focus ST model , we’re proud to release our larger top induction pipe upgrade. TECHNICAL DATA AIRTEC Motorsport Top Induction Pipe for Focus ST MK4 As part of our development programme for the latest Mk4 Focus ST model , we’re proud to release our larger top induction pipe upgrade. A direct replacement for the original item, our lightweight, two-piece alloy pipework features a larger internal diameter to help increase air flow passing through. It connects using three high-quality Pro Hoses silicone joiners and comes in a powder coated black finish. A great upgrade for any modified Mk4 ST, the comprehensive kit also includes all fixtures and fittings, including a detailed fitting guide. AIRTEC part no: ATMSFO122

Read more less

  AIRTEC Motorsport induction pipe for the Focus MK3 RS. High flow crossover pipe designed to help increase airflow, available in pro series satin black or motorsport finish satin silver. This option is for vehicles that want to retain the look of the standard airbox. Can be fitted with uprated air filter. Features: AIRTEC Motorsport crossover pipe Optional 2 pice silicon hose kit Easy DIY installation Hose available in 10 different colours Optional extra 2 piece silicon hose kit available  Crossover is black - silver is no longer available

Read more less

As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our big boost pipe kit for the ST suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original pipework to allow more flow and capacity whilst reducing restriction and improving response. AIRTEC Part No: ATMSFO132 TECHNICAL DATA As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our big boost pipe kit for the ST suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original pipework to allow more flow and capacity whilst reducing restriction and improving response. The comprehensive 11-piece kit features three pipes constructed from lightweight aluminium for improved strength so they will not fail with higher boost pressure, six Pro Hoses silicone joiners as well as two CNC-machined connectors to make fitting as simplistic as possible. On the hot side coming from the turbo, the original pipework is 55mm and features an indented section which restricts flow, where as our enlarged replacement kit features a 60mm internal diameter from start to finish with no restrictions. For the cold side to the throttle body, the original pipework begins at 55mm and tapers to 63mm in diameter, but out replacement features a 63mm internal diameter throughout, increasing both flow and capacity. The kit requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions. A must have for any modified Mk4 ST to help the improve the boost pipework’s flow and efficiency. Features: • Comprehensive 11-piece kit designed specifically for the Mk4 Focus ST• Larger internal diameter pipework offers improved flow• Lightweight aluminium construction for increased strength• Precision engineered CNC connectors• Comes complete with all fixtures and fittings   AIRTEC Part No: ATMSFO132

Read more less

The 2.5" big boost pipe kit is a must for all remapped RSs, Everything you need is included in the kit. Features: Hot side (turbo to intercooler) is made from 2.5" light-weight alloy and connected with 5 ply silicone hose joiners. NEW! Now comes with 70mm coldside hose to fit standard size throttle body expanding up to 70mmPlease Note: This is a Symposer Delete Item Will fit With the following intercoolers AIRTEC Pace Pro-Alloy Forge Ford OEM Direct replacement! No modding required. Our 2.5" hard pipe upgrade removes Ford's 2.0" restrictive boost pipes. We saw gains of 11.8 bhp & 9 lb/ft torque increases over the standard Ford pipes and these gains were achieved by simply bolting on the kit.    This kit is designed for BIG BHP Focus RS' and will work best on 375bhp and over. All pipes have swaged ends to stop the pipes blowing off on BIG BHP Focus RS'.  Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay. Choose from options throttle body size:Standard Throttle Body  (63mm)Uprated Throttle Body (70mm) Fitting takes 1 - 2 hours. Please note: For Focus ST 225 - MUST Be fitted with 2.5" outlets on intercooler. Stock ST is 2".Will NOT fit Focus ST Stage 1/2 intercooler. WILL fit focus ST Stage 3 intercooler. Please Note: Pipework only available in pro-series black (not silver)

Read more less

AIRTEC Motorsport Enlarged Induction Pipe for Honda Civic FK8 Type R A direct replacement part that offers increases in performance and response as well as sound and aesthetics, the enlarged induction pipe features a 10mm larger inlet, wider outlet and increased overall internal volume to reduce restriction and improve flow to the turbo. AIRTEC part no: ATMSFK803 TECHNICAL DATA AIRTEC Motorsport Enlarged Induction Pipe for Honda Civic FK2 & FK8 Type R. As part of our expanding Honda Civic FK8 Type R product range, AIRTEC Motorsport is proud to launch our enlarged induction pipe suitable for track or fast road use. A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a 10mm larger inlet, wider outlet and increased overall internal volume to reduce restriction and improve flow to the turbo. Made from high quality cast aluminium for a factory look and feel, the larger pipe also features a cast AIRTEC logo in silver and powder-coated black finish for a subtle OEM+ look. The kit includes a silicone reducer to use with a standard air box as well as a straight silicone connector to use with an uprated induction kit, such as our AIRTEC Motorsport kit. The comprehensive installation kit includes all fixtures and fittings and detailed instructions. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification.   Dimensions: Civic OEM induction pipe IN: 62mm OUT: 59mm AIRTEC Motorsport induction pipe IN: 72mm OUT: 60mm   Specification: Direct replacement part Made from high quality cast alloy AIRTEC cast logo in silver Powder-coated black finish Improves air flow to the turbo Increases mid-range performance Includes all fixtures and fittings Features detailed fitting guide Fits both, FK2 & FK8 Civic Type R. Registered Design Right: 6154867 AIRTEC part no: ATMSFK803

Read more less

SUPPLIED WITH BLACK PIPEWORK AND BLACK SILICONE AIRTEC Motorsport big boost pipe kit for the MQB EA888 platform. Designed to increase power and torque figures by replacing the standard restrictive boost pipes and improving flow. Registered Design Right number: 6046416 Please note: designed to fit onto original OEM size intercooler outlets AIRTEC part no: ATMSVAG4 TECHNICAL DATA AIRTEC Motorsport big boost pipe kit for the MQB EA888.3 platform. Designed to increase power and torque figures by replacing the standard restrictive boost pipes and improving air flow. With larger internal diameters on the pipework, less restriction means a smoother air flow and an increase of power. Kit comprises of smooth larger, mandrel bent hard pipes and is supplied with a full set of Pro Hoses silicone hoses including from the turbo outlet to the hot-side boost pipe. The AIRTEC big boost pipe kit is designed as a direct replacement of the OEM parts, eliminating restrictions found on the stock charge pipe while allowing enough clearance from engine parts, increasing performance in the process. We have designed the kit using 63mm hot-side pipework to keep air speed high and reduce the effects of turbo lag on big power cars. For the cold-side pipework this increases to a massive 70mm to ensure maximum air flow and volume is achieved at the throttle body to maximise performance. PLEASE NOTE: Intercooler NOT included, big boost pipe kit ONLY. Also supplied with new stainless steel jubilee clips. Fits the following vehicles: Volkswagen Golf Mk7/7.5 R – 2.0 TSI Volkswagen Golf Mk7/7.5 GTI incl. Clubsport and Clubsport S – 2.0 TSI Seat Leon Cupra 265/280/290/300 – 2.0 TSI Seat Leon – 1.8/1.9/2.0 TSI Audi S3 8V (Hatchback and Saloon variants) – 2.0 TSI Audi TTS 8S – 2.0 TSI Audi TT 8S – 1.8/2.0 TSI Audi A3 8V – 1.8/2.0 TSI Audi S3 8V 2.0 TSI Audi TT/TTS 2.0 TSI Skoda Octavia vRS 1.8/2.0 TSI VW Golf MK7 / All road / Sportwagenn 1.8/2.0 TSI VW Golf GTi/R 2.0 TSI Please note: designed to fit onto original OEM size intercooler outlets Registered Design Right number: 6046416 AIRTEC part no: ATMSVAG4

Read more less

AIRTEC Motorsport cold side boost pipes for Renault Clio 200 / 220 EDC. To replace the standard plastic pipes, known to fail! Features of cold side: Bigger diameter pipe onto the throttle body, AIRTEC pipe 63.5mm compared to standard 60mm. To replace the standard plastic pipes known to fail due to heat soak, standard pipes are known to blow off and cause a loss of boost. Will fit all intercooler kits, designed to follow standard path. Registered Design Right number: 6030033

Read more less

TECHNICAL DATA Why not add top alloy boost pipe kit for just £129.95 which includes 2 x alloy boost pipes, 1 x silicone joiner and stainless jubilee clips. Fits Citreon DS3, Peugeot 207 GTI, Peugeot 208 GTI. Part no: ATINTP&C4

Read more less

As part of our expanding Fiesta ST180 product range, AIRTEC Motorsport are proud to launch our RS-style 76mm top induction pipe suitable for track or fast road use. Inspired by the design of our Focus RS top induction pipe, we’ve created a large, free flowing pipe that joins the turbo inlet to the intake with a substantial increase in overall internal volume to reduce restriction and improve flow. A direct replacement part for the ST180, it offers increases in performance and response, as well as sound and aesthetics. Made from high quality aluminium for an improved look and feel, the pipe maintains a constant 76mm internal diameter throughout, compared to the 70mm standard item, and features a design with less bends and restrictions. It also features an AIRTEC plaque and is available in a powder-coated black finish for a subtle OEM+ look. The comprehensive package includes Pro Hoses silicone connectors and fixtures and fittings, which makes installation a simple task. There is also the option to add an AIRTEC Motorsport induction kit, featuring an aluminium intake pipe with billet MAF sensor boss, laser cut shield and a choice of a cotton of foam air filter. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification for modified cars. Features: Comprehensive kit designed specially for the ST180 platform Optional induction kit with laser cut shield and cotton or foam filter Improved soundtrack and under bonnet aesthetics Huge improvement to turbo air flow Made from lightweight aluminium Long lasting, high quality black powder coat finish AIRTEC Motorsport plaque Includes all fixtures and fittings AIRTEC Part No: ATMSFO131

Read more less

TECHNICAL DATA Great addition to your ST, Fits all Pre-Face lift and Face lift models Deep induction note & lots of waste gate chatter No worrying about water ingress on low level filters, which is a concern for some ST owners Not content with fitting a huge group a cone filter we have also added a cold feed scoop which can aid Airflow into the filter & also doubles up as a protection if you have RS vents fitted Please Note: Kawasaki Green is a brighter Green than Ultimate Green (FRS Green) Kit includes 1x Huge Group ‘A’ style cone filter 1x AS performance 80mm trumpet with cold feed scoop ‘powder coated satin black’ 1 x Pair of custom made silicon Pro-hose joiners ‘stainless clamps included’ AIRTEC two-piece ECU cover is required to fit this filter kit Add AS Alloy top induction pipe Please note, now supplied with AIRTEC Motorsport Black Cotton Filter.  Part No: ATIKFO9

Read more less

A direct replacement part that gives increases in response and sound by eliminating the internal sound resonators built into the original boost pipe from the turbo.  The manufacturer fits these resonators to reduce noise and quieten the tone, but by replacing the pipe for one without the baffled internals, flow is improved, as well as noise. This increases throttle response and heightens the soundtrack from within the car. The pipe is made from high-quality aluminium to fit the original fittings and is finished in powder coated black or metal silver. The installation package includes all fixtures and fittings, as well as detailed installation instructions. With valuable performance gains and an improved soundtrack, the AIRTEC Motorsport de-res pipe kit is an essential modification Will fit Ford 1.6 TDCI engines including Focus MK3 1.6 & Transit M Sport Connect. Features: Increases response and sound Improves flow from turbo Direct replacement fitment High quality aluminium construction Powder coat black or metal silver finish Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSFO70

Read more less

AIRTEC Motorsport Lower De-Res Pipe for Focus MK3 ST-D Designed to increase airflow on the Focus MK3 ST-D as a replacement of the restrictive standard boost pipe, the AIRTEC Motorsport boost pipe creates a much smoother air flow by replacing the restrictive bends and smaller diameter pipe. AIRTEC Part No: ATMSFO120 TECHNICAL DATA AIRTEC Motorsport Lower De-Res Pipe for Focus MK3 ST-D Designed to increase airflow on the Focus MK3 ST-D as a replacement of the restrictive standard boost pipe, the AIRTEC Motorsport boost pipe creates a much smoother air flow by replacing the restrictive bends and smaller diameter pipe. Features: Swaged ends to prevent pipes working loose on bigger power cars. Will work perfectly with standard or re-mapped STs. To fit with both, stock and upgraded AIRTEC intercooler. Resonator delete. Fitting takes less than 30 minutes to install and fits to standard boost hoses. 47mm pipe throughout. Available in Pro-Series Black. AIRTEC Part No: ATMSFO120

Read more less