All

Forge Motorsport Boost Tap for the Ford Mustang 2.3 Ecoboost and the Mk3 Focus RS. This adaptor plate is installed between the boost (MAP) sensor and the mounting surface. This allows a tap to run a vacuum operated valve or for connection to a boost gauge.   In the box:1 x Vacuum tap1 x Allen Cap Bolt10 x Cable Ties1 x 3000mm of 4mm Vacuum Tube

Read more less

This is a piston design recirculation valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves but also benefits from its ability to be fitted with different springs when the boost pressure has been increasded or the engine has been modified.    In The Box:1 x FMDVCS14R Valve1 x Uprated Yellow Spring1 x Forge Sticker FITS: ChevyCruze 1.4 TurboSonic 1.4 TurboFordFocusRS MK3VauxhallAdam2014 Onwards (1.4T)AstraJ (2009-2016)2011-2015 (1.4T)Cascada2012-2018 (1.4T)CorsaD (2010-2015)2012-2015 (1.4T)E (2015 Onwards)(1.4T 2015 Onwards)Insignia2008-20142011-2014 (1.4T)Meriva2010-2017 (1.4T)Mokka2012-2017 (1.4T)Zafira2011-2019 (1.4T)

Read more less

Forge Motorsport turbo wastegate actuator for the Ford Focus RS Mk3 Produced in house with our modern CNC machinery ensures the body and stainless steel rod with fittings provides a perfectly fitting serviceable and upgradeable replacement part. This wastegate actuator is assembled with a predetermined actuator spring suitable for or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request. Please contact us directly concerning this process and we will be happy to help with your requirement. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Please Note: The pressure figures listed in the drop down menu above are minimum regulated pressure figures. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure

Read more less

This part replaces the stock white plastic filler, blue lid and plastic tube that leads to the main washer bottle in the inner wing, as they look a little out of place in the engine bay. The filler is replaces by an aluminium spun bottle with a Forge cap, and the tube is replaced with our own silicon hose. This product will fit: VW Scirocco, Golf Mk5 (2004+) Mk6 (2009+), Jetta, Touran, Caddy and Eos Seat Leon/Leon 4 (2006+), Altea (2004+) and Toledo (2005+) Skoda Octavia (2004+) and Superb (2008+) Audi A3/S3 (2004+) Fits Multiple Cars

Read more less

The much loved 1.8T engine has proved itself as being not only being very capable in producing high power figures but in being very reliable at the same time. The key to this reliability is the lubrication system, which can quickly become overwhelmed when cars are driven quickly - or on track - causing oil starvation. Under extreme acceleration, braking or cornering, the oil can momentarily run out of the sump under centrifugal force, causing a temporary starvation through the oil-ways, putting critical bearings and bores at risk of damage.For those with bottomless pockets, a ‘dry sump’ system is the ideal preventative solution. But for those in the real world, our neatly engineered solution, based around a brand new OE-spec sump pan is the perfect alternative. Carefully configured baffles and Viton oil control valves ensure that the lubricant can easily move around the engine, but retains a minimum sump capacity, even under the most severe of ‘g’ forces. The relatively soft Viton plates react far quicker than equivalent metal flaps - which are often used on lesser alternatives - and have been designed to withstand the rigours of the high temperatures of oil and its contaminants.Our 1.8T Baffled Sump (FMBSMP18T) is a truly effective upgrade. An essential item for any race, track or tuned car its makes a sensible investment. It’s certainly cheaper than an engine rebuild! Our baffled sump comes complete with an oil level sensor blanking plate if you do not have a sensor fitted.   Fits Multiple Cars

Read more less

This valve kit is for VAG vehicles equipped with the 1.4 TSI twincharged (supercharged and turbocharged) engines that have the electronically controlled bypass valves (2 bolt fitting). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures of the OEM valve, that have occurred. Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.   In The Box:1 x FMDVATSI Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x 2000mm Length of 4mm Vac Hose1 x Vacuum Tap2 x M5 x 35 Self Tapper Screw1 x Uprated Blue Spring10 x Cable Ties1 x M5 x 12 Socket Button Screw1 x M5 Nyloc Nut1 x Instructions1 x Forge Keyring and Sticker

Read more less

This actuator is compatable with the VAG 1.4 Twincharged engines found in the Audi A1, Seat Mk5 Ibiza / Bocenegra, Skoda Fabia and Volkswagen Polo. This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Please Note: The pressure figures listed in the drop down menu above are minimum regulated pressure figures. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. Please note some 1.4 TSI twin-charged 160 BHP models have an electronic OE actuator and this Forge Motorsport vacuum operated actuator is not a compatible replacement for the electronic type. The majority of models associated VAG models are fitted with the vacuum type but please check to ensure your engine has the vacuum type before ordering the Forge Motorsport product we offer.   In The Box:1 x FMACVAG07 Actuator1 x Forge Sticker   For Multiple Vehicles

Read more less

This valve kit is for VAG vehicles equipped with the 1.4 TSI twincharged (supercharged and turbocharged) engines that have the electronically controlled bypass valves (2 bolt fitting). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures of the OEM valve, that have occurred. Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.   In The Box:1 x FMDVRTSI Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x Skoda Vacuum Tap2 x M5 x 35 Self Tapper Screw1 x Uprated Blue Spring10 x Cable Ties1 x 2000mm Length of 4mm Vac Hose1 x M5 x 12 Socket Button Screw1 x M5 Nyloc Nut1 x Instructions1 x Forge Keyring and Sticker   For Multiple Vehicles

Read more less

Yet another first for Forge Motorsport! This valve kit allows the fitment of a fast response blow off valve on the 1.2 TSi engine CBZA, CBZB and CBZC as found in the Seat Ibiza, Toledo, Altea, Leon, the VW Polo, Caddy, New Beetle, Jetta, Touran, Golf, the Skoda Yeti, Fabia, Octavia, and the Audi A1 and A3. As the engine does not have a diverter valve fitted as standard, this valve not only gives you an incredible loud sound when lifting off the throttle during gear changes, but will also improve the throttle response by reducing any lag, as it will help the turbocharger maintain its rotational speed ready for when you accelerate. Please select the valve and hose colours using the options above.   In The Box:1 x FMDV12VAG Valve1 x Vacuum Tap, Gasket and Screws2 x M6 x 16 Socket Cap Screws1 x Machined Aluminium Coupler1 x Uprated Blue Spring2 x Cable Ties1 x Silicone Hose2 x Hose Clamps1 x Instructions1 x Forge Sticker

Read more less

This actuator is designed for the Ford Focus RS or ST models Please note: There are two types of actuator available for this vehicle, either with a straight rod or a bent rod. The two versions are not interchangable. For this reason, prior to ordering you should ascertain which version you require. When ordering please identify your requirement in the options menu. The actuator is supplied with no replacement bracket ,you will need to reuse your original factory bracket to fit the Forge actuator. This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process.It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Please Note: The pressure figures listed in the drop down menu above are minimum regulated pressure figures. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure.  In The Box:1 x FMACFRS Actuator1 x Forge Sticker

Read more less

A replacement turbo actuator for the Ford Focus ST250. This product is built with a predetermined actuator spring suitable for at or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Please Note: The pressure figures listed in the drop down menu above are minimum regulated pressure figures. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure.   In The Box:1 x FMACST250 Actuator1 x Forge Sticker

Read more less

A remote Blow off, or Dump Valve Kit for the Ford Focus Mk2 ST225. This uses a twin piston valve to ensure compatibility with the engine management system and a custom silicone hose to ensure easy installation. This valve can be installed in combination with the OEM valve, or on it's own by using one of our blanking plates. The hose is available in red, blue, or black, and the valve is available in black. Please select your choice from the options above.   In The Box:1 x FMFOCSTDV Valve1 x 35mm Hose Clamp1 x 50mm Hose Clamp1 x 500mm of 4mm Vacuum Tube1 x 5mm T Piece1 x Silicon Hose #10221 x Instructions1 x Forge Sticker

Read more less

This is a piston design recirculation valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm valves (OEM) but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified. To ease installation the top or vacuum connection is angled. This part first the Ford Focus ST225 and ST250   In The Box:1 x FMDVK04S Valve1 x Uprated Yellow Spring1 x Forge Sticker

Read more less

This valve is for the turbocharged 1.6-litre EcoBoost petrol engine found in the Fiesta ST. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade, Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve, that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.    In The Box:1 x FMDVST180 Valve1 x FMBGFK4 Boost Tap and Bolt1 x Solenoid, Bracket and Screws1 x Blue Spring (Uprated)1 x Wiring Harness2 x Posi-taps10 x Cable Ties1 x 2000mm Length of 4mm Vacuum Hose1 x Forge Key Ring and Sticker1 x Instruction Booklet

Read more less

This Recirculating valve is for the turbocharged 1.6-litre EcoBoost petrol engine found in the Fiesta ST. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade, Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve, that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.    In The Box:1 x FMDVST180 Valve1 x FMBGFK4 Boost Tap and Bolt1 x Solenoid, Bracket and Screws1 x Blue Spring (Uprated)1 x Wiring Harness2 x Posi-taps10 x Cable Ties1 x 2000mm Length of 4mm Vacuum Hose1 x Forge Key Ring and Sticker1 x Instruction Booklet

Read more less