All

Turbosmart ALV 5-1 Weld Flange The Turbosmart 5 Outlet Weld Flange is essential for those racing enthusiasts wanting to install ALV on a 5 or 10 cylinder engine.  Turbosmart Product Code: TS-0550-3104 Need to Learn More? AET Motorsport are the official UK and Ireland distributor of Turbosmart products. If you have any questions regarding this Weld Flange then please don't hesitate to get in contact with a member of the team. Require a Fitting? Please refer to the Fitting Instructions HERE for any fitting enquiries that you may have. Call or Email to discuss: Tel: 01924 228042  |  Email: info@aetmotorsport.com

Read more less

 Replacement -3AN Banjo Nipple for Turbosmart Plumb Back, Dual Port, Vee Port Pro, and Supersonc BOVs, and well as the IWG75 range of Actuators.

Read more less

Shop the Turbo Actuator Garrett Unit for your Abarth 595 at AET Motorsport with fitting available at our workshop in Normanton. Contact the team to discuss more. Call or Email to discuss: Tel: 01924 228042 | Email: info@aet-motorsport.co.uk

Read more less

Turbosmart Gen-V ALV40 (Anti-Lag Valve) The fifth generation of the Turbosmart Anti Lag Valve has been specifically designed to maintain the turbo speed between gear changes and off the throttle cornering.  Diverting the incoming air safely into the exhaust manifold pre-turbine wheel, the Anti-Lag Valve allows for safer spooling of the turbocharger without causing any throttle damage to your vehicle. Boasting a 40mm valve diameter with a purpose designed actuator housing, the sealed twin chamber design is designed to open under vacuum conditions which allows the air to bypass into the exhaust manifold.  Due to the large variety of engine applications, an outlet weld flange is required. This will need to be purchased separately.   Full Anti-Lag Valve Package Includes: Turbosmart Gen-V ALV Valve Seat Inlet V-band Clamp Inlet Hose Adapter 1-1/2" OD Outlet V-Band Clamp Inlet Weld Flange 1-1/2" OD Collar Tool Fitting Kit Inlet O-ring Learn more about the Turbosmart Anti-Lag Valve from Turbosmart themselves in the YouTube clip below: Multiple fittings are provided for easy fitment. Please contact AET Motorsport for further details regarding the fifth generation of the Anti-Lag Valve. Fitting and Dyno Testing available at the AET workshop. Call or Email to discuss: Tel: 01924 228042 | Email: info@aetmotorsport.com

Read more less

TS-0626-1354 Turbosmart's Internal Wastegate Actuators are quickly becoming one of the hottest boost-control products on the market. And for those wanting to run big boost pressure, without the hassle of fitting custom exhaust manifolds and external wastegates, Turbosmart introduces the IWGHP, High Pressure Internal Wastegate Actuator. The IWGHP range provides better turbo response and greater sensitivity when managing boost than a stock actuator, with the added bonus of being capable of handling high boost pressures. Only 28mm longer than the standard IWG75 these wastegates are ideal for high boost turbo diesel and racing applications. Available with 35PSI springs as standard (10psi to 40 psi options available), for the extra hard core. Yep, that's 40PSI without even having to change your manifold.

Read more less

 Ford Focus ST 2.0L Ecoboost Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the ecoboost IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Read more less

Turbosmart's new Twin Port IWG-75 gives you an improved ability to control a wider range of boost from your internally wastegated turbocharger.  

Read more less

 Ford Focus ST/XR5 2.5L Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the ST/XR5 IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator. TS-0622-2072

Read more less

Nissan R35 GT-R Internal Wastegate Kit includes two Internal Wastegate Actuators (IWGs) to provide better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory parts. The Nissan R35 GT-R Internal Wastegate Kit is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Read more less

The Porsche 996 GT2 Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Porsche IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Read more less

Turbosmart Internal Wastegate Actuator provides better turbo response and greater sensitivity when managing boost pressures. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Read more less

Turbosmart Internal Wastegate Actuator provides better turbo response and greater sensitivity when managing boost pressures. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Read more less

 Turbosmart Internal Wastegate Actuator provides better turbo response and greater sensitivity when managing boost pressures. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Read more less

Clevis - Suits Turbosmart IWG Universal Range TS-0600-3001TS-0600-3002TS-0600-3003

Read more less

 Replacement Diaphragm for the IWG75 range of actuators.

Read more less

 Dodge Ram Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Dodge IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Read more less

 Ford F150 Ecoboost Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Ecoboost IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Read more less

 Ford Focus RS 2.5L Turbo Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Focus RS IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Read more less

 Ford Powerstroke 7.3L Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Read more less

 Ford XR6 Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the XR6 IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Read more less

TS-0625-1072 Turbosmart Internal Wastegate Actuator provides better turbo response and greater sensitivity when managing boost pressures. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Read more less

Tasked with controlling how much boost the Focus's turbo is allowed to produce, the wastegate plays an integral role in the turbo system. However, the Focus's standard actuator does not let the Focus reach its full potential, even at standard boost pressures.OEM wastegate actuators tend to use soft springs, which begin to open long before peak boost is reached. The result is that you don't get all the boost you could be getting. Turbosmart's IWG-75 Internal Wastegate Actuator is a 12PSI-rated actuator designed with performance and reliability as key priorities. Turbosmart's actuator provides faster boost build-up and less drop-off at high RPMs, with a more responsive and stable boost curve.The results of fitting a Turbosmart IWG to your Focus RS are truly impressive, giving you dramatic improvements to the vehicle's responsiveness and performance compared to the standard actuator, especially in the mid range. As a bang-for-buck modification, Turbosmart's IWG-75 for the Focus RS is hard to match.In addition, their billet construction and Turbosmart's rigorous quality testing ensures the ultimate in reliability, while the locking collar design allows for quick spring changes, should you want to tune your Focus for increased boost.  TS-0622-9122

Read more less

TS-0622-8102 The EcoBoost Mustang has brought turbocharging back to the 'Stang for the first time since the Fox Body SVO. While the EcoBoost is an impressive engine which offers big-engine performance with small-engine economy, we believe the Mustang's 2.3-liter EcoBoost engine has a lot more potential. This is why we have been developing a whole range of products for the Mustang and other EcoBoost Fords.

Read more less

TS-0610-1072 Mazda 3 MPS Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Mazda 3 MPS IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.   NOTE: Does not fit US and other LHD models.

Read more less