All

Why buy the Forge Fiat 500 dump valve? Your Fiat 500 is equipped with an electronic solenoid driven valve from the factory, which is integrated into the functions of the ECU, and unplugging or removing the valve will result in a check engine light on the dashboard. FITS: Fiat500500Euro 6 Abarth595145BHPCompetizione 180BHPTrofeo 160BHP  Turismo 165BHP695XSR Yamaha Limited Edition 165BHP  Rivale 180BHP The Forge solution is to retain the solenoid operation, but to use it to divert vacuum and boost pressure to the valve, to make it into a more traditional valve driven by air pressure. The Forge valve will give you a product that is superior in its construction and durability over the OEM valve, and of course the forge is serviceable and guaranteed for life . Over time the OEM valve begins to leak, and in some cases the plastic piston goes brittle and breaks. The Forge valve doesn’t suffer with either of these problems as it uses an aluminium piston and is totally rebuildable. It’s also configurable for different levels of boost pressure e.g. on a remapped car, by simply changing the piston preload spring inside the valve. Go fit the Forge Fiat valve and enjoy the performance. The Forge atmospheric Blow Off valve for the Fiat 500 Abarth T-Jet made from billet aluminium. This atmospheric blow off valve dumps the charge-air to atmosphere creating the "Whoosh" sound when the throttle is lifted. This improves the throttle response and increases the clamping load to maintain boost pressure more reliably. Unlike single piston or diaphragm diverter valves, this uses counter balanced springs and dual pistons to prevent the valve from leaking air into the intake system at idle. This prevents our blow off valves suffering any of the failures associated with single piston and diaphragm type diverter valves. The kit is complete with all fittings and includes a replacement solenoid and wiring harness to activate the valve to retain the engine management functionality. The valve itself is of dual piston design for longevity with the ability to be serviced and tuned with replacement springs if required. (See below) If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Designed specifically for the BMW/Peugeot N18 engines, (Cooper S 2011 onwards, JCW Cooper S 2013 onwards, R58 Coupe 2012 onwards, Peugeot 208 GTi late 2012 onwards, Peugeot 308 GTI, RCZ THP 156 & 200 2011 on). This product is either recommended where the boost pressure has been increased by an ECU software upgrade, for those wanting a loud blow off sound, or simply as a solution to the many failures that have occurred. The most common complaint on the OEM solenoid valve is a split diaphragm preventing the valve from opening fully, or not at all. This doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure. We have seen many valves with this problem (see image above). FITS: MiniCountryman 2010 - 2016Cooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18)Paceman 2012 - 2016Cooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18)Second generation (R55/R56/R57/R58/R59) (2006–2015)R55 ClubmanPre LCI 2007-2009 N14/N18 R56 HatchbackLCI 2010-2014R57 ConvertibleLCI 2010-2014R58 CoupeLCI 2012-2015R59 RoadsterCooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18)Peugeot208GTIGTI 2016 OnwardsRCZ THP156200 The other problem is that diaphragm retaining ring is made from very thin plastic that goes brittle with heat cycles and oil contamination, and eventually fails. This prevents the diaphragm from sealing with the same problems as mentioned above. This particular failure also results in the valve falling apart upon removal from the turbo, though in extreme cases bits of plastic can enter the turbo and destroy it. (see image above) Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve is piston based, with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. The valve has been proved on the VAG scene for many years. The spring is interchangeable for different levels of boost, and the solenoid is plug and play with the wiring harness which is included.   In order that you purchase the correct valve for your vehicle please refer to the fitment table below before ordering.   Product Code Fitment FM207V Recirc Valve N14 Engines Cooper S 2007-10, JCW Cooper S 2007-2012 FMDVR60R Recirc Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards FMDVMCS Blow Off Adaptor Plate For 2007/8 Cooper S Turbo only FMDVR56A Blow Off Valve N14 Engines Cooper S 2007-10, JCW Cooper S 2007-2012 FMDVR60A Blow Off Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards        In The Box:1 x FMDVR60A Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x 2000mm Length of 4mm Vac Hose1 x Aluminium Spacer1 x M6 x 30 Hex Head Bolt1 x M6 Penny Washer1 x M6 Nyloc Nut1 x Uprated Red Spring10 x Cable Ties1 x 5mm T Piece1 x Forge Keyring and Sticker   Patent applied for This product is available in machined alloy finish only   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Blow Off valve is for the Peugeot / BMW Mini 1.6 Turbo engines, as found in the Peugeot 207/307/308 GT Turbo and BMW Mini Cooper S Turbo fitted with the N14 engines, fits: MiniSecond generation (R55/R56/R57/R58/R59) (2006–2015)R55 ClubmanPre LCI 2007-2009 N14/N18 R56 HatchbackPre LCI 2007-2009 N14R57 ConvertibleLCI 2010-2014Peugeot207This valve is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. The most common complaint on the OEM solenoid valve is a split diaphragm preventing the valve from opening fully, or not at all. This doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure. We have seen many valves with this problem .The other problem is that diaphragm retaining ring is made from very thin plastic that goes brittle with heat cycles, and eventually fails. This prevents the diaphragm from sealing with the same problems as mentioned above. This particular failure also results in the valve falling apart upon removal from the turbo, though in extreme cases bits of plastic can enter the turbo and destroy it. (see image above). Our alternative is a fully engineered solution offering both significantly improved reliability .Our valve is piston based , with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. The valve has been proved on the VAG scene for many years. The spring is interchangeable for different levels of boost, and the solenoid is plug and play with the wiring harness which is included.   Product Code Fitment FM207V Recirc Valve N14 Engines Cooper S 2007-10, JCW Cooper S 2007-2012 FMDVR60R Recirc Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards FMDVMCS Blow Off Adaptor Plate For 2007/8 Cooper S Turbo only FMDVR56A Blow Off Valve N14 Engines Cooper S 2007-10, JCW Cooper S 2007-2012 FMDVR60A Blow Off Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards     In The Box:1 x FMDVR56A Valve1 x Mini Wiring Harness1 x Solenoid, Bracket, and Screws1 x Mini Vacuum Tap1 x Uprated Blue Spring10 x Cable Ties1 x 2000mm of 4mm Vacuum Tube3 x M6 x 35 Socket Cap Bolts1 x M5 x 35 Self Tapper Screw1 x Instructions1 x Forge Keyring and Sticker   This product is available in machined alloy finish only   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a piston design blow off valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves, but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified. To ease installation, the top or vacuum connection is angled.   In The Box:1 x FMDVF14A Valve1 x 2000mm of 4mm Vacuum Tube1 x 500mm of 6mm Vacuum Tube1 x Solenoid, Bracket, and Screws14 x Cable Ties1 x Uprated Blue Spring1 x Aluminium Machined Coupler1 x 4mm T Piece1 x 6mm T Piece1 x Wiring Harness1 x 6mm-4mm Plastic Reducer1 x M6 Nyloc Nut1 x Instructions1 x Forge Keyring and Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A remote Blow off, or Dump Valve Kit for the Ford Focus Mk2 ST225. This uses a twin piston valve to ensure compatibility with the engine management system and a custom silicone hose to ensure easy installation. This valve can be installed in combination with the OEM valve, or on it's own by using one of our blanking plates. The hose is available in red, blue, or black, and the valve is available in black. Please select your choice from the options above.   In The Box:1 x FMFOCSTDV Valve1 x 35mm Hose Clamp1 x 50mm Hose Clamp1 x 500mm of 4mm Vacuum Tube1 x 5mm T Piece1 x Silicon Hose #10221 x Instructions1 x Forge Sticker

Read more less

This Blow off or Dump valve kit is specifically designed for the Renault Clio 1.6 200THP/220 Trophy   In The Box:1 x FMDVC200A Valve3 x Cable Ties1 x 1000mm of 4mm Vacuum Tube4 x 35mm Hose Clamps1 x Straight Silicone Hose (25mm x 65mm)1 x M5 x 35 Self Tapper Screw1 x 25mm Blanking Plug1 x Vacuum Tap1 x Silicon Hose #14591 x Blanking Plug1 x Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kits below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This valve has been specifically designed for the Audi A1 1.4 Turbo (122hp) engine. This is a full replacement atmospheric blow-off valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our many TSI replacement valve options, the valve is fully engineered to remedy the failure issues associated with the OEM solenoid valves. FITS: AudiA1A1 (8X) 2010-20181.4 TurboSeatLeonMk2 2005-20121.4 Turbo 2007-2012SkodaYeti1.4TS 122ps (2008-2012)VolkswagenScirocco1.4 Turbo 120 Please note this valve is only compatible with models that have a turbo mounted diverter valve as standard, as found in models up to and including most 2014 models. For recent 1.4 turbo models that do not have a standard turbo mounted diverter valve please see part number FMDV1.   Our valve uses full billet alloy construction with a piston based internal design that provides significantly improved reliability over the OEM valves, along with lightning fast response.   In The Box:1 x FMDVA1TSI Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x 2000mm Length of 4mm Vac Hose1 x Skoda Vacuum Tap2 x M5 x 35 Self Tapper Screw1 x Uprated Blue Spring10 x Cable Ties1 x Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a piston design bypass valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified.  * To avoid the possibility of a P0101 trouble code, the ECM must be reprogrammed with a tune optimised for atmospheric discharge.    In The Box:1 x FMDVCS14A Valve1 x Uprated Yellow Spring1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Blow Off Valve for Hyundai Genesis Sonata and Kia Sportage and Optima. The Forge direct replacement blow-off valve is designed to be a more durable and performance oriented valve than the OEM unit. The OEM valve is suitable for stock boost levels for a period of time, however, once boost pressure is raised, and after prolonged use, the stock valve will no longer be adequate. Raising the boost output of the vehicle will have a number of effects on the OEM valve. First and foremost, the additional boost pressure will quickly exceed the capacity of the OEM spring to keep the valve closed under higher boost levels. Since you cannot change the springs in the OEM valve, it cannot be adjusted for higher boost levels. Secondly, the additional heat generated by the increased boost will quickly deteriorate the OEM rubber valve diaphragm, which will also lose strength with repeated oscillations. The Forge valve uses full billet aluminum construction and Viton silicone o-rings that will withstand the highest boost levels and repeated abuse. It is also tunable for varying boost levels with the included spring tuning kit. If there is ever a problem with the valve such as a torn o-ring, replacements are available free of charge, and the valve is fully rebuildable. As the Genesis Coupe 2.0T does not use a MAF (mass air flow) sensor, there is no reason that the residual boost pressure at throttle lift cannot be vented to the atmosphere such as with this valve. The engine management does not meter the air volume entering the engine, so this residual pressure can be discharged without any adverse affects on the performance or driveability of the vehicle. Additionally, the valve being open at an idle or vacuum condition is a normal occurance, and is not indicative of a leaking valve. If the intake manifold is in vacuum, even while cruising at speed, the valve may be open. The OEM valve operates in this same manner, however, it is just not visible/audible because it is recirculating instead of vented to the atmosphere. Using a stiffer spring to keep the valve closed at a vacuum condition may result in too stiff of a spring tension to effectively discharge pressure at a throttle lift condition.   In The Box:1 x FMDVHGA Valve1 x Uprated Yellow Spring1 x Uprated Blue Spring3 x M6 x 16 Socket Cap Bolts3 x M6 Plain Washers3 x M6 Spring Washers1 x Forge Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A fully engineered piston type, turbocharger Blow Off valve for the Nissan Juke 1.6 Turbo. This valve sounds amazing on this engine. The design and materials used in the construction of this valve enable not only for the valve to be tuned when boost pressures have been increased but even on a standard car, will provide a fast acting and responsive valve that gives reliability over failures often associated with the original manufacturers design. In The Box:1 x FMDVAND Valve1 x 28mm Blanking Plug1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Blow Off, or dump valve, is for the Renault and Nissan Turbo engines that have the electronically controlled bypass valve (OEM Part no. 144839204R). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. Unfortunately, the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. This prevents the diaphragm from sealing. Our alternative is a fully engineered solution offering both significantly improved reliability. The Forge valve is piston based, there is no diaphragm to fail, and of all aluminium billet construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control, over valve actuation. In The Box:1 x FMDV23A Valve1 x 2000mm of 4mm Vacuum Tube1 x 50mm of 10mm Vacuum Tube1 x 3 port Solenoid and fixings13 x Cable Ties1 x Uprated Red Spring1 x 10-6-10 T Piece1 x Forge USB Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Blow Off or Dump valve has been specifically designed for the Renault Megane RS250 RS265 and RS275. This kit includes a blanking plate, as the original or OEM valve should be removed to prevent issues with loss of boost pressure. This kit is available with either a red, blue, or black silicone hose, and contains everything needed for installation. Please select the colour required in the options above.   In The Box:1 x FMDVRMA Valve1 x 500mm of 4mm Vacuum Tube1 x 38mm Aluminium Hose Joiner1 x Uprated Blue Spring1 x MIE Blanking Plate1 x 45mm Hose Clamp 1 x Silicone Reducing Elbow #5881 x M6 Penny Washer1 x M6 Plain Washer1 x M6 x 16 Hex Head Bolt1 x M6 Nyloc Nut1 x 5mm T Piece1 x Instructions1 x Forge Sticker   If you wish to tune this product to fit the needs of your engine, please see the spring tuning kits below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a replacement for OEM Part Number 06N.145.710.B Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2021-on VAG 2.0 TSI engine (engine codes DNP & DNFB). This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition! Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer life but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp! This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the air filter, older larger valves and sandwich plates will not fit this engine. In The Box:1 x FMDV32 Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x Blue Spring (Uprated)1 x 5mm Brass T Piece12 x Cable Ties1 x 1500mm Length of 4mm Vac Hose1 x Forge Keyring and Sticker  

Read more less

The Forge Motorsport FMDV22 Blow off valve kit now fits all engine variants, please identify from the images below whether you require the extra breather adapter for you application. If your engine bay is the same as shown above then you will require the aditional breather adapter so please make sure to select 'Yes' on the Breather adapter dropdown option. FITS: AudiA1A1 (GB) 2018-35 TFSI (1.5 TSI)A335 TFSI (1.5 TSI)Q235 TFSI (1.5 TSI)Q335 TFSI (1.5 TSI)CupraFormentor1.5 TSISeatArona1.5 TSIAteca1.5 TSIIbizaMk5 (KJ) 2017 - late 20211.5 TSILeonMk3 2012-20201.5 TSI 130/150 BHP 2018-Mk4 2022-1.5 TSITarraco1.5 TSISkodaKaroq1.5 TSIKodiaq1.5 TSIOctavia1.5 TSIScala1.5 TSISuperb1.5 TSIVolkswagenArteon(2017-2020)1.5 TSI(2020-)1.5 TSIGolfMK71.5 TSIMK7.51.5 TSIMK81.5 eTSI1.5 TSIPassat1.5 TSIT-CrossT-Cross 1.5 TSIT-Roc1.5TSITiguan1.5 TSITouran1.5 TSI If your engine bay is the same as shown above you do not require the additional breather adapter, please make sure to select 'No' on the dropdown option. As the engine does not have a diverter valve fitted as standard, Forge have developed a twin piston dump valve that not only gives you an incredibly loud sound when lifting off the throttle, but also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure. Especially on engines and modified vehicles. This valve kit allows the fitment of our fast response blow off valve preventing turbo surge and prolonging the life of your engine’s turbocharger.   The kit includes all of the necessary hardware and step by step installation instructions for any car enthusiast with appropriate garage tools to fit at home, in just a couple of hours!     Due to the exposed position of the OEM boost pipe and the nature of heat cycle, the plastic that the OEM pipe is made from can deteriorate over time, becoming brittle and susceptible to boost leaks. This kit totally replaces this plastic pipe from turbo to manifold with a silicone hose (available in a choice of colours!).     Highlights: CNC machined billet couplers and components CNC machined twin piston Forge valve Three hose options: red, blue, or black (Custom available but will incur a 50% non-refundable deposit and a lead time of 8-10 weeks) Forge valve will not bring on any check engine lights (EML)  The hose has a quality inner lining of modified silicone known as 'Fluorosilicone'. This means that the hose will stay bright and vibrant, and will not deteriorate over time. Forge Motorsport lined hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The construction of the hose has been engineered to exceed that of the OEM fitments, the Forge Motorsport hose will enhance any engine bay both technically and aesthetically. The hose from this kit replaces OEM part numbers 05E.145.673.E and 05E.145.674.E We cannot guarantee that this product will fit with all aftermarket intakes. Lifetime warranty. In the Box:1 x Atmospheric Dump Valve1 x Boost Tap/Take Off (Including Cork Gasket and Screws) Throttle Body and Turbo Couplers1 x Silicone Hose (Red, Blue or Black)3 x Hose ClampsAll fixings and fittings1 x Roll of Vacuum Tubing1 x Wiring Loom Extension1 x Forge Sticker     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Now you can fine tune your Blow Off/Diverter Valve to the exact needs of your engine with this complete tuning kit. If you are finding that the valve is dumping more than required, or if you are losing boost pressure it is normally an indication that a stronger spring is required. Alternatively, if the valve is failing to dump it may be necessary to install a weaker spring. Please note that fitting a stronger spring into a valve will not increase boost pressure, unless existing pressure is being lost. Failure to allow the valve to operate by installing a spring which is too strong, may cause damage to the turbocharger. Please also note that the red coded springs should not be installed in the DVR or DV007 diaphragm valves.  Valve Spring color coding: Green - 5-15 PSI, Yellow - 15-23 PSI, Blue - 23-30 PSI, Red - 30 + PSI.*The above figures are estimates only and should only be considered as a guideline* Note: Serious or fatal damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation of this product.  Please contact us if you are uncertain whether this kit is suitable for your valve. *Please Note - The colours of the springs illustrated may differ to what you receive. All spring kits are brand new but are not sprayed. Colour is used as an identifier*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FOR MULTIPLE VEHICLES 

Read more less

Product Description FMDV41 is our blow off valve solution for the PSA 1.2 PureTech engine, which is found in most Peugeots and Citroën models from 2017 till present (fitting engine code EB2ADT). This valve has been expertly manufactured and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the PSA 1.2 pure tech engine, this is a fully atmospheric (blow off) valve, so you can enjoy that fantastic “pshh” sound!            This valve is a fully engineered solution offering significantly improved reliability; this valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that retains the desirable OEM ECU control over valve actuation. Furthermore, heavier springs are available and are easy to swap in to suit your tuning needs if you add more power to your vehicle. Highlights: Utilising world leading springs for more precise operation and consistency All internal and external components have been made in the UK, ensuring top quality, and offering a valve with faster response times and longer service intervals. The piston uses heat stabilised Viton O-rings Lubricated with high temperature Mobil1 grease to ensure a long life with minimal wear and very long service intervals. A super durable and responsive aluminium piston Fully serviceable and rebuildable in minutes Available in anodised Black Unlike other valves on the market, ours produces no check engine lights (EML) Covered by the unique Forge Lifetime Warranty* Fitment: Citreon C3 2016> Citreon C4 Cactus Citreon C5 Aircross Citreon DS3 2016> Citreon DS4 2016-2019 Citreon DS5 2018> Jeep Avenger 2023> Peugeot 2008 2019> Peugeot 3008 2016> Peugeot 308 GTI 2015-2020 Peugeot 408 2016> Peugeot 5008 > 2017> Vauxhall Astra L 2021> Vauxhall Combo E 2018> Vauxhall Corsa F 2019> Vauxhall Crossland Vauxhall Grandland Vauxhall Mokka 2021>  

Read more less

This is a piston design recirculation valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm valves (OEM) but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified. To ease installation the top or vacuum connection is angled. This part first the Ford Focus ST225 and ST250   In The Box:1 x FMDVK04S Valve1 x Uprated Yellow Spring1 x Forge Sticker

Read more less

Red Hose available only This Forge Motorsport dump valve discharge pipe is available in red, blue or black and is the perfect complement to the other hoses we produce for the Fiat 500 1.4 T-jet engine. As always we have engineered this to not only look good, but to improve on the original fitment. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* *T&C's Apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

An Alloy Atmospheric Dump Valve to fit the Subaru Impreza 2001 onwards models including the 2009 GR STi . Made from billet aluminium and hand polished in the UK, this atmospheric diverter valve dumps the charge-air to atmosphere creating the "Whoosh" sound most commonly associated with rally cars when the throttle is lifted. This increases both quicker throttle response and higher clamping load to maintain boost pressure more reliably. In The Box:1 x FMDVSUB01 Valve1 x 34mm Blanking Plug1 x Forge Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below. If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description The Forge Motorsport dump valve for the 2015-on 1.2 TSI engine codes CJZA, CJZC, CJZD, CYVB as found in the Skoda Fabia, Skoda Octavia, VW Golf, VW Polo, Audi A1, Audi A3, Seat Ibiza and Seat Leon. Please note this kit is only compatible with models that do not have a standard turbo mounted diverter valve. Earlier models that have a turbo mounted diverter valve as standard require the kit with part number FMDVA1TSI and FMDVATSI The 1.2 and 1.4 TSI doesn’t have a dump valve from the factory, so this product allows you to have the traditional dump valve noise between gear changes and when letting off the gas pedal. It won’t bring on any check engine lights and the car will drive just as before. This kit totally replaces the plastic pipe from turbo to manifold with a silicon hose (available in a choice of colours), and everything else you need to install the valve is included in the kit together with full instructions. Unlike other valves on the market the Forge valve will not bring on any check engine lights. ( EML )  The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Flurosilicone. This means the hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically. The use of a Flurosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty. This Forge valve set up is designed to fit with the standard intake. We cannot guarantee it will fit with all aftermarket intakes. This product design has been registered.  Registration Number:  5004511 Compatible Vehicles Audi A1 1.2 Tsi 2015 Onwards   A1 1.4TSI 2015 Onwards   A3 1.2 Tsi 2015 Onwards   A3 8V 1.4 TSI 2015 Onwards Volkswagen Golf MK7 1.4TSI   Golf Mk7 1.2TSI   Golf Mk7 1.4 150bhp   Jetta 1.4tsi 2015 Onwards   Polo 1.2 Tsi 2015 Onwards Skoda Fabia 1.2 Tsi 2015 Onwards   Octavia 1.2 Tsi 2015 Onwards Seat Ibiza 1.2 Tsi 2015 Onwards   Leon 1.2 Tsi 2015 Onwards   Leon 1.4TSI 2015 Onwards Warranty Warranty Infomation All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied. For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.

Read more less

Product Description The Forge Motorsport dump valve for the VW Golf GTE The GTE doesn’t have a dump valve from the factory, so this product allows you to have the traditional dump valve noise between gear changes and when letting off the gas pedal. It won’t bring on any check engine lights and the car will drive just as before. This kit totally replaces the plastic pipe from turbo to manifold with a silicon hose (available in a choice of colours), and everything else you need to install the valve is included in the kit together with full instructions. Unlike other valves on the market the Forge valve will not bring on any check engine lights (EML)  The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Flurosilicone. This means the hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically. The use of a Flurosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty. This Forge valve set up is designed to fit with the standard intake.We cannot guarantee it will fit with all aftermarket intakes.The supplied blanking plug should be fitted if your car does not have a secondary breather. This product design has been registered.  Registration Number:  5004511  

Read more less

*Please be aware that if your vehicle has the below MAF sensor on the inlet then this intake will not fit your vehicle, we currently do not offer an alternative for MAF vehicles* Forge are proud to present the latest high performance intake for the popular 1.5 TSI Evo engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range. This kit features a Forge Ram Air high flow, pleated, synthetic nanofiber filtration filter, that has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.5 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The benefit of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the TSI EVO engine. Left hand drive intake Right hand drive intake As with all our intakes we design, high air flow is considered absolutely paramount, thus, we endeavoured to incorporate a large bore silicone high flow pipe with turbo inlet adaptor included. This helps to aid the engines performance and air flow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air than the stock inlet tract to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes as more air is being kept within the intake system. The Forge developed inlet tract has more than a 50% increase in volume with the area at the mouth of the turbo increased to 46%. This, combined with no internal baffles or noise restrictors gives a helping hand to the vehicles acoustic notes and throttle response. With the use of Solidworks®, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. All of the billet components supplied have been made from 6082 Alloy and then anodised to ensure the alloy has no fatigue and stays without corrosion for years to come. This kit completed with stainless steel high quality hose clamps has the usual unrivaled performance you would expect from Forge Motorsport. Each Forge Motorsport intake hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. Please select your colour choice when ordering. During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust the figure can be far greater as the OEM intake system is restricted on high performance engines. The FMINDK30 combined with either our atmospheric dump valve kit FMDV22 or our recirculating valve kit FMDV30 certainly transforms the whole driving experience and engine note of your 1.5 TSI EVO engine. As ever, this product comes with the Forge Motorsport lifetime warranty on all the hardware supplied, giving you the enthusiasts, the best product for your pride and joy.     The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*

Read more less

This valve kit allows the fitment of a fast response blow off valve on the VW Up 1.0 TSI/GTI engine. As the engine does not have a diverter valve fitted as standard, Forge Motorsport have developed a twin piston dump valve that not only gives you an incredibly loud sound when lifting off the throttle but it also increases the throttle response during gear changes by reducing turbo lag, it is designed to help the turbocharger maintain its rotational speed ready for when you accelerate, as well as prolonging the life of your turbo. Please select the valve and hose colours using the options above. Due to the exposed position of the OEM boost pipe and the nature of an engines heat cycle, the plastic the OEM pipe is made from can deteriorate over time becoming brittle and susceptible to boost leaks. This kit totally replaces this plastic pipe from turbo to manifold with a silicon hose (available in a choice of colours), and everything else you need to install the valve is included in the kit together with full instructions. Anodised CNC machined billet couplers and components along with a tuneable CNC machined twin piston Forge Motorsport valve. Custom colours are available but will incur a 50% none refundable deposit and a lead time of 8-10 weeks. Unlike other valves on the market the Forge valve will not bring on any check engine lights. (EML)  The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This ensures the colour of the silicon hose stays bright and vibrant and unlike our competitors will not deteriorate over time. This means Forge Motorsport hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The construction of the hose has been engineered to exceed that of the OEM fitments, the Forge Motorsport hose will enhance any engine bay both technically and aesthetically. The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty. We cannot guarantee that this product will fit with all aftermarket intakes.   PLEASE NOTE IF YOU HAVE THE EXTRA SPOUT ON YOUR INLET PIPE AS SEEN IN THE PICTURE BELOW THEN THIS ITEM WILL NOT FIT.     In The Box: 1x Atmospheric Dump Valve1x Boost Tap / Take Off (Including Cork Gasket and Screws)1x Throttle Body Coupler with Dump Valve Thread1 x Uprated Spring (To be used when the engine is mapped)1x Hose Coupler1x Threaded Blanking Plug1x Silicone Hose (Red, Blue or Black)3x Hose Clamps2x Bolts1x Roll of Vacuum Tubing1x Wiring Loom Extension   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Dump / Blow Off Valve Fitting Kit.   In The Box:1 x Silicon Straight  1 x 2000mm of 4mm Vacuum Hose2 x 35mm Hose Clamp1 x 25mm Blanking Plug6 x Cable Ties1 x 4mm Straight Joiner1 x Forge Sticker

Read more less