All

Bailey Pro-Series Satin Black Water header tank cap cover with HOT! logo, fits over top of Original Blue Bailey cap. Grooved inside for perfect fit! Made from solid billet alloy, with engraved HOT! logo. Available in two finishes: Polished Finish Pro-Series Black, the engraved HOT! logo shows up in original alloy colour Will Only Fit Original Blue Bailey header caps & AIRTEC header tanks fitted with Blue cap

Read more less

Fits over top of Original ford Header tank cap with a perfect fit. Anodised satin black alloy and engraved logo which show up in silver. Part no: ASCAPFO10 TECHNICAL DATA Pro-Series Satin Black Water header tank cap cover with HOT! logo, fits over top of Original ford Header tank cap. Grooved inside for perfect fit! Made from solid billet alloy. Totally original finish, anodised satin black alloy and engraved logo which show up in silver Part no: ASCAPFO10

Read more less

Pro-Series Satin Black round washer bottle stopper with washer logo,'o' ring securing system. Grooved inside for pefect fit! Made from solid billet alloy. Totally original finish, anodised satin black alloy and engraved logo which show up in silver

Read more less

Pro-Series Satin Black Focus RS camshaft cover front heatshield trim with HOT! logoReplaces fords original heat shield trim, easy to fit and looks great!Fits onto the front of the camshaft cover, behind the turbo.Part no: ASCOVFO114

Read more less

ST150 Mirror finish stainless steel Camshaft cover, cover with optional AS logoDoes your ST have an aftermarket Airfilter fitted? Original ford camcover is now revealed and it isn’t the best looking is it? well our new Bolt on design camcover, cover will sort that out!Easy bolt on Design, will finish off your Camshaft cover a treat!Fits All Fiesta ST150 with standard Airbox removed for aftermarket Airfilter

Read more less

The perfect finishing touch to your Focus RS MK2 – Machined Finish Replaces Ford’s ugly Black Hexagonal posts with stainless steel polished items, come complete with stainless fittings. Fitting takes only minutes – designed with a cut out in the posts for a 10mm spanner to neatly fit into the groove, for easy installation

Read more less

Wing rail top covers, fit over existing plastic trims Fits Focus ST Turbo & all Mk2 models up to 2008 Fitting, simply remove black plastic screws with inserts, place new stainless covers on then replace plastic screws & inserts to secure. Price is per pair

Read more less

Focus Mk2 Wing rail covers, fit over existing plastic trims Fits Focus ST Turbo & all Mk2 models from 2008 on-wards Fitting, simply remove black plastic screws with inserts, place new stainless covers on then replace plastic screws & inserts to secure.  Price is per pair

Read more less

  The Billet Oil Cap for BMW by MMR Performance is the latest under-bonnet accessory to instantaneously increase the aesthetics of your car.  Built from billet T-6061 aluminium, and with its sleek design allows it to be easily fitted into any engine to give it that extra style.  Available in either Deep Black or Dark Anthracite you have the choice of blending into the shadows or standing out in the crowd, whichever suits your style.  This filler cap will fit all engines with the rounded filler cap which includes all BMW engines post 2007.  

Read more less

The Charge Pipe Kit for the BMW N55 135i, 335i, and 1M Models is here!! The charge pipe should be the first modification made to your BMW. The Charge Pipe Kit is a direct replacement for the OEM pipe that due to its plastic material is prone to breaking under increased pressure. The MMR Performance Charge Pipe is made from lightweight aluminium and assures a more sturdy pipe that increases the throttle response and decreases the chance of turbo lag allowing you to push the engine further than before, as it's smooth pipework improves the airflow. With its durable crinkle black finish paired with the laser-etched MMR logo, it really does look as good as it performs.  Included in the Kit: Replacement high-flow aluminium charge pipe with CNC leak-free connection Silicone coupler hose and two stub hoses Replacement c-clip Jubilee clips O-ring Require a Fitting? Please contact a member of the team at AET Motorsport to book in for fitting the MMR Performance Charge Pipes to your BMW N55 135i, 335i, or 1M model. Our team of highly skilled technicians has a vast amount of experience working on these BMW models and will therefore have no problem with the fitting.  

Read more less

The Sump Baffle for the BMW F-Series N55 Engine by MMR Performance is here!! It's well known that the BMW's with the N54 engine that includes the M135i and M235i are prone to oil starvation when pushed hard on the road and even more so when on the track.  The OEM sump baffle allows for the oil to move putting stress on the oil pump to maintain correct oil pressure for the engine. The MMR Performance Sump Baffle has been expertly designed in such a way that prevents oil starvation and maintains the correct oil pressure no matter what the driving conditions, ensuring the longevity and health of your engine.  Unlike other solutions available that require a plate to be welded in, the MMR solution is simply bolted into place making the addition of the baffle considerably easier and more accessible to install. Suitable for: BMW M135i BMW M235i  

Read more less

Racingline Bonnet/Hood Gas Strut A Gas Strut conversion to lift & hold your bonnet/hood for Golf Mk8 (all models). A PRODUCT YOU SHOULDN’T NEED…..BUT DO! Just like it should have come from the factory… Our new Golf Mk8 Gas Strut conversion kit lets you get rid of the cheap bonnet prop that the car now comes with. Simple, and fully reversible DIY fit in ten minutes. No cutting or drilling required. After some experimentation, we have produced a gas strut with the correct length and pressure for the Golf 8 bonnet. Lifts and closes with the perfect resistance. Included is a high-grade stainless steel ball-end bracket, which screws onto the existing bonnet latch bracket stud – no new holes or drilling needed. At last – your bonnet will open easily and stay open while you’re working in the engine bay. Note: Will only fit Mk8 Golf models (nothing else!) Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR810002

Read more less

Electrode Gap (mm)0,7 Number of Poles1 Outer thread (mm)14 Spanner Size16 Spark Position (mm)4 Thread Length (mm)26,5 Thread Pitch (mm)1,25 Tightening Torque (Nm)28 Fitted Quantity4   Bosch Spark Plug Spark plugs ignite the air/fuel mixture of a spark ignition engine and play a vital role in producing maximum power whilst keeping fuel consumption and emissions to a minimum. As a general rule, spark plugs should be checked during services and replaced as necessary but check with your vehicle manufacturer's service schedule as some higher-end spark plugs have a longer life. Over time spark plug electrodes can wear down, crack, corrode and become coated in deposits, causing misfires. If the car is running rough, replacing the spark plugs is an inexpensive first step that will usually solve the problem. There are a variety of plug types made to suit different vehicle designs and models. Spark plugs for your car must be the proper size and shape to fit the head opening, and reach the correct depth into the cylinder.

Read more less

NB Styling Bonnet strut Kit for the Citroen DS3 The NB Styling Bonnet strut kit complete the look of any DS3, from the humble base model to the heavily modified.  Bonnet Strut Kits available in Standard Black Why Buy this Bonnet strut kit? First of all, NO more having to lift and hold the heavy bonnet while you fiddle with the prop. Because it LOOKS like it was fitted from new IDEAL for shows to complete the dressed engine bay lookOPEN Bonnet held firmly rather dropping on a windy day.GOOD RE-SALE Value , should you decide to sell your car, most importantly the kit can be easily removed without damage to your car. Easy to fit in about 15 minutes. So hence our motto….”Styling made simple”. Where we can we refine each design to be as simple and intuitive to fit as possible with the least amount of tools needed. “No cutting or drilling…” This is what we keep in mind when designing and producing an NB Styling bonnet strut kit. First of all, NOBODY wants to start drilling holes or cutting bits off their pride and joy to fit another modification. This is why ALL our kits are bespoke to the car it is made for and will not fit any other vehicle. We are Car Enthusiasts and try very hard to give each kit that OEM look, certainly what car modifiers look for. Lesser generic kits are just about making a profit, therefore no thought has gone into the design. Hence why they look “Not part of the car” Our kit requires only a 10mm spanner and a small screwdriver to fit. The Standard Kit contains… Steel Brackets ( Zinc coated then Powder coated Black)2 x Pressurised struts (Black)And all new stainless steel washers and bolts  

Read more less

Cusco Oil Filter 65x65 3/4-16UNF The Cusco Sports OIL filter was designed to deliver true filtration and proper flow. High efficiency filter - The pleated filtration paper catches fine dust, contanminants without stagnating flow. Mesh Filter - This mesh supports the paper filter from collapsing or changing shape during high pressure, when experiencing extreme conditions. Reinforced Relief Valve - This spring keeps the proper pressure traveling through the filter, even when viscosity changes. High Power Magnet - Loaded into every Cusco Oil Filter is a high strength magnet that removes the iron powders and any other metallic particles that can harm an engine.

Read more less

DENSO has been setting the standard for spark plug technology since 1959. They develop all of their ranges in-house, and manufacture them in their own ISO9000 certified factories worldwide - with 'zero defects' as standard. They also provide this outstanding OE quality to the aftermarket. Including Standard, Platinum and Iridium, DENSO Spark Plugs cover a complete range of continually updated references. Guaranteeing optimum engine performance, choose DENSO Spark Plugs for every automotive, motorcycle, marine and small engine application. DENSO's Iridium Power Spark Plugs bring all the benefits of iridium technology to the mainstream motorist. Whatever type of car you drive - DENSO's Iridium Power Plugs are extremely tough and wear-resistant, with superb ignitability. Responding to increasingly strict European emissions legislation and the rising cost of petrol, another important benefit for motorists is that Iridium Power Plugs can improve fuel economy by up to 5% compared to standard plugs. Iridium Power is recommended for drivers who care about: PerformanceBy using a 0.4mm diameter iridium alloy centre electrode and a special ground electrode, Iridium Power realises spark performance unseen until now. It steadily gives a high level of response under a variety of driving conditions. The result? Increased acceleration and torque compared to regular plugs. MileageIf you use your car on a daily basis, you may be concerned about fuel consumption. Iridium Power is one solution. Even during idling ignition is assured, with less fuel consumption and less noise. The good ignitability from the fine electrode (0.4mm) of Iridium Power draws out much more performance from the engine. Horse PowerIridium Power has a low required voltage and a high ignitability, resulting in less misfiring and no spark, the outcome being a dramatic improvement in combustion. Engine output is therefore increased. AccelerationIridium Power best demonstrates its performance improvement during acceleration. Iridium Power has a 0.4 mm diameter iridium centre electrode and a specially shaped ground electrode. These features combine to achieve higher ignitability and require lower spark voltage than ever before. This enables high-response driving with fewer misfires than under higher required voltage spark conditions, and fewer misfires when ignitability is difficult. As a result, acceleration improves in comparison with normal plugs. Technical Information: Tech Data: Thread Ø: 14mmThread Reach: 25.0mmHex Size:16.0mm (Taper seat)Heat Range: 24Plug Type: 0.4mm Iridium centre electrode

Read more less

DENSO has been setting the standard for spark plug technology since 1959. They develop all of their ranges in-house, and manufacture them in their own ISO9000 certified factories worldwide - with 'zero defects' as standard. They also provide this outstanding OE quality to the aftermarket. Including Standard, Platinum and Iridium, DENSO Spark Plugs cover a complete range of continually updated references. Guaranteeing optimum engine performance, choose DENSO Spark Plugs for every automotive, motorcycle, marine and small engine application. DENSO's Iridium Power Spark Plugs bring all the benefits of iridium technology to the mainstream motorist. Whatever type of car you drive - DENSO's Iridium Power Plugs are extremely tough and wear-resistant, with superb ignitability. Responding to increasingly strict European emissions legislation and the rising cost of petrol, another important benefit for motorists is that Iridium Power Plugs can improve fuel economy by up to 5% compared to standard plugs. Iridium Power is recommended for drivers who care about: PerformanceBy using a 0.4mm diameter iridium alloy centre electrode and a special ground electrode, Iridium Power realises spark performance unseen until now. It steadily gives a high level of response under a variety of driving conditions. The result? Increased acceleration and torque compared to regular plugs. MileageIf you use your car on a daily basis, you may be concerned about fuel consumption. Iridium Power is one solution. Even during idling ignition is assured, with less fuel consumption and less noise. The good ignitability from the fine electrode (0.4mm) of Iridium Power draws out much more performance from the engine. Horse PowerIridium Power has a low required voltage and a high ignitability, resulting in less misfiring and no spark, the outcome being a dramatic improvement in combustion. Engine output is therefore increased. AccelerationIridium Power best demonstrates its performance improvement during acceleration. Iridium Power has a 0.4 mm diameter iridium centre electrode and a specially shaped ground electrode. These features combine to achieve higher ignitability and require lower spark voltage than ever before. This enables high-response driving with fewer misfires than under higher required voltage spark conditions, and fewer misfires when ignitability is difficult. As a result, acceleration improves in comparison with normal plugs. Technical Information: Tech Data: Thread Ø: 14mmThread Reach: 25.0mmHex Size:16.0mm (Taper seat)Heat Range: 24Plug Type: 0.4mm Iridium centre electrode

Read more less

DENSO has been setting the standard for spark plug technology since 1959. They develop all of their ranges in-house, and manufacture them in their own ISO9000 certified factories worldwide - with 'zero defects' as standard. They also provide this outstanding OE quality to the aftermarket. Including Standard, Platinum and Iridium, DENSO Spark Plugs cover a complete range of continually updated references. Guaranteeing optimum engine performance, choose DENSO Spark Plugs for every automotive, motorcycle, marine and small engine application. DENSO's Iridium Power Spark Plugs bring all the benefits of iridium technology to the mainstream motorist. Whatever type of car you drive - DENSO's Iridium Power Plugs are extremely tough and wear-resistant, with superb ignitability. Responding to increasingly strict European emissions legislation and the rising cost of petrol, another important benefit for motorists is that Iridium Power Plugs can improve fuel economy by up to 5% compared to standard plugs. Iridium Power is recommended for drivers who care about: PerformanceBy using a 0.4mm diameter iridium alloy centre electrode and a special ground electrode, Iridium Power realises spark performance unseen until now. It steadily gives a high level of response under a variety of driving conditions. The result? Increased acceleration and torque compared to regular plugs. MileageIf you use your car on a daily basis, you may be concerned about fuel consumption. Iridium Power is one solution. Even during idling ignition is assured, with less fuel consumption and less noise. The good ignitability from the fine electrode (0.4mm) of Iridium Power draws out much more performance from the engine. Horse PowerIridium Power has a low required voltage and a high ignitability, resulting in less misfiring and no spark, the outcome being a dramatic improvement in combustion. Engine output is therefore increased. AccelerationIridium Power best demonstrates its performance improvement during acceleration. Iridium Power has a 0.4 mm diameter iridium centre electrode and a specially shaped ground electrode. These features combine to achieve higher ignitability and require lower spark voltage than ever before. This enables high-response driving with fewer misfires than under higher required voltage spark conditions, and fewer misfires when ignitability is difficult. As a result, acceleration improves in comparison with normal plugs. Technical Information: Tech Data: Thread Ø: 14mmThread Reach: 25.0mmHex Size:16.0mm (Taper seat)Heat Range: 24Plug Type: 0.4mm Iridium centre electrode

Read more less

This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. After requests for a very durable, fit and forget version of our actuators that would withstand the rigors of marine corrosion or simply would not tarnish, we have now added the option of ordering any of our piston design actuators with stainless steel bodies and external components/fixings. This option does incur a surcharge and will be shown when added to your basket. Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Please contact us by email if you require more information. In The Box:1 x FMNEONACT Actuator1 x Forge Sticker This actuator is built with a Blue coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Piston option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically: Your screws will never rust You can select any colour you want! This kit is for the MK7 / 7.5 Fiesta, and it comes in 3 options Option 1. All screws in Engine bay Contents: 11x Washer - 11x Stainless Steel Screw Locations: Headlights, Wings, Bonnet latch. Option 2. All screws above, Plus 4 replacement stainless steel screws that go directly into the existing plastic clips on your slam panel;. Contents: 15x Washer - 15x Stainless steel screw. Locations: Headlights, Wings, Bonnet latch, Slam Panel Option 3. All screws above, Plus boot dress up kit! Contents: 19x Washer - 19x Stainless Steel Screw Locations: Headlights, Wings, Bonnet latch, Slam Panel, Boot You've seen these on eBay for £7, So why buy from us you ask... Well, The ones on eBay come with M6 screws. We can assure you that these screws will not fit in your car. Also, our washers are made from a premium grade aluminium and anodized to last, Unlike their cheap counter parts. Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically: Your screws will never rust You can select any colour you want! This kit is for the 8 Fiesta Including ST-Line and ST, and it comes in 2 options Option 1. All Metal screws in Engine bayContents: 12x Washer - 12x Stainless steel screw. Locations: Headlights, Wings, Bonnet latch, Slam Panel Option 2. All screws above, Plus 2 replacement stainless steel screws that go directly into the existing plastic clips on your headlight;. Contents: 14x Washer - 14x Stainless steel screw. Locations: Headlights, Wings, Bonnet latch, Slam Panel You've seen these on eBay for £7, So why buy from us you ask... Well, The ones on eBay come with M6 screws. We can assure you that these screws will not fit in your car. Also, our washers are made from a premium grade aluminium and anodized to last, Unlike their cheap counter parts. Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically: Your screws will never rust You can select any colour you want! This kit is for the MK1 focus and comes in 2 options. Option 1: Contents: 10x Washer - 10x Stainless Steel Screw Locations: Headlights and Wing. Option 2: Contents: 14x washer - 14x stainless steel screw Locations: Headlights, wing and slam panel You've seen these on eBay for £7, So why buy from us you ask... dresWell, The ones on eBay come with M6 screws. We can assure you that these screws will not fit in your car. Also, our washers are made from a premium grade aluminium and anodized to last, Unlike their cheap counter parts. Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically: Your screws will never rust You can select any colour you want! This kit is for the MK4 Ford Focus, and it comes in 2 options Option 1. All screws in Engine bay Contents: 10x Washer - 10x Stainless Steel Screw Locations: Headlights, Slam Panel (Bumper top) Option 2. All screws above, Plus 4 replacement stainless steel screws that replace the existing plastic clips on your slam panel;. Contents: 14x Washer - 14x Stainless steel screw - 4x Plastic Clip. Locations: Headlights, Slam Panel (Bumper top), Aditional Headlight Clips   You've seen these on eBay for £7, So why buy from us you ask... Well, The ones on eBay come with M6 screws. We can assure you that these screws will not fit in your car. Also, our washers are made from a premium grade aluminium and anodized to last, Unlike their cheap counter parts. Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically: Your screws will never rust You can select any colour you want! It looks the bomb! This kit is for the MK2 Focus Contents: 12x Washer - 12x Stainless Steel Screw Locations: Headlights, Wings, Slam Panel You've seen these on eBay for £7, So why buy from us you ask... Well, The ones on eBay come with M6 screws. We can assure you that these screws will not fit in your car. Also, our washers are made from a premium grade aluminium and anodized to last, Unlike their cheap counter parts. Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less