🚗 World Wide Shipping available - Contact us for a quote
CloseClose
Close

Forge Motorsport - Oil Cooler Kit for Hyundai i30N

Description

Description

Developed from our direct involvement within the BTCC and Mini Challenge race series where we have provided race proven cooling packages, we have directly transferred our knowledge from this over to our road going products. FMOC11 has been developed with the same engineering expertise that is applied to our Mini Challenge Oil coolers, these see extensive driving over the race season calendar, so we are proud to give the I30N the same motorsport treatment. Lowering your oil temps on and off the track whilst providing a product that does not skimp on quality, so much so that it is backed by our Forge Lifetime Guarantee*

With our extensive range of performance parts out on the market allowing the limits of the i30N/Veloster N to be pushed in the chase for top power gains, the addition of power and speed creates heat. Rising oil temperatures will result in only one outcome, a reduction of sufficient lubrication of your engines internal components. Therefore, the FMOC11 is a must have product for the keen driver, the location of the oil cooler radiator at the front of the vehicle’s radiator grill allows for superior air flow. During our development of this product we have seen oil temperatures reduced significantly.

The Hyundai oil cooler has its inlet and outlets placed in the correct position for optimum flow , when oil coolers are fitted upside-down this can lead to cavitation (air locks) within the system, this can over a prolonged period of time lead to engine fatigue and potentially internal component damage due to insufficient engine lubrication.


Unlike many oil cooler kits, the FMOC11 keeps the factory oil to water cooler in position. This essentially doubles your engines oil cooling. We’ve also developed the kit to use a bespoke laser cut aluminium bracket which makes for perfect fitment to the i30N crash bar. Supplied with the kit are 2x pre-assembled, high quality double braided AN-8 oil lines.


We’ve incorporated a thermostat that is built into the oil cooler sandwich plate, this has been set to open at 85C as this was observed to be the optimal working temperature of the oil cooler when testing, this means the engine is working at its most efficient oil temperature range however hard you push the vehicle.

 

The kit comes with the following:

1x Forge Aluminium sandwich plate
1x Twin pass oil cooler 
4x M6x20 fasteners
4x M6 washers
2x Oil lines 
4x M6 Rubber Riv nuts
1X M20x1.5 adaptor
All the fixings required 


 

Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product form

SKU: FMOC11

£568.07 Incl. VAT

Shipping Costs Calculated at checkout

?    Check if this item is in stock? Click Here
  • Price Match Guarantee
  • Speedy Shipping
  • Lowest Price Guarantee
International Customers please contact us for a shipping quote!
Description

Description

Developed from our direct involvement within the BTCC and Mini Challenge race series where we have provided race proven cooling packages, we have directly transferred our knowledge from this over to our road going products. FMOC11 has been developed with the same engineering expertise that is applied to our Mini Challenge Oil coolers, these see extensive driving over the race season calendar, so we are proud to give the I30N the same motorsport treatment. Lowering your oil temps on and off the track whilst providing a product that does not skimp on quality, so much so that it is backed by our Forge Lifetime Guarantee*

With our extensive range of performance parts out on the market allowing the limits of the i30N/Veloster N to be pushed in the chase for top power gains, the addition of power and speed creates heat. Rising oil temperatures will result in only one outcome, a reduction of sufficient lubrication of your engines internal components. Therefore, the FMOC11 is a must have product for the keen driver, the location of the oil cooler radiator at the front of the vehicle’s radiator grill allows for superior air flow. During our development of this product we have seen oil temperatures reduced significantly.

The Hyundai oil cooler has its inlet and outlets placed in the correct position for optimum flow , when oil coolers are fitted upside-down this can lead to cavitation (air locks) within the system, this can over a prolonged period of time lead to engine fatigue and potentially internal component damage due to insufficient engine lubrication.


Unlike many oil cooler kits, the FMOC11 keeps the factory oil to water cooler in position. This essentially doubles your engines oil cooling. We’ve also developed the kit to use a bespoke laser cut aluminium bracket which makes for perfect fitment to the i30N crash bar. Supplied with the kit are 2x pre-assembled, high quality double braided AN-8 oil lines.


We’ve incorporated a thermostat that is built into the oil cooler sandwich plate, this has been set to open at 85C as this was observed to be the optimal working temperature of the oil cooler when testing, this means the engine is working at its most efficient oil temperature range however hard you push the vehicle.

 

The kit comes with the following:

1x Forge Aluminium sandwich plate
1x Twin pass oil cooler 
4x M6x20 fasteners
4x M6 washers
2x Oil lines 
4x M6 Rubber Riv nuts
1X M20x1.5 adaptor
All the fixings required 


 

Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Useful Information Regarding Forge Motorsport

History Of Forge Motorsport

Forge Motorsport was founded in 1996 with the simple ideals of innovation, clever design, and manufacturing to the highest quality. It evolved from the original Forge Engineering which was created in 1983 to provide innovations and solutions to a variety of industries.

Our company mission states clearly our commitment and direction - 'Working together innovating automotive and engineering solutions.' This mission enables us to deliver our vision of 'instilling confidence and enabling performance in everything we do.'

With the mission and vision established and understood company wide, the design and manufacturing process is driven by a highly skilled and passionate team, who are motivated to produce a range of aftermarket tuning products that are World class.

Continued investment in our staff and our winning team culture gives Forge an unrivalled competitive advantage, allowing us to supply Forge branded products worldwide, through our extensive dealer network or through our sister companies Forge USA in Tennessee, and Forge Asia in Taichung Taiwan..

When you purchase from Forge you are not just buying a part or product, you are joining a unique global contingent of discerning consumers who truly understand value, quality, and service, making the Forge ownership a unique experience.

Our history and heritage allow Forge Motorsport to be preferred suppliers and technical partners providing Homologated parts to BTCC Mini Challenge also the leading names and race teams in the world of Motorsport including: F1, WRC, Rally X, and Le Mans. We also carry out private label work for several OEM automotive manufacturers

Forge Motorsport will deliver you something unique, something that no other manufacturer can offer. You are investing in piece of mind and the knowledge that true business integrity and care does actually exist. You are getting a lifetime of customer service on all our products with a no hassle service/warranty promise. 

You can use the link below to visit our Google Drive where all the Forge Motorsport installation guides are listed!

Once you enter the drive, the fitting guides are listed in Alphabetical order via their SKU

If you encounter any issues please get in touch!

You may also like

You may also like

Hyundai i30N MK3.5 (Facelift) Oil Cooler - Car Enhancements UK

forge Motorsport Forge Motorsport - Hyundai i30N MK3.5 (Facelift) Oil Cooler

£517.69

Forge Motorsport - Oil Cooler for Hyundai Kona N | Car Enhancements UK

forge Motorsport Forge Motorsport - Oil Cooler for Hyundai Kona N

£573.94

AIRTEC MOTORSPORT HYUNDAI I30N OIL COOLER KIT - Car Enhancements UK

Airtec AIRTEC MOTORSPORT HYUNDAI I30N OIL COOLER KIT

£408.40

Forge Motorsport - Intercooler for the Hyundai i30N Mk3.5 Facelift | Car Enhancements UK

forge Motorsport Forge Motorsport - Intercooler for the Hyundai i30N Mk3.5 Facelift

£723.98

Intercooler for Hyundai i20N - Car Enhancements UK

forge Motorsport Forge Motorsport - Intercooler for Hyundai i20N

£673.19

Uprated Intercooler for Hyundai i30N - Car Enhancements UK

forge Motorsport Forge Motorsport - Uprated Intercooler for Hyundai i30N

£713.99

Forge Motorsport - Hyundai i30N/Veloster N/Kona N Dual Catch Can and Expansion Tank - Car Enhancements UK

forge Motorsport Forge Motorsport - Hyundai i30N/Veloster N/Kona N Dual Catch Can and Expansion Tank

£499.99

Forge Motorsport Induction kit for Hyundai i20N - Car Enhancements UK

forge Motorsport Forge Motorsport - Induction kit for Hyundai i20N

£241.72

Hyundai i30N/Veloster N Boost pipe - Car Enhancements UK

forge Motorsport Forge Motorsport - Hyundai i30N/Veloster N Boost pipe

£209.56

AIRTEC Motorsport Oil Cooler for Hyundai I20N | Car Enhancements UK

Airtec AIRTEC Motorsport Oil Cooler for Hyundai I20N

£388.45

Recently viewed products

Customer Reviews

We’re looking for stars!
Let us know what you think
Close