All

The Ford Fiesta ST180 VUDU short shift is the latest installment of our signature VUDU product range. These new pieces of kit are not only built and finished in stunning T6061 billet aluminium but are also vigorously tested on our in-house race and road demo cars. This quick shift also carries the iconic VUDU logo and VUDU doll head to help make this as much of a visual accessory as it is a hardware modification. This short shift offers not only one but two different adjustable settings both 15% and 25% decreases in the shift throw. This helps to make the ride much more assertive when moving through the gears and a more engaging experience from behind the wheel. This Modification is one of ease to fit for all customers. The VUDU short shift will only take approximately 15 minutes to complete the installation and can be carried out with basic tools without the requirement of a ramp. With 10 years of motorsport knowledge and experience, we at AET Motorsport have decided to bring our very own range of products to help enhance the Ford Fiesta ST180 from a basic everyday hatchback into an exciting and road hungry hot hatch. For maximum performance, we recommend using the top locating hole. View the VUDU difference with the VUDU Short Shifter installed on the Ford Fiesta ST in one of our customers YouTube clip below:

Read more less

Reduce your stock throws with two different positions ranging from 15% and 25%. Offering 2 positions truly allows the user more options to fine tune their shift throws. Fiesta MK8 ST-200. AIRTEC part no: ATMSFO104

Read more less

The All new CEUK Torque mount for MK2 & 3 Focus CNC from a single piece of Billet aluminium for strength where it matters! The Yellow bush insert is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement. Black Bush insert Is aimed at those who like to drive hard and feel the response of the car. Ideal for extreme road driving and track use! Features 2 x Polyurethane bush inserts - Yellow Fast Road & Black Track/Race CNC from solid billet alloy, bead blasted and anodised in Gloss Black Reduces engine movement and wheel hop on hard acceleration A must for modified cars Replaces original ford cast alloy and rubber torque mount Faster gear changes due to less engine movement Can be fitted in under 30 minutes with no special tools required   Fits: Focus MK2 ST225 Focus MK2 RS Focus MK3 ST 250 Pre Facelift Focus MK3 ST 250 Facelift Focus MK3 RSPlease note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

The CEUK Torque Mount is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement. This part will fit the Fiesta 1.0 EcoBoost, ST180, ST200 & Fiesta ST150 Assisting in the complete removal of wheel hop and engine rock this part allows for instant and sustainable power!  The Yellow bush insert is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement   Features 2 x Polyurethane bush inserts CNC from solid billet alloy, bead blasted and anodised in Gloss Black Reduces engine movement and wheel hop on hard acceleration A must for modified cars Replaces original ford cast alloy and rubber torque mount Faster gear changes due to less engine movement Can be fitted in under 30 minutes with no special tools required Featuring the iconic CEUK logo    .Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

REVO ENGINE MOUNTS FORD FIESTA MK8 REAR TORQUE MOUNT OEM engine mounts are designed with very low NVH (Noise, Vibration and Harshness) in mind. While this offers the smooth ride that most drivers desire, it becomes a very limiting factor for those who prefer performance and response. The Revo rear torque mount is designed to eliminate excessive movement, allowing you to reach your true performance potential and get the power down when you need it. Manufactured from only the best materials, our design team worked closely with industry leaders Powerflex to ensure a product that will perform when you need it most. Polyurethane bushes can perform under the most extreme of conditions, ensuring strength and stability under tremendous pressures. Tuned specifically for energy transfer they offer smoother shifts and limited wheel hop, providing you with a better driving experience and increasing the opportunity to use the power your car has to offer. KEY FEATURES Dramatically reduce engine movement Smoother gear changes CAD designed for precise fitment Custom designed Powerflex bushings Full CNC machined body and locating pins   HOUSING Precision CNC machined from aircraft-grade 6061 T6 aluminium, the main housing is extremely strong yet lightweight and offers a solid base to perfectly house each polyurethane bush. Finished with an engraved Revo logo and red Powerflex bushes PINS Both pins have been specially machined to safely house the bolts to ensure precise fitment and stop any damage to the polyurethane bushings. The large bush pin is CNC machined from a single billet piece of aluminium and reduces the risk of failure from running multiple parts. The small pin is made from stainless steel to offer greater strength and increase product life.   POLYURETHANE BUSHES BY POWERFLEX Powerflex utilises a unique formula of polyurethane, custom-designed to ensure optimum fitment in the machined housings. Polyurethane is also resistant to oil, fuel unlike the rubber used in the OEM mount which can lead to perishing and failure. Using two different custom durometer bushings gives the ultimate balance of performance and comfort.   LARGE BUSHING WASHER Designed to sit the opposite side of the large pin and made from 3mm stainless steel, we have added this washer to reduce the lateral movement of the mount. By limiting the lateral movement it reduces excessive force placed on the bushes and allows for a more secure fixing of the mount between the OE plates.   FITMENT DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Ford Fiesta Rear Engine Mount Instructions NOTES Simple replacement of the OEM part Failures have been reported with the stock mounts V2 Design. A washer has been added to limit lateral movement.   VEHICLE APPLICATIONS Manufacturer Model Engine Year Ford Fiesta MK8 1.5 ST 2017 - 2022 PRE FACELIFT ONLY * For vehicles with manual gearboxes only Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Pumaspeed Fiesta Mk8 1.0l Quickshifter - Pumaspeed Billet CNC 3 different levels of throw reduction (15%, 25% or 35%) Simple installation process around 15-20 mins Made from CNC machined 6061 T6 aluminum Anodized Silver, Red, Black and Blue finishes Easily Removed in 15-20 mins NOW IN STOCK! Be amongst the first in the world to experience a shorter shift on your MK8 1.0l Ecoboost by ordering the Pumaspeed Quickshift now in stock and available for delivery! The Pumaspeed Fiesta Mk8 1.0l quickshifter is produced in top of the line T6061 billet alloy and CNC machined to absolute tolerances to give a total precision gearbox feel like a true race car.Three different positions reduce the stock shift throw by 15%, 25% or 35% depending on which hole you screw the ball into. Offering these 3 positions truly allows the end user to fine tune their shift throws.Installation is a breeze since the stock shift weight doesn't need to be removed, this saves time and simplifies the installation process which takes a genuine 15-20 mins. *Covered by Design Right* INSTALL GUIDE:

Read more less

Pumaspeed Fiesta Mk8 ST Quickshifter - Pumaspeed Billet CNC 2 different levels of throw reduction (15% or 25%) Simple installation process around 15-20 mins Made from CNC machined 6061 T6 aluminum Anodized Silver, Red, Black and Blue finishes Easily Removed in 15-20 mins NOW IN STOCK ! The Pumaspeed Fiesta Mk8 ST quickshifter is produced from T6061 billet alloy and CNC machined to absolute tolerances to give a total precision gearbox feel like a true race car. Two different positions reduce the stock shift throw by 15% or 25% depending on which hole the Stainless Steel Ball Joint is fitted into. Offering these 2 positions truly allows the end user to fine tune their shift throws. Installation is very simple and only requires basic screw drivers and a single allen key. The stock shift arm doesn't need to be removed at all so the factory shift feel is retained. This makes the installation process for the New Fiesta ST Quickshifter take a genuine 15-20 mins. *Covered by Design Right*  

Read more less

MK3 Focus ST & RS Quick Shift Made from CNC Billet Alluminium and Anodised in Black. Featuring the Iconic CEUK Logo & slogan #GetEnhanced 4 Positions for you to choose from 24% Reduction 39% Reduction 40% Reduction 25% Reduction Fitted in a matter of minutes and provided with a lifetime guarantee  

Read more less

Revo Engine Mounts More power results in more movement during aggressive acceleration. The stock engine mounts, designed to favour comfort over performance, fail to manage axle hop and torque effectively requiring you to ease off in order to gain traction. Designed to significantly reduce this engine movement, Revo engine mounts use Dual Durometer technology to minimise noise, vibration and harshness levels (NVH) while drastically improving traction and acceleration. The engine, transmission and torque mounts have been CAD designed to offer OE quality fitment with the performance benefits and quality of a Revo product. Key Features Dramatically reduce engine movement Improved acceleration and torque Dual Durometer Technology Comes with removal tool for torque mount Engine & Transmission Mount The primary design goal of the engine and transmission mounts was to provide a management system for engine movement during vehicle operation with increased power/torque, in order to retain vehicle acceleration and tyre contact during aggressive driving. The aforementioned solution must also continue to dissipate the NVH naturally created by the drivetrain. To accomplish this, the bushing design of past Revo engine mounts was retained in the MQB engine and transmission mounts, allowing Revo engineers to focus their efforts on bushing stiffness/type to accomplish the task. Torque Mount Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting the mount does not require the sub-frame to be removed, reducing installation time and the need for axle re-alignment. A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. Materials, Manufacturing & Fitment Effective design and fitment plays a principal role in managing engine movement to ensure optimal acceleration and tyre contact with the road while dissipating NVH experienced from the drivetrain. Each component has been designed using CAD technology to ensure precision fitment and is supplied with class 12.9 hardware to replace the standard fixings. To ensure optimum strength and durability, brackets and housings are CNC machined from 6061-billet aluminium and finished with an anodised coating to protect from heat and corrosion. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructionsDownload the Revo MQB Engine Mount Instructions HERE Fitting instructionsDownload the Revo MQB Torque Mount Instructions HERE Fitting instructionsDownload the Revo MQB Transmission Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull kit includes engine mount, transmission mount , torque mount and torque mount installation tool Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards

Read more less

Revo Torque MountMore power results in more movement during aggressive acceleration. The stock torque mount is designed to offer comfort over performance and does not manage engine movement effectively. Designed to significantly reduce the loss of torque and drastically improve traction and acceleration, the Revo Torque mount has little to no effect on vibration and harshness levels (NVH) felt in the cabin. Key Features Dramatically reduce drivetrain movement Improved acceleration and torque Simple and easy to install with tool included Doesn't require sub-frame removal for installation Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting Kit A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. This allows the OEM part to be removed and the Revo part to be installed without removing the sub-frame, reducing installation time and the need for axle re-alignment. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructions Download the Revo MQB Torque Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull Mount Kit available, including Engine, Transmission and Torque mount Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Please note: yellow bushes have now been discontinued until further notice on this mount! This mount is for the PRE FACELIFT MK8 Fiesta Only - 2017-2022 AIRTEC Motorsport billet torque mount for the Mk8 Fiesta ST-Line & ST (200PS). The perfect upgrade for everyday use and the odd track day with standard yellow bushes, close to standard driving experience without the excessive engine movement. The purple bush insert is aimed at track and race and slightly firmer than the yellow bush, not recommended for everyday use. Very close to 'solid' and will increase cabin noise! Purple bushes massively reduces engine movement for faster gear changes. The ultimate 'Black Series' bush insert purely for track and race use! The black series bush offers the most precise and accurate driving experience. Almost 100% solid, this is only aimed at the most hard-core track day or serious, hard, fast road use! Features: 6x Polyurethane bushes CNC solid billet alloy and anodised in satin black Hugely reduces engine movement and wheel hop on harsh acceleration A must have upgrade for tunes and modified cars Replaces the standard Ford torque mount Faster gear changes due to less engine movement Can be fitted in under 30 minutes with no special tools required Designed and made at AIRTEC HQ Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Introducing the all new CEUK Enhanced Performance Short Shift for Fiesta ST180 & ST200   Reduce your stock shift throws with two different positions, ranging from 15% or 25%. Offering 2-positions truly allows the user more options to fine tune their shift throws! With a quick and easy installation process the stock shift weight does not need to be removed. This saves time and makes the installation quick and easy. Made from CNC machined aluminum then anodised black. CEUK Engraved Logo All hardware is 100% stainless steel including the ball stud 2-position adjustable between (15% or 25%) reduction Completely reversible Installs in approx. 15 minutes Simple DIY fitting: Remove gear selector cable from original shifter, using long nose pliers or mole grips Install top section of new short shifter which will locate it's self due to cut out underneath top section Then install lower section and new bolts and tighten, simply reconnect gear selector cable

Read more less

The Original German quick shift 'Progress through technology' Reduce gear changes by up to 30%, faster gear changes = faster cars Features Billet Alloy construction with stainless steel ball end Reduce gear changes by upto 30% Easy DIY job, takes approximately 10-15 minutes to install Fits both ST & RS Models Comes with full fitting instructions

Read more less

Replacement bushes to fit the Focus Mk2 /Mk3 torque mount. The Yellow bush insert is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement. The Purple Bush insert is aimed @ track and race, not recommended for everyday use as the bush is close to solid and will increase cabin noise (not that bad actually) but massivley reduces engine movement for faster gear changes New Black Series Bush insert Ultimate performance motorsport track and race bushes offering the most precise and accurate driving experience. This bush is nearly 100% solid and is only aimed at the most hard-core track day or serious hard fast road use. Please note: BUSHES ONLY, This does not include CNC alloy mount

Read more less

A Must on Modified Cars - New Lower Rear Torque Link Seriously Reduces Engine Pitching Forwards and Backwards - As tested on our 385Bhp demo CarPlease note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Fiesta Mk7 ST180 engine stabilizer mount. Designed and manufactured ‘in house’ the mount features Powerflex bushes and is a direct replacement for the OE item Made from high grade CNC machined HE30 aluminum our design significantly reduces engine movement/pitch and improves traction under maximum load.Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Ford Focus Rear Torque Mount OEM engine mounts are designed with very low NVH (Noise, Vibration and Harshness) in mind. While this offers the smooth ride that most drivers desire, it becomes a very limiting factor for those who prefer performance and response. The Revo rear torque mount is designed to eliminate excessive movement, allowing you to reach your true performance potential and get the power down when you need it. Manufactured from only the best materials, our design team worked closely with industry leaders Powerflex to ensure a product that will perform when you need it most. Polyurethane bushes can perform under the most extreme of conditions, ensuring strength and stability under tremendous pressures. Tuned specifically for energy transfer they offer smoother shifts and limited wheel hop, providing you with a better driving experience and increasing the opportunity to use the power your car has to offer. Material Precision CNC machined from aircraft grade 6061 T6 aluminium, the main housing is extremely strong yet lightweight and is recessed to perfectly seat the polyurethane bush. Finished with an engraved Revo logo red Powerflex bushes and powder coated in black for durability and longevity. The machined insert is encapsulated in polyurethane during the moulding process to ensure a stronger fixing point. Precision Design Designed by our engineering team using the latest CAD software, the Revo Focus rear torque mount directly replaces the OEM mount. 3D printing technology allows rapid prototyping for fitment testing, allowing the team to make the smallest of modifications to offer you the perfect product.   Polyurethane Bushes by Powerflex Powerflex utilise a unique formula of polyurethane, custom designed to ensure optimum fitment in the machined housings. After testing of various amounts of compliance, our engineers were able to fine tune the final bush to achieve a balance between performance and comfort. Polyurethane is also resistant to oil, fuel unlike the rubber used in the OEM mount which can lead to perishing and failure. Our specified durometers provide a stiffer mount to limit the engine movement without compromising on NVH (Noise Vibration Harshness) levels in the process. Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Our AIRTEC Motorsport torque mount delivers on every level, from quality, price and usability. The Yellow bush insert is perfect for everyday use and the odd track day, close to standard driving experience without the excessive engine movement.The Purple Bush insert is aimed @ track and race, not recommended for everyday use as the bush is close to solid and will increase cabin noise (not that bad actually) but massively reduces engine movement for faster gear changes. New Black Series Bush insert Ultimate performance motorsport track and race bushes offering the most precise and accurate driving experience. This bush is nearly 100% solid and is only aimed at the most hard-core track day or serious hard fast road use. Features: 2 x Polyurethane bush inserts – Yellow Fast Road & Purple Track/Race CNC from solid billet alloy, bead blasted and anodised in satin Black Reduces engine movement and wheel hop on hard acceleration A must for modified cars Replaces original ford cast alloy and rubber torque mount Faster gear changes due to less engine movement Can be fitted in under 30 minutes with no special tools required This is why we choose Power Flex:The company operates in a self-contained state of the art factory, manufacturing everything in-house. The stainless steel components are machined on the latest computer controlled equipment to ensure perfect repeatability and quality. The moulding and tooling, design and manufacturing is carried out within the factory ensuring very rapid response time to special projects and complete communication between development, prototyping, testing and manufacturing departments. Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right first time quality. Testing of new components is carried out both on the vehicle and on test rigs. Fits:Focus MK2 ST & RSFocus MK3 ST 250Focus MK3 RS  

Read more less

Revo Engine Mounts Ford Fiesta MK7 Rear Torque Mount OEM engine mounts are designed with very low NVH (Noise, Vibration and Harshness) in mind. While this offers the smooth ride that most drivers desire, it becomes a very limiting factor for those who prefer performance and response. The Revo rear torque mount is designed to eliminate excessive movement, allowing you to reach your true performance potential and get power down when you need it. Manufactured from only the best materials, our design team worked closely with industry leaders Powerflex to ensure a product that will perform when you need it most. Polyurethane bushes can perform under the most extreme of conditions, ensuring strength and stability under tremendous pressures. Tuned specifically for energy transfer they offer smoother shifts and limited wheel hop, providing you with a better driving experience and increasing the opportunity to use the power your car has to offer. Key Features Dramatically reduce engine movement Smoother gear changes CAD designed for precise fitment Custom designed Powerflex bushings Full CNC machined body and locating pins Design Designed by our engineering team using the latest CAD software, the Revo Fiesta rear torque mount directly replaces the OEM mount. 3D printing technology allows rapid prototyping for fitment testing, allowing the team to make the smallest of modifications to offer you the perfect product. Material Precision CNC machined from aircraft grade 6061 T6 aluminium, the main housing and pin are extremely strong yet lightweight. and are recessed to perfectly seat each polyurethane bush. Finished with an engraved Revo logo red Powerflex bushes and powder coated in black for durability and longevity. Strength Designed specifically for strength, the pins also shield the bushings from the bolt to avoid damaging them during installation. Unlike other aftermarket mounts, the fixing pin has been made using a single machined piece to ensure strength and fitment tolerances are met. Bushes Powerflex utilise a unique formula of polyurethane, custom designed to ensure optimum fitment in the machined housings. After testing of various amounts of compliance, our engineers were able to fine tune the final bush to achieve a balance between performance and comfort. Polyurethane is also resistant to oil, fuel unlike the rubber used in the OEM mount which can lead to perishing and failure. Our specified durometers provide a stiffer mount to limit the engine movement without compromising on NVH (Noise Vibration Harshness) levels in the process. Technical Documents Fitting Instructions can be found Here Vehicle Applications Ford Fiesta MK7 1.6 ST 2013 onwards Ford Fiesta MK7 1.0 EcoBoost 2012 onwards Ford Fiesta MK6 2.0 2005 - 2011 Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

This is a billet alum replacement arm for the heavy stock cast iron unit. Has 4 pivot point choices plus two of which moves the shifter forward 25mm. Gets rid of the heavy stock shifter feel. Give your shifter a speedy feel with notchy positive shifts and more mechanical connection to your car.P1 24% reduction plus moves shifter forward 25mmP2 39% reduction plus moves shifer forward 25mmP3 40% reduction stock shifter locationP4 25% reduction stock shifter location

Read more less

Reduce your stock shift throws with two different positions, ranging from 15% or 25%. Offering 2-positions truly allows the user more options to fine tune their shift throws! With a quick and easy installation process the stock shift weight does not need to be removed. This saves time and makes the installation quick and easy. Made from CNC machined aluminium with engraved AIRTEC Motorsport logo All hardware is 100% stainless steel including the ball stud. 2-position adjustable between (15% or 25%) reduction Completely reversible Installs in approx. 15 minutes Simple DIY fitting: Remove gear selector cable from original shifter, using long nose pliers or mole grips. Install top section of new short shifter which will locate it’s self due to cut out underneath top section. Then install lower section and new bolts and tighten, simply reconnect gear selector cable. 15% (Lower hole) or 25% (Top hole).

Read more less

This is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement. This part will fit the Fiesta 1.0 EcoBoost, ST180, ST200 & Fiesta ST150   The Yellow bush insert is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement.   The Purple Bush insert is aimed @ track and race, not recommended for everyday use as the bush is close to solid and will increase cabin noise (not that bad actually) but massivley reduces engine movement for faster gear changes   New Black Series Bush insert Ultimate performance motorsport track and race bushes offering the most precise and accurate driving experience. This bush is nearly 100% solid and is only aimed at the most hard-core track day or serious hard fast road use.   Features 2 x Polyurethane bush inserts CNC from solid billet alloy, bead blasted and anodised in satin Black Reduces engine movement and wheel hop on hard acceleration A must for modified cars Replaces original ford cast alloy and rubber torque mount Faster gear changes due to less engine movement Can be fitted in under 30 minutes with no special tools required   This is why we choose Power Flex The company operates in a self-contained state of the art factory, manufacturing everything in-house. The stainless steel components are machined on the latest computer controlled equipment to ensure perfect repeatability and quality. The moulding and tooling, design and manufacturing is carried out within the factory ensuring very rapid response time to special projects and complete communication between development, prototyping, testing and manufacturing departments. Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right first time quality. Testing of new components is carried out both on the vehicle and on test rigs.Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less