FREE SHIPPING ON ALL EXHAUSTS (UK Mainland Only)
TrustPilot Rating 4.6 ★★★★☆ - EXCELLENT - Read our 840+ Reviews

CloseClose
CloseClose
Close

CEUK Shop

307 products

Date, new to old

  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
    • Wide Mouth / Snorkel - MK4 / 4.5 Ford Focus

      Wide Mouth / Snorkel - MK4 / 4.5 Ford Focus

      Wide Mouth / Snorkel / Big Mouth / RamAir Snorkel - MK4 / 4.5 Focus Injection moulded and manufactured from ABS, not 3D printed like others! Bolts straight in place (No Fitting Kit Supplied)  Available in multiple colours. Enables cold air from the grille to be sucked directly into the air feed and straight to the airbox.

      £48.00

    • Enhanced Edition Double Boot Light Kit - Full Replacement LED Boot Unit - MK4 Focus

      Enhanced Edition Double Boot Light Kit - Full Replacement LED Boot Unit - MK4 Focus

      0 Reviews

      A standard boot bulb not bright enough? The LED bulb just not quite cutting it? One unit just not giving you enough? This is for you! The all new Double Boot Kit with Full LED replacement Unit is here, and features a whopping 18 LED'S Per side that are all pointing in the direction that you need it! 5x Brighter than our boot bulb upgrade alone and 18x brighter than OEM, this really is Enhanced! And thats just per side! This fully replaces the OEM unit and bulb to look fully OEM once installed! This kit does require you to trim the boot plastic to create a hole for the new unit to sit. When you remove the trim, there is a cutting template on the rear of the panel to follow! Specs: Long Life Span & Fully Error Free Low Power Consumption with High Lumen Output Simple to install - Takes just Minutes after the cutting is complete 12v | 5000K White OR Choice Of Colour | Direct OEM Plug Fitment Confirmed Fitting Vehicles (May Fit Others Not Listed): MK4 Focus All Models (Including Facelift) Whats in the kit? 2x 18SMD Full Replacement Boot Units 1x Wiring Loom Extension How does this kit work? The kit uses the single plug already in place that plugs to your current boot light, the extension has a splitter at the connection end and then enough cable to route to the other side of the boot to reach the second unit, so both light units are powered off a single connection. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.

      £34.00

    • PlexiClick® - Invisible Number Plate Holder Clip

      PlexiClick® - Invisible Number Plate Holder Clip

      This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

      £10.00

    • Set of 4 vinyl logo stickers

      Set of 4 vinyl logo stickers

      Set of 4 vinyl stickers to use interior or exterior  the possibilities are endless  Approx 3cm   

    • Number Plate Tags - Electric Vehicles (EV)

      Number Plate Tags - Electric Vehicles (EV)

      Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

    • Number Plate Tags - Ford Logo's

      Number Plate Tags - Ford Logo's

      Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

    • Replacement Door Sill Plates - Car Enhancements UK

      Ford Replacement Door Sill Plates

      For nearly 10 years, CEUK have offered illuminated door sills, in various colours and styles! But we had a thought, what about those customers who want a fancy sill plate to greet them on entry to their vehicle, but arent necessarily bothered about it lighting up? And up we came with this! Made from a Dual layer premium Acrylic, our door sills are built on a 2mm acrlyic backing plate with a 3mm face plate in any colour of your choice!  Then, you can choose your design and design colours accordingly! These are supplied as pairs and come fully built up ready to install using the 3m Tape already affixed to the underside! Simply clean the area, remove the backing tape and stick in place - away you go! These are truly universal and will fit any 3 or 5 door vehicle! Please note, they do not light up! Build your own: The base plate is always GLOSS BLACK - this can not be seen! Face Plate: This is the colour of the sill that you will see (Black in our images, Matte Black is recommended) Accent Colour: This is the design at either side of the logo - EG the lines Logo Colour: The colour you want of the logo in the centre! Measurements: 50cm Sill 60cm Sill CM MM Width: 50cm Width: 500mm Width: 60cm Width: 600mm Height: 5cm Height: 50mm Height: 5cm Height: 50mm Thickness: 0.5cm Thickness: 5mm Thickness: 0.5cm Thickness: 5mm Customisation: Want something totally custom and unique to you? Drop us an email at support@ceuk.org with your ideas, and we'd love to offer you a quote! ETA This product being fully customisable to your tastes is made to order and the lead time may be a couple of working days during busy times!

      £25.00 - £30.00

    • CEUK Rear Bumper reflector Guards - MK4 & MK4.5 Focus (All Models - Estate) - Car Enhancements UK

      CEUK Rear Bumper reflector Guards - MK4 & MK4.5 Focus (All Models - Estate)

      0 Reviews

      CEUK Rear Reflector Guards for the MK4 and MK4.5 Focus (all models). ESTATE ONLY Fits all models of the MK4 and MK4.5 2017-2024 Focus ESTATE Protect your rear reflector whilst adding some style at the same time! Cut from Premium 2mm Acrylic these don't just protect, but #Enhance Available in Premium Gloss Black 2 different designs to choose from Cut from Premium 2mm Acrylic Solid 3M Adhesive installation - will not fall off! Perfect Fit Designed & Manufactured in CEUK HQ West Yorkshire The design is cut into the guard so the reflector shows through Instructions are provided however they are self explanatory - remove the backing paper to expose the weatherproof 3M adhesive and hold firmly in place for upto 30 seconds whilst it affixes! Why? They just look cool!! Whats in the Kit: 2x Fog Guards (Left & Right) Double Sided Weatherproof Tape (Already applied) Instructions Please ensure you have some Isopropanol Alcohol or an Alcohol wipe to clean the area before application!  

      £12.00

    • Sale -10% MK8 Fiesta - OEM Style Footwell Light Unit Upgrade - Car Enhancements UK

      MK4 Focus - OEM Style Footwell Light Unit Upgrade

      0 Reviews

      An enhanced Edition treat in the form of our ridiculously bright footwell upgrade for the MK4 Focus - Now as a full complete replacement unit. Unit is for NONE COLOUR CHANGING footwell lights only - This will NOT work with cars that have colour changing footwell lights! What have we done? Not only have we taken the OEM chip board which features just a measly 1 LED chip and added an additional 11 - giving you a total of 12 SMD's. We've gone further! The OEM housing is frosted, giving a diffused look and output. This has been done by Ford to mask the poor performance of a single LED chip - and allow the light to be dispursed around the area rather than directional; This also dulls the light output by about 30% Clearest Unit Ever! Our brand new unit is 100% Clear, which stops the dulling affect of the output; When you couple this with 12x more LED's than standard, well the numbers speak from themselves! This is a totally brand new pioneering product designed & created by our Enhanced Edition team in the UK! We believe Every single MK4 has the wiring for the Footwell lights (The ST has Footwell lights and we have found wiring In all lower spec MK4 Focus during testing) - under your Footwell there will be a hole - the wiring should be inside this hole, often clipped up behind the streering wheel panel.! A powerful 12SMD Led board (OEM Unit has 1smd) available in 4 colours - which adds both ambience and brilliance to your interior When do they work? 1: when you open the door of your vehicle 2: when you switch the engine off after a drive 3: when your Engine is switched on (giving interior Ambience during drives) The lights Mimic your ambient lighting, and will come on when the doors are opened, or the headlights are switched on! have you been #Enhanced  Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.   Please Note - Green & Orange is not currently available in the oem style unit! WATCH THE LAUNCH VIDEO

      £20.00£18.00

    • Sale -22% #Enhanced Edition LED H7 Mini - Car Enhancements UK

      Enhanced Edition LED H7 Mini

      0 Reviews

      Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

      £54.00£42.00

    • ST Logo Replacement (Small)

      ST Logo Replacement (Small)

      Small ST logo Designed to work with our Cup Holders and Fog Guards which have a section for the ST logo to be placed supplied with a 3M backing in many colours. Sold as Singles  

    • CEUK Rear Bumper reflector Guards - MK4 & MK4.5 Focus (All Models - Hatchback) - Car Enhancements UK

      CEUK Rear Bumper reflector Guards - MK4 & MK4.5 Focus (All Models - Hatchback)

      0 Reviews

      CEUK Rear Reflector Guards for the MK4 and MK4.5 Focus (all models). HATCHBACK ONLY Fits all models of the MK4 and MK4.5 2017-2024 Focus Hatchback Protect your rear reflector whilst adding some style at the same time! Cut from Premium 2mm Acrylic these don't just protect, but #Enhance Available in Premium Gloss Black 4 different designs to choose from Cut from Premium 2mm Acrylic Solid 3M Adhesive installation - will not fall off! Perfect Fit Designed & Manufactured in CEUK HQ West Yorkshire The design is cut into the guard so the reflector shows through - should you wish to have a coloured ST logo insert for your guards these are sold separately here Instructions are provided however they are self explanatory - remove the backing paper to expose the weatherproof 3M adhesive and hold firmly in place for upto 30 seconds whilst it affixes! Why? They just look cool!! Whats in the Kit: 2x Fog Guards (Left & Right) Double Sided Weatherproof Tape (Already applied) Instructions Please ensure you have some Isopropanol Alcohol or an Alcohol wipe to clean the area before application!  

      £12.00

    • #Enhanced Edition LED H8/11 Mini Fog Unit - Car Enhancements UK

      Enhanced Edition LED H8/11 Mini Fog Unit

      0 Reviews

      Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

      £42.00

    • Sale -44% *** CLEARANCE*** Ford Performance Number Plate Holder Set of 2 - SMALL DEFECTS - Car Enhancements UK

      *** CLEARANCE*** Ford Performance Number Plate Holder Set of 2 - SMALL DEFECTS

      0 Reviews

      Out of stock

      CLEARANCE ITEM- ITEMS ARE NONE RETURNABLE AD HAVE NO WARRANTY. PLEASE SEE PICTURES AS THESE ITEMS BOTH HAVE SMALL DEFECTS ON THEM.    Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates. Best quality guaranteed!

      Out of stock

      £36.00£20.00

    • Enhanced Edition - VW Audi Group OEM Footwell Unit Upgrade (Ultra Bright) - Car Enhancements UK

      Enhanced Edition - VW Audi Group OEM Footwell Unit Upgrade (Ultra Bright)

      0 Reviews

      Ultra bright footwell Unit upgrade for the Golf MK7 - Now as a FULL REPLACEMENT UNIT! We’ve implemented our Enhanced Edition technology into an ultra bright footwell upgrade for this VW Legend Please note for these to fit your vehicle must already have footwell lights installed, as these are a direct replacement for Factory footwell units upto 36X brighter than a standard footwell light and available in 3 colours The unit features 18 Ultra bright SMD chips (Which each chip is 2x brighter than oem) and is placed inside a fully replacement unit designed to disperse the light effectivly and efficiently, to give you an ultra bright footwell WITHOUT impeding visibility when driving! Confirmed Fitment: VW Caddy 2004-2012 VW EOS 2006 > VW Golf MK5 VW Golf MK6 VW Golf MK7 VW Jetta MK5 VW Passat B6 VW Polo MK5 VW Tiguan MK1 Skoda Superb MK2 MAY FIT OTHER VAG GROUP MODELS - PLEASE ENQUIRE VIA EMAIL May also fit in other areas of the car such as Boot & Glove Box on some models. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.

      £18.00

    • DSG "RS" Carbon Replacement Shift Knob & Gator - Car Enhancements UK

      DSG "RS" Carbon Replacement Shift Knob & Gator

      Genuine Carbon fibre replacement DSG shifter knob with Black Trim & button, supplied with Black Gator & Red stitching! The knob is a direct replacement, this simply has a twist clip which clips straight on once the OEM knob is removed! The gator requires attachment to the plastic trim found in your car (Existing gator is usually stapled to it!)   You can use staples, glue, needle and thread or other methods to attach the new gator to your existing plastic trim. This is second to none in terms of quality and will give your audi a Premium feel, how it should be! Will only fit on vehicles with the plastic trim shape shown below. Please contact us if you are unsure

      £120.00

    • Sale -10% Enhanced Edition 955 (T15) LED indicator upgrade - canbus friendly - Car Enhancements UK

      Enhanced Edition 955 (T15) LED indicator upgrade - canbus friendly

      955 (T15) LED indicator upgrade  these replace any wedge fit indicator bulbs for ultra bright LED canbus friendly alternative  upgrade your output today and be sure to never be missed again! 5x brighter than OEM - Canbus friendly in most vehicles 

      £20.00£18.00

    • 4D "R Line" Replacement Badges - Multiple Colours - VW MODELS - Car Enhancements UK

      4D "R Line" Replacement Badges - Multiple Colours - VW MODELS

      0 Reviews

      Replace your Awful Chrome R Line badges (Or add to cars without) with our full 4D Replacement Made from Premium 3mm Acrylic (6mm total with 2 colours) these come with 3M Tape already applied to stick straight on in place of your existing badges on your boot lid! Using the latest in Laser technology, these badges are cut with a smooth edge for a perfect finish! And using 3M's best Out door tape, which gets stronger in adverse weather conditions guaranteeing you will never lose them! Create your own look, with ANY colour Backing (Black on our badge) and Front (White on our badge) to give you a truly Unique experience! The price shown is for 1 Badge (105mm x 38mm) This is NOT a Gel Inlay - Your OEM Badge will need to be removed

      £10.00

    • Sale -17% CEUK Fog Guards - Transit Custom (Round Fog Light) - Car Enhancements UK

      CEUK Fog Guards - Transit Custom (Round Fog Light)

      THIS PRODUCT CAN ONLY BE INSTALLED WITH LED FOG LIGHT BULBS DUE TO THE HEAT EMITTED FROM THE STANDARD HALOGEN BULB! BY PURCHASING YOU ARE CONFIRMING YOU HAVE LED FOG LIGHTS INSTALLED! CEUK Fog Guards for the Rounded Fog Light - Ford. Fits All models with a round Fog Light, Including 60mm and 70mm fog covers. Protect your fog lights whilst adding some colour or style at the same time! Vacuum formed and Cut from Premium ABS these don't just protect, but #Enhance Available in 3 cool designs - Gloss Black Vacuum formed right here in the UK Logo then CNC cut from the formed piece. Solid "2Secure" installation - will not fall off! Perfect Fit Designed & Manufactured in North England. Instructions are provided however they are self explanatory - affixed via 2 Super Secure double sided gel strips and held firmly in place by your fog surround! Why? They just look cool!! Unlike other manufacturers in the market place we've taken the feedback and improved on various flaws with other designs. This product sits firmly on the full fog lense and is held in place by double sided strips of gel tape, as well as the fog surround itself. Not only does this mean you will never lose the product, but it also removes the gastly double sided gel dot supplied by other manufacturers that sits right in the centre of the lense. Our product also does not suffer from a light bleed or ring around the exterior, as it is the full size of the fog light unit. Whats in the Kit: 2x Fog Guards (Left & Right) 6x Double Sided Gel Strips cut to size (Self Application) Instructions Fitting Kit (Optional) If you select no to fitting kit, Please ensure you have a trim removal tool. Fits: Ford Fiesta MK6 All Models Ford Fiesta MK7 All Models Ford Focus MK2 All Models Ford Focus MK3 All Models (Pre Facelift only with circle fogs) Ford Transit Custom Pre Facelift All Models Ford Transit Connect Any other Ford with Round Fog Lights (within reason) Fitting kit includes Trim Removal tool & Alcohol Wipe

      £16.00 - £17.00

    • Sale -17% CEUK Fog Guards - MK3 Focus - All Models (Pre Facelift Round Fog) - Car Enhancements UK

      CEUK Fog Guards - MK3 Focus - All Models (Pre Facelift Round Fog)

      THIS PRODUCT CAN ONLY BE INSTALLED WITH LED FOG LIGHT BULBS DUE TO THE HEAT EMITTED FROM THE STANDARD HALOGEN BULB! BY PURCHASING YOU ARE CONFIRMING YOU HAVE LED FOG LIGHTS INSTALLED! CEUK Fog Guards for the Rounded Fog Light - Ford. Fits All models with a round Fog Light, Including 60mm and 70mm fog covers. Protect your fog lights whilst adding some colour or style at the same time! Vacuum formed and Cut from Premium ABS these don't just protect, but #Enhance Available in 3 cool designs - Gloss Black Vacuum formed right here in the UK Logo then CNC cut from the formed piece. Solid "2Secure" installation - will not fall off! Perfect Fit Designed & Manufactured in North England. Instructions are provided however they are self explanatory - affixed via 2 Super Secure double sided gel strips and held firmly in place by your fog surround! Why? They just look cool!! Unlike other manufacturers in the market place we've taken the feedback and improved on various flaws with other designs. This product sits firmly on the full fog lense and is held in place by double sided strips of gel tape, as well as the fog surround itself. Not only does this mean you will never lose the product, but it also removes the gastly double sided gel dot supplied by other manufacturers that sits right in the centre of the lense. Our product also does not suffer from a light bleed or ring around the exterior, as it is the full size of the fog light unit. Whats in the Kit: 2x Fog Guards (Left & Right) 6x Double Sided Gel Strips cut to size (Self Application) Instructions Fitting Kit (Optional) If you select no to fitting kit, Please ensure you have a trim removal tool. Fits: Ford Fiesta MK6 All Models Ford Fiesta MK7 All Models Ford Focus MK2 All Models Ford Focus MK3 All Models (Pre Facelift only with circle fogs) Ford Transit Custom Pre Facelift All Models Ford Transit Connect Any other Ford with Round Fog Lights (within reason) Fitting kit includes Trim Removal tool & Alcohol Wipe

      £16.00 - £17.00

    • Sale -17% CEUK Fog Guards - MK2 & 2.5 Focus - All Models - Car Enhancements UK

      CEUK Fog Guards - MK2 & 2.5 Focus - All Models

      THIS PRODUCT CAN ONLY BE INSTALLED WITH LED FOG LIGHT BULBS DUE TO THE HEAT EMITTED FROM THE STANDARD HALOGEN BULB! BY PURCHASING YOU ARE CONFIRMING YOU HAVE LED FOG LIGHTS INSTALLED! CEUK Fog Guards for the Rounded Fog Light - Ford. Fits All models with a round Fog Light, Including 60mm and 70mm fog covers. Protect your fog lights whilst adding some colour or style at the same time! Vacuum formed and Cut from Premium ABS these don't just protect, but #Enhance Available in 3 cool designs - Gloss Black Vacuum formed right here in the UK Logo then CNC cut from the formed piece. Solid "2Secure" installation - will not fall off! Perfect Fit Designed & Manufactured in North England. Instructions are provided however they are self explanatory - affixed via 2 Super Secure double sided gel strips and held firmly in place by your fog surround! Why? They just look cool!! Unlike other manufacturers in the market place we've taken the feedback and improved on various flaws with other designs. This product sits firmly on the full fog lense and is held in place by double sided strips of gel tape, as well as the fog surround itself. Not only does this mean you will never lose the product, but it also removes the gastly double sided gel dot supplied by other manufacturers that sits right in the centre of the lense. Our product also does not suffer from a light bleed or ring around the exterior, as it is the full size of the fog light unit. Whats in the Kit: 2x Fog Guards (Left & Right) 6x Double Sided Gel Strips cut to size (Self Application) Instructions Fitting Kit (Optional) If you select no to fitting kit, Please ensure you have a trim removal tool. Fits: Ford Fiesta MK6 All Models Ford Fiesta MK7 All Models Ford Focus MK2 All Models Ford Focus MK3 All Models (Pre Facelift only with circle fogs) Ford Transit Custom Pre Facelift All Models Ford Transit Connect Any other Ford with Round Fog Lights (within reason) Fitting kit includes Trim Removal tool & Alcohol Wipe

      £16.00 - £17.00

    • Sale -17% CEUK Fog Guards - MK6 & MK6.5 Fiesta - All Models - Car Enhancements UK

      CEUK Fog Guards - MK6 & MK6.5 Fiesta - All Models

      THIS PRODUCT CAN ONLY BE INSTALLED WITH LED FOG LIGHT BULBS DUE TO THE HEAT EMITTED FROM THE STANDARD HALOGEN BULB! BY PURCHASING YOU ARE CONFIRMING YOU HAVE LED FOG LIGHTS INSTALLED! CEUK Fog Guards for the Rounded Fog Light - Ford. Fits All models with a round Fog Light, Including 60mm and 70mm fog covers. Protect your fog lights whilst adding some colour or style at the same time! Vacuum formed and Cut from Premium ABS these don't just protect, but #Enhance Available in 3 cool designs - Gloss Black Vacuum formed right here in the UK Logo then CNC cut from the formed piece. Solid "2Secure" installation - will not fall off! Perfect Fit Designed & Manufactured in North England. Instructions are provided however they are self explanatory - affixed via 2 Super Secure double sided gel strips and held firmly in place by your fog surround! Why? They just look cool!! Unlike other manufacturers in the market place we've taken the feedback and improved on various flaws with other designs. This product sits firmly on the full fog lense and is held in place by double sided strips of gel tape, as well as the fog surround itself. Not only does this mean you will never lose the product, but it also removes the gastly double sided gel dot supplied by other manufacturers that sits right in the centre of the lense. Our product also does not suffer from a light bleed or ring around the exterior, as it is the full size of the fog light unit. Whats in the Kit: 2x Fog Guards (Left & Right) 6x Double Sided Gel Strips cut to size (Self Application) Instructions Fitting Kit (Optional) If you select no to fitting kit, Please ensure you have a trim removal tool. Fits: Ford Fiesta MK6 All Models Ford Fiesta MK7 All Models Ford Focus MK2 All Models Ford Focus MK3 All Models (Pre Facelift only with circle fogs) Ford Transit Custom Pre Facelift All Models Ford Transit Connect Any other Ford with Round Fog Lights (within reason) Fitting kit includes Trim Removal tool & Alcohol Wipe

      £16.00 - £17.00

    • Sale -17% CEUK Fog Guards - MK7 & MK7.5 Fiesta - All Models - Car Enhancements UK

      CEUK Fog Guards - MK7 & MK7.5 Fiesta - All Models

      THIS PRODUCT CAN ONLY BE INSTALLED WITH LED FOG LIGHT BULBS DUE TO THE HEAT EMITTED FROM THE STANDARD HALOGEN BULB! BY PURCHASING YOU ARE CONFIRMING YOU HAVE LED FOG LIGHTS INSTALLED! CEUK Fog Guards for the Rounded Fog Light - Ford. Fits All models with a round Fog Light, Including 60mm and 70mm fog covers. Protect your fog lights whilst adding some colour or style at the same time! Vacuum formed and Cut from Premium ABS these don't just protect, but #Enhance Available in 3 cool designs - Gloss Black Vacuum formed right here in the UK Logo then CNC cut from the formed piece. Solid "2Secure" installation - will not fall off! Perfect Fit Designed & Manufactured in North England. Instructions are provided however they are self explanatory - affixed via 2 Super Secure double sided gel strips and held firmly in place by your fog surround! Why? They just look cool!! Unlike other manufacturers in the market place we've taken the feedback and improved on various flaws with other designs. This product sits firmly on the full fog lense and is held in place by double sided strips of gel tape, as well as the fog surround itself. Not only does this mean you will never lose the product, but it also removes the gastly double sided gel dot supplied by other manufacturers that sits right in the centre of the lense. Our product also does not suffer from a light bleed or ring around the exterior, as it is the full size of the fog light unit. Whats in the Kit: 2x Fog Guards (Left & Right) 6x Double Sided Gel Strips cut to size (Self Application) Instructions Fitting Kit (Optional) If you select no to fitting kit, Please ensure you have a trim removal tool. Fits: Ford Fiesta MK6 All Models Ford Fiesta MK7 All Models Ford Focus MK2 All Models Ford Focus MK3 All Models (Pre Facelift only with circle fogs) Ford Transit Custom Pre Facelift All Models Ford Transit Connect Any other Ford with Round Fog Lights (within reason) Fitting kit includes Trim Removal tool & Alcohol Wipe

      £16.00 - £17.00

    • Number Plate Frame - Audi Variants (Multiple Logo's) - Car Enhancements UK

      Number Plate Frame - Audi Variants (Multiple Logo's)

      3D / 4D Number Plate frames! These are an Acrylic frame that your number plate sits in to add a bit of style to your car! Made up of 3 pieces to give a full customised number plate holder! Backing Base Plate Frame Surround Coloured insert with or without logo! Price is for One Frame - if you would like front and rear, please order QTY x2 You choose the following 3 options: The colour of your Insert Which logo you want - If Any The colour of your logo! The frame of the plate is always provided in BLACK. The logo is cut out of the insert - then a second coloured logo of your choise is inserted into the gap to give it a fully smoth and professional finish! How it works? Simply insert your number plate inside the frame using either a gel or foam double sided tape - then attach the frame to your car. These are suitable for front and rear number plates. Due to the nature of acrylic, its difficult to drill without it cracking so the frame needs to be stuck to the vehicle. We do offer a full fitting kit as well which is smaller double sided acrylic rectangles that attach to the back side of the frame and again to the car. Fitment: Please be aware these require a FLAT SURFACE to be adhered to, For the rear which has the beveled recesses for the holes our fitting kit will allow fitment, however, due to their weight and inability to be drilled you will struggle to insert these plates over say a honeycomb or mesh grill. In these instances it may be worth just ordering for the rear!  It is important you fully prepare the area before sticking these in place to prevent loss. If the plate falls off your vehicle and is damaged or lost sadly this is not covered under warranty. If you require any customisation please get in touch via Email or Whatsapp, If we can do this - we will. This may incur additional costs however!

      £25.00

    Close
    Chat with us