Crossover & Hard Pipe
Airtec AIRTEC Motorsport Turbo Elbow Induction Hose for Hyundai i20N (Standard air box)
As part of our expanding Hyundai product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet elbow upgrade for the i20N, suitable for track or fast road use. A direct replacement part that offers increases in performance and response, the enlarged turbo inlet elbow features a freer-flowing design with an increased internal diameter. How it worksThe original elbow begins at 43mm from the turbo inlet and gradually tapers up to just 53mm in diameter as it reaches the induction pipe work. This causes an unnecessary restriction within the intake side that hampers flow and limits throttle response. Our AIRTEC Motorsport direct replacement cast aluminium elbow gently tapers from the turbo inlet out to a huge 76mm diameter, an increase of over 50% compared to the original and an increase of 106% in cross-sectional area. This increased volume and improved design works to reduce restriction and improve flow to the turbo. The kit also comes with a 76mm silicone hose ensuring the diameter is maintained all the way to the air box, and includes all fixtures and fittings, as well as detailed instructions. Finished in powder coated black with a AIRTEC Motorsport cast logo, this uprated elbow upgrade offers a great benefit for modified i20N owners. Features: 50% increase in inlet diameter 106% increase in cross-sectional area Larger, freer-flowing design Improves air flow to the turbo Increases throttle response Direct replacement fitment Made from cast aluminium High-quality powder coat black finish Includes all fixtures and a detailed fitting guide
£199.95
Airtec AIRTEC Motorsport Induction Hose for Suzuki Swift Sport ZC33S
A direct replacement part that gives increases in response and sound by eliminating the internal sound suppressors built into the original induction pipe. Suzuki fit these suppressors to reduce noise and resonation but by replacing the pipe for one without the baffled internals, flow and internal capacity is improved, as well as noise. This increases throttle response and heightens the soundtrack from within the car. The kit includes a machined aluminium connector, a high-quality Pro Hoses silicone hose and the installation package includes all fixtures and fitting instructions. With valuable performance gains and an improved soundtrack, the AIRTEC Motorsport induction hose upgrade is an essential modification. Features:• Designed specifically for the Suzuki Swift• Increases response and sound• Freer-flowing design with suppressor removed • Made from high-quality silicone by Pro Hoses • Direct replacement fitment• Includes all fixtures and fittings• Features detailed fitting guide Registered Design Right number: Application Pending AIRTEC Part No: PH/INDSUZ1
£69.95
Airtec AIRTEC MOTORSPORT RESONATOR DELETE PIPE FOR MINI F56 COOPER S & JCW
A direct replacement part that gives increases in response and sound by eliminating the internal sound resonators built into the original boost pipe from the turbo. The manufacturer fits these resonators to reduce noise and quieten the tone, but by replacing the pipe for one without the baffled internals, flow is improved, as well as noise. This increases throttle response and heightens the soundtrack from within the car. The pipe is made from high-quality aluminium with a machined connector to fit the original fitting and is finished in powder coated black with a laser-cut plaque. The installation package includes all fixtures and fittings, as well as detailed installation instructions. With valuable performance gains and an improved soundtrack, the AIRTEC Motorsport de-res pipe kit is an essential modification. Features: Increases response and sound Improves flow from turbo Direct replacement fitment High quality aluminium construction Powder coat black finish Includes all fixtures and fittings Features detailed fitting guide Fitment: BMW 1 Series – F52 – (10/2015 to 12/2019) BMW 1 Series – F44 Gran Coupé – (10/2018 to 12/2019) BMW 1 Series – F45 Active Tourer – (11/2013 to 04/2018) BMW 1 Series – F45 Active Tourer LCI – (05/2017 to 12/2019) BMW 1 Series – F46 Gran Tourer – (07/2014 to 03/2018) BMW 1 Series – F46 Gran Tourer LCI – (05/2017 to 12/2019) BMW X1 – F48 – (11/2014 to 06/2019) BMW X1 – F48 LCI – (05/2018 to 01/2020) BMW X1 – F49 – (11/2014 to 08/2019) BMW X1 – F49 LCI – (05/2018 to 12/2019) BMW X2 – F39 – (10/2016 to 12/2019) MINI F56 – (04/2013 to 12/2019) MINI F55 – (09/2013 to 12/2019) MINI Clubman F54 – (11/2014 to 07/2019) MINI Clubman F54 LCI – (05/2018 to 12/2019) MINI Cabriolet F57 – (11/2014 to 12/2019) MINI Countryman F60 – (11/2015 to 01/2020) Only in Pro-Series Black, silver for photo purposes only. AIRTEC part no: ATMSMINI15
£169.00
Airtec AIRTEC DE-RES PIPE FOR MK3 FOCUS/M-SPORT TRANSIT CONNECT 1.6 TDCI
A direct replacement part that gives increases in response and sound by eliminating the internal sound resonators built into the original boost pipe from the turbo. The manufacturer fits these resonators to reduce noise and quieten the tone, but by replacing the pipe for one without the baffled internals, flow is improved, as well as noise. This increases throttle response and heightens the soundtrack from within the car. The pipe is made from high-quality aluminium to fit the original fittings and is finished in powder coated black or metal silver. The installation package includes all fixtures and fittings, as well as detailed installation instructions. With valuable performance gains and an improved soundtrack, the AIRTEC Motorsport de-res pipe kit is an essential modification Will fit Ford 1.6 TDCI engines including Focus MK3 1.6 & Transit M Sport Connect. Features: Increases response and sound Improves flow from turbo Direct replacement fitment High quality aluminium construction Powder coat black or metal silver finish Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSFO70
£42.48
Airtec AIRTEC MOTORSPORT ENLARGED TOP HAT FOR ASTRA MK5
AIRTEC Motorsport Astra H enlarged top hat.Designed to work with standard and AIRTEC intercooler kits (Will fit most aftermarket intercooler kits).This bolt on DIY 10 minute job is the perfect upgrade to the Z20LET & Z20LEH 2.0 turbo engines.Features: Improved throttle responseIncreased powerKeeps charge temps down2.5″ aluminium hard pipes for standard throttle body Includes: 90 degree hard pipe, top hat, silicone hose joiners, fitting kit.Will fit Astra MK5 2.0T model – Designed to work with standard and AIRTEC intercooler kit (Will fit most aftermarket intercooler kits) AIRTEC part no: ATMSVAUX1
£115.46
Airtec AIRTEC MOTORSPORT KIA STINGER GT TURBO INTAKE HOSES
As part of our expanding Kia product range, AIRTEC Motorsport are proud to launch our Stinger GT turbo hose kit for track or fast road use. Developed in-house at AIRTEC HQ in the UK, these replace the original intake hoses that go from the air boxes to the turbos. Made from high-quality silicone the improved design offers increased capacity as well as smoother internal flow and can work with either the original air boxes or our AIRTEC Motorsport induction kit. The result is improved throttle response, heightened induction noise and a more pleasing look to the engine bay. Available in black only and complete with jubilee clips, these are direct replacement pipes that require no additional drilling or cutting to fit, and come complete with all the correct fittings, as well as detailed instructions. Features: Comprehensive intake kit designed specially for the Kia Stinger GT platform High-quality Pro Hoses silicone pipework with improved internal flow Fits with either standard air boxes or AIRTEC Motorsport intake kit Improved soundtrack and under bonnet aesthetics Includes all fixtures and fittings AIRTEC Part No: ATMSKIA4
£188.95
RamAir Performance Ramair Aluminium Hard Pipe to fit MK6 Golf Gti 2.0 TSI
This is an aluminium intake pipe is designed to fit Audi, Seat, Skoda & VW with the 2.0 TSI/TFSI EA888 engines. Features 80mm Intake Diameter Will work with standard air box or our induction kit (JSK-123) Improves performance and throttle response Enhanced induction and turbo sound What Does It Do? This performance intake pipe allows for improved air flow and sound over the standard restrictive factory equipment. Paired with our performance induction kit JSK-123 you will see even more positive performance gains. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated aluminium pipe Black silicone coupler If you have any queries on this product fitment then please contact us via 01793 296 344 or on our live chat and one of our brand associates will be more than happy to assist.
£108.97£103.52
Airtec AIRTEC MOTORSPORT YARIS GR REAR TURBO PIPE
As part of our expanding Toyota product range, AIRTEC Motorsport are proud to launch our Yaris GR Rear Turbo Pipe suitable for track or fast road use. Made from high quality silicone, the Pro Hoses pipe maintains a constant internal diameter throughout its length, compared to the original item which narrows and compresses at points causing restrictions to the flow and capacity. Our direct replacement pipe features a simpler, freer flowing design without these performance reducing restrictions. The comprehensive kit includes a billet hose connector and jubilee clips, which makes installation a simple task. Specification: Larger overall capacity and freer-flowing design Improvement in response and sound Direct replacement fitment High quality Pro Hoses silicone pipe Billet aluminium connector Includes jubilee clips Features detailed fitting guide
£115.45
Airtec AIRTEC MOTORSPORT BMW M2C, M3 , M4 J PIPE
As part of our expanding BMW S55 product range, AIRTEC Motorsport are proud to launch our replacement J-pipe for the M2 Competition, M3 and M4 suitable for track or fast road use. In original form, due to the thin plastic construction these pipes are known to split or fracture along the seam or flange even at standard levels of boost, and when pressure is increased with a remap they are even more prone to fail. Our direct replacement uprated pipe is made from high quality aluminium and can withstand any increase in boost pressure and features a CNC-machined billet flange for a perfect fitment. Finished in powder coated black with a laser-etched AIRTEC Motorsport logo, there’s also a port for meth injection and the comprehensive fitting kit includes a Pro Hoses silicone connector, o-ring, spring clip and jubilee clips, as well as detailed installation instructions. Specification: Direct replacement fitment High quality aluminium construction CNC-machined billet flange Meth injection port Long lasting black powder coat finish Laser-etched AIRTEC Motorsport logo Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSBMW8
£149.95
Airtec AIRTEC MOTORSPORT RS-STYLE 76MM TOP INDUCTION PIPE FOR FIESTA ST180
As part of our expanding Fiesta ST180 product range, AIRTEC Motorsport are proud to launch our RS-style 76mm top induction pipe suitable for track or fast road use. Inspired by the design of our Focus RS top induction pipe, we’ve created a large, free flowing pipe that joins the turbo inlet to the intake with a substantial increase in overall internal volume to reduce restriction and improve flow. A direct replacement part for the ST180, it offers increases in performance and response, as well as sound and aesthetics. Made from high quality aluminium for an improved look and feel, the pipe maintains a constant 76mm internal diameter throughout, compared to the 70mm standard item, and features a design with less bends and restrictions. It also features an AIRTEC plaque and is available in a powder-coated black finish for a subtle OEM+ look. The comprehensive package includes Pro Hoses silicone connectors and fixtures and fittings, which makes installation a simple task. There is also the option to add an AIRTEC Motorsport induction kit, featuring an aluminium intake pipe with billet MAF sensor boss, laser cut shield and a choice of a cotton of foam air filter. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification for modified cars. Features: Comprehensive kit designed specially for the ST180 platform Optional induction kit with laser cut shield and cotton or foam filter Improved soundtrack and under bonnet aesthetics Huge improvement to turbo air flow Made from lightweight aluminium Long lasting, high quality black powder coat finish AIRTEC Motorsport plaque Includes all fixtures and fittings AIRTEC Part No: ATMSFO131
£297.63 - £479.89
Airtec AIRTEC MOTORSPORT TOP INDUCTION PIPE FOR FIESTA MK8 ST
A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a smoother design with less bends to hinder airflow and an increase in overall internal volume to reduce restriction and improve flow to the turbo. TECHNICAL DATA As part of our expanding Fiesta ST Mk8 product range, AIRTEC Motorsport are proud to launch our enlarged induction pipe suitable for track or fast road use. A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a smoother design with less bends to hinder airflow and an increase in overall internal volume to reduce restriction and improve flow to the turbo. Made from high quality aluminium for an improved look and feel, the larger pipe also features an AIRTEC plaque and is available in a powder-coated black finish for a subtle OEM+ look. The kit includes a silicone reducer and connects to the standard air box or to an uprated induction kit, such as our AIRTEC Motorsport kit. The comprehensive installation package includes all fixtures and fittings, and detailed instructions. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification. Specification: Suitable for Fiesta Mk8 ST Direct replacement part Improves air flow to the turbo Made from high quality alloy Powder-coated black finish AIRTEC Motorsport plaque Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSFO124
£165.32
Airtec AIRTEC MOTORSPORT LIGHTWEIGHT ALLOY TOP INDUCTION PIPE FOR MK2 FOCUS RS
New easy fit design with the end of the pipes swayed to stop the pipes blowing off on mapped Focus RS’ Features: Direct replacement! No modding required Billet airflow sensor boss Main induction pipe body is high quality alloy and manderal bent – no welds Super light weight design Alloy has better heat deplacement compared to stainless – so colder air enters the turbo Profiled 3mm thick securing brackets Available in polished or stealthy Pro-Series Black Swaged ends to prevent pipes from coming off Replaces that ugly Ford black plastic Induction pipe in a matter of minutes. Fitting takes only 10 minutes, why not add some of our new stainless steel fitting posts to go with your new induction pipe, these can be added on the options list. Picture 4. Stainless fitting posts are not needed to fit your new alloy induction pipe, they just enhance the overall look. Please note: This product will only fit with the uprated Pro Hoses turbo to crossover. Registered Design Right number: 6033439
£182.27 - £261.28
Vag Sport VAGSport Turbo Muffler Delete for 1.8T/2.0T MQB EA888 Gen.3 Engines
VAAGSport Turbo Muffler Delete for 1.8T/2.0T MQB EA888 Gen.3 Engines Volkswagen Mk7 Golf R/GTI, Arteon 4Drive, Audi S3 8V, TTS 8J, SQ2, SEAT Cupra 280/290/300, Skoda Octavia Mk3 VRS (TSI), Cupra Ateca 4Drive Removes the turbulent OEM muffler on the turbocharger. The original muffler essentially acts as a suppressor reducing the turbo sound that tuners and drivers love. The VAAGsport kit has duel seals set into machined grooves so they not only ensure a perfect seal and no boost loss but makes the kit super easy to install. What’s Included Turbo Muffler Delete Comparing stock to VAAGSport
£94.95
Vag Sport VAGSport High Flow Turbo Elbow for 1.8T/2.0T MQB EA888 Gen.3 Engines
VAAGSport High Flow Turbo Elbow for MQB EA888 Gen.3 Engines Volkswagen Mk7 Golf R/GTI, Audi S3 8V, TTS 8J, SEAT Cupra 280/290/300, Skoda Octavia Mk3 VRS (TSI) Elegant design and practical gains. Removing the restriction to the stock IS38/IS20 turbo air flow is paramount, an increased dose of cold air to the turbo gives a extremely worthwhile power gains. Compatible with all 1.8T & 2.0T EA888.3 vehicles, the VAAGSport Turbo Elbow should be one of your first considerations for improving the vehicles air intake system. A great idea on a stock engine, essential on a tuned vehicle. Works even better when combined with the VAAGSport 3” high capacity intake hose and high flow air filter. Suitable for up to Stage 3 tuning (with supporting mods) What’s Included High Flow Turbo Elbow Inlet Note If you are planning to use this item on an Ibiza 1.8TFSI, Polo 1.8TFSI or Audi S1 2.0TFSI – You will need to purchase an additional PCV Breather Pipe.The part number for this is 06K 103 213A and it can be ordered from here. Comparing stock to VAAGSport
£99.95
Airtec AIRTEC MOTORSPORT ENLARGED INDUCTION PIPE FOR HONDA CIVIC FK2 & FK8 TYPE R
AIRTEC Motorsport Enlarged Induction Pipe for Honda Civic FK8 Type R A direct replacement part that offers increases in performance and response as well as sound and aesthetics, the enlarged induction pipe features a 10mm larger inlet, wider outlet and increased overall internal volume to reduce restriction and improve flow to the turbo. AIRTEC part no: ATMSFK803 TECHNICAL DATA AIRTEC Motorsport Enlarged Induction Pipe for Honda Civic FK2 & FK8 Type R. As part of our expanding Honda Civic FK8 Type R product range, AIRTEC Motorsport is proud to launch our enlarged induction pipe suitable for track or fast road use. A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a 10mm larger inlet, wider outlet and increased overall internal volume to reduce restriction and improve flow to the turbo. Made from high quality cast aluminium for a factory look and feel, the larger pipe also features a cast AIRTEC logo in silver and powder-coated black finish for a subtle OEM+ look. The kit includes a silicone reducer to use with a standard air box as well as a straight silicone connector to use with an uprated induction kit, such as our AIRTEC Motorsport kit. The comprehensive installation kit includes all fixtures and fittings and detailed instructions. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification. Dimensions: Civic OEM induction pipe IN: 62mm OUT: 59mm AIRTEC Motorsport induction pipe IN: 72mm OUT: 60mm Specification: Direct replacement part Made from high quality cast alloy AIRTEC cast logo in silver Powder-coated black finish Improves air flow to the turbo Increases mid-range performance Includes all fixtures and fittings Features detailed fitting guide Fits both, FK2 & FK8 Civic Type R. Registered Design Right: 6154867 AIRTEC part no: ATMSFK803
£418.93
Enhanced Performance MK2 Puma ST - Stage 3 Intake Kit - Enhanced Performance
NOW IN STOCK The all new Stage 3 ready Intake kit from our sister company Enhanced Performance is here! Replacing the entire system from the Airbox to the turbo, this kit is designed to maximise power! Improving performance and offering an aggressive intake sound we have ensured that the maximum amount of airflow is delivered as quickly as possible to where its needed! What's in the Kit? 1x Enhanced Performance Crossover Pipe 1x Turbo to Crossover couple silicone 1x Silicone Primary Hose (Blue, Red or black) 1x Enhanced Performance Intake Cage 1x Enhanced Performance Sensor Tube 1x Enhanced Performance Filter (Pro Cotton, Foam or Standard Cotton) 2x Jubilee Clips Technical Info: Each component has been designed to maximise airflow giving a speedy delivery to the turbo, Our free flowing pipe is 25% larger in internal diameter than the oem counterpart, and removes the bend in the middle section which has been known to create turbulence! Overall a wider smoother route for air to pass giving more power!
£350.00 - £370.00
Enhanced Performance MK2 Puma ST - Intake Crossover Pipe - Enhanced Performance
NOW IN STOCK The all new Stage 3 ready Crossover Pipe from our sister company Enhanced Performance is here! Improving performance and offering an aggressive intake sound we have ensured that the maximum amount of airflow is delivered as quickly as possible to where its needed! What's in the Kit? 1x Enhanced Performance Crossover Pipe 1x Turbo to Crossover couple silicone 2x Jubilee Clips Technical Info: Each component has been designed to maximise airflow giving a speedy delivery to the turbo, Our free flowing pipe is 25% larger in internal diameter than the oem counterpart, and removes the bend in the middle section which has been known to create turbulence! Overall a wider smoother route for air to pass giving more power! Will fit with any other brand of silicone / primary hose including RamAir & Pro Alloy
£150.00
Enhanced Performance MK8 Fiesta ST - Intake Crossover Pipe - Enhanced Performance
NOW IN STOCK The all new Stage 3 ready Crossover Pipe from our sister company Enhanced Performance is here! Improving performance and offering an aggressive intake sound we have ensured that the maximum amount of airflow is delivered as quickly as possible to where its needed! What's in the Kit? 1x Enhanced Performance Crossover Pipe 1x Turbo to Crossover couple silicone 2x Jubilee Clips Technical Info: Each component has been designed to maximise airflow giving a speedy delivery to the turbo, Our free flowing pipe is 25% larger in internal diameter than the oem counterpart, and removes the bend in the middle section which has been known to create turbulence! Overall a wider smoother route for air to pass giving more power! Will fit with any other brand of silicone / primary hose including RamAir & Pro Alloy
£150.00
Enhanced Performance MK8 Fiesta ST - Stage 3 Intake Kit - Enhanced Performance
NOW IN STOCK The all new Stage 3 ready Intake kit from our sister company Enhanced Performance is here! Replacing the entire system from the Airbox to the turbo, this kit is designed to maximise power! Improving performance and offering an aggressive intake sound we have ensured that the maximum amount of airflow is delivered as quickly as possible to where its needed! What's in the Kit? 1x Enhanced Performance Crossover Pipe 1x Turbo to Crossover couple silicone 1x Silicone Primary Hose (Blue, Red or black) 1x Enhanced Performance Intake Cage 1x Enhanced Performance Sensor Tube 1x Enhanced Performance Filter (Pro Cotton, Foam or Standard Cotton) 2x Jubilee Clips Technical Info: Each component has been designed to maximise airflow giving a speedy delivery to the turbo, Our free flowing pipe is 25% larger in internal diameter than the oem counterpart, and removes the bend in the middle section which has been known to create turbulence! Overall a wider smoother route for air to pass giving more power!
£350.00 - £370.00
Airtec AIRTEC MOTORSPORT ENLARGED TURBO ELBOW FOR FIESTA ST 180
We’ve developed another solution to our popular enlarged turbo elbow for the Fiesta ST180. This new design features a bespoke one-piece silicone connector to directly replace the original plastic item, or as an alternative to our enlarged alloy design. AIRTEC part number: ATMSFO121 TECHNICAL DATA AIRTEC Motorsport Enlarged Turbo Elbow for Fiesta ST180 in Silicone We’ve developed another solution to our popular enlarged turbo elbow for the Fiesta ST180. This new design features a bespoke one-piece silicone connector to directly replace the original plastic item, or as an alternative to our enlarged alloy design. The internal dimeter of the new Pro Hoses silicone hose measures 70mm from start to finish, offering uninterrupted flow throughout, compared to other enlarged elbow pipes on the market and is a vast improvement over Ford’s restrictive design. This solution also fits in place using a two-piece threaded adapter, which bolts to the flange as usual and then allows the new enlarged inlet pipe to easily tighten into place. This design feature means fitting becomes a much easier and simpler process, and is unlike any other on the market. Features: Direct replacement Enhanced induction noise Improves response and increases performance 70mm continuous internal diameter 10mm larger than original Ford hose Easy fit two-piece threaded adaptor Includes new gasket & fitting kit Fits standard and hybrid turbos Registered Design Right: AIRTEC part number: ATMSFO121
£104.68
Airtec AIRTEC MOTORSPORT TOP INDUCTION PIPE FOR FOCUS ST MK4
As part of our development programme for the latest Mk4 Focus ST model , we’re proud to release our larger top induction pipe upgrade. TECHNICAL DATA AIRTEC Motorsport Top Induction Pipe for Focus ST MK4 As part of our development programme for the latest Mk4 Focus ST model , we’re proud to release our larger top induction pipe upgrade. A direct replacement for the original item, our lightweight, two-piece alloy pipework features a larger internal diameter to help increase air flow passing through. It connects using three high-quality Pro Hoses silicone joiners and comes in a powder coated black finish. A great upgrade for any modified Mk4 ST, the comprehensive kit also includes all fixtures and fittings, including a detailed fitting guide. AIRTEC part no: ATMSFO122
£209.42
Airtec AIRTEC MOTORSPORT LOWER DE-RES PIPE FOR FOCUS MK3 ST-D
AIRTEC Motorsport Lower De-Res Pipe for Focus MK3 ST-D Designed to increase airflow on the Focus MK3 ST-D as a replacement of the restrictive standard boost pipe, the AIRTEC Motorsport boost pipe creates a much smoother air flow by replacing the restrictive bends and smaller diameter pipe. AIRTEC Part No: ATMSFO120 TECHNICAL DATA AIRTEC Motorsport Lower De-Res Pipe for Focus MK3 ST-D Designed to increase airflow on the Focus MK3 ST-D as a replacement of the restrictive standard boost pipe, the AIRTEC Motorsport boost pipe creates a much smoother air flow by replacing the restrictive bends and smaller diameter pipe. Features: Swaged ends to prevent pipes working loose on bigger power cars. Will work perfectly with standard or re-mapped STs. To fit with both, stock and upgraded AIRTEC intercooler. Resonator delete. Fitting takes less than 30 minutes to install and fits to standard boost hoses. 47mm pipe throughout. Available in Pro-Series Black. AIRTEC Part No: ATMSFO120
£122.65
forge Motorsport Forge Motorsport - Inlet Hard Pipe for Audi RS3 8V Facelift (2017+) and TTRS (8S)
The Forge Motorsport high flow intake pipe for the Audi RS3 8V face lift and TTRS 8S, eliminates the highly restrictive plastic inlet pipe by increasing the inlet bore diameter from 70mm to 89mm outer diameter. This increases air flow and maximises the volume of air being forced into the engine, improving efficiency and performance. The FMINLH8 is designed for use with the standard airbox and works superbly with a performance panel filter. This modification can equate to increases of up to 10hp on mapped vehicles which is a remarkable gain for an easy to fit bolt on modification. We recommend also buying our reflective gold heat resistant wrap to aid with keeping the inlet charge temperatures as low as possible. Please see the Gold Wrap here Works flawlessly with the OEM airbox giving improved throttle response and power gains throughout the entire rev range CNC mandrel bent 90mm alloy pipe and brackets welded and manufactured in the UK by experienced fabricators Powder coated in satin black for that OEM factory look Custom silicone couplers for an easy fit The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader Lifetime warranty* Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
£216.59 - £244.12
Airtec AIRTEC MOTORSPORT TURBO ELBOW FOR HYUNDAI I30N (PRE-FACELIFT – 2017 TO 2021)
Designed to replace the restrictive OEM pipe, this 10mm larger silicone elbow and alloy connector offers increased flow. By reducing restriction within the induction system, air flow improves and potential power increases can be released. The elbow is carefully engineered to be a direct replacement item, which ensures a simple installation process and comes with a gloss black Pro Hoses silicone hose, as well as all fixtures and fittings. Please note: fits PRE-FACELIFT (2017 to 2021) Features: 10mm larger internal diameter than stock Improved air flow for increased power CNC machined Simple DIY installation Direct replacement Enhanced sound Pro Hoses silicone connector Registered Design Right number: 6093143 AIRTEC part no: ATIKHYU2
£148.79