Enhanced Edition Vehicle Lighting

Enhanced Edition Footwell Light Upgrade – Ford Puma MK2 (2019+) | 12-SMD LED Replacement Unit Get ready to transform your cabin lighting with CEUK’s Enhanced Edition Footwell Light Unit, now available as a complete plug-and-play replacement for the Ford Puma MK2 (2019+). Developed in-house by our Enhanced Edition team, this is a true upgrade from Ford’s dim, underpowered OEM unit. We’ve taken the stock light’s 1 weak SMD LED and replaced it with 12 ultra-bright SMD chips, delivering a staggering improvement in brightness and clarity. 💡 What’s New? 12x SMD LEDs vs OEM 1x – huge increase in output Crystal Clear Lens – unlike Ford’s frosted housing which dulls brightness Optimised Light Spread – fills the footwell area evenly, without glare Available in 4 Colours – match or enhance your interior lighting (Note: Green & Orange not available in OEM-style unit) Direct Replacement – plug-and-play fitting with OEM connectors Designed & Built in the UK – exclusive CEUK innovation 🛠️ When Does It Light Up? When you open the door When you switch off the engine after a drive When your engine is on – providing ambient light while driving When your headlights are on – integrates with factory ambient lighting ✅ Vehicle Compatibility: Ford Puma MK2 (2019–present) – all models, including ST Most lower-spec models already have the wiring in place, even if no lights are fitted. Check under the footwell trim for a socket often clipped behind the steering column. 📦 What’s Included: 2x Enhanced Edition Footwell LED Unit (12-SMD, Clear Housing) Pre-assembled, ready to plug in CEUK 12-Month Warranty as standard (longer if stated on packaging) ⚠️ Please note: Green and Orange LEDs are not available in the OEM-style housing at this time. 🎥 Watch the Launch Video See the difference for yourself and experience what it means to be #Enhanced

Read more less

Enhanced Edition Footwell Light Unit – Ford Fiesta MK8 (2017–2024) | 12-SMD Plug & Play Replacement Bring your cabin to life with the CEUK Enhanced Edition Footwell Light Upgrade, now available as a complete direct-replacement unit for the Ford Fiesta MK8. Designed and built in the UK, this pioneering product redefines what footwell lighting should be. We’ve replaced the dull, single-chip OEM unit with a powerful 12-SMD LED board, delivering up to 12x more brightness, improved clarity, and an eye-catching glow that transforms your interior. 💡 What’s Upgraded? 12x SMD LEDs vs Ford’s basic 1-chip board Crystal-clear housing for uncompromised light output OEM-style fitment – no modification required 4 colour options available (Note: Green & Orange not available in OEM-style housing) Designed to disperse light evenly without glare while driving 🔌 When Do the Lights Work? When opening the doors When switching off the engine after driving When driving with headlights on When ambient lighting is active – integrates with factory light settings ✅ Confirmed Fitment: Ford Fiesta MK8 (2017–Present) – all trims including ST All MK8 models are pre-wired from factory – even if no footwell lights are installed Wiring is typically hidden in a hole under the footwell area, clipped behind the trim near the steering column. 📦 What’s Included: 2x Enhanced Edition Footwell Light Unit (Clear housing, 12-SMD LED) Plug-and-play connection 12-Month CEUK Warranty (or longer if stated on packaging – packaging must be retained) ⚠️ Important Note: Green and Orange LED colours are not currently available in the OEM-style housing. This is a replacement unit, not a clip-on or overlay. 🎥 Watch the Launch Video See the light in action and join thousands of Ford owners who have already been #Enhanced

Read more less

Enhanced Edition Footwell Lighting Upgrade – MK2 Puma Add a touch of brilliance to your interior with our Enhanced Edition Footwell Lighting Upgrade—engineered specifically for the MK2 Ford Puma. Designed to boost visibility and ambience, this is the ultimate plug-and-play lighting solution. ⚙️ What’s Included? We now offer two variants to suit your preferred finish: 🔧 Version 1 – Flexible 12SMD Panel Slimline design with foam adhesive backing Plug-and-play fitment using factory wiring Mount anywhere under the footwell Available in 6 vibrant colours 🧩 Version 2 – OEM Style Unit Complete OEM-style housing Upgraded with a powerful 12SMD LED chipboard Simple factory fit for a clean, professional finish Available in 4 colours ⚠️ Green and Orange currently unavailable for this version 🚗 When Do They Illuminate? Your footwell lights will activate when: 🚪 You open the vehicle doors 🅿️ The engine is switched off 🚘 The engine is on (ambient driving light mode) These mimic the OEM ambient lighting functionality, adding both style and practicality to your ride. 🔌 Compatibility & Installation ✅ Confirmed Fitment: All MK2 Puma models (including ST & lower-spec variants) All MK2 Pumas have pre-installed footwell wiring—usually found inside the hole under the footwell, clipped behind the steering panel. Installation takes minutes with no coding or complex wiring needed. 📦 What’s in the Box? 2x Footwell Lighting Units (V1 or V2 based on selection) 🛡️ Warranty: ✅ 12-Month CEUK WarrantyFor extended warranty claims, original product packaging must be retained.

Read more less

🌈 Chaser Edition Bluetooth Footwell Strip Kit – MK3 Focus (All Models) Take your interior lighting to the next level with the CEUK Chaser Edition Footwell Kit! Designed specifically for the MK3 Focus (including ST & RS), this kit adds dynamic, colour-changing lighting that responds to your mood and motion — all controlled directly from your smartphone. 📱 Key Features: 💡 Over 600 Static Colours 🎶 200+ Dynamic Light Modes – Includes “fluid” and “dancing” effects 📲 Bluetooth App Control – Change modes, brightness, colours & more 🔌 Ignition-Linked Power – Lights up when you start your car 🧠 Memory Function – Remembers your last setting 🔧 Installation: Powered via passenger footwell fuse box (mini blade fuse) Designed to fit MK3 Focus models and any vehicle using mini blade fuses Comes with everything you need – plug & play style setup 📦 What’s in the Box: 1x Flexible LED Footwell Strip 1x CEUK Wiring Loom 1x Bluetooth Control Module 1x Installation Guide 🧤 Note: Glove box strip not included – shown in reference images for alternate fitments. 🚘 Vehicle Fitment: ✅ Ford Focus MK3 (2011–2018) ✅ Compatible with ST, ST-Line & RS variants ⚠️ Please verify your fuse type if fitting to another vehicle. 🛡️ Warranty: 12-month warranty included as standard. For extended warranty periods (if stated), please retain your product packaging.

Read more less

Chaser Edition Bluetooth Footwell Strip Kit – Universal Fit Bring your car's interior to life with the Chaser Edition LED Footwell Kit from CEUK — now available as a universal fit for any vehicle! Whether you're building ambience or making a statement, this kit gives your cabin an instant upgrade. 💡 Features: 🌈 600+ Static Colours 🎭 200+ Fluid/Dynamic Modes – Colour-changing, fading, dancing and more! 📲 Bluetooth App Controlled – Fully configurable from your smartphone 🔌 Ignition Powered – Lights turn on with your engine 🧠 Remembers Last Setting – Set it and forget it! 🔧 Installation Made Easy: Simply tell us your fuse type (Mini, Micro, Standard Blade etc.) in the order notes — we’ll do the rest!The kit plugs into your passenger footwell fuse box for power. Installation takes minutes. 📦 What’s in the Box? 1x Flexible Footwell LED Strip 1x Wiring Loom 1x Bluetooth Control Module 1x Instruction Sheet 🚫 Glove box strip not included. Catalogue images may show multiple model variants for reference only. 🚘 Vehicle Compatibility: ✅ Universal fitment – works on any 12v vehicle✅ Compatible with any car that has footwell fuse access❗ Just provide your fuse type when ordering to ensure the correct fit 🛡️ Warranty: Includes a 12-month guarantee as standard. If your packaging mentions a longer period, please keep it to validate extended coverage.

Read more less

Chaser Edition Bluetooth Footwell Strip Kit – For MK8 Fiesta (All Models) Ready to level up your cabin vibes? The Chaser Edition LED Footwell Kit from CEUK is the ultimate ambient lighting upgrade — designed specifically for the MK8 Fiesta (All Models) and vehicles using Micro Blade Fuses. ✨ Key Features: 🌈 600+ Static Colours for personalisation 💫 200+ Dynamic Modes – flowing, pulsing, flashing effects 📲 Fully Bluetooth Controlled via dedicated mobile app 🔌 Ignition Linked – lights turn on and off with your vehicle 💾 Memory Function – remembers your last setting 🧰 What’s in the Box: 1x High-output LED Footwell Strip 1x CEUK Wiring Loom (Micro Blade Fuse Compatible) 1x Bluetooth Control Module 1x Instruction Manual This kit uses the passenger-side fuse box for a clean, hidden installation. 🚘 Fitment Information: ✅ Specifically tailored for Ford Fiesta MK8 (2017-Present) ✅ Compatible with all trims, including ST & ST-Line ✅ Also fits any vehicle with Micro Blade fuses (please confirm fitment if unsure) 🔍 Glovebox strip not included – this is sold separately. ⚠️ Note on LED Compatibility: Some vehicles may throw harmless dashboard error messages due to lower draw of LED units. If this occurs, consult our FAQs for resolution steps. 🛡️ Warranty: Includes a 12-month CEUK warranty as standard. For extended warranty support, please retain the product packaging if it states more than 12 months.

Read more less

🌈 Chaser Edition Bluetooth Footwell Strip Kit – MK4 Focus (All Models) Ready to take your interior ambient lighting to the next level?Introducing the Chaser Edition Footwell Strip Kit – an immersive lighting upgrade controlled entirely via Bluetooth, designed for the MK4 Ford Focus and any vehicle with Micro Blade fuses. 🎨 Over 600 Static Colours & 200 Dynamic Modes With a wide spectrum of colour options and over 200 animated "chase" effects, you can truly personalise your cabin environment like never before. All features are controlled straight from your smartphone using our intuitive app. 🔌 Plug & Glow Simplicity Powered by your vehicle’s ignition fuse, the lights automatically turn on and off with the engine – no buttons or switches needed! 📦 What’s in the Box? 1x RGB Footwell Strip 1x Custom Wiring Loom 1x Bluetooth Control Module 1x Instruction Guide (Glove box strip not included – shown for demo purposes only) ⚙️ Quick & Easy Installation Fits into the passenger footwell fuse box. Designed for quick DIY fitting with no cutting or splicing. Uses Micro Blade fuse taps for clean power integration. 🚘 Vehicle Fitment: Ford Focus MK4 & MK4.5 (All Models) Any other vehicle using Micro Blade fuses ⚠️ If you're unsure about fitment, contact us before purchase. Some vehicle trims may differ in lighting layouts. 🛡️ Warranty Information: This product includes a 12-month warranty as standard. If your packaging states a longer warranty, please retain it for future claims.

Read more less

CEUK #Enhanced Illuminated Door Sill Protectors – Ford Performance Edition Add a premium touch to your vehicle’s entryway with our #Enhanced Illuminated Door Sill Protectors, designed exclusively for Ford Performance enthusiasts. With a sleek black brushed stainless steel finish and crisp white illumination, these sills combine form and function for the perfect first impression. ✨ Key Features: 🖤 Black Brushed Stainless Steel – Improved durability and premium aesthetic 💡 Illuminated 'Ford Performance' Logo – Crisp white & Red glow when doors open 🔋 Wireless V2 Version – Easy installation, no wiring needed 📐 Size: 47cm (L) x 5cm (W) x 1cm (H) – Perfect fit for most Ford door sills 🔧 Plug & Play Setup – No cutting or wiring required 📦 What’s in the Box? 2x Illuminated Door Sill Protectors (Wireless V2) 2x CR2032 Batteries 1x Fitting Kit (Adhesive + Instructions) 🛡️ Warranty: Comes with a 12-month CEUK guarantee(If longer warranty is shown on packaging, retain it for future claims) 💬 Why Choose CEUK?We’re dedicated to delivering products that truly #Enhance your vehicle, and this upgrade does exactly that – combining aesthetics, simplicity, and functionality in one bold step. 🚘 Style your entry. Light up your mod game. Go #Enhanced.

Read more less

Chaser Edition Bluetooth RGB Glove Box Strip Kit – For MK7 Fiesta (Pre-Facelift & Facelift) You loved the original glove box LED strip. You upgraded to the RGB Bluetooth edition. Now it's time for the ultimate evolution in ambient interior lighting – the CEUK Chaser Edition. This all-new lighting strip delivers a visually dynamic experience with over 144 solid colour options and 200+ fluid, chasing, and dancing modes – fully customizable from your smartphone via Bluetooth. Designed exclusively for the MK7 / MK7.5 Fiesta (pre-facelift & facelift), the strip activates automatically with your ignition and turns off when you power down – effortless style, every time you drive. 🚘 Key Features: 🎆 144+ Static Colours – Customize the vibe to your mood 🔄 200+ Chaser/Dynamic Modes – Flowing, pulsing, and dancing colour patterns 📱 Bluetooth Controlled – Full control from your smartphone using the included app 💡 Ignition-Powered – Lights activate with your car’s ignition 🌧️ Waterproof Coated – Improved strip durability and reliability ⚡ Plug & Play Install – DIY-friendly with full fitting kit included 📦 What’s in the Box? 1x Chaser Edition RGB Glove Box Strip (for MK7 Fiesta only) 1x Fitting Kit 1x Installation Instructions 🚨 Important Fitment Notes: Fits only MK7 Fiesta models – Pre-facelift and facelift May not suit models with different glovebox configurations (e.g. ST special editions – please verify before purchase) LED installation may trigger harmless dashboard error messages in some vehicles – see FAQ for guidance 🛡️ Warranty: Backed by a 12-month CEUK warranty(Keep product packaging if longer warranty is specified there) 💬 Interior lighting, reimagined. Make your Fiesta truly #Enhanced.

Read more less

#Enhanced Edition Footwell Light Upgrade – For MK8 / MK8.5 FiestaGive your interior a serious lighting upgrade with our ridiculously bright 12SMD Footwell Light Kit, purpose-built for the Ford Fiesta MK8 & MK8.5. Every MK8 Fiesta—yes, even base models—has the hidden wiring ready for footwell lighting. Simply locate the hole beneath your dashboard (driver & passenger side); the wiring is typically tucked behind the trim, ready to plug in. With up to 12x the brightness of OEM (which has just 1 SMD), this mod doesn't just illuminate—it transforms your cabin with ambient light in 6 vivid colour options (V1) and 4 OEM-matched shades (V2). ✨ How it Works: Your footwell lights activate in 3 key scenarios: 🚪 When you open your car doors 🛑 When you switch off the engine 🚗 While driving (mimics ambient lighting if headlights are on) 🆚 Choose Your Style: Version 1 – Aftermarket Look– 12SMD LED Panel with foam backing– Stick it wherever you like– Available in 6 colours: Red, White, Blue, Purple, Green, Orange Version 2 – OEM Style– Direct-fit replacement for factory unit– Pre-fitted with high-power LED chip board– Available in 4 colours: Red, White, Blue, Purple🚫 Note: Green & Orange not available in OEM unit 📦 What’s in the Box: 2x Footwell LED Light Units (V1 or V2 based on selection) Fitting instructions Foam adhesive (V1 only) 🔧 Quick Facts: ⚡ 12SMD Output – OEM has only 1SMD ✅ Plug-and-play – No coding or wiring required 🔋 Low power consumption 💪 CEUK Engineered & Tested 🎨 Multiple colours to match your vibe 🛡️ Warranty: Backed by our 12-month warranty. If the packaging states a longer term, please retain it for extended cover. 🧠 Pro Tip: Combine with CEUK ambient interior lighting upgrades for full #Enhanced interior transformation! Upgrade. Enhance. Illuminate.Have you been #Enhanced? 🔧✨

Read more less

Why have one colour when you can have them all? Introducing the CEUK Enhanced Edition RGB Glove Box & Footwell Lighting Kit – the ultimate plug & play ambient lighting upgrade. This stylish, Bluetooth-controlled kit allows you to select from 144+ solid colours and multiple dynamic modes to completely transform your car's interior vibe. Whether you're looking for a subtle glow or a vibrant light show, this upgrade has you covered. 🎯 Key Features: RGB LED Lighting: Choose from over 144 static colours Dynamic Modes: Colour chasing, fading, flashing & music-reactive modes Bluetooth App Control: Control lighting with your smartphone Ultra-Bright 5050 LED Strip Tech Plug & Play Installation: No cutting, splicing, or soldering required Fully Reversible 📦 What’s in the Box? 1x Bluetooth Receiver 1x Plug & Play Power Wiring Loom 1–3x RGB LED Strips (based on your kit selection) 1x Fitting Kit 1x Instruction Manual Available in three options: Glovebox only, Footwell only, or Full Combo Kit. 🛠️ Installation: Designed for simplicity, this kit installs in under 10 minutes using CEUK's proven plug & play technology. No tools, no fuss – just plug it in, stick the LEDs where you want them, and you're done. Control everything from your phone via our user-friendly app. Perfect for adding a subtle enhancement or going full show mode! 🛡️ Warranty: Includes a 12-month standard warranty. If the product packaging indicates a longer period, you must retain the packaging for warranty purposes. 🚗 Vehicle Fitment: Compatible with most modern vehicles.Note: Vehicle variants (such as Ford ST/GTi models) may have different setups. Please confirm bulb fitment or reach out before purchase.

Read more less

Tired of struggling to see in your boot? We’ve got your fix. If you’ve ever been frustrated by the pathetically dim single boot light in your car, you’re not alone. That's why we developed the CEUK Enhanced Boot Light Upgrade Kit – a simple plug-and-play solution that massively increases visibility in your vehicle's boot space. 💡 Key Features: Dual-panel SMD LED upgrade Plug & Play: Zero hard wiring or splicing Fits both 501 and Festoon boot light sockets Easy 5-minute installation Choice of 6 vibrant colours OEM-style connectors for a factory look 🧰 What’s In the Box? 1x 501 Adapter 1x Festoon Adapter 2x High-power SMD LED Panels (Choose your colour) 1x Custom Extension Wiring Loom 1x Instruction Manual 🔧 Fitting & Compatibility: Fits any vehicle with a 501 or Festoon boot light socket – including hatchbacks, estates, and SUVs.Simply remove your existing boot bulb, plug in the adapter and panel(s), and mount in desired locations using the pre-fitted adhesive backing. No cutting, soldering, or guesswork – fully reversible and DIY-friendly. Tools needed: Just a small flat-head screwdriver. 🛡️ Warranty: Wiring Loom: Lifetime Guarantee LED Panels: 12-Month WarrantyRetain original packaging if extended warranty is stated. 🚗 Vehicle Fitment: This kit is designed to be universal, but some vehicles (e.g. Ford ST, VW GTi) may have non-standard boot fittings.If unsure, check your socket type or reach out before ordering. Note: LED installation may trigger a harmless dashboard warning in some cars. See our FAQ for more info.

Read more less

Enhanced Edition Glove Box LED Strip Light – Add Ambience to Your Fiesta Transform the interior of your MK7 / 7.5 Fiesta with our Enhanced Edition Glove Box Strip Light, designed to either replace your factory strip or add the feature entirely to models that lack it. Whether you're going for a subtle glow or a bold colour change, this upgrade gives your interior a fresh, premium touch. The LED strip activates with your vehicle ignition, providing ambient lighting during your drive and while the car is in use. No cutting or splicing required – this is a true plug-and-play kit designed for a fast, clean install in under 10 minutes. 🔧 Key Features: Direct OEM-style fit for MK7 Fiesta Plug-and-play with no modifications Ultra bright LED strip in your choice of colour Powers on with ignition – ambient lighting on the go Built-in 3M adhesive for secure, clean install Easy DIY fitting with full instructions 📦 What’s in the Box? 1x Enhanced Edition LED Strip with integrated 3M backing (your colour choice) 1x Plug-and-Play wiring loom 1x Alcohol cleaning wipe 1x Installation Manual 🛠️ Fitting Requirements: Basic tools required: 10mm socket & driver/ratchetInstallation time: Approx. 10 minutesNo electrical experience necessary, but basic car knowledge is helpful. 🛡️ Warranty: 12-month standard warranty. If the product packaging states a longer duration, please retain it to claim the extended warranty.

Read more less

#Enhanced Illuminated Sill Protectors – RS Spec Edition Add a premium touch to your vehicle’s entry with the Enhanced Illuminated Sill Protectors – RS Spec, now featuring our upgraded black brushed stainless steel finish for superior durability and a sleek look. This kit combines stunning ultra-bright blue LED illumination with enhanced interior lighting to transform the look and feel of your car's interior – all while protecting your sills from wear and tear. 🔴 Please Note:The Red variant is being discontinued – remaining stock features the older 3-line design. All non-discontinued stock now features the new 2-line stainless steel design for improved aesthetics and quality. 💡 What’s Included in the Kit? 2x Illuminated Door Sill Protectors (RS Spec Design – Blue LED) 2x BriteVue™ 36SMD Footwell Light Panels (same colour as sill protector) 2x Dual-output Wiring Looms (Footwell + Kick Plate adapters) 🔌 Simple Plug & Play Installation No cutting or splicing required! Simply: Unplug your existing footwell bulb or LED. Plug in our CEUK splitter loom. Peel and stick the adhesive backing on both sill protector and footwell panel. Secure in place – done in under 3 minutes per side. 📐 Dimensions: Length: 54cm Depth: 5cm Height: 1cm 🔧 Why Choose CEUK? We design and engineer our #Enhanced products with quality, durability, and user-friendliness in mind. With genuine plug-and-play setups and premium materials, we aim to #Enhance your vehicle without compromise. 🛡️ Warranty Information 12-month standard warranty included. For extended warranty coverage, retain product packaging if stated.

Read more less

Enhanced Edition Footwell Lighting Kit for Transit Custom Add subtle style and visibility to your Transit Custom with our #Enhanced Edition Footwell Light Kit – designed specifically for the modern van owner. With ultra-bright 36SMD panels in a choice of six vibrant colours, this ambient upgrade delivers both functionality and flair. Whether you’re tackling early morning deliveries or long-distance drives, this plug-and-play kit provides a soft cabin glow to help you stay alert and comfortable. 🔌 How It Works: The kit connects directly to an ignition-live fuse using a piggyback fuse connector. Lights turn on with the ignition and switch off when the van is off. No cutting, no splicing, and fully reversible—the easiest DIY mod you’ll do. 📦 What’s in the Kit: 1x Plug-and-Play Wiring Loom (Transit Custom specific) 1x Inline Fuse 2x 36SMD Ultra Bright Footwell Light Panels Full Step-by-Step Instructions with Pictures 🔒 Safety First: Fully fused and surge protected No risk to your vehicle’s electrical system Instructions included to support confident installation in under 5 minutes 🚐 Perfect for: Transit Custom owners looking for a clean, functional upgrade Anyone wanting a touch of ambient lighting in their work van Drivers needing a better-lit footwell for late-night and early-morning journeys 🛡️ Warranty Information The product includes a 12-month warranty as standard. If the packaging states a longer warranty period, it must be retained as proof for any extended coverage.

Read more less

Enhanced Permanent Footwell Light Kit – Universal Fit “Your footwell lights are so bright—but I want them on while I drive!”We heard you loud and clear. Introducing the Enhanced Permanent Footwell Kit—designed for all vehicles, regardless of whether you already have OEM footwell lights. 💡 Why You’ll Love It: Ultra-bright 12SMD LED panels deliver vibrant ambient lighting while you drive Fully independent system—OEM lights remain unaffected Plug & Play installation in under 10 minutes No OEM footwell lights? No problem! This kit works on any vehicle 🔌 How It Works: The kit uses a piggyback fuse system to draw power from an ignition-live fuse. When the engine starts, the LEDs turn on. Turn off the car, and the lights shut off automatically—no switches or splicing needed. 📦 What’s in the Kit: 1x Plug-and-Play Wiring Loom 1x 3A Fuse 1x Fuse Holder (or all 3 options, if selected) 2x 12SMD Footwell LED Panels (in your chosen colour) Installation instructions with clear step-by-step photos 🔐 Built for Safety: Fully fused and surge protected CEUK in-house quality control Safe for use on all vehicle electrical systems 🎨 Available Colours: Choose from a range of bold and vivid colours to match your style or existing interior mods. 🛡️ Warranty Information: This kit includes a 12-month warranty as standard. For any extended warranty mentioned on packaging, retain it for validation. ⚠️ Vehicle Compatibility: Universal fit. However, some special edition vehicles (e.g., Ford ST, VW GTI) may have unique light units. Always check fitment or contact us before ordering.Installation of aftermarket LEDs may trigger harmless dashboard alerts—please consult our FAQ if needed.

Read more less

Enhanced Rear Footwell Add-On Kit – For Existing CEUK 36SMD Users Only ⚠️ IMPORTANT: PLEASE READ BEFORE ORDERING!This kit is for rear footwell lighting only and is intended only for customers who already have our 36SMD front footwell upgrade. If you purchased standard footwell bulbs and not the 36SMD panels, this kit is not compatible. 🔥 Upgrade Your Rear Footwells Take your vehicle interior to the next level with ultra-bright rear footwell panels. This add-on behaves exactly like your OEM footwells—only brighter and more vibrant. Simply plug into your existing setup with our vehicle-specific rear wiring loom and adapter (if required). Available in 6 bold colour options to match or complement your current front footwell lights. 📦 What’s in the Box? 2x Ultra Bright Rear Footwell LED Panels (your chosen colour) 1x Vehicle-Specific Rear Wiring Loom 1x Vehicle-Specific Adapter (if applicable) ⚙️ Fitment Requirements Your vehicle must already have OEM footwells installed You must already be using CEUK 36SMD Front Panels Not compatible with basic LED bulb upgrades If your vehicle is not listed, please contact us to confirm compatibility 🛠️ Why Choose CEUK? 100% Plug & Play – No splicing or soldering Fully fused and surge protected Brighter than OEM lighting Custom-fit for your exact make & model 🛡️ Warranty Info Includes 12-month warranty as standard. For extended warranties stated on packaging, you must retain the original packaging as proof. ⚠️ Compatibility Note Some models (e.g., Ford ST, VW GTI) may have different wiring setups. Always confirm fitment before purchase. LED upgrades may trigger harmless dashboard error messages in some vehicles. See our FAQ for more info.

Read more less

Enhanced Edition Front & Rear Footwell Lighting Kit Transform your interior with CEUK's Enhanced Footwell Lighting Kit, designed to upgrade both front and rear footwells for a brighter, more modern look. Using ultra-bright SMD LED panels, this kit replaces your OEM footwell lighting with a vivid and customisable alternative – available in 6 striking colours. Whether you're adding ambience or simply improving night-time visibility, this upgrade is a must-have for enthusiasts looking to #Enhance their ride. Please note: This kit is designed for vehicles that already have OEM footwell lighting. 🔧 Key Features Brighter than OEM – Ultra-bright LED panels Plug & Play – Vehicle-specific looms for easy install Behaves exactly like OEM footwell lights (ignition & door trigger) Choose from White, Blue, Red, Green, Amber, or Purple Seamless front and rear interior illumination 📦 What’s in the Box? 4x Ultra Bright LED Footwell Panels 1x Front & Rear Vehicle-Specific Wiring Loom 1x Footwell Adapter (if applicable) ⚙️ Compatibility Notes Vehicle must already have front footwell lighting installed Not all models are listed – contact us if unsure which kit suits your vehicle Installation may differ depending on model/year/trim 🛡️ Warranty This kit is covered by a 12-month standard warranty. If extended coverage is stated on the packaging, retain packaging as proof for future claims. ⚠️ Additional Info Some vehicles (e.g., Ford ST/ VW GTi) may have different interior wiring configurations. Please double-check compatibility before ordering. Installation of LED products may trigger a dash warning – a harmless and temporary side effect of reduced power usage. Please refer to our FAQ for guidance.

Read more less

#Enhanced Wireless Illuminated Sill Protectors – ST Spec (Red) Add the wow factor every time you open your door with the #Enhanced Illuminated Sill Protectors from CEUK – now in a stunning red glow and fully wireless, making them suitable for any vehicle! Crafted in premium black brushed stainless steel for a sleek, durable finish, this ST-Spec edition combines function, style, and simplicity. Whether you're attending a show or just want to enjoy that premium feel every time you enter your vehicle, this is the ultimate finishing touch. 🧰 What’s in the Box? 2x Wireless Illuminated Sill Protectors (ST Design, Red LED) Fitting Kit (includes magnetic sensors and adhesive pads) ⚙️ How It Works: Installation takes minutes. Just stick the sill protectors in place using the supplied adhesive and position the magnetic sensor. When the door opens and the sensor is triggered, the sill protector lights up for 30 seconds, or until the door closes — whichever comes first. 📏 Dimensions: Length: 47 cm Depth: 5 cm Height: 1 cm Power: Wireless / Battery Operated 💡 Why Choose CEUK? We’re dedicated to delivering only the best products to help you #Enhance your vehicle. These sills are a stylish and simple upgrade that turn heads and elevate your car’s aesthetic instantly. 🛡️ Warranty: 12-Month Warranty as standard For extended warranty (if applicable), please retain the original product packaging.

Read more less