Exhaust Systems

Requires mandatory ECU reflash (PPF models only). Fitment to PPF equipped models is for motorsport and off road use only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M240i performance exhaust is made in 3"/76.2mm pipework and fits from the catalytic converter section to before the rear box replacing the whole centre section. This exhaust makes the system louder as it removes the standard resonator or PPF filter on later models and therefore, offers a significantly sportier exhaust note. All relevant fittings and gaskets are supplied for fitment and to revert back to the standard exhaust. Fitment to later M240i models which have the PPF filter as standard will require basic engine tuning at time of fitment to cancel the EML light. Fitment to PPF-equipped models is for motorsport and off road use only as it removes the PPF Filter. Please Note: Does not fit cabriolet models. Press Release With its potent, 335bhp turbocharged engine and an engaging chassis, the latest BMW M240i delivers a thrilling driving experience, all wrapped up in a stylish and solidly built package. However, there's always room for a little improvement. As with all new models, the M240i is fitted with a PPF (petrol particulate filter), which limits the potential of that fantastic 3.0-litre straight six engine, leading to a muted and slightly disappointing sound. Cobra Sport's engineers have developed a solution in the form of their new PPF Delete. This high-quality, 3in (76.2mm) mandrel-bent pipe features TIG-welded hangers and removes a significant restriction in the exhaust system. The main brief was to improve the sound and unleash the full potential of that straight-six engine. Following intensive development, Cobra Sport have delivered a product that truly awakens the sound of the M240i, while also improving gas flow. The exhaust now emits a deep and vibrant tone, especially evident under load, while under deceleration, there's now an audible burble, accompanied by pops and bangs. This simple, but effective upgrade completely changes the character of the car, giving it a more sporty and thrilling sound with a 7.5% dB increase. A direct replacement for the OEM part, the Cobra Sport PPF Delete is the most cost-effective way to improve the sound of the stock M240i. A simple ECU reflash will be required at the time of fitting to prevent engine warning lights illuminating. A Centre Resonator Delete Pipe is also available for earlier, pre-PPF M240is, which delivers similar improvements, but without the need for an ECU reflash. Like all Cobra Sport exhausts, this product utilises precision TIG-welding techniques for exemplary fit and finish - a feature that sets Cobra Sport apart from other manufacturers. Media Example of BMW M140i PPF Delete Sports Exhaust - Sound Comparison Example of BMW M140i PPF Delete Fitment - Hampshire Photography VLOG Exhaust Talk 03 - GPF Debate - What is a GPF / PPF Exhaust Particulate Filter - Improve Exhaust Sound

Read more less

Fits: B47 Engine - F30 (Saloon), F31 (Touring) M-Sport models - includes quad exit rear panel. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 320D performance exhaust is made in 2.5"/70mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 320D Saloon and Touring vehicles with the M-Sport bodykit with the addition of the supplied interchangeable quad exit M3 Style lower rear panel. All relevant fittings and gaskets are supplied (quad exit panel included).  Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Fits B47 LCI models only - does not fit AdBlue models

Read more less

Fits: B47 engined F32 (Coupe), F33 (Convertible) and F36 (Gran Coupe) (incl LCI) M-Sport models - rear panel included. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 420D performance exhaust is made in 2.5"/63.5mm pipework and fits from the centre section backwards replacing the standard rear section with quad exit tailpipes. This performance exhaust is designed to fit 420D vehicles with the M-Sport bodykit with the addition of the supplied interchangeable quad exit M4 Style lower rear panel. This cosmetic performance exhaust upgrade is focused on improving the styling of the 420D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied (quad exit rear panel included). Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle.  This product fits models equipped with factory fit tow bar.  Does not fit AdBlue models Press Release The latest hot new product to drop from Sheffield-based exhaust specialists, Cobra Sport, is this high-quality, cosmetic, quad tailpipe system for the popular BMW 420d M-Sport Coupe, Cabriolet and Gran Coupe. Manufactured from high-quality T304 stainless steel, this centre and rear section exhaust upgrade features 2.5in (63.5mm) mandrel-bent pipework with aggressive slash-cut quad tailpipes. Designed as a direct replacement for the OEM system, it fits both Coupe and Cabriolet M-Sport models, once the mandatory aftermarket replacement rear valance has been fitted. This M4-inspired conversion would make the perfect addition to any 420d M-Sport, especially remapped examples, which are capable of impressive power and torque gains. Like all Cobra Sport exhausts, this system utilises precision TIG-welding techniques for exemplary fit and finish - a feature that sets Cobra Sport apart from other manufacturers. With over 25 years in the performance exhaust industry, each Cobra Sport exhaust system is designed, manufactured and tested in Sheffield, the heart of the UK steel industry. Cobra Sport utilise TIG-welding techniques to ensure a flawless finish and quality that you can rely on. Media

Read more less

Fits both PPF and earlier pre-PPF models - requires mandatory ECU reflash when fitted to PPF models. Fitment to PPF equipped models is for motorsport and off road use only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M140i performance exhaust is made in 3inch/76.2mm pipework and fits from the catalytic converter section to before the rear box replacing the whole centre section. This exhaust makes the system louder as it removes the standard resonator or PPF filter on later models and both resonators on earlier models and therefore, offers a significantly sportier exhaust note. All relevant fittings and gaskets are supplied for fitment and to revert back to the standard exhaust. Fitment to later M140i models which have the PPF filter as standard will require basic engine tuning at time of fitment to cancel the EML light. Fitment is for motorsport and off road use only as it removes the PPF filter.  Press Release With its potent, 335bhp turbocharged engine and an engaging chassis, the latest BMW M140i delivers a thrilling driving experience, all wrapped up in a stylish and solidly built package. However, there's always room for a little improvement. As with all new models, the M140i is fitted with a PPF (petrol particulate filter), which limits the potential of that fantastic 3.0-litre straight six engine, leading to a muted and slightly disappointing sound. Cobra Sport's engineers have developed a solution in the form of their new PPF Delete. This high-quality, 3in (76.2mm) mandrel-bent pipe features TIG-welded hangers and removes a significant restriction in the exhaust system. The main brief was to improve the sound and unleash the full potential of that straight-six engine. Following intensive development, Cobra Sport have delivered a product that truly awakens the sound of the M140i, while also improving gas flow. The exhaust now emits a deep and vibrant tone, especially evident under load, while under deceleration, there's now an audible burble, accompanied by pops and bangs. This simple, but effective upgrade completely changes the character of the car, giving it a more sporty and thrilling sound with a 7.5% dB increase. A direct replacement for the OEM part, the Cobra Sport PPF Delete is the most cost-effective way to improve the sound of the stock M140i. A simple ECU reflash will be required at the time of fitting to prevent engine warning lights illuminating. A Centre Resonator Delete Pipe is also available for earlier, pre-PPF M140is, which delivers similar improvements, but without the need for an ECU reflash. Like all Cobra Sport exhausts, this product utilises precision TIG-welding techniques for exemplary fit and finish - a feature that sets Cobra Sport apart from other manufacturers. Media Example of BMW M140i PPF Delete Sports Exhaust - Sound Comparison Example of BMW M140i PPF Delete Fitment - Hampshire Photography VLOG Exhaust Talk 03 - GPF Debate - What is a GPF / PPF Exhaust Particulate Filter - Improve Exhaust Sound

Read more less

Fits: F30 / F30 LCI (Saloon) & F31 / F31 LCI (Touring / Estate) M-Sport models (additional quad exit panel required). Save 30% on the matching rear diffuser panel when purchased together (see part code: RP01). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 330D performance exhaust is made in 3"/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 330D Saloon and Touring vehicles with the M-Sport bodykit with the addition of the interchangeable quad exit M3 Style lower rear panel. Please see related products for the matching rear diffuser panel - save 30% on the panel (part code: RP01)when purchased with this exhaust (retail customers only). This cosmetic performance exhaust upgrade is focused on improving the styling of the 330D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. This product fits models equipped with factory fit tow bar.  Does not fit AdBlue models. Press Release Cobra Sport have added a quad exit performance exhaust to their ever popular range of style upgrades for the BMW 330D, with the launch of a BMW M3 style quad exit exhaust system. For those seeking to achieve a more aggressive and sporty look similar to that of the M3 to the rear of their 330D, Cobra Sport now offer a quad tip fully TIG welded stainless steel cosmetic exhaust upgrade which makes a bold statement. This exhaust system has been designed to fit the F30 Saloon and F31 Touring 330D models with the M-Sport bodykit with the addition of a quad exit M3 style lower rear panel (available separately). Once fitted, the new Cobra Sport 330D exhaust system and replacement body panel look entirely at home on the car giving a look which should have been created directly from the factory. The new Cobra Sport exhaust is ideal for those looking for a sportier more aggressive look to the high powered diesel models. Matt Thomas, Cobra Sport's Sales Manager says "We've seen a growing trend of people wanting to achieve the look of the more recognisable M4 quad exit exhaust on the more economical diesel 330D. Our quad exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. The 330D cosmetic exhaust upgrade has been specially designed to offer a marginally deeper exhaust tone overall but stay within 2dB of the original exhaust." The new quad exit Cobra Sport exhaust for the330D is finished with a pair of specially designed twin 3” (76.2mm) highly polished T304 stainless steel slash cut tailpipes which further enhance the appearance the car and take inspiration from the styling of the popular BMW M3. Media Sound example of the closely related BMW 435D Exhaust (Quad Exit Rear Exhaust)

Read more less

Fits: F32 (Coupe), F33 (Convertible) & F36 (Gran Coupe) M-Sport models (additional quad exit panel required). Save 30% on the matching rear diffuser panel when purchased together (see part code: RP03). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 430D performance exhaust is made in 3"/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 430D vehicles with the M-Sport bodykit with the addition of the interchangeable quad exit M4 Style lower rear panel. Please see related products for the matching rear diffuser panel - save 30% on the panel (part code: RP03) when purchased with this exhaust (retail customers only). This cosmetic performance exhaust upgrade is focused on improving the styling of the 330D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Does not fit AdBlue models. Press Release Cobra Sport have added a quad exit performance exhaust to their ever popular range of style upgrades for the BMW 430D, with the launch of a BMW M4 style quad exit exhaust system. For those seeking to achieve a more aggressive and sporty look similar to that of the M4 to the rear of their 430D, Cobra Sport now offer a quad tip fully TIG welded stainless steel cosmetic exhaust upgrade which makes a bold statement. This exhaust system has been designed to fit F32 Coupe, F33 Convertible and F36 Gran Coupe 430D models with the M-Sport bodykit with the addition of a quad exit M4 style lower rear panel (available separately). Once fitted, the new Cobra Sport 430D exhaust system and replacement body panel look entirely at home on the car giving a look which should have been created directly from the factory. The new Cobra Sport exhaust is ideal for those looking for a sportier more aggressive look to the high powered diesel models. Matt Thomas, Cobra Sport’s Sales Manager says “We’ve seen a growing trend of people wanting to achieve the look of the more recognisable M4 quad exit exhaust on the more economical diesel 430D. Our quad exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. The 330D dual exit cosmetic exhaust upgrade has been specially designed to offer a slightly deeper exhaust tone overall but stays within 2dB of the original exhaust." The new quad exit Cobra Sport exhaust for the 430D is finished with a pair of specially designed twin 3” (76.2mm) highly polished T304 stainless steel slash cut tailpipes which further enhance the appearance the car and take inspiration from the styling of the popular BMW M4. Media Example of the closely related BMW 435D Exhaust (Quad Exit Rear Exhaust)  

Read more less

Fits: F30 (Saloon) and F31 (Touring / Estate) M-Sport models (additional quad exit panel required). Save 30% on the matching rear diffuser panel when purchased together (see part code: RP01). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 335D performance exhaust is made in 3"/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 335D Saloon and Touring vehicles with the M-Sport bodykit with the addition of the interchangeable quad exit M3 Style lower rear panel. Please see related products for the matching rear diffuser panel - save 30% on the panel (part code: RP01) when purchased with this exhaust (retail customers only). This cosmetic performance exhaust upgrade is focused on improving the styling of the 335D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. This product fits models equipped with factory fit tow bar.  Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Does not fit AdBlue models. Press Release Cobra Sport have added a quad exit performance exhaust to their ever popular range of style upgrades for the BMW 335D, with the launch of a BMW M3 inspired quad exit exhaust system. For those seeking to achieve a more aggressive and sporty look similar to that of the M4 to the rear of their 335D, Cobra Sport now offer a quad tip fully TIG welded stainless steel cosmetic exhaust upgrade which makes a bold statement. This exhaust system has been designed to fit the F30 Saloon and F31 Touring models with the M-Sport bodykit with the addition of a quad exit M4 style lower rear panel (available separately). Once fitted, the new Cobra Sport 335D exhaust system and replacement body panel look entirely at home on the car giving a look which should have been created directly from the factory. The new Cobra Sport exhaust is ideal for those looking for a sportier more aggressive look to the high powered diesel models. Matt Thomas, Cobra Sport’s Sales Manager says “We’ve seen a growing trend of people wanting to achieve the look of the more recognisable M4 quad exit exhaust on the more economical diesel 335D. Our quad exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. The 335D cosmetic exhaust upgrade has been specially designed to offer a marginally deeper exhaust tone overall but stay within 2dB of the original exhaust." The new quad exit Cobra Sport exhaust for the 335D is finished with a pair of specially designed twin 3” (76.2mm) highly polished T304 stainless steel slash cut tailpipes which further enhance the appearance the car and take inspiration from the styling of the popular BMW M3. Media Sound example of the closely related BMW 435D Exhaust (Quad Exit Rear Exhaust)

Read more less

Fits: F32 (Coupe), F33 (Convertible) & F36 (Gran Coupe) M-Sport models (additional quad exit panel required). Save 30% on the matching rear diffuser panel when purchased together (see part code: RP03). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 435D performance exhaust is made in 3"/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 435D vehicles with the M-Sport bodykit with the addition of the interchangeable quad exit M4 Style lower rear panel. Please see related products for the matching rear diffuser panel - save 30% on the panel (part code: RP03) when purchased with this exhaust (retail customers only). This cosmetic performance exhaust upgrade is focused on improving the styling of the 435D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Does not fit AdBlue models. Press Release Cobra Sport have added a quad exit performance exhaust to their ever popular range of style upgrades for the BMW 435D, with the launch of a BMW M4 style quad exit exhaust system. For those seeking to achieve a more aggressive and sporty look similar to that of the M4 to the rear of their 435D, Cobra Sport now offer a quad tip fully TIG welded stainless steel cosmetic exhaust upgrade which makes a bold statement. This exhaust system has been designed to fit F32 Coupe, F33 Convertible and F36 Gran Coupe 435D models with the M-Sport bodykit with the addition of a quad exit M4 style lower rear panel (available separately). Once fitted, the new Cobra Sport 435D exhaust system and replacement body panel look entirely at home on the car giving a look which should have been created directly from the factory. The new Cobra Sport exhaust is ideal for those looking for a sportier more aggressive look to the high powered diesel models. Matt Thomas, Cobra Sport's Sales Manager says "We've seen a growing trend of people wanting to achieve the look of the more recognisable M4 quad exit exhaust on the more economical diesel 435D. Our quad exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. The 435D cosmetic exhaust upgrade has been specially designed to offer a marginally deeper exhaust tone overall but stay within 2dB of the original exhaust." The new quad exit Cobra Sport exhaust for the 435D is finished with a pair of specially designed twin 3" (76.2mm) highly polished T304 stainless steel slash cut tailpipes which further enhance the appearance the car and take inspiration from the styling of the popular BMW M4. Media

Read more less

Fits to Primary O/E Catalyst - Pre-PPF models only. (Requires 2 x BMW gasket - part number 18307851168 - not included). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M4 (F82) Coupe performance exhaust is made in 3"/76.2mm pipework and fits from the primary catalytic converter section backwards. This exhaust replace the secondary catalyst (Cat Bypass), centre and rear sections. This exhaust includes the secondary de-cat and is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks. EML lights may activate after removing the standard second O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. This primary cat back exhaust includes a H-pipe section to combine and equalise the gas flow giving a sportier exhaust note. Please Note - This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Sport+ mode) your exhaust tone will continue to swop from quieter to louder tones as before. Requires 2 x BMW gasket - part number 18307851168 - all other relevant gaskets and fittings are supplied. Press Release Keen to make a step above and differentiate from the competition, Cobra Sport have used their extensive experience and use of new exhaust technology to create a product which truly stands out in the aftermarket performance market. The Cobra Sport research and development team quickly made the decision to base the new M4 exhaust systems on 3" (76.2mm) T304 grade stainless steel pipework. The larger diameter 3" pipework enhances the capabilities of the 3.0 litre twin turbo V6 engine and utilising advanced gas flow design, allows for substantial performance improvements. The M4 development has been based around a valved cat back exhaust with the addition of a secondary de-cat (catalyst bypass) exhaust upgrade. The cat back exhaust includes a centre H-Pipe section, designed to mix and perfectly balance gas flow from both sides of the engine to increase power, improve flow efficiency and enhance the exhaust tone. Extensive road testing was undertaken in order to ensure there was no resonance or exhaust drone in the cabin throughout the rev range in all drive modes. The sound of the new Cobra Sport exhaust boast vastly improved tonal characteristics, with the new exhaust offering a deeper more aggressive sound when under full load. The Cobra Sport exhaust incorporates a pair of exhaust valves designed to utilise the existing valve motors , enabling continued use of the M4 drive modes to adjust the dynamic of the exhaust. In the comfort driving mode the valves remain shut forcing the gas flow through the flow optimised rear box, creating a finely tuned exhaust note for a sporty but unobtrusive sound track for everyday use. With the valves open in Sport and Sport+ mode, the gas flows through all 4 tips creating a highly aggressive sound track. Cobra Sport Sales Manager Matt Thomas commented, "Building on an existing first class reputation in the BMW tuning market, we're excited to be adding the Cobra Sport sound and performance upgrade to the stunning M4. Power testing the secondary de-cat and cat back system revealed an impressive +21.25bhp and +9.2lb-ft of torque. The free flowing 3” pipework and optimised exhaust technology opens up huge potential for M4 owners looking to increase power whilst also obtaining a pitch perfect exhaust tone." Cobra Sport have improved the styling of the BMW M4, creating a noticeably enhanced and balanced look to the rear of the M4 with a choice of quad 3.5" (88.9mm) inward rolled baffled or inverted highly polished stainless steel tailpipes. For those looking to take the style upgrade a stage further, upgraded ceramic coated matt black 'Blackout' tailpipes are available. Media Example of the BMW M4 Performance Exhaust (Valved Primary Cat Back Exhaust). Interior Sound Example of the BMW M4 Performance Exhaust (Valved Primary Cat Back Exhaust). Fitting Video - BMW M4 Performance Exhaust (Valved Primary Cat Back Exhaust). Rolling Road Power Testing - BMW M4 Performance Exhaust (Valved Primary Cat Back Exhaust). Example of the BMW M4 Performance Exhaust (Valved Secondary Cat Back Exhaust).

Read more less

Fits to O/E Exhaust and Cobra Sport Secondary De-Cat Pipes. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M4 (F82) Coupe performance exhaust is made in 3"/76.2mm pipework and fit from the second catalytic converter section backwards (Cat-back) this exhausts replace the centre and rear sections. This secondary cat back exhaust includes a centre H-pipe section to combine and equalise the gas flow giving a sportier exhaust note. Please Note - This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Normal to Sport+ mode) your exhaust tone will continue to swop from quieter to louder tones as before. All relevant fittings and gaskets are supplied. Press Release Keen to make a step above and differentiate from the competition, Cobra Sport have used their extensive experience and use of new exhaust technology to create a product which truly stands out in the aftermarket performance market. The Cobra Sport research and development team quickly made the decision to base the new M4 exhaust systems on 3" (76.2mm) T304 grade stainless steel pipework. The larger diameter 3" pipework enhances the capabilities of the 3.0 litre twin turbo V6 engine and utilising advanced gas flow design, allows for substantial performance improvements. The M4 development has been based around a valved cat back exhaust with the addition of a secondary de-cat (catalyst bypass) exhaust upgrade. The cat back exhaust includes a centre H-Pipe section, designed to mix and perfectly balance gas flow from both sides of the engine to increase power, improve flow efficiency and enhance the exhaust tone. Extensive road testing was undertaken in order to ensure there was no resonance or exhaust drone in the cabin throughout the rev range in all drive modes. The sound of the new Cobra Sport exhaust boast vastly improved tonal characteristics, with the new exhaust offering a deeper more aggressive sound when under full load. The Cobra Sport exhaust incorporates a pair of exhaust valves designed to utilise the existing valve motors , enabling continued use of the M4 drive modes to adjust the dynamic of the exhaust. In the comfort driving mode the valves remain shut forcing the gas flow through the flow optimised rear box, creating a finely tuned exhaust note for a sporty but unobtrusive sound track for everyday use. With the valves open in Sport and Sport+ mode, the gas flows through all 4 tips creating a highly aggressive sound track. Cobra Sport Sales Manager Matt Thomas commented, “Building on an existing first class reputation in the BMW tuning market, we're excited to be adding the Cobra Sport sound and performance upgrade to the stunning M4. Power testing the secondary de-cat and cat back system revealed an impressive +21.25bhp and +9.2lb-ft of torque. The free flowing 3” pipework and optimised exhaust technology opens up huge potential for M4 owners looking to increase power whilst also obtaining a pitch perfect exhaust tone". Cobra Sport have improved the styling of the BMW M4, creating a noticeably enhanced and balanced look to the rear of the M4 with a choice of quad 3.5" (88.9mm) inward rolled baffled or inverted highly polished stainless steel tailpipes. For those looking to take the style upgrade a stage further, upgraded ceramic coated matt black 'Blackout' tailpipes are available. Media Example of the BMW M4 Performance Exhaust (Valved Secondary Cat Back Exhaust). Example of the BMW M4 Performance Exhaust (Valved Secondary Cat Back Exhaust). Interior Sound Example of the BMW M4 Performance Exhaust (Valved Primary Cat Back Exhaust). BMW M4 Performance Exhaust Power Testing (Valved Primary Cat Back Exhaust). Fitting Video - BMW M4 Performance Exhaust (Valved Primary Cat Back Exhaust). Rolling Road Power Testing - BMW M4 Performance Exhaust (Valved Primary Cat Back Exhaust).

Read more less

Fits to Cobra Sport Valved Cat Back only (BM103) - Pre-PPF models only. (Requires 2 x BMW gasket - part number 18307851168 - not included). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M4 performance exhaust is made in 3"/76.2mm bore pipework and replaces the secondary catalyst (Cat Bypass). The de-cat exhaust version is sold for motorsport and off road use only worldwide. EML lights may activate after removing the standard second O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. Requires 2 x BMW gasket - part number 18307851168 - all other relevant gaskets and fittings are supplied. Press Release Keen to make a step above and differentiate from the competition, Cobra Sport have used their extensive experience and use of new exhaust technology to create a product which truly stands out in the aftermarket performance market. The Cobra Sport research and development team quickly made the decision to base the new M4 exhaust systems on 3" (76.2mm) T304 grade stainless steel pipework. The larger diameter 3" pipework enhances the capabilities of the 3.0 litre twin turbo V6 engine and utilising advanced gas flow design, allows for substantial performance improvements. The M4 development has been based around a valved cat back exhaust with the addition of a secondary de-cat (catalyst bypass) exhaust upgrade. The cat back exhaust includes a centre H-Pipe section, designed to mix and perfectly balance gas flow from both sides of the engine to increase power, improve flow efficiency and enhance the exhaust tone. Extensive road testing was undertaken in order to ensure there was no resonance or exhaust drone in the cabin throughout the rev range in all drive modes. The sound of the new Cobra Sport exhaust boast vastly improved tonal characteristics, with the new exhaust offering a deeper more aggressive sound when under full load. The Cobra Sport exhaust incorporates a pair of exhaust valves designed to utilise the existing valve motors , enabling continued use of the M4 drive modes to adjust the dynamic of the exhaust. In the comfort driving mode the valves remain shut forcing the gas flow through the flow optimised rear box, creating a finely tuned exhaust note for a sporty but unobtrusive sound track for everyday use. With the valves open in Sport and Sport+ mode, the gas flows through all 4 tips creating a highly aggressive sound track. Cobra Sport Sales Manager Matt Thomas commented, “Building on an existing first class reputation in the BMW tuning market, we're excited to be adding the Cobra Sport sound and performance upgrade to the stunning M4. Power testing the secondary de-cat and cat back system revealed an impressive +21.25bhp and +9.2lb-ft of torque. The free flowing 3" pipework and optimised exhaust technology opens up huge potential for M4 owners looking to increase power whilst also obtaining a pitch perfect exhaust tone". Cobra Sport have improved the styling of the BMW M4, creating a noticeably enhanced and balanced look to the rear of the M4 with a choice of quad 3.5" (88.9mm) inward rolled baffled or inverted highly polished stainless steel tailpipes. For those looking to take the style upgrade a stage further, upgraded ceramic coated matt black 'Blackout' tailpipes are available.

Read more less

Please note: does not fit M2 Competition model. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M2 (F87) Coupe performance exhaust is made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back) this exhaust replaces the centre and rear sections. Please Note - This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Normal to Sport+ mode) your exhaust tone will continue to swop from quieter to louder tones as before. All relevant fittings and gaskets are supplied. Press Release Delivering an even harder performance edge to BMW's brilliant F87 M2 is the new valved 3" (76.2mm) Cobra Sport performance exhaust. Both Cobra Sport's Technical and Research and Development teams were involved in the planning and preparation that went into the product testing and development of this new exhaust system to ensure the correct balance between sound, aesthetics and power improvements. The new Cobra Sport Exhausts for the M2 are based on 3" (76.2mm) diameter pipework for improved gas flow and to open up opportunities for performance tuning. The T304 stainless steel pipework is CNC mandrel bent and benefits from advanced manufacturing techniques and superior TIG welding procedures to produce a superlative finish. By including the exhaust valve, the new Cobra Sport performance exhaust systems offer the best of both worlds continuing to utilise the built in BMW drive modes. With the valve closed the gasses are directed through the entirety of the optimised rear silencer ensuring a subtle but sporty exhaust tone suitable for everyday driving. In sport mode the valve opens allowing gasses to flow through and exit both outlets of the silencer increasing flow rates and sound levels. The result in sport mode is a much deeper exhaust tone than standard which becomes highly aggressive when under full load with a trademark crackle on overrun, completely overhauling the driving experience. The design of the back box was tweaked a number of times to ensure there was no resonance or exhaust drone with each layout being extensively road tested to find the optimal design. During the same process the exhaust sound was optimised with the final system adding a subtle +4dB on the track test whilst completely overhauling the tone upgrading the car to a truly stunning sound track. Cobra Sport Sales Manager Matt Thomas commented, "The BMW M2 is a real enthusiasts car so we were keen to create a system which suits everyday and full track use. By incorporating the valve, we have been able to cater for both however having heard the exhaust in Sport+ mode that's the mode we expect it to stay in permanently! Matched with the Cobra Sport Sports Catalyst or De-Cat downpipe to create a full turbo back exhaust upgrade, huge power increases are possible with a re-map at one of our tuning partners." The Cobra Sport's quad exit exhaust system benefits from a choice of twin slash cut and angled 88.9mm tailpipes finished in either original highly polished stainless steel or upgraded to our Carbon Fibre tailpipe option. Media Example of the BMW M2 Performance Exhausts (Valved Cat Back Exhaust).

Read more less

Fits: M-Sport models only (additional dual exit panel required). This Does not fit AdBlue models, or models with rare additional strengthening beams or mounting point (please see final product image for reference). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 330D performance exhaust is made in 3"/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 2015 onwards 330D (F30 LCI Saloon) vehicles with the M-Sport bodykit with the addition of the interchangeable dual exit 340i M-Sport lower rear panel which is available directly from the related items section (Part No - RP02). This cosmetic performance exhaust upgrade is focused on improving the styling of the 330D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. This product fits models equipped with factory fit tow bar.  Does not fit AdBlue models, or models with rare additional strengthening beams or mounting point (please see final product image for reference). Does not fit AdBlue models. Press Release For those seeking to achieve the more aggressive and sporty look of the 340i to the rear end of their 330D, Cobra Sport now offer a dual exit cosmetic exhaust upgrade which makes a bold statement. This exhaust system has been designed to fit neatly with the M-Sport rear bumper into which the 340i M-Sport dual exit lower rear panel (available separately) easily clips into place completely replacing the existing single side exit 330D lower rear panel. Once fitted, the new Cobra Sport 330D exhaust system and replacement 440i lower rear body panel look entirely at home on the car and gives the 330D a much sportier edge with the dual exit exhaust tailpipes. Matt Thomas, Cobra Sport’s Sales Manager says “We’ve seen a growing trend of people wanting to achieve the look of the more recognisable 340i’s dual exit exhaust on the more economical diesel model, our dual exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. The 330D dual exit cosmetic exhaust upgrade has been specially designed to offer a slightly deeper exhaust tone overall but stays within 2dB of the original exhaust." The new dual exit exhaust for the 330D is finished with a choice of round 3.5” (88.9mm) highly polished T304 stainless steel tailpipes which further enhance the appearance the car and perfectly match the styling of the popular BMW M-Sport models. Media Sound example of the closely related BMW 335D Exhaust (Dual Exit Rear Exhaust) Sound example of the closely related BMW 435D Exhaust (Quad Exit Rear Exhaust)

Read more less

Fits Audi RS3 (8V) Sportsback (2015-17) with the engine Code CZGB (2.5 TFSI Quattro) Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi RS3 performance exhaust is made in stainless steel pipework and replaces the primary catalyst (Cat Bypass). This de-cat exhaust is sold for motorsport and off road use only worldwide. All relevant fittings and gaskets are supplied (Except turbo gasket). Media British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the turbo backwards (Turbo back system) these exhausts replace the front pipe, standard catalyst, centre and rear sections. This resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option, as it excludes the centre silencer and therefore, has a sportier exhaust note. The de-cat exhaust version is sold for motorsport and off road use only worldwide.  The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied. (Except turbo clamp). Note - The fitted images only show the resonated cat-back system. This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before. Note: This product fits Non-GPF models only, please see alternative listings for GPF Models. Press Release With a potent 2.0 TFSI engine and sure-footed quattro all-wheel drive, the latest generation of Audi S3 is a premium package. For those looking to awaken the sound and unlock the performance of their vehicle, Cobra Sport has the solution. Precision TIG-welded from T304 stainless steel, this new valved system has been specially developed to integrate with the Audi Drive modes. The valves open or close depending on the mode selected - so you can keep sound levels in check or unleash the full potential of the engine. With valves open, the sound is amplified to deliver a thrilling, aggressive note (+13dB in Dynamic Mode with non resonated cat back) but without any unwanted drone. The gear change on S-tronic models is also enhanced with a more sporty tone. Available as a resonated and non-resonated (louder) cat back setup, this 3 inch system is the perfect accompaniment to any S3 (8V). For those looking to go further, Cobra Sport sports cat/de-cat front pipes may be specified to create a full turbo-back system. With a remap, considerable power gains are achievable. A range of 3.5in (90mm) tailpipes options are available, including highly polished inverted tips, Ceramic-coated Blackout tips (optional extra) and the latest Carbon Fibre tips (optional extra), which would provide the finishing touch to any S3. Like all Cobra Sport exhausts, this system utilises precision TIG-welding techniques for exemplary fit and finish, a feature that sets Cobra Sport apart from other manufacturers. Media Audi S3 (8V) Valved Cat Back Exhausts Showcase - (3 Door - Non Resonated Cat Back) Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.   

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated sports exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option, as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before. Note: This product fits Non-GPF models only, please see alternative listings for GPF Models. Press Release With a potent 2.0 TFSI engine and sure-footed quattro all-wheel drive, the latest generation of Audi S3 is a premium package. For those looking to awaken the sound and unlock the performance of their vehicle, Cobra Sport has the solution. Precision TIG-welded from T304 stainless steel, this new valved system has been specially developed to integrate with the Audi Drive modes. The valves open or close depending on the mode selected - so you can keep sound levels in check or unleash the full potential of the engine. With valves open, the sound is amplified to deliver a thrilling, aggressive note (+13dB in Dynamic Mode with non resonated cat back) but without any unwanted drone. The gear change on S-tronic models is also enhanced with a more sporty tone. Available as a resonated and non-resonated (louder) cat back setup, this 3 inch system is the perfect accompaniment to any S3 (8V). For those looking to go further, Cobra Sport sports cat/de-cat front pipes may be specified to create a full turbo-back system. With a remap, considerable power gains are achievable. A range of 3.5in (90mm) tailpipes options are available, including highly polished inverted tips, Ceramic-coated Blackout tips (optional extra) and the latest Carbon Fibre tips (optional extra), which would provide the finishing touch to any S3. Like all Cobra Sport exhausts, this system utilises precision TIG-welding techniques for exemplary fit and finish - a feature that sets Cobra Sport apart from other manufacturers. Media Audi S3 (8V) Valved Cat Back Exhausts Showcase - (3 Door - Non Resonated Cat Back) Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.    

Read more less

Note: This product fits Non-GPF models only Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the turbo backwards (Turbo back system) these exhausts replace the front pipe, standard catalyst, centre and rear sections. The resonated sports exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option, as it excludes the centre silencer and therefore, has a sportier exhaust note. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied. (Except turbo clamp). Note - The fitted images only show the resonated cat-back system. This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before. Press Release With a potent 2.0 TFSI engine and sure-footed quattro all-wheel drive, the latest generation of Audi S3 is a premium package. For those looking to awaken the sound and unlock the performance of their vehicle, Cobra Sport has the solution. Precision TIG-welded from T304 stainless steel, this new valved system has been specially developed to integrate with the Audi Drive modes. The valves open or close depending on the mode selected - so you can keep sound levels in check or unleash the full potential of the engine. With valves open, the sound is amplified to deliver a thrilling, aggressive note (+13dB in Dynamic Mode with non resonated cat back) but without any unwanted drone. The gear change on S-tronic models is also enhanced with a more sporty tone. Available as a resonated and non-resonated (louder) cat back setup, this 3 inch system is the perfect accompaniment to any S3 (8V). For those looking to go further, Cobra Sport sports cat/de-cat front pipes may be specified to create a full turbo-back system. With a remap, considerable power gains are achievable. A range of 3.5in (90mm) tailpipes options are available, including highly polished inverted tips, Ceramic-coated Blackout tips (optional extra) and the latest Carbon Fibre tips (optional extra), which would provide the finishing touch to any S3. Like all Cobra Sport exhausts, this system utilises precision TIG-welding techniques for exemplary fit and finish - a feature that sets Cobra Sport apart from other manufacturers. Media Audi S3 (8V) Valved Cat Back Exhausts Showcase - (3 Door - Non Resonated Cat Back) Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.    

Read more less

Note: This product fits Non-GPF models only, please see alternative listings for GPF Models. This Cobra Sport Audi S3 Saloon Quattro performance exhaust enhances the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated sports exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied. This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before. Press Release With a potent 2.0 TFSI engine and sure-footed quattro all-wheel drive, the latest generation of Audi S3 is a premium package. For those looking to awaken the sound and unlock the performance of their vehicle, Cobra Sport has the solution. Precision TIG-welded from T304 stainless steel, this new valved system has been specially developed to integrate with the Audi Drive modes. The valves open or close depending on the mode selected, so you can keep sound levels in check or unleash the full potential of the engine. With valves open, the sound is amplified to deliver a thrilling, aggressive note (+13dB in Dynamic Mode with non resonated cat back) but without any unwanted drone. The gear change on S-tronic models is also enhanced with a more sporty tone. Available as a resonated and non-resonated (louder) cat back setup, this 3 inch system is the perfect accompaniment to any S3 (8V). For those looking to go further, Cobra Sport sports cat/de-cat front pipes may be specified to create a full turbo-back system. With a remap, considerable power gains are achievable. A range of 3.5in (90mm) tailpipes options are available, including highly polished inverted tips, Ceramic-coated Blackout tips (optional extra) and the latest Carbon Fibre tips (optional extra), which would provide the finishing touch to any S3. Like all Cobra Sport exhausts, this system utilises precision TIG-welding techniques for exemplary fit and finish - a feature that sets Cobra Sport apart from other manufacturers. Media Audi S3 (8V) Valved Cat Back Exhausts Showcase - (3 Door - Non Resonated Cat Back) Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.    

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the turbo backwards (Turbo back system) these exhausts replace the front pipe, standard catalyst, centre and rear sections. The resonated sports exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied. (Except turbo clamp). Note - The fitted images show the resonated cat-back system. This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before. Note: This product fits Non-GPF models only, please see alternative listings for GPF models. Press Release With a potent 2.0 TFSI engine and sure-footed quattro all-wheel drive, the latest generation of Audi S3 is a premium package. For those looking to awaken the sound and unlock the performance of their vehicle, Cobra Sport has the solution. Precision TIG-welded from T304 stainless steel, this new valved system has been specially developed to integrate with the Audi Drive modes. The valves open or close depending on the mode selected - so you can keep sound levels in check or unleash the full potential of the engine. With valves open, the sound is amplified to deliver a thrilling, aggressive note (+13dB in Dynamic Mode with non resonated cat back) but without any unwanted drone. The gear change on S-tronic models is also enhanced with a more sporty tone. Available as a resonated and non-resonated (louder) cat back setup, this 3 inch system is the perfect accompaniment to any S3 (8V). For those looking to go further, Cobra Sport sports cat/de-cat front pipes may be specified to create a full turbo-back system. With a remap, considerable power gains are achievable. A range of 3.5in (90mm) tailpipes options are available, including highly polished inverted tips, Ceramic-coated Blackout tips (optional extra) and the latest Carbon Fibre tips (optional extra), which would provide the finishing touch to any S3. Like all Cobra Sport exhausts, this system utilises precision TIG-welding techniques for exemplary fit and finish - a feature that sets Cobra Sport apart from other manufacturers. Media Audi S3 (8V) Valved Cat Back Exhausts Showcase - (3 Door - Non Resonated Cat Back) Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.    

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated sports exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option, as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Please note: Fitted images show the resonated version. This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before. Note: This product fits Non-GPF models only, please see alternative listings for GPF models. Press Release With a potent 2.0 TFSI engine and sure-footed quattro all-wheel drive, the latest generation of Audi S3 is a premium package. For those looking to awaken the sound and unlock the performance of their vehicle, Cobra Sport has the solution. Precision TIG-welded from T304 stainless steel, this new valved system has been specially developed to integrate with the Audi Drive modes. The valves open or close depending on the mode selected - so you can keep sound levels in check or unleash the full potential of the engine. With valves open, the sound is amplified to deliver a thrilling, aggressive note (+13dB in Dynamic Mode with non resonated cat back) but without any unwanted drone. The gear change on S-tronic models is also enhanced with a more sporty tone. Available as a resonated and non-resonated (louder) cat back setup, this 3 inch system is the perfect accompaniment to any S3 (8V). For those looking to go further, Cobra Sport sports cat/de-cat front pipes may be specified to create a full turbo-back system. With a remap, considerable power gains are achievable. A range of 3.5in (90mm) tailpipes options are available, including highly polished inverted tips, Ceramic-coated Blackout tips (optional extra) and the latest Carbon Fibre tips (optional extra), which would provide the finishing touch to any S3. Like all Cobra Sport exhausts, this system utilises precision TIG-welding techniques for exemplary fit and finish - a feature that sets Cobra Sport apart from other manufacturers. Media Audi S3 (8V) Valved Cat Back Exhausts Showcase - (3 Door - Non Resonated Cat Back) Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.    

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience.  This Audi A1 1.4 TFSI performance exhaust is made in 2.5" / 63.5mm pipework and fits from the front pipe / catalyst backwards (Cat-back system) these exhausts replace the front box, centre and rear sections. The non-resonated sports exhaust makes the system louder as it excludes the centre silencer and therefore, has a sportier exhaust note. This exhaust is also available as a resonated version (including centre silencer) which is a quieter option and has a subtle but sporty tone.  All relevant fittings and gaskets are supplied. Media Example of Audi A1 1.4 TFSI sports exhaust (cat back - non-resonated). Cobra Sport Exhausts Audi / VW promotional video.  British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.  

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi TTRS performance exhaust is made in 2.5"/63.5mm bore pipework and replaces the secondary catalyst (Cat Bypass). The de-cat exhaust version is sold for motorsport and off road use only worldwide. All relevant fittings and gaskets are supplied. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. Media Example of the Audi RS3 (8V) / TT RS (Mk3) Performance Exhausts (Secondary Catalyst Delete Pipes).

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi RS3 performance exhaust is made in 2.5"/63.5mm bore pipework and replaces the secondary catalyst (Cat Bypass). This de-cat exhaust is sold for motorsport and off road use only worldwide. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. All relevant fittings and gaskets are supplied. Media Example of the Audi RS3 8V Performance Exhausts (Secondary Catalyst Delete Pipes).

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the turbo backwards (Turbo back system) these exhausts replace the front pipe, standard catalyst, centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option, as it excludes the centre silencer and therefore, has a sportier exhaust note. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied. (Except turbo clamp). Note - The fitted images only show the resonated cat-back system. Please Note - This performance exhaust removes the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind. This exhaust is also available as a 'valved' option, please see related items. Note: This product fits Non-GPF models only, please see alternative listings for GPF models. Press Release Cars of the calibre of Audi's S3 require more careful consideration prior to development of a performance enhancing exhaust system. Both Cobra Sport's Technical and Research and Development teams were involved in the planning and preparation that went into the product testing and development of this new system to ensure that the correct balance was achieved between aesthetics and power to make the most of the S3's 2.0 TFSi engine. The Cobra Sport system delivers significant power increases, but its glory has to be in the weight saving achieved. Swapping the Cat-back system results in a staggering 30% reduction in weight from the OE system's 26.9kg, with the Cobra Sport alternative weighing in at 18.8kg on like for like components. You can be assured of only the highest quality materials being used in the production of all Cobra Sports exhaust systems with the highest quality grade 304 stainless steel used throughout the components and each exhaust being hand finished and individually TIG welded at our Sheffield factory. The levels of quality achieved enables us to offer a lifetime guarantee on all exhaust systems which provides the ultimate piece of mind for the customer. The Cobra Sport's quad exit system benefits from a choice angled tailpipes which can be finished in either matt black or original highly polished stainless steel. The end result of this attention to detail, is an ultra-lightweight system which compliments the S3's body styling and sporting pedigree while delivering enhanced performance and handling capabilities. Media Example of Audi S3 (3 door) sports exhaust (cat-back - resonated). Example of Audi S3 (3 door) sports exhaust (turbo-back system - sports cat & resonated). Example of Audi S3 (saloon) sports exhaust (cat-back - non-resonated). Example of Audi S3 (saloon) sports exhaust (turbo-back system - de-cat & non-resonated). Example of Audi S3 (saloon) sports exhaust (turbo-back system - de-cat & non-resonated). British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less