Performance - Audi A4 B8 (2007-2015)

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your facelift B8.5 S4 or A4 S-Line. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your pre-facelift B8 S4 or A4 S-Line. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details The engineers at ECS Tuning have developed a 2-piece Tru-Float Wave style rotor that combines the advantages of weight savings and rapid heat dissipation, providing a rotor superior to stock while preventing warping and extending component life. The reduction of unsprung weight (by 3.5 pounds per rotor) improves handling characteristics under all situations and offers real world benefits that can be felt on both the street and track! All-around improvement in one performance minded package. Features include: Weight savings: The B8 S4/S5 ECS 2-Piece Tru-Float wave rotors weigh only 13 lbs each, compared to the stock rotor at 16.5 lbs. The lighter 2-piece rotor reduces unsprung weight and rotational inertia, improving suspension performance. The unique wave pattern further reduces weight at the outer most portion of the rotor, reducing both unsprung weight and more importantly the rotational inertia of the rotor, further improving acceleration and braking performance compared to a non-wave design. Lightweight, precision machined 6061-T6 aluminum hat, which is hard anodized with an attractive matte black finish that is both durable and corrosion resistant. Gray cast iron rings: High quality FC-30 cast iron with a high carbon content improves wear properties at elevated temperatures and has excellent thermal conductivity as well as vibration damping properties.  Friction surfaces are precision ground to ensure parallel surfaces and improve pad bed in, then assembled rotors are precision balanced for vibration free operation. Heat treating reduces the tendency for rotor cracking by reducing internal rotor stresses. Durability: Non-friction ring surfaces, including internal vents, are painted to resist salt and other corrosives. Tru-Float design: The full float design allows independent radial and lateral thermal expansion and movement. Both of these features reduce thermal stresses on the rotor due to uneven thermal loading under hard braking. The design of our rotor hat conducts less heat into the bearings due to the reduced contact area between the rotor and the hat, improving bearing life. The radial expansion capacity allows the ring to increase in diameter without being restrained by the hat, reducing the tendency to “cone” or distort toward the outer braking surface, which improves pedal feel and pad wear characteristics The lateral float capability allows the rotor to self-center between the pads, improving pad wear and reducing drag. It also reduces the effects of pad knock back, which is the tendency of the rotor to push the pistons back in to the calipers due to wheel bearing deflection under extreme loading, resulting in a soft pedal and inconsistent braking. Reducing or eliminating knock back by allowing lateral float results in a more consistent pedal feel and braking Improved cooling: ECS 2-Piece rotors feature side-specific directionally curved vanes which pump air through the rotor at a higher velocity, leading to consistent, rapid cooling on both sides equally.    Conventional B8 S4/S5 rotors are curved-vaned, but use the same rotor for both sides of the vehicle. This compromise inefficiently pumps air from the outer diameter to the inner diameter of one rotor, working against the natural centrifuge effect. This significantly reduces air flow and thermal conductivity on one side of the vehicle, resulting in uneven braking cooling and performance from side to side. Rotor rings feature 48 vanes compared to 45 on the stock rotors and feature a whopping 55% increase in internal surface area to further improve cooling efficiency compared to the stock rotors. Drilled and slotted: 2-Piece Tru-Float rotors are cross drilled to promote cross ventilation for improved cooling as well as slotted to clean brake pads and carry away water and brake dust. Cleaner brake pads result in faster, more consistent stopping. Drilled holes are chamfered while slots are machined with a ball end mill - both to prevent cracking that may be present on improperly machined rotors. Manufacturing quality: Designed and tested in-house by ECS Tuning's leading team of engineers Manufactured exclusively for ECS Tuning in an ISO 9001 certified facility Ready for a replacement rotor set? ECS offers discounts on pairs of replacement rotors to the original customer or customers showing proof of ownership. Please contact the Sales Department for additional information. This Part Fits the Following Vehicles Make Model Submodel Engine Audi A7 C7 3.0 TDI Audi A7 C7 3.0T Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 All 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi B8 S5 Quattro All Audi B8 S5 All 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 All V8 4.2L Audi B8 SQ5 Quattro 3.0T Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi C7 A6 Quattro 3.0 TDI Audi C7 A6 FWD V6 3.0T Audi C7 A6 Quattro V6 3.0T Audi D4 A8 Quattro 3.0 TDI Audi D4 A8 Quattro 3.0T Audi Q5 Quattro 3.0 TDI Audi Q5 Quattro 3.0T Audi Q5 Quattro 3.2L *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Remove abrasive metal particles from drivetrain fluid to ensure longevity. ECS Tuning's Magnetic Plugs are engineered in-house for a perfect fit and feature a permanent magnet fastened to the plug body. The magnet attracts and holds minute abrasive and ferrous metal particles, preventing their circulation through lubrication systems. Metal particles can appear in lubricating or hydraulic systems as a result of the following conditions: The constant flaking effect due to normal wear of moving parts Particles not removed by flushing operations after boring or machining Chipping due to sub-surface casting flaws Minute component breakdown caused by stress usage A combination of these factors can account for the presence of metal particles, which can cause excessive wear to vital components unless they are removed. By holding these particles, ECS Tuning's Magnetic Plugs help prevent excessive wear to the internal components of your drivetrain. Relieve worry and prevent excessive wear with ECS Tuning's Magnetic Plugs. This drain plug includes 10 copper crush washers which MUST be replaced each oil service. For replacement see es1899296 for future oil changes. Previous Revisions ECSD001-10cw 001196ECS01AKT This Part Fits the Following Vehicles Make Model Submodel Engine Audi All All 1.8T Audi All All 2.0T Audi All All 2.7T Audi All All 3.2L Audi 8U Q3 FWD 2.0T Audi 8U Q3 Quattro 2.0T Audi A3 8P FWD 2.0T Audi A3 8P FWD TDI Audi A3 8P Quattro 2.0T Audi A3 8P Quattro 3.2L Audi A3 8P Quattro V6 3.2L Audi A3 8P FWD 2.0T Audi A3 8P Quattro 2.0T Audi A7 C7 3.0 TDI Audi B5 A4 FWD 1.8T Audi B5 A4 Quattro 1.8T Audi B5 A4 FWD 1.8T Audi B5 A4 Quattro 1.8T Audi B5 S4 All 2.7T Audi B6 A4 FWD V6 30v Audi B6 A4 Quattro V6 30v Audi B6 A4 FWD 1.8T Audi B6 A4 Quattro 1.8T Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi B7 A4 Quattro V6 3.2L Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi B7 RS4 All V8 Audi B8 A4 Quattro V6 3.2L Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 RS5 All 4.2L Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi B8 SQ5 Quattro 3.0T Audi C5 A6 FWD V6 2.8L Audi C5 A6 Quattro V6 2.8L Audi C5 A6 FWD V6 3.0L Audi C5 A6 Quattro V6 3.0L Audi C5 A6 All V6 30v Audi C5 Allroad All 2.0T Audi C6 A6 All V6 3.0T Audi C6 A6 FWD V6 3.2L Audi C6 A6 Quattro V6 3.2L Audi C6 S6 All V10 5.2L Audi C7 A6 Quattro 3.0 TDI Audi C7 A6 FWD 2.0T Audi C7 A6 Quattro 2.0T Audi C7 S6 Quattro 4.0T Audi C7 S7 Quattro 4.0T Audi D3 S8 Quattro D3 V10 Audi D4 S8 Quattro 4.0T Audi Q5 Quattro 3.0T Audi Q5 Quattro 2.0T Audi Q7 All 3.0T Audi Q7 All V8 Audi RS7 Quattro 4.0T Audi TT MKI FWD 180HP Audi TT MKI Quattro 180HP Audi TT MKI Quattro 225HP Audi TT MKI Quattro 3.2L Audi TT MKII FWD 2.0T Audi TT MKII Quattro 2.0T Audi TT MKII TTS 2.0T Audi TTS MK2 (2006-2013) 2.0T MINI All All All Porsche Cayenne Base V6 3.0L Porsche Cayenne Base V6 3.2L Porsche Cayenne Base V6 3.6L Porsche Cayenne Base V6 3.6L M55.01 Porsche Cayenne Base V6 3.6L M55.02 Porsche Cayenne Base V6 3.6L MCE.YA Volkswagen All All 1.8T Volkswagen All All 2.0T Volkswagen All All 3.2L Volkswagen 337/20AE All 1.8T Volkswagen Arteon 4Motion 2.0T Gen3 Volkswagen Arteon FWD 2.0T Gen3 Volkswagen Cabrio III All 2.0 Volkswagen CC 4Motion VR6 Volkswagen CC FWD 2.0T Volkswagen CC FWD VR6 Volkswagen CC 4Motion VR6 Volkswagen Corrado All G60 Volkswagen Corrado All VR6 12v Volkswagen EOS All 2.0T Volkswagen Golf II All 16v Volkswagen Golf II All 8v Volkswagen Golf II All Diesel Volkswagen Golf III All 2.0 Volkswagen Golf III All TDI Volkswagen Golf III All VR6 12v Volkswagen Golf IV All 1.8T Volkswagen Golf IV All 2.0 Volkswagen Golf IV All TDI Volkswagen Golf IV All VR6 12v Volkswagen Golf IV All VR6 24v Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf V All 2.5 Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen TDI Volkswagen Jetta II All 16v Volkswagen Jetta II All 8v Volkswagen Jetta II All Diesel Volkswagen Jetta III All 2.0 Volkswagen Jetta III All TDI Volkswagen Jetta III All VR6 12v Volkswagen Jetta IV All 1.8T Volkswagen Jetta IV All 2.0 Volkswagen Jetta IV All TDI Volkswagen Jetta IV All VR6 12v Volkswagen Jetta IV All VR6 24v Volkswagen Jetta IV GLI All 1.8T Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sedan 2.5 Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen TDI Volkswagen Jetta VI Sedan 1.4T Hybrid Volkswagen Jetta VI Sedan 1.8T Gen3 Volkswagen Jetta VI Sedan 2.0 Volkswagen Jetta VI Sedan 2.0T Gen3 GLI Volkswagen Jetta VI Sedan 2.5 Volkswagen Jetta VI Sedan GLI Volkswagen Jetta VI Sedan Facelift 1.4T Hybrid Volkswagen Jetta VI Sedan Facelift 1.8T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VII Sedan 1.4T Volkswagen New Beetle All 1.8T Volkswagen New Beetle All 2.0 Volkswagen New Beetle All 2.5L Volkswagen New Beetle All TDI Volkswagen Passat B3 All 16v Volkswagen Passat B3 All VR6 12v Volkswagen Passat B4 All 2.0 Volkswagen Passat B4 All TDI Volkswagen Passat B4 All VR6 12v Volkswagen Passat B5 4 Motion V6 30v Volkswagen Passat B5 4 Motion W8 Volkswagen Passat B5 FWD TDI Volkswagen Passat B5 FWD V6 30v Volkswagen Passat B5 4 Motion 1.8T Volkswagen Passat B5 FWD 1.8T Volkswagen Passat B6 4 Motion 3.6L Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B6 FWD 3.6L Volkswagen Passat B7 FWD 1.8T Gen3 Volkswagen Passat B7 All 2.5L Volkswagen Passat B7 All TDI Volkswagen Passat B7 All V6 Volkswagen Phaeton 4 Motion W12 Volkswagen R32 MKIV All 3.2 Volkswagen R32 MKV All 3.2 Volkswagen Scirocco II All 16v Volkswagen Scirocco II All 8v Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Touareg 1 All TDI Volkswagen Touareg 1 All V6 Volkswagen Touareg 2 All TDI Volkswagen Touareg 2 All V10 TDI Volkswagen Touareg 2 All V6 Volkswagen Touareg 2 All V6 TDI Volkswagen Touareg 3 All V6 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

So you changed the look of the front and rear of your B8/B8.5 A4 or S4 but forgot the sides?  Upgrade your exterior styling with the ECS Tuning Gloss Black Flat Side Splitters. These side skirts simply bolt on underneath the rocker panel with included self tapping screws and add a more sporty appearance to your vehicle. A great looking stand-alone body part or one that compliments other existing exterior styling upgrades.  Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment, each set is crafted of gloss black, UV stabilized ABS polymer to achieve its world class appearance and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Convenient, pre-drilled mounting holes allow you to correctly align and secure the side skirt extensions to the rocker panels. We suggest putting a dab of a rust preventative (anti seize or similar) on the tip of each screw before install.  This will lubricate the screw and protect the newly threaded holes.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B8.5 A4 S-Line or S4 with the ECS Tuning gloss black front lip spoiler. With a flatter "splitter" style profile, this quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Lip Spoiler is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. If you are looking for a whole package, this splitter style front lip is designed to match and compliment our flat side skirts (ES4045736) and rear bumper side splitters (ES4044452).  To further compliment the look of your new front lip, check out all of the other ECS gloss black accessories, only available from ECS Tuning! *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

These Schwaben Ramps are  lightweight at only 4 lbs each and easy to carry and maneuver. They will not slip, slide or scoot on any surface and never scratches or marks your floor. These ramps are 100% solid core construction for additional strength. These are ideal for smaller sports cars with short noses. Please take measurement below before ordering. Great for quick oil changes and underbody maintenance. Fits tires up to 8" wide. One set holds up to 3000 lbs. Ramps have have handy carrying straps. Please see handy chart below to see if our 30" Schwaben ramps are right for your vehicle! How to measure your car for fitment. 1. Take a yard stick, wedge it under the front inside edge of the front tire. 2. Raise the yard stick up until it hits the underside of your car( the spoiler. 3. Measure from the tip of the yardstick to the ground, vertically. If your measurement is 10.5" or greater, you can clear the ramps without a problem. Cross Reference race ramps, car ramps This Part Fits the Following Vehicles Make Model Submodel Engine Audi All All All BMW All All All Mercedes Benz All All All MINI All All All Porsche All All All Volkswagen All All All *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Reduce weight. Reduce heat. Reduce warping. Full Floating. ECS Tuning engineered 2-Piece Tru-Float wave style rotors offer real world benefits that can be felt on both the street and track! Our 2-Piece Tru-Float rotors combine the advantages of weight savings and rapid heat dissipation to provide a rotor superior to stock while preventing warping and extending component life.  Features include: Weight savings: The R8/RS5 ECS 2-Piece Tru-Float wave rotors weigh only 22.45 lb each, compared to the stock rotor at 23.25 lb. The reduced weight of a 2 piece rotor reduces unsprung weight and rotational inertia, improving suspension performance. ​The unique wave pattern further reduces weight at the outer most portion of the rotor, reducing both unsprung weight and more importantly the rotational inertia of the rotor, further improving acceleration and braking performance compared to a non-wave design.            Lightweight, precision machined 6061-T6 aluminum hat hard anodized with an attractive matte black finish that is both durable and corrosion resistant. ​Gray cast iron rings: High quality FC-30 cast iron with high a carbon content improves wear properties at elevated temperatures and has excellent thermal conductivity and vibration damping properties.  Friction surfaces are precision ground to ensure perfectly parallel surfaces and improve pad bed in, and rotors are precision balanced for vibration free operation. Heat treating reduces the tendency for rotor cracking by reducing internal rotor stresses. Durability: Non-friction ring surfaces, including internal vents, are painted to resist salt and other corrosives. Tru-Float design:  The full float design allows independent radial and lateral thermal expansion and movement.  Both of these features reduce thermal stresses on the rotor due to uneven thermal loading under hard braking. The full float design conducts less heat in to the bearings due to reduced contact area between the rotor and the hat, improving bearing life. The radial expansion allows the ring to increase in diameter without being restrained by the hat, reducing the tendency to “cone” or distort toward the outer braking surface, improving pedal feel and pad wear characteristics The lateral float capability allows the rotor to self-center between the pads, improving pad wear and reducing drag.  It also reduces the effects of pad knock back, which is the tendency of the rotor to push the pistons back in to the calipers due to wheel bearing deflection under extreme loading, resulting in a soft pedal and inconsistent braking.  Reducing or eliminating knock back by allowing the rotor to float and self-center results in a more consistent pedal feel and braking ​Improved cooling:  ECS 2-Piece rotors feature side-specific directionally curved vanes which pump air through the rotor at a higher velocity, leading to consistent, rapid cooling on both sides equally.     Conventional RS5/R8 rotors are curved-vaned, but use the same rotor for both sides of the vehicle. This compromise inefficiently pumps air from the outer diameter to the inner diameter of one rotor, working against the natural centrifuge effect.  This significantly reduces air flow and thermal conductivity on one side of the vehicle, resulting in uneven braking cooling and performance from side to side. Rotor rings feature 48 veins compared to 45 on the stock rotors and feature a whopping 55% increase in internal surface area to further improve cooling efficiency compared to the stock rotors. ​Drilled and slotted: 2-Piece Tru-Float rotors are cross drilled to promote cross ventilation for improved cooling as well as slotted to clean brake pads and carry away water and brake dust. Cleaner brake pads result in faster, more consistent stopping. Drilled holes are chamfered while slots are machined with a ball end mill - both to prevent cracking that may be present on improperly machined rotors. Manufacturing quality: Manufactured exclusively for ECS Tuning in an ISO 9001 certified facility Ready for a replacement rotor set? ECS offers discounts on pairs of replacement rotors to the original customer or customers showing proof of ownership. Please contact the Sales Department for additional information. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 RS5 All 4.2L Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi MK1 R8 Quattro V10 5.2L Audi MK1 R8 Quattro V8 4.2L Audi Q5 Quattro 2.0T Audi Q5 Quattro 3.0 TDI Audi Q5 Quattro 3.0T Audi Q5 Quattro 3.2L *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Don't you wish all of the caps under your hood matched? Your oil cap is black and you may have already replaced your coolant cap with a black one or even an R8 or Porsche cap. However, it is nearly impossible to find a black washer fluid reservoir cap to tie it all together --- until now. ECS is now offering the black washer cap you have always wanted!  This cap is not just for looks either. It keeps dirt and debris from entering the washer fluid pump and lines and clogging them up, and keeps the washer fluid from escaping and being wasted. Due to the temperatures reached in the engine bay, the cap can sometimes become brittle and crack, or even just fade out. Keep your washer system operating properly and your engine bay looking clean by replacing yours today. This is a 54mm cap. Cross Reference black washer cap, ECS cap This Part Fits the Following Vehicles Make Model Submodel Engine Audi 100 FWD V6 Audi 100 Quattro V6 Audi 4M Q7 Quattro 2.0T Audi 4M Q7 Quattro 3.0T Audi 4M Q8 Quattro 3.0T Audi 8S TTRS Quattro 2.5T Audi 8U Q3 FWD 2.0T Audi 8U Q3 Quattro 2.0T Audi 8V S3 Quattro 2.0T Audi A3 8P FWD 2.0T Audi A3 8P FWD TDI Audi A3 8P Quattro 2.0T Audi A3 8P Quattro 3.2L Audi A3 8P Quattro V6 3.2L Audi A3 8V FWD 1.4 e-tron Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V FWD TDI Audi A3 8V Quattro 2.0T Audi A7 C7 3.0 TDI Audi A7 C7 3.0T Audi B5 A4 FWD 1.8T Audi B5 A4 FWD V6 12v Audi B5 A4 FWD V6 30v Audi B5 A4 Quattro 1.8T Audi B5 A4 Quattro V6 12v Audi B5 A4 Quattro V6 30v Audi B5 S4 All 2.7T Audi B6 A4 FWD 1.8T Audi B6 A4 FWD V6 30v Audi B6 A4 Quattro 1.8T Audi B6 A4 Quattro V6 30v Audi B6 S4 All V8 Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi B7 A4 Quattro V6 3.2L Audi B7 RS4 All V8 Audi B7 S4 All V8 Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 Allroad Quattro 2.0T Audi B8 RS5 All 4.2L Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi B8 SQ5 Quattro 3.0T Audi C4 A6 FWD 2.8 Audi C4 A6 Quattro 2.8 Audi C4 S4 Quattro 20v T Audi C4 S6 Quattro 20v T Audi C5 A6 FWD V6 2.8L Audi C5 A6 FWD V6 3.0L Audi C5 A6 Quattro 2.7T Audi C5 A6 Quattro 4.2 Audi C5 A6 Quattro V6 2.8L Audi C5 A6 Quattro V6 3.0L Audi C5 Allroad Quattro 2.7T Audi C5 Allroad Quattro 4.2L Audi C5 S6 Quattro 4.2 Audi C6 A6 FWD V6 3.2L Audi C6 A6 Quattro V6 3.2L Audi C6 A6 Quattro V8 4.2L Audi C6 S6 All V10 5.2L Audi C7 A6 FWD 2.0T Audi C7 A6 FWD V6 3.0T Audi C7 A6 Quattro 2.0T Audi C7 A6 Quattro 3.0 TDI Audi C7 A6 Quattro V6 3.0T Audi C7 S6 Quattro 4.0T Audi C7 S7 Quattro 4.0T Audi D2 A8 FWD 3.7 Audi D2 A8 Quattro 4.2 Audi D2 S8 Quattro D2 4.2L Audi D3 A8 Quattro 4.2 Audi D3 A8 Quattro W12 Audi D3 S8 Quattro D3 V10 Audi MK3 TT (2014+) Quattro 2.0T Audi Q5 Quattro 2.0T Audi Q5 Quattro 3.0 TDI Audi Q5 Quattro 3.0T Audi Q5 Quattro 3.2L Audi Q7 All 3.0T Audi Q7 All TDI Audi Q7 All V6 Audi Q7 All V8 Audi RS3 8V (2018+) 2.5T Audi RS7 Quattro 4.0T Audi TTS MK3 (2014+) 2.0T Volkswagen 337/20AE All 1.8T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Arteon 4Motion 2.0T Gen3 Volkswagen Arteon FWD 2.0T Gen3 Volkswagen Atlas 4Motion 2.0T Gen3 Volkswagen Atlas 4Motion 3.6L V6 Volkswagen Atlas FWD 2.0T Gen3 Volkswagen Atlas FWD 3.6L V6 Volkswagen Beetle All 1.8T Gen3 Volkswagen Beetle All 2.0T Volkswagen Beetle All 2.0T Gen3 Volkswagen Beetle All 2.5L Volkswagen Beetle All TDI Volkswagen CC 4Motion VR6 Volkswagen CC FWD 2.0T Volkswagen CC FWD VR6 Volkswagen Corrado All G60 Volkswagen Corrado All VR6 12v Volkswagen EOS All 2.0T Volkswagen EOS All 3.2L Volkswagen Eurovan T4 All 5cl Diesel Volkswagen Eurovan T4 All 5cyl Volkswagen Eurovan T4 All VR6 Volkswagen Eurovan T4 All VR6 12v Volkswagen Eurovan T4 All VR6 24v Volkswagen Golf IV All 1.8T Volkswagen Golf IV All 2.0 Volkswagen Golf IV All TDI Volkswagen Golf IV All VR6 12v Volkswagen Golf IV All VR6 24v Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta IV All 1.8T Volkswagen Jetta IV All 16v Volkswagen Jetta IV All 2.0 Volkswagen Jetta IV All TDI Volkswagen Jetta IV All VR6 12v Volkswagen Jetta IV All VR6 24v Volkswagen Jetta IV Wagon All Volkswagen Jetta IV GLI All 1.8T Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sedan 1.4T Hybrid Volkswagen Jetta VI Sedan 1.8T Gen3 Volkswagen Jetta VI Sedan 2.0 Volkswagen Jetta VI Sedan 2.0T Gen3 GLI Volkswagen Jetta VI Sedan 2.5 Volkswagen Jetta VI Sedan GLI Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift 1.4T Volkswagen Jetta VI Sedan Facelift 1.4T Hybrid Volkswagen Jetta VI Sedan Facelift 1.8T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0L Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen New Beetle All 1.8T Volkswagen New Beetle All 16v Volkswagen New Beetle All 2.0 Volkswagen New Beetle All 2.5L Volkswagen New Beetle All TDI Volkswagen Passat B3 All 16v Volkswagen Passat B3 All VR6 12v Volkswagen Passat B4 All 2.0 Volkswagen Passat B4 All TDI Volkswagen Passat B4 All VR6 12v Volkswagen Passat B5 4 Motion 1.8T Volkswagen Passat B5 4 Motion V6 30v Volkswagen Passat B5 4 Motion W8 Volkswagen Passat B5 FWD 1.8T Volkswagen Passat B5 FWD TDI Volkswagen Passat B5 FWD V6 30v Volkswagen Passat B6 4 Motion 3.6L Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B6 FWD 3.6L Volkswagen Passat B7 FWD 1.8T Gen3 Volkswagen Passat B7 FWD 2.0T Gen3 Volkswagen Phaeton 4 Motion V8 Volkswagen Phaeton 4 Motion W12 Volkswagen R32 MKIV All 3.2 Volkswagen R32 MKV All 3.2 Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T Volkswagen Tiguan MQB 4Motion 2.0T Gen3 Volkswagen Tiguan MQB FWD 2.0T Gen3 Volkswagen Touareg 1 All TDI Volkswagen Touareg 1 All V6 Volkswagen Touareg 1 All V8 Volkswagen Touareg 2 All TDI Volkswagen Touareg 2 All V10 TDI Volkswagen Touareg 2 All V6 Volkswagen Touareg 2 All V6 TDI Volkswagen Touareg 2 All V8 Volkswagen Touareg 3 Hybrid All *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Having the right tools for the job at hand makes any task much easier, and less time consuming. This Schwaben VAG Connector Removal Tool can easily be a best friend to any DIY enthusiast. The tool fits directly on the push & pull style VAG connector and gives just the perfect amount of leverage to release the connector and not break the tab. This style connector is often found on mass air flow (MAF) sensor, coil packs, headlights/fog lights, level sensors, MAP sensors, and etc.. A large ergonomic ball that fits into your palm is also fitted on the end of the tool for extra grip when pulling the connector off. Save your connectors, your thumbs, and some time with this innovative tool from Schwaben Tools. For California Prop 65 warning see:  www.P65Warnings.ca.gov. and photo below. Cross Reference tools This Part Fits the Following Vehicles Make Model Submodel Engine Audi All All All Porsche All All All Volkswagen All All All *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Safety first! Make sure to use our Schwaben wheel chocks when using your ramps. All-rubber wheel chocks. Tailored to use with all Schwaben ramp products. Cross Reference tools, schwaben This Part Fits the Following Vehicles Make Model Submodel Engine Audi All All All BMW All All All Mercedes Benz All All All MINI All All All Porsche All All All Volkswagen All All All *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details In most vehicle applications, the rubber turbo inlet hoses found in the intake system are not designed for performance or modification. They were designed to get the job done, but when you add a performance filter, intake, or tune the stock hoses can start to show their weakness. The ECS Silicone Turbo Inlet Hose was engineered in-house with a high quality 5-ply construction, providing a strong but flexible structure to ensure a secure fit. A smooth interior provides unimpeded airflow, while the smooth, unassuming exterior adds an appearance upgrade to any engine bay.  ECS' Silicone Turbo Inlet Hose arrives with the necessary clamps for proper installation.  This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A5 Quattro 2.0T Audi B8 Allroad Quattro 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Protect your expensive mag wheels with Schwaben coated six-point, deep-well impact sockets. Schwaben Protecta Sockets have color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets. 17mm, 19mm and 21mm Sockets included Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications. Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution. For California Prop 65 warning see:  www.P65Warnings.ca.gov. and photo below. Previous Revisions PPS-1721 23091017 23091019 B8800024 This Part Fits the Following Vehicles Make Model Submodel Engine Audi All All All BMW All All All Mercedes Benz All All All MINI All All All Porsche All All All Volkswagen All All All *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details ECS Tuning engineered 2-Piece semi-floating rotors offer real world benefits that can be felt on both the street and track! Our 2-Piece rotors combine the advantages of weight savings and rapid heat dissipation to provide a rotor superior to stock while preventing warping and extending component life. The reduction of unsprung weight (by 3 pounds per rotor) improves handling characteristics under all situations. This reduction in rotational inertia allows for quicker acceleration, decreased braking distances, and more responsive handling. Features include: Aluminum hats: To save weight, each rotor ring is bolted to a lightweight aluminum hat made from high quality 6061 aluminum, and hard anodized with an attractive matte black finish that is both durable and corrosion resistant. Gray cast iron rings: Long known for its wear resistance and stable friction characteristics, cast iron is favored for brake rotors due to its ability to absorb and dissipate large amounts of heat. 2-Piece construction: Conventional rotors are unable to cope with the stress of drastic heat fluctuations and are prone to warping. ECS 2-Piece semi-floating rotors allow the radial expansion of the rotor ring - preventing warping. Heat treated: Heat treating further reduces the tendency for rotor cracking by reducing internal rotor stresses. Directionally veined: Conventional S4/S5/Q5 rotors are curved-veined only going one way so heat is dissipated much faster on one side than the other, and rely on an inefficient centrifuge-like effect to evacuate hot air from within the rotor. ECS 2-Piece rotors feature directionally curved veins, directional veins accelerate air away from the rotor at a higher velocity, leading to consistent, rapid cooling on both side equally. Drilled and slotted: 2-Piece rotors are cross drilled to promote cross ventilation for improved cooling as well as slotted to clean brake pads and carry away water and brake dust. Cleaner brake pads result in faster, more consistent stopping. Drilled holes are chamfered while slots are machined with a ball end mill - both to prevent cracking that may be present on improperly machined rotors. Overall weight savings: This particular ECS 2-Piece rotor weighs only 13.5 lb compared to a stock S4/S5/Q5 rotor (16.5 lb). Lighter rotors reduce unsprung weight and rotational mass to improve both braking and suspension performance. Manufacturing quality: Non-friction ring surfaces, including internal vents, are painted to resist salt and other corrosives. Ground braking surfaces ensure rings run parallel, and pads bed easily. Includes ECS Stainless Rotor Set Screws to eliminate rusty factory fasteners Ready for a re-ring? ECS offers discounts on pairs of replacement rotors to the original customer or customers showing proof of ownership. Please contact the Sales Department for additional information. This Part Fits the Following Vehicles Make Model Submodel Engine Audi A7 C7 3.0 TDI Audi A7 C7 3.0T Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 All 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi B8 S5 Quattro All Audi B8 S5 All 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 All V8 4.2L Audi B8 SQ5 Quattro 3.0T Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi C7 A6 Quattro 3.0 TDI Audi C7 A6 FWD V6 3.0T Audi C7 A6 Quattro V6 3.0T Audi D4 A8 Quattro 3.0 TDI Audi D4 A8 Quattro 3.0T Audi Q5 Quattro 3.0 TDI Audi Q5 Quattro 3.0T Audi Q5 Quattro 3.2L *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Remove abrasive metal particles from drivetrain fluid to ensure longevity. ECS Tuning's Magnetic Plugs are engineered in-house for a perfect fit and feature a permanent magnet fastened to the plug body. The magnet attracts and holds minute abrasive and ferrous metal particles, preventing their circulation through lubrication systems. Metal particles can appear in lubricating or hydraulic systems as a result of the following conditions: The constant flaking effect due to normal wear of moving parts Particles not removed by flushing operations after boring or machining Chipping due to sub-surface casting flaws Minute component breakdown caused by stress usage A combination of these factors can account for the presence of metal particles, which can cause excessive wear to vital components unless they are removed. By holding these particles, ECS Tuning's Magnetic Plugs help prevent excessive wear to the internal components of your drivetrain. These plugs were also designed to feature a very common 17mm hex head, eliminating the need for a special allen socket required for OEM plugs. Relieve worry and prevent excessive wear with ECS Tuning's Magnetic Plugs. *May interfere with aftermarket body cross braces*  This Part Fits the Following Vehicles Make Model Submodel Engine Audi B5 A4 Quattro 1.8T Audi B5 A4 Quattro V6 12v Audi B5 A4 Quattro V6 30v Audi B5 S4 All 2.7T Audi B6 A4 FWD 1.8T Audi B6 A4 Quattro 1.8T Audi B6 A4 Quattro V6 30v Audi B6 A4 Quattro 1.8T Audi B6 A4 Quattro V6 30v Audi B6 S4 All V8 Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi B7 A4 Quattro V6 3.2L Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro All Audi B7 A4 Quattro 2.0T Audi B7 A4 Quattro V6 3.2L Audi B7 RS4 All V8 Audi B7 S4 All V8 Audi B8 A4 Quattro 2.0T Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro V8 4.2L Audi B8 S5 Quattro 3.0T Coupe Audi C5 A6 All 2.7T Audi C5 A6 Quattro 2.7T Audi C5 A6 Quattro 4.2 Audi C5 A6 Quattro V6 2.8L Audi C5 A6 Quattro V6 3.0L Audi C5 Allroad Quattro 2.7T Audi C5 Allroad Quattro 4.2L Audi C5 S6 Quattro 4.2 Audi C7 S6 Quattro 4.0T Audi C7 S7 Quattro 4.0T Audi D2 A8 Quattro 4.2 Audi D2 S8 Quattro D2 4.2L Audi D3 A8 Quattro 4.2 Audi D3 A8 Quattro W12 Audi D3 S8 Quattro D3 V10 Audi RS6 All 4.2T Porsche All All All Porsche Macan Base L4 2.0L Porsche Macan GTS V6 3.0L Porsche Macan S V6 3.0L Porsche Macan S V6 3.0L MCT.MA Porsche Macan Turbo V6 3.6L Porsche Macan Turbo V6 3.6L MCT.LA Volkswagen Alltrack All 1.8T Gen3 Volkswagen Beetle All 2.0T Volkswagen Beetle All 2.0T Gen3 Volkswagen Beetle All TDI Volkswagen CC FWD 2.0T Volkswagen EOS All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf VI All 2.0T Volkswagen Golf VI All TDI Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta V All 2.0T Volkswagen Jetta V All TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sedan 2.0T Gen3 GLI Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VI Sedan GLI Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen TDI Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B7 FWD 2.0T Gen3 Volkswagen Passat B7 All TDI *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Upgrade your intake system with the ECS Tuning Luft-Technik Intake Air Scoop! This air scoop works with your OEM or ECS Tuning Kohlefaser Luft-Technik/Luft-Technik Intake System to guide more air into the intake tract. The Luft-Technik Intake Air Scoop was engineered and designed in-house to replace the shorter existing scoop equipped from the factory, extending farther down behind the grille to capture more incoming air and route it to the intake system.  Installs using factory hardware and is completely reversible, no additional hardware or modifications required. For help with installation please view our PDF located under the Installation tab. *This Performance Intake Air Scoop will work with both ECS Tuning intake systems as well as the OEM system. May be compatible with other aftermarket systems that do not modify the factory air scoop or protrude past the core support. **This product will not work with the APR Coolant Performance System for the B8 S4 as the heat exchanger is too tall and comes in contact with the air scoop. ***A5/S5 owners:  Installation requires notching out a single rib on the back of the OEM grille.  This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details The Schwaben coil removal tool makes a hard job look easy. Designed to safely and easily remove coils from many VW/Audi coil-on-plug ignition systems, this handy special tool grabs each coil securely, to prevent damage caused by makeshift removal methods. Sturdy metal construction with large grip handle for added leverage. Try removing a stubborn coil without one, and you will soon appreciate its utility. For push-down coils only; not for bolt-down coils.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi All All 1.8T Audi All All 180HP Audi All All 2.0T Audi All All 225HP Audi All All 4.2 Audi All All 4.2L Audi All All V6 30v Audi All All V8 4.2L Audi A3 8P FWD 2.0T Audi A3 8P Quattro 2.0T Audi A7 C7 3.0T Audi B5 A4 FWD 1.8T Audi B5 A4 Quattro 1.8T Audi B5 S4 All 2.7T Audi B6 A4 FWD 1.8T Audi B6 A4 Quattro 1.8T Audi B6 S4 All V8 Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi B7 RS4 All V8 Audi B7 S4 All V8 Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A5 Quattro 2.0T Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi B8 SQ5 Quattro 3.0T Audi C5 A6 Quattro 2.7T Audi C5 Allroad All 2.0T Audi C5 Allroad Quattro 2.7T Audi C6 S6 All V10 5.2L Audi C7 A6 FWD 2.0T Audi C7 A6 Quattro 2.0T Audi C7 A6 FWD V6 3.0T Audi C7 A6 Quattro V6 3.0T Audi C7 A6 FWD 2.0T Audi C7 A6 Quattro 2.0T Audi C7 S6 Quattro 4.0T Audi C7 S7 Quattro 4.0T Audi D4 A8 Quattro 3.0T Audi D4 A8 Quattro 4.0T Audi D4 A8 All 4.2 Audi Q5 Quattro 2.0T Audi Q7 All 3.0T Audi Q7 All V8 Audi TT MKII FWD 2.0T Audi TT MKII Quattro 2.0T Audi TT MKII TTS 2.0T Audi TTS MK2 (2006-2013) 2.0T Porsche All Hybrid All Porsche All S E Hybrid All Porsche All S Hybrid All Volkswagen 337/20AE All 1.8T Volkswagen Beetle All 2.0T Volkswagen Beetle All 2.5L Volkswagen CC FWD 2.0T Volkswagen EOS All 2.0T Volkswagen Golf IV All 1.8T Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Jetta IV All 1.8T Volkswagen Jetta IV GLI All 1.8T Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sedan 2.5 Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sedan GLI Volkswagen New Beetle All 1.8T Volkswagen New Beetle All 2.5L Volkswagen Passat B5 4 Motion 1.8T Volkswagen Passat B5 FWD 1.8T Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B7 All 2.5L Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T Volkswagen Touareg 1 All V8 Volkswagen Touareg 2 All V8 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details This Stage 3 Big Brake Kit takes your braking to an extreme level using parts usually reserved for the high performance vehicles. Designed and engineered by ECS Tuning, this big brake kit will provide an entirely new level of braking performance. When adding more horsepower to your vehicle, it is imperative that you have a way to slow that power down and bring it your vehicle to a stop. One way to do that is to upgrade to larger brake rotors paired with 8-Piston RS5 calipers. Increase cooling capabilities along with greater stopping power. Complete kit for a bolt-on conversion that also includes ECS Tuning's own 2-piece Tru-Float cross drilled/slotted wave rotors, OEM RS5 brake calipers, and exact-fit stainless steel brake lines. The engineers at ECS Tuning have developed a lightweight directionally vaned 2-piece Tru-Float wave rotor that combines the advantages of weight savings and rapid heat dissipation to provide a rotor superior to stock while preventing warping and extending component life. Tru-Float Wave Rotor Features Include: Weight Savings - The ECS 2-Piece Tru-Float wave rotors reduce unsprung weight and rotational inertia, improving suspension performance. The lightweight precision machined 6061-T6 aluminum hat is hard anodized with an attractive matte black finish that is both durable and corrosion resistant.  The unique wave pattern further reduces weight at the outer most portion of the rotor, reducing both unsprung weight and more importantly the rotational inertia of the rotor, further improving acceleration and braking performance compared to a non-wave design. The full float design allows independent radial and lateral thermal expansion and movement.  The radial expansion allows the ring to increase in diameter without being restrained by the hat.  The lateral float capacity allows the rotor to self-center between the pads, improving pad wear and reducing drag.  Improved Cooling - The Tru-Float rotors feature side-specific directionally curved vanes which pump air through the rotor at a higher velocity, leading to consistant, rapid cooling on both sides equally.     With ECS Tuning's stainless steel lines, all of the pressure applied by your right foot makes it's way to the wheels. The stainless steel braided lines do not bulge, so  pressure is increased while pedal modulation is drastically decreased.  Kit includes: ECS Tuning's Front 2-Piece Cross Drilled/Slotted Tru Float Wave Rotors - Two (365x34) ECS Tuning's Front Exact-Fit Stainless Steel Brake Lines - Two Hawk HPS Front Brake Pad Set Front Left Black RS5 8-piston Caliper Front Right Black RS5 8-piston Caliper Front Left Splash Shield Front Right Splash Shield Pentosin Super DOT4 Brake Fluid - 1 Liter Caliper Hardware Front calipers include brake pad securing hardware, brackets, and bleeder screws. Interested in how this kit will fit with your wheel setup? Print out the attached wheel template guide and see if you will need any addition clearance. If so, we offer a full line of ECS Tuning wheel spacers and bolts. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 Allroad Quattro 2.0T Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi Q5 Quattro 2.0T Audi Q5 Quattro 3.0 TDI Audi Q5 Quattro 3.0T Audi Q5 Quattro 3.2L *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details The engineers at ECS Tuning have developed a 2-piece Tru-Float Wave style rotor that combines the advantages of weight savings and rapid heat dissipation, providing a rotor superior to stock while preventing warping and extending component life. The reduction of unsprung weight (by 6.7 pounds per rotor) improves handling characteristics under all situations and offers real world benefits that can be felt on both the street and track! All-around improvement in one performance minded package. Features include: Weight savings: The B8 S4/S5 ECS 2-Piece Tru-Float wave rotors weigh only 17.8 lbs each, compared to the stock rotor at 24.5 lbs. The lighter 2-piece rotor reduces unsprung weight and rotational inertia, improving suspension performance. The unique wave pattern further reduces weight at the outer most portion of the rotor, reducing both unsprung weight and more importantly the rotational inertia of the rotor, further improving acceleration and braking performance compared to a non-wave design. Lightweight, precision machined 6061-T6 aluminum hat, which is hard anodized with an attractive matte black finish that is both durable and corrosion resistant. Gray cast iron rings: High quality FC-30 cast iron with a high carbon content improves wear properties at elevated temperatures and has excellent thermal conductivity as well as vibration damping properties.  Friction surfaces are precision ground to ensure parallel surfaces and improve pad bed in, then assembled rotors are precision balanced for vibration free operation. Heat treating reduces the tendency for rotor cracking by reducing internal rotor stresses. Durability: Non-friction ring surfaces, including internal vents, are painted to resist salt and other corrosives. Tru-Float design: The full float design allows independent radial and lateral thermal expansion and movement. Both of these features reduce thermal stresses on the rotor due to uneven thermal loading under hard braking. The design of our rotor hat conducts less heat into the bearings due to the reduced contact area between the rotor and the hat, improving bearing life. The radial expansion capacity allows the ring to increase in diameter without being restrained by the hat, reducing the tendency to “cone” or distort toward the outer braking surface, which improves pedal feel and pad wear characteristics The lateral float capability allows the rotor to self-center between the pads, improving pad wear and reducing drag. It also reduces the effects of pad knock back, which is the tendency of the rotor to push the pistons back in to the calipers due to wheel bearing deflection under extreme loading, resulting in a soft pedal and inconsistent braking. Reducing or eliminating knock back by allowing lateral float results in a more consistent pedal feel and braking Improved cooling: ECS 2-Piece rotors feature side-specific directionally curved vanes which pump air through the rotor at a higher velocity, leading to consistent, rapid cooling on both sides equally.    Conventional B8 S4/S5 rotors are curved-vaned, but use the same rotor for both sides of the vehicle. This compromise inefficiently pumps air from the outer diameter to the inner diameter of one rotor, working against the natural centrifuge effect. This significantly reduces air flow and thermal conductivity on one side of the vehicle, resulting in uneven braking cooling and performance from side to side. Rotor rings feature 48 vanes compared to 45 on the stock rotors and feature a whopping 55% increase in internal surface area to further improve cooling efficiency compared to the stock rotors. Drilled and slotted: 2-Piece Tru-Float rotors are cross drilled to promote cross ventilation for improved cooling as well as slotted to clean brake pads and carry away water and brake dust. Cleaner brake pads result in faster, more consistent stopping. Drilled holes are chamfered while slots are machined with a ball end mill - both to prevent cracking that may be present on improperly machined rotors. Manufacturing quality: Designed and tested in-house by ECS Tuning's leading team of engineers Manufactured exclusively for ECS Tuning in an ISO 9001 certified facility Ready for a replacement rotor set? ECS offers discounts on pairs of replacement rotors to the original customer or customers showing proof of ownership. Please contact the Sales Department for additional information. This Part Fits the Following Vehicles Make Model Submodel Engine Audi A7 C7 3.0 TDI Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S4 All 3.0T Audi B8 S4 Quattro All Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 All 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi B8 S5 Quattro All Audi B8 S5 All 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 All V8 4.2L Audi C7 A6 Quattro 3.0 TDI Audi C7 A6 Quattro 2.0T Audi Q5 Quattro 3.0 TDI Audi Q5 Quattro 3.0T Audi Q5 Quattro 3.2L *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Reduce weight. Reduce heat. Reduce warping. ECS Tuning engineered 2-Piece semi-floating rotors offer real world benefits that can be felt on both the street and track! Our 2-Piece rotors combine the advantages of weight savings and rapid heat dissipation to provide a rotor superior to stock while preventing warping and extending component life. The reduction of unsprung weight improves handling characteristics under all situations. This reduction in rotational inertia allows for quicker acceleration, decreased braking distances, and more responsive handling. Features include: Aluminum hats: To save weight, each rotor ring is bolted to a lightweight aluminum hat made from high quality 6061 aluminum, and hard anodized with an attractive matte black finish that is both durable and corrosion resistant. Gray cast iron rings: Long known for its wear resistance and stable friction characteristics, cast iron is favored for brake rotors due to its ability to absorb and dissipate large amounts of heat. 2-Piece construction: Conventional rotors are unable to cope with the stress of drastic heat fluctuations and are prone to warping. ECS 2-Piece semi-floating rotors allow the radial expansion of the rotor ring - preventing warping. Heat treated: Heat treating of ECS 2-Piece rotors makes them stiffer and stronger - for improved performance and further prevention of warping. Directionally veined: Conventional RS5/R8 rotors are straight-veined, and rely on an inefficient centrifuge-like effect to evacuate hot air from within the rotor. ECS 2-Piece rotors feature curved, directional veins that accelerate air away from the rotor at a higher velocity, leading to consistent, rapid cooling. Drilled and slotted: 2-Piece rotors are cross drilled to promote cross ventilation for improved cooling as well as slotted to clean brake pads and carry away water and brake dust. Cleaner brake pads result in faster, more consistent stopping. Drilled holes are chamfered while slots are machined with a ball end mill - both to prevent cracking that may be present on improperly machined rotors. Overall weight savings: This particular ECS 2-Piece rotor weighs only 23.05 lbs compared to a stock rotor at 24.55 lbs. Lighter rotors reduce unsprung weight and rotational mass to improve both braking and suspension performance. Manufacturing quality: Non-friction ring surfaces, including internal vents, are painted to resist salt and other corrosives. Ground braking surfaces ensure rings run parallel, and pads bed easily. Includes ECS Stainless Rotor Set Screws to eliminate rusty factory fasteners Are your rotors worn and in need of replacement? ECS offers discounts on pairs of complete rotors to the original customer or customers showing proof of ownership. Please contact the Sales Department for additional information. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 RS5 All 4.2L Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi MK1 R8 Quattro V10 5.2L Audi MK1 R8 Quattro V8 4.2L Audi Q5 Quattro 2.0T Audi Q5 Quattro 3.0 TDI Audi Q5 Quattro 3.0T Audi Q5 Quattro 3.2L Audi R8 MK2 (2016+) V10 Plus *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Reduce weight. Reduce heat. Reduce warping. ECS Tuning engineered 2-Piece semi-floating rotors offer real world benefits that can be felt on both the street and track! Our 2-Piece rotors combine the advantages of weight savings and rapid heat dissipation to provide a rotor superior to stock while preventing warping and extending component life. The reduction of unsprung weight (by 6 pounds per rotor) improves handling characteristics under all situations. This reduction in rotational inertia allows for quicker acceleration, decreased braking distances, and more responsive handling. Features include: Aluminum hats: To save weight, each rotor ring is bolted to a lightweight aluminum hat made from high quality 6061 aluminum, and hard anodized with an attractive matte black finish that is both durable and corrosion resistant. Gray cast iron rings: Long known for its wear resistance and stable friction characteristics, cast iron is favored for brake rotors due to its ability to absorb and dissipate large amounts of heat. 2-Piece construction: Conventional rotors are unable to cope with the stress of drastic heat fluctuations and are prone to warping. ECS 2-Piece semi-floating rotors allow the radial expansion of the rotor ring - preventing warping. Heat treated: Heat treating further reduces the tendency for rotor cracking by reducing internal rotor stresses. Directionally veined: Conventional S4/S5/Q5 rotors are curved-veined only going one way so heat is dissipated much faster on one side than the other, and rely on an inefficient centrifuge-like effect to evacuate hot air from within the rotor. ECS 2-Piece rotors feature directionally curved veins, directional veins accelerate air away from the rotor at a higher velocity, leading to consistent, rapid cooling on both side equally. Drilled and slotted: 2-Piece rotors are cross drilled to promote cross ventilation for improved cooling as well as slotted to clean brake pads and carry away water and brake dust. Cleaner brake pads result in faster, more consistent stopping. Drilled holes are chamfered while slots are machined with a ball end mill - both to prevent cracking that may be present on improperly machined rotors. Overall weight savings: This particular ECS 2-Piece rotor weighs only 18.45 lb compared to a stock S4/S5/Q5 rotor (24.5 lb). Lighter rotors reduce unsprung weight and rotational mass to improve both braking and suspension performance. Manufacturing quality: Non-friction ring surfaces, including internal vents, are painted to resist salt and other corrosives. Ground braking surfaces ensure rings run parallel, and pads bed easily. Includes ECS Stainless Rotor Set Screws to eliminate rusty factory fasteners Ready for a replacement rotor set? ECS offers discounts on pairs of replacement rotors to the original customer or customers showing proof of ownership. Please contact the Sales Department for additional information. NOTE: ECS does not recommend disassembling the two piece rotors This Part Fits the Following Vehicles Make Model Submodel Engine Audi A7 C7 3.0 TDI Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 Allroad Quattro 2.0T Audi B8 S4 Quattro 3.0T Audi B8 S4 All 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi B8 S5 All 3.0T Cabriolet Audi B8 S5 All 3.0T Coupe Audi B8 S5 All V8 4.2L Audi C7 A6 Quattro 3.0 TDI Audi C7 A6 Quattro 2.0T Audi Q5 Quattro 3.0 TDI Audi Q5 Quattro 3.0T Audi Q5 All 3.0T Audi Q5 Quattro 3.2L Porsche Macan Base L4 2.0L *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B8 A4 & S4. The spoiler is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  *For B8 chassis vehicles with an integrated trunk spoiler. Fits all B8/B8.5 S4. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. Cross Reference Spoiler This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Rear Diffuser. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of the Facelift B8 A4 & S4. The diffuser is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.   To compliment the look of your new diffuser, check out the ECS Carbon Fiber Trunk Spoiler and Side Blades, only available from ECS Tuning. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Rear Diffuser. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of the Pre-Facelift B8 A4 & S4. The diffuser is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.   To compliment the look of your new diffuser, check out the ECS Carbon Fiber Trunk Spoiler and Side Blades, only available from ECS Tuning. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less