Performance - Audi RSQ3 F3 (2018-Present)

ADJUSTABLE REAR DROPLINKS. RACE-PROVEN FOR YOUR ROAD CAR. The RacingLine Adjustable Rear Droplinks are an essential upgrade to any lowered or performance car WHAT THEY DO. Our Rear Sway Bar End Links replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminium billet replacements.Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar. Each heavy-duty, high-articulation rear droplink attaches the rear anti roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminium links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar. As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage cars. Fully adjustable by +/- 5mm to zero the pre-load on the anti-roll bar geometry. Clever design means that adjustment can be carried out at both ends whilst the droplinks are in-situ, making neutral positioning much easier.  Direct replacement – can be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time. ADJUSTABLE When you lower ride height, the geometry will now be adding preload to your anti roll bar. It's vital to adjust this back to neutral with the +/- 5mm adjustment built-in. PRECISE Solid, motorsport-spec ball joint ends mean much more direct response when turning in to corners. Increase durometer rubber bushing creates direct response for anti-roll bar under cornering conditions RACE-PROVEN Developed for our race cars - adjusting out the sway bar preload allows the anti roll bar to work within its correct operating envelope is an essential part of geometry set-up. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Motorsport-specification ball joint ends - high strength teflon-lined steel +/- 5mm of adjustable length with stainless steel insert to zero Anti Roll Bar preload  Increase durometer rubber bush to create direct response for anti-roll bar under cornering conditions Rubber dust boots fitted to protect the joints  Left / Right threaded ends make for easy length adjustment in-situ without having to detach and re-attach Lightweight CNC-machined 6061-T6 Aluminum bodies with beautiful gloss black anodised coating CONFIRMED APPLICATIONS VWR520000 (supplied as a pair) > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+

Read more less

FULL ALIGNMENT. KEEP YOUR ALIGNMENT WHERE IT SHOULD BE. Our new MQB RacingLine Subframe Alignment Bolt Collar kit cuts out the huge factory tolerances for accurate alignment each time, every time. WHAT'S THE PROBLEM? The RacingLine Alignment Bolt Collar kit is a simple ‘why not’ upgrade to eliminate the challenges caused by large tolerances in the factory subframe mounts, both front and rear.   The OEM subframe design uses really oversized bolt holes – giving a wide range of adjustments to shuffle the whole subframe assembly back and forth, side to side.   Whilst that may be ideal for dealers & repairers to lazily mask other misalignments in the chassis, it means that there are also huge opportunities for inaccuracy every time your subframes are refitted, not to mention the risk of the car’s alignment creeping out of tolerance with hard driving over time. WHAT IT DOES. Our precision-engineered, push-in Bolt Collars centralise the subframes by cutting out the huge hole tolerances, so perfectly centring the bolt locations every time you refit. The result? With correct alignment, you’ll keep precise steering, sharper handling and braking responses every time. By ensuring complete accuracy every time you refit your subframes, you’ll save time and cost by ensuring consistent, hassle-free alignment each time, every time.  With no need for alignments after refitting subframes in future, this really affordable upgrade will likely pay for itself many times over. No additional NVH transfer into the car and no more creaking mounts. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Full kit of 16x Bolt Collars for front and rear subframes High quality T6061 billet aluminium construction CNC construction, anodised gloss black to last Precision machining means tighter alignment specs  Simple, quick push-in fitment into OEM subframes No modification to subframe or car body is required, so fitment is completely reversible. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq vRS 2018+

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed!These CNC machined precision alloy wheel spacers are 8 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub. These spacers are suitable for most vehicles produced by Volkswagen Group. A 8mm spacer will give an overall track increase of 16mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not suppliedPlease note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are 13 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub. These spacers are suitable for most vehicles produced by Volkswagen Group. A 13mm spacer will give an overall track increase of 26mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   In The Box:2 x FMWS13 13mm Wheel Spacer1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Lower Motor MountTwin Dogbone Inserts.MQB/MQB Evo models. Get your power to the road or track where you need it!   The Twin Dogbone Inserts fill the large voids in the factory lower engine mount with two billet inserts, limiting drivetrain movement for greatly improved strength and a much more enjoyable drive. What do they do? The RacingLine upper and lower Twin Dogbone Mount Insert is one of the most affordable and transformative upgrades you can do to your MQB/MQB Evo car.    By slipping the RacingLine Twin Dogbone Insert into the voids of your factory lower engine mount you will stiffen the whole location of the drivetrain greatly to give a much tighter, sharper, more responsive feeling to your car.    Crucially, fitting both the two-piece upper and lower inserts of the RacingLine Twin Dogbone Insert eliminates the bending forces that can cause damage and ultimately failure if just one insert is fitted (as many others offer).  The RacingLine Twin Dogbone Insert limits the compliance of the lower engine mount by filling the large voids with our two billet inserts. All of the forwards/backwards rocking movement in your drivetrain is controlled by this Lower Mount – fitment of the RacingLine Twin Dogbone Insert adds strength to the drivetrain, helping to protect from future wear and breakages. The risk of wheel-hop under hard acceleration is almost eliminated as the whole engine and 'box assembly is firmly prevented from juddering when wheelspin occurs and through aggressive gearchages. Fitment of the Twin Inserts will only add a minimal increase NVH to the car’s characteristics, but most keen drivers love the sense that they are more 'connected' to their car, and the gentle 'growl' that the mount conveys.  Transformed Drive Transform the drive through eliminating wheel-hop off the line and through aggressive gearchanges - especially valuable on FWD cars. Durability guaranteed Unlike polyurethane or steel insert options on the market, this billet aluminum part will not deform and wear over time, and guarantees long-lasting performance. Twin Protection The Twin Dogbone Insert uses not one but two precision machined billet inserts to avoid the damaging bending moment that comes from fitment of a single insert. Added Strength Machined from billets of T6061 Aluminium, the Twin Dogbone Insert is more than strong enough to keep the drivetrain properly located on high power, hard driven cars. Twin Inserts.Working together. Upper Insert: slides into the voids along the rear side of mount. Lower Insert: inserts into the voids from underneath.  Confirmed Applications. MQB & MQB 'evo' 2.0 TSI, 1.8 TSI, 2.5 TFSI, 2.0 TDI MODELS VWR150003/4 see below to identify which type > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq vRS 2018+   Select yourcorrect version. The factory mount comes in two version across MQB models. To ensure fitment on your vehicle, please visually verify the mount you have, then select the correct insert below:  OE part: 5Q0 198 037 A – You’ll require the Version 1 Insert OE part: 5Q0 198 037 F – You’ll require the Version 2 Insert We recommend a visual check to make certain you have the right version:   Precision Engineered forPerfect Performance. Each Twin Dogbone Insert start life as a billet of T6061 Aluminium, before being precision CNC-machined into shape Carefully developed for minimal transference of NVH through to the cabin RacingLine’s trademark black anodised finish for durability over many years Engineered to slip easily into the voids In factory lower mount Easy, straightforward installation designed to be fitted without subframe removal takes minutes  

Read more less

TRACKSPORT COILOVER KITFOR MQB, MQB EVO & A5 PLATFORM CARS Simply the ultimate. Bringing all of our motorsport track experience to your car's performance with the RacingLine Tracksport Coilovers. WHAT'S SO SPECIAL? The VWR TrackSport kit has been developed directly from our full race kits; the only differences are in the internal valving settings and the spring rate/lengths that are supplied.  The kit really is that special. Coilover rear dampers, plus 45mm inverted ‘thick-stem’ front damper providing a super stiff front McPherson strut, unique in the market. Easy set up: 12-point adjustment of bump and rebound damping, adjustable with no tools or jacking via the beautifully over-engineered adjuster knobs. Includes Adjustable Top Mounts, 60mm ID linear rate springs, CNC Machined and pre installed pillow ball bearing, for super accurate camber set up. INVERTED FRONT  The TrackSport kit uses inverted ‘thick-stem’ front dampers, giving a much stiffer strut to avoid flex under intense load. ADJUSTABLE DROP LINKS When you lower your car, the VWR Adjustable Drop Links should be paired with Tracksport to readjust the preload on your anti roll bar and add precision to handling response.   COILOVER REAR Rear dampers are now coilover, allowing a full range of spring travel at the rear, rather than relying on shorter springs (as non-coilover rear kits do). LINEAR SPRINGS Supplied with 60mm id linear springs (with helper springs on front); in standard sizes to make them easily swapped for different rates for full set-up options. LIGHTWEIGHT Lightweight, shortened aluminium bodies, exactly as our race kits use for a really significant weight saving. ADJUSTABLE TOP MOUNTS Adjustable Top Mounts are included, allowing camber adjustment and a transformation in precision. Please note: for full adjustment the front suspension strut-top domes must be cut off. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Lightweight, shortened aluminium bodies, exactly as our race kits use for a really significant weight saving. Inverted ‘thick-stem’ front dampers with 45mm ultra-rigid shaft Motorsport-style Monotube construction suspension system for optimum wheel-control. 60mm id linear springs with helper springs on front; standard sizes for easy swap for different rates. 12-point adjustment of bump and rebound rates. Adjusted with no tools, and with no need to jack your car up. CONFIRMED APPLICATIONS MQB & MQB 'EVO' VWR340000-G7 > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ A5 PLATFORM VWR340000-G6 > VW Golf 5 GTI 2005-2008 > VW Golf 5 R32 2005-2008 > VW Golf 5 GTI ED30/Pirelli 2006-2007 > VW Golf 6 GTI 2009-2014 > VW Golf 6 R 2009-2014 > VW Scirocco R 2009-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > SEAT Leon II Cupra/R 1P 2006-2012 > SEAT Leon II 1P 2005-2012 > Skoda Octavia II vRS 1Z 2004-2013

Read more less

Racingline Wheel Stud & Nut Kit - M14x1.50Remove and install your wheels at the track all the time? Then you’ll know how frustrating the factory wheel bolts can be. Lining up the bolt holes, bashing the wheel against your beautiful brakes calipers, then cross-threading the bolts at the same time. All while balancing the weight of the wheel. Our Stud & Nut kit gives a stronger fixing method than using the original wheel bolts. Plus they’re a much quicker method to swap wheels for motorsport / track use as well. Converting your car to our Stud & Nut Kit is a simple, reversible upgrade that will speed up your wheel changes. Our Stud & Nut Kit also allow for the safe use of different spacer size setups without the risk of running out of bolt threads. Beautiful midnight-black gloss anodised finish on the nuts will smarten up your car’s looks as well as its practicality. Both conical and ball seat lug nuts are available to suit either factory or aftermarket wheels. Which Stud Lengths do I need?- If your vehicle is No wheel spacers, or wheel spacers upto 10mm in width, You need the 70mm Studs- If your vehicle has 11-20mm Wheel Spacers installed, You need the 80mm Studs.Stronger FixingM14 x 1.5 High Tensile Steel Motorsport Studs and larger anodised Wheel Nuts exceed the strength of the factory bolts for ultimate strength and safety. Quick Wheel ChangesStud and Nut kits are suited to any car that sees track use with regular wheel swaps. The studs really help to speed things up when you are trackside. Easy InstallationThese studs screw in place of your original wheel bolts with allen drive inserts to make installation a breeze. Plus easily removed in future. Precision engineered; for perfect performance!M14 x 1.5 heat treated high carbon steel stud with chrome plated finishLightweight M14 x 1.5 7000-series aluminium open-ended nuts with gloss anodised nutsInternal 6mm allen stud drive for accurate fixationsKnurled outer collar for much easier finger grip8mm of unthreaded stud shank for brake disc clearanceOversize 19mm nuts – greater surface area for contact & ease of use IMPORTANT NOTES: - Max Vehicle Weight 2500KG- This is not a 'Locking' or Security solution

Read more less

Racingline MQB Propshaft Bearing Alignment Kit Our new MQB RacingLine Propshaft Bearing Alignment kit cuts out the factory tolerances to maintain accurate propshaft alignment every time, all of the time. Our precision-engineered, Propshaft Bearing Alignment Kit centralises the factory centre support bearing carrier by cutting out the enlarged factory hole tolerances. Meaning your propshaft is held in perfect true orientation at all times. The oversize holes on the factory brackets are designed to allow several degrees of ‘twist’ on the centre bearing carrier, causing unnecessary long-term stresses on the prop, bushes and bearings. That may be great to help the factory with quick production-line assembly, but will lead to accelerated wear on the bush and rubber housing from misalignment. Every hard launch & shift provokes movement in the drivetrain – over time this risks shifting the factory prop mount out of alignment. This simple alignment kit reduces the bolt hole size down from M14 to M8, allowing no further twist from the brackets and ensuring that your prop cannot move from this position. Fit this Propshaft Bearing Alignment Kit once, then forget it. Drive your car safe in the knowledge that your propshaft will remain in the correct alignment forever more and prolong the life of the bearings and bushings. Prior to our development, we were amazed how many cars were out of alignment from factory! Confirmed Applications For all MQB & MQB Evo AWD modelsVWR810009 VW Golf 8 R 2020+VW Golf 7 & 7.5 R 2013-2020VW Passat 2.0 BiTDI 4Motion B8 2015+VW Arteon 2.0 BiTDI 4Motion 2017+VW Arteon R 2.0 TSI 320ps 2020+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 BiTDI 2016+ Audi S3 8Y 2020+Audi S3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon III Cupra ST 4Drive 5F 2017-2020SEAT Tarraco 2.0 TSI 190ps 2018+Cupra Ateca 2018+Cupra Formentor 310PS 2020+ Skoda Superb III 2.0 TDI 3V 2015-2020Skoda Kodiaq vRS 2018+

Read more less

Racingline Front Subframe Brace for MQB/MQB EVO MQB & MQB ‘evo’ cars rely on either a thin stamped-steel or cast alloy OE front subframe. This subframe has to channel all of the immense forces generating by hard driving. ​RacingLine’s bolt-in Front Subframe Brace provides much needed support and rigidity to aid accurate handling dynamics. Not surprisingly, with all of these forces combining in your subframe, significant deflection results, which affects wheel alignment and harms the precision in your steering as it flexes. RacingLine’s Billet Front Subframe Brace stiffens up the rear of the subframe with an intricately machined aluminium replacement, greatly improving stiffness under load. Despite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. This is a highly recommended upgrade to protect and enhance your car – whether it’s hard-driven, high-power or used on track. Confirmed Applications For all MQB & MQB EVO AWD ModelsVWR810006 VW Golf 8 GTI 2020+VW Golf 8 GTI Clubsport 2020+VW Golf 8 R 2020+VW Golf 7 & 7.5 GTI & Clubsport 2013-2020VW Golf 7 & 7.5 R 2013-2020VW Golf 7 & 7.5 2013-2020VW Passat 2.0 TSI B8 2015+VW Arteon 2.0 TSI 2017+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 TSI 2016+VW Jetta VII GLI 2018+ Audi S3 8Y 2020+Audi A3 8Y 2020+Audi S3 8V 2013-2020Audi A3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon IV FW 2020+SEAT Leon III Cupra 5F 2014-2020SEAT Tarraco 2.0 TSI 2018+SEAT Leon III 5F 2015-2020 Cupra Leon IV FW 2020+Cupra Ateca 2018+Cupra Formentor 2020+ Skoda Octavia IV vRS NX 2020+Skoda Octavia IV NX 2020+Skoda Octavia III vRS 5E 2014-2020Skoda Superb III 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR810006

Read more less

ADJUSTABLEDROP LINKS. RACE-PROVEN FOR YOUR ROAD CAR. The RacingLine Adjustable Droplinks are an essential upgrade to any lowered or performance car. WHAT THEY DO. If you’ve lowered your car, our Adjustable Drop Links are an essential upgrade to zero the pre-load on your anti-roll bar geometry, plus add stiffness and precision by replacing the stock rubber joints with ball joints.  The drop link attaches the front anti roll bar ends to the front damper.  The OEM links were made the length they are for a reason - to compliment the standard ride height.  But when you lower ride height, the car will now be pulling your anti roll bar ends up, pushing it out of its operating window, and forcing the link to sit at a sharper angle. Solid, motorsport-spec ball joint ends mean much more direct response when turning in to corners. These links were developed for our race cars to allow the anti roll bar to work the way it should. Adjusting the height of droplinks to the equivalent of the lowering amount is a must. Available in two lengths: 250mm for almost all applications. Or, 200mm length for cars running our TrackSport suspension or any other coilover kit with adjustable sway-bar perch. ADJUSTABLE 30mm of adjustable length to zero preload on the Anti Roll Bar. Choice of two lengths to suit different ride heights. ​ ​ PRECISE By replacing the soft rubber bushing in the factory links with motorsport-spec ball joints, cornering and steering responses are sharpened. RACE-PROVEN Developed for our race cars, yet no compromise for road cars. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. 30mm of adjustable length to zero the preload on the Anti Roll Bar Lightweight CNC-machined 6061-T2 Aluminum bodies with beautiful gloss black anodised coating Left / Right threaded ends make for easy length adjustment Motorsport-specification ball joint ends - high strength teflon-lined steel Rubber dust boots fitted to protect the joints  CONFIRMED APPLICATIONS VWR420000250mm length -All applications VWR420001200mm length - Coilover set-ups with adjustable roll-bar drop link mounts > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi TT II 8J 2006-2014 > Audi TTRS II 8J 2009-2014 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Leon II 1P 2005-2012 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Octavia II 1Z 2004-2013 > Skoda Superb III 3V 2015+

Read more less

REAR LOWER ARM OUTER BUSH PFR85-817   OEM Part Number: 1K0505553A / 1K0 505 553 A OEM Part Number: 5Q0505553 / 5Q0 505 553 OEM Part Number: 5QD505553 / 5QD 505 553 --- REAR LOWER ARM OUTER BUSH PFR85-817   OEM Part Number: 1K0505553A / 1K0 505 553 A OEM Part Number: 5Q0505553 / 5Q0 505 553 OEM Part Number: 5QD505553 / 5QD 505 553 --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Volkswagen Beetle A5 Multi-Link (2011 - ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B8 (2013 on), Audi Q2 4WD Quattro MULTI LINK, Audi RSQ3 F3, Seat Tarraco (2018-),  Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Audi TT / TTRS Mk3 FV/8S (2014 on)  

Read more less

REAR TRAILING ARM BUSH PFR85-816   OEM Part Number: 5Q0505541A --- REAR TRAILING ARM BUSH PFR85-816BLK   OEM Part Number: 5Q0505541A. --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3, Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Volkswagen T-Roc 4-Motion inc R, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Audi TT / TTRS Mk3 FV/8S (2014 on)

Read more less

REAR LOWER TRACK ROD INNER BUSH PFR85-812   OEM Part Number: Arm = 5Q0501529C / 5Q0 501 529 C --- REAR LOWER TRACK ROD INNER BUSH PFR85-812BLK   OEM Part Number: Arm = 5Q0501529C / 5Q0 501 529 C --- fits: Audi S1 8X (2015 on), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Ateca Multi-Link (2016-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B8 (2013 on), Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3, Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Arteon (2017 on)

Read more less

REAR UPPER WISHBONE INNER BUSH PFR85-514   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- REAR UPPER WISHBONE INNER BUSH PFR85-514BLK   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- fits: Audi A1 Quattro (2013), Audi S1 8X (2015 on), Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U,  Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

REAR UPPER WISHBONE OUTER BUSH PFR85-513   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- REAR UPPER WISHBONE OUTER BUSH PFR85-513BLK   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- fits: Audi A1 Quattro (2013), Audi S1 8X (2015 on), Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U,  Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

PFF85-833 PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - FAST ROAD/TRACK PFF85-833P PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - TRACK/MSPORT PFF85-833BLK PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on) Diagram reference 30

Read more less

LOWER ENGINE MOUNT (LARGE) INSERT DIESEL PFF85-832R Some NVH transmission should be expected when fitting this part to a Diesel vehicle. OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- LOWER ENGINE MOUNT (LARGE) INSERT PFF85-832   OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- LOWER ENGINE MOUNT (LARGE) INSERT TRACK USE PFF85-832P Made in Purple 80A and suitable for higher powered cars and track cars, this part helps to further reduce engine movement over fitting the standard PFF85-832 insert. Increased NVH may be felt when fitted. OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- LOWER ENGINE MOUNT (LARGE) INSERT PFF85-832BLK   OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on)                    

Read more less

FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - ROAD PFF85-831 PFF85-831 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037A / 5Q0 198 037 A OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - FAST ROAD/TRACK PFF85-831P PFF85-831P replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. This part is made in our Purple Shore A 80 for vehicles running increased power or that see occasional track use. OEM Part Number: 5Q0198037A / 5Q0 198 037 A OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - TRACK/MSPORT PFF85-831BLK PFF85-831 replaces the lower half of the original bush OEM part number 5Q0 198 037 / 5Q0198 037 A and includes an insert to fit into and fill the voids in the upper bush. This unique bush has been designed to be fitted without subframe removal from the vehicle and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037A / 5Q0 198 037 A OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- fits: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3, Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on)

Read more less

LOWER ENGINE MOUNT INSERT (LARGE) DIESEL PFF85-830R Suitable for diesel models, using a softer material that helps reduce movement from the bush but transmits less noise and vibration over fitting the standard PFF85-830 insert. OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) PFF85-830   OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) TRACK USE PFF85-830P Suitable for higher powered cars and track cars, using a stiffer material which helps further reduce engine movement over fitting the standard PFF85-830 insert, being a stiffer material additional noise and vibration may be felt. OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) PFF85-830BLK   OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on) Diagram reference 30

Read more less

FRONT WISHBONE FRONT BUSH PFF85-501 For a camber adjustable bush use PFF85-501G. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH PFF85-501BLK   OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH CAMBER ADJUSTABLE PFF85-501G This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH CAMBER ADJUSTABLE PFF85-501GBLK This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FITS: Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Beetle A5 Rear Beam (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010), Volkswagen Caddy Mk3.5 Typ 2K (06/2010 - 2020), Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK6 A6 Rear Beam (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink,  Seat Leon KL Rear Beam, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U, Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

DIAGRAM REFERENCE: 21PRODUCT NOTES: PFF3-1325 Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference.BUSH SIZE IF APPLICABLE:NUMBER OF BUSHES IN PACK:1REPLACES OEM BUSH PART NUMBERS:5Q0199855J/5Q0199855Q/5Q0199855PRoad SeriesFor Road and fast Road usePOWERFLEX Road Series bushes improve your cars road holding and chassis performance by controlling the amount of unwanted flex in the suspension. They offer Prolonged tyre life, Improved performance, Increased safety, Greater cost-effectiveness.   Shop By Car/Volkswagen/Passat B8 Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Audi/S3 (8V)/Bushes by Powerflex Shop By Car/SEAT/Ateca Shop By Car/Audi/Q2 Shop By Car/Volkswagen/Golf Mk7/Bushes by Powerflex Shop By Car/SEAT/Tarraco Shop By Car/Skoda/Karoq Shop By Car/Skoda/Kodiaq Shop By Car/Volkswagen/T-Roc Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes by Powerflex Shop By Car/Skoda/Superb (3V 2015-) Shop By Car/Audi/A3 (8V 12-20)/Bushes by Powerflex Shop By Car/Audi/TT Mk3 (8S)/Bushes by Powerflex Shop By Car/SEAT/Leon Mk3 (5F)/Bushes by Powerflex Shop By Car/Volkswagen/Touran (Mk2 15-) Shop By Car/Audi/Q3 (Mk2 18-) Shop By Car/SEAT/Leon Mk4 Shop By Car/Skoda/Octavia Mk4 Shop By Car/Audi/RSQ3  

Read more less