Performance - Audi S1 8X (2010-2018)

BREATHE FREE. LET YOUR ENGINE BREATHE. Take your RacingLine Intake to the next level with our Intake Upgrade Kit. For Audi S1, Polo GTI 1.8 and Ibiza Cupra 1.8. ​ NOTE: right hand drive cars only WHAT'S SO SPECIAL? One of our most popular products is the Cold-Air Intake System kit for Audi S1, the latest 6C Polo GTI 1.8 and Ibiza Cupra 1.8. ​ This Intake Upgrade Kit adds to your intake and takes things to the next level, ready to support higher power outputs and even turbo upgrades. The Intake Upgrade Kit comprises a new high-flow Turbo Inlet Hose plus Turbo 90 Inlet. Together these upgrades allow greatly increased airflow from your Intake into the turbocharger for lightning fast turbo response and higher power gains than the intake alone. The Upgrade Kit replaces the silicone Inlet Hose that was supplied with your intake - you won't need that any more. Put simply, you'll be wasting a chunk of the hard-gotten gains from your high-flow intake system without the Intake Upgrade Kit! COMPATIBILITY Works in conjunction with the RacingLine Intake, plus either the IS12, IS20 or IS38 turbos, ready for any future upgrades you make POWER GAINS Replacing the standard plastic pipe and elbow's highly restrictive airflow path through to the turbo gives a worthwhile power gain through smoothing and opening up that turn into the turbo SIMPLE FIT Fitting is very straightforward. The kit is installed in around 15 minutes using just hand tools.   And easily returned to standard, should you ever wish. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Reinforced high quality silicone to prevent deformation under boost pressure or heat Maximum diameter ultra smooth, high-gloss silicone with smooth transitions promotes airflow Formed silicon internal lip on the joins ensures smooth airflow transition Twin nitrile O-rings for the perfect seal into the turbo Maximum diameter ultra-thin wall T6-6061 aluminium with smoothed internal bore for optimised airflow CONFIRMED APPLICATIONSNOTE: the Intake Upgrade Kit currently only fits RIGHT HAND DRIVE cars. A kit for LHD cars is coming soon. ​ Some customers have fitted this kit to LHD cars, but it requires minor modification to the Turbo 90 Inlet.  ​ Audi S1 2.0 TFSI 2015-2018 Volkswagen Polo GTI 1.8 2017-2018 6CSeat Ibiza Cupra 1.8 2017-2018 6J ​ * MUST HAVE RACINGLINE INTAKE KIT FITTED

Read more less

A set of four silicone boost hoses for the Audi S1. Forge Motorsport design these hoses so they can withstand pressures that can be experienced on tuned and re-chipped engines. They will long outlast the original hoses and with our limited lifetime warranty on all Forge products, you can be sure these hoses won't let you down. This set of hoses are available in red, blue or black meaning you can find the perfect colour to match your car. Simply select your choice using the options above.  The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This reinforced silicone intake hose fits the 2 litre turbo Mk7 Golf, Seat Leon Cupra 280R and Audi S3 2.0l TSI (8V Chassis). Due to its location it really improves the looks of the engine compartment and removes any restriction of the OEM plastic hard pipe.  These are available in red, blue or black. Please select your choice in the options above when ordering. This part is also compatible with our turbo inlet adapter, FMTIA1 The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* The hose has an inner diameter of 70mm and 80mm  *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

REVO CONE CONE AIR INTAKE SYSTEM AUDI S1 2.0 TFSI The Revo open cone Air Intake System for the Audi S1 improves performance and offers an aggressive intake sound. Ensuring your engine can get access to enough air is paramount when increasing power; more air means more power throughout the rev-range. Only Revo Air Intake Systems are specifically designed to work in harmony with your vehicle and Revo Software. Engineered to directly replace the stock airbox, pipework and filter on the Audi S1. The Revo System offers a high-quality open cone replacement complete with a heat shield to improve airflow and the performance of your vehicle. KEY FEATURES Increased performance +13HP at hubs & +18NM Torque Improves Air Flow Efficiency 53% Larger Hose & Inlet Volume Three Stage Foam Filter with Mesh Silicone Coolant Hose OEM VS REVO When you begin to enhance performance, the restrictive OEM intake struggles to flow enough air, robbing the engine of power. The Revo Air Intake System removes these restrictive elements promoting smoother airflow. Open Cone systems replace the OEM air box to make space for the heat shield, filter and silicone hose which joins directly to the turbo inlet. Revo Flush Fit joins eliminate unwanted turbulence and increase the rate at which air can flow, ensuring maximum performance at all tuning stages. SILICONE HOSE The Revo silicone hose is designed to directly replace the plastic hose and rubber corrugated parts. Increased inlet diameter of 21% reduces restriction and promotes smooth airflow while an integrated wire helix reinforces the hose and prevents collapsing under negative pressure.   MACHINED INLET The machined inlet replaces the restrictive OEM plastic elbow and is designed to securely fit the OE unit using locking tabs and integrated O-rings. Only the Revo intake kit features an inlet almost double the cross-sectional area. This means air can stabilise and distribute before a smooth tapered transition to the turbo.   FILTER AND HEATSHIELD Ensuring the engine has access to cold air is vital for performance. The Revo heat shield channels cold air from the front intake duct while partitioning the filter from the heat of the engine bay. The Revo Heatshield uses the stock mounting points and rubber mounting bushings to provide an easy and secure installation.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house and are rigorously tested utilising an in-house 3D printer, latest CAD and CFD programs, hub dyno and Revo data acquisition software. The Revo intake allows the turbo to run more efficiently, intake a larger volume of air and minimise turbulence to increase both power and torque, as highlighted during controlled Dyno testing. AIRFLOW  An overall air volume increase of 50% over the OE part allows for faster and increased airflow. The carefully designed silicone hose has its own support bracket mated to a machined hose fitting, maintaining the correct position during engine movement. A constant taper in the hose ensures a smooth transition of airflow from the air filter to turbo and results in an increase in air volume over the stock part. Further helped by the machined inlet that matches the turbo inlet for the ultimate in airflow characteristics.   DYNO GRAPH Testing was carried out on an Audi S1 2.0 TFSI (6 Speed manual) with Revo Stage 1 Software fitted with the OEM system and then the Revo Air Intake System. With a consistent gain throughout the rev range, the Revo intake offered a peak gain of 12HP at the hubs over the stock part. A maximum increase in airflow of up to +16 kg/hr gives impressive gains of 13HP @5100rpm and 18NM @5100RPM over using the stock intake system.   FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi S1 2.0 2014>  

Read more less