Performance - Audi TT MK2 8J (2006-2014)

RTS has developed the ultimate SMF conversion kit & flywheel specifically for the TFSI engine. RTS unique “Twin Friction” (drive plate) has been developed using a unique flywheel side friction material whilst adopting a segmented pressure plate face. The aramid friction exhibits 50% less wear than a conventional drive plate friction material.This material also reduces the effects of fade. Fade is the decline in the clutch system’s ability to transmit torque as operating temperatures increases. These features in combination with the previously mentioned micro-structure of spheroidal casting and ER2 technology allows the clutch kit to dissipate heat far more effectively, allowing the clutch to run cooler for longer. RTS kit has been designed with a higher clamp load enabling the clutch system to transmit 60% more torque over the standard clutch kit and is suitable for every day driving, fast road and track/circuit racing whilst maintaining user-friendly driving experience. RTS Twin Friction kit has been designed with a higher clamp load allowing. RTSTF-5389SMF (Twin friction) has been designed and manufactured to significantly exceed the original clutch system whilst also maintaining OE pedal effort, thus delivering a torque capacity of 440 lbs/ft of torque.RTSPC-5389SMF (5 paddle) has been designed and manufactured to significantly exceed the original clutch system whilst also maintaining OE pedal. effort, thus delivering a torque capacity of 480 lbs/ft of torque. Suitable for the following EA113 ‘T-FSI’ 6 Speed Manual Cars Audi A3 (8P) Audi S3 (8P) Audi TT (8J) Audi TTS (8J) SEAT Leon FR (Mk2) SEAT Leon Cupra R (Mk2) Volkswagen EOS Volkswagen Golf GTI (Mk5) Volkswagen Golf GTI (Mk6) Volkswagen Golf R (Mk6) Volkswagen Jetta (Mk5) Volkswagen Scirocco Volkswagen Scirocco ‘R’

Read more less

RTS unique “Twin Friction” (drive plate) has been developed using a unique flywheel side friction material whilst adopting a segmented pressure plate face. The aramid friction exhibits 50% less wear than a conventional drive plate friction material.This material also reduces the effects of fade. Fade is the decline in the clutch system’s ability to transmit torque as operating temperatures increases. These features in combination with the previously mentioned micro-structure of spheroidal casting and ER2 technology allows the clutch kit to dissipate heat far more effectively, allowing the clutch to run cooler for longer. RTS kit has been designed with a higher clamp load enabling the clutch system to transmit 60% more torque over the standard clutch kit and is suitable for every day driving, fast road and track/circuit racing whilst maintaining user-friendly driving experience. RTS Twin Friction kit has been designed with a higher clamp load allowing. RTSTF-5389 (Twin friction) has been designed and manufactured to significantly exceed the original clutch system whilst also maintaining OE pedal effort, thus delivering a torque capacity of 440 lbs/ft of torque.RTSPC-5389 (5 paddle) has been designed and manufactured to significantly exceed the original clutch system whilst also maintaining OE pedal. effort, thus delivering a torque capacity of 480 lbs/ft of torque. Also available as an SMF Kit (including Flywheel) Suitable for the following EA113 ‘T-FSI’ 6 Speed Manual Cars Audi A3 (8P) Audi S3 (8P) Audi TT (8J) Audi TTS (8J) SEAT Leon Cupra R (Mk2) Volkswagen EOS Volkswagen Golf GTI (Mk5) Volkswagen Jetta (Mk5) Volkswagen Scirocco ‘R’

Read more less

RTS has developed the ultimate SMF conversion kit & flywheel specifically for the TSI engine. RTS unique “Twin Friction” (drive plate) has been developed using a unique flywheel side friction material whilst adopting a segmented pressure plate face. The aramid friction exhibits 50% less wear than a conventional drive plate friction material.This material also reduces the effects of fade. Fade is the decline in the clutch system’s ability to transmit torque as operating temperatures increases. These features in combination with the previously mentioned micro-structure of spheroidal casting and ER2 technology allows the clutch kit to dissipate heat far more effectively, allowing the clutch to run cooler for longer. RTS kit has been designed with a higher clamp load enabling the clutch system to transmit 60% more torque over the standard clutch kit and is suitable for every day driving, fast road and track/circuit racing whilst maintaining user-friendly driving experience. RTS Twin Friction kit has been designed with a higher clamp load allowing. RTSTF-0018SMF (Twin friction) has been designed and manufactured to significantly exceed the original clutch system whilst also maintaining OE pedal effort, thus delivering a torque capacity of 440 lbs/ft of torque. RTSPC-0018SMF (Paddle) has been designed and manufactured to significantly exceed the original clutch system whilst also maintaining OE pedal effort, thus delivering a torque capacity of 465 lbs/ft of torque. Suitable for the following ‘1.8 TSI’ 6 Speed Manual Cars Audi A3 (8P) Audi TT (8J) Seat Leon (MK2) Seat Leon (MK3) Skoda Octavia (MK2) Skoda Octavia (MK3) Skoda Superb Volkswagen Golf (MK6) Volkswagen Jetta Volkswagen Passat

Read more less

LuK Dual mass flywheel – LUK 415 0331 10   Diameter [mm]: 240 Manufacturer compare numbers: AUDI 06F 105 266 AD | 06F 105 266 AG | 06F 105 266 M SEAT 06F 105 266 AD | 06F 105 266 AG | 06F 105 266 M VOLKSWAGEN 06F 105 266 AD | 06F 105 266 AG | 06F 105 266 M   Dual-mass flywheel (DMF) LuK   Higher torque levels, greater ignition pressures, and stricter emissions controls are causing ever greater rotational irregularities in today’s engines, and thus higher levels of vibration in the powertrain. Higher demands on comfort and quiet as well as greater measures to protect the transmission all require extremely efficient torsional vibration dampers. Part Information Max. Clearance Angle [Degree]: 18Max. Sideplay [mm]: 2.9Number of mounting bores: 6Number of teeth (finding the max. clearance angle): 7Supplementary Article/Supplementary Info: without pilot bearingSupplementary Article/Supplementary Info 2: without friction control plate; without screw setVehicle Equipment: for vehicles with manual transmission Suitable for the following EA888 Gen 3 Manual Cars Volkswagen Golf GTI MK5 Volkswagen Golf GTI MK6 Volkswagen Scirocco Audi A3 (8p) Audi TT (8j) Seat Leon Cupra MK2

Read more less

RTS has developed the ultimate DMF conversion kit & flywheel specifically for the TDi engine. RTS unique “Twin Friction” (drive plate) has been developed using a unique flywheel side friction material whilst adopting a segmented pressure plate face. The aramid friction exhibits 50% less wear than a conventional drive plate friction material.This material also reduces the effects of fade. Fade is the decline in the clutch system’s ability to transmit torque as operating temperatures increases. These features in combination with the previously mentioned micro-structure of spheroidal casting and ER2 technology allows the clutch kit to dissipate heat far more effectively, allowing the clutch to run cooler for longer. RTS kit has been designed with a higher clamp load enabling the clutch system to transmit 60% more torque over the standard clutch kit and is suitable for every day driving, fast road and track/circuit racing whilst maintaining user-friendly driving experience. RTS Twin Friction kit has been designed with a higher clamp load allowing. RTSTF-5387SMF (Twin friction) has been designed and manufactured to significantly exceed the original clutch system whilst also maintaining OE pedal effort, thus delivering a torque capacity of 440 lbs/ft of torque.RTSPC-5387SMF (5 paddle) has been designed and manufactured to significantly exceed the original clutch system whilst also maintaining OE pedal. effort, thus delivering a torque capacity of 480 lbs/ft of torque. Suitable for the following VW 02Q 6 ‘TDi’ 6 Speed Manual Cars Audi A3 (8P) Audi TT (8J) SEAT Leon Volkswagen Golf (Mk5/6) Volkswagen Jetta (Mk5) Volkswagen Passat Skoda Octavia See full list with engine codes in the Vehicle Fitment tab.

Read more less

RTS has developed the ultimate DMF conversion kit & flywheel specifically for the TDi engine. RTS unique “Twin Friction” (drive plate) has been developed using a unique flywheel side friction material whilst adopting a segmented pressure plate face. The aramid friction exhibits 50% less wear than a conventional drive plate friction material.This material also reduces the effects of fade. Fade is the decline in the clutch system’s ability to transmit torque as operating temperatures increases. These features in combination with the previously mentioned micro-structure of spheroidal casting and ER2 technology allows the clutch kit to dissipate heat far more effectively, allowing the clutch to run cooler for longer. RTS kit has been designed with a higher clamp load enabling the clutch system to transmit 60% more torque over the standard clutch kit and is suitable for every day driving, fast road and track/circuit racing whilst maintaining user-friendly driving experience. RTS Twin Friction kit has been designed with a higher clamp load allowing. RTSTF-5386 (Twin friction) has been designed and manufactured to significantly exceed the original clutch system whilst also maintaining OE pedal effort, thus delivering a torque capacity of 440 lbs/ft of torque.RTSPC-5386(5 paddle) has been designed and manufactured to significantly exceed the original clutch system whilst also maintaining OE pedal. effort, thus delivering a torque capacity of 480 lbs/ft of torque. Suitable for the following VW 02Q 6 ‘TDi’ 6 Speed Manual Cars Audi A3 (8P) Audi TT (8J) SEAT Leon Volkswagen Golf (Mk5/6) Volkswagen Jetta (Mk5) Volkswagen Passat Skoda Octavia See full list with engine codes in the Vehicle Fitment tab.

Read more less