Performance - BMW 1 Series E81 / E82 / E87 / E88 (2004-2013)
Airtec AIRTEC MOTORSPORT MIL LIGHT CHEATER
AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.
£21.87
Airtec AIRTEC INTERCOOLER UPGRADE FOR BMW 1 & 3 SERIES – DIESEL MODELS (E-SERIES)
As part of our expanding BWM product range, AIRTEC Motorsport is proud to launch our 1 & 3-Series diesel intercooler upgrade suitable for track or fast road use. In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. The designOur solution to increasing the intercooler’s size and performance within the confines of the limited space behind the bumper is based upon a wider, taller core with a huge 150mm depth. This offers a massive 94% increase in overall capacity in comparison to the original intercooler, as well as a significant increase in frontal area over standard, which allows it to make the most of the air flow provided. Together with our high-flow, moulded one-piece cast end tanks to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. Available in a high-quality powder coated black finish, the comprehensive kit also comes complete with all fixtures and fittings, as well as detailed fitting instructions. Its proven cooling efficiency increase makes it an essential modification for modified 1 & 3-Series diesel models. DimensionsOEM intercooler AIRTEC Motorsport intercoolerWidth: 520mm Width: 550mmHeight: 100mm Height: 110mmDepth: 90mm Depth:150mmCapacity: 4.7 litres Capacity: 9.1 litresFront area: 5,200cm² Front area: 6,050cm² Inlet and outlets: 62mm FitmentThis intercooler is a replacement for BMW part number 17517524916 and is suited for all models with matching 62mm inlet and outlets. PLEASE NOTE: Later 120d and 320d models have 70mm inlet and outlets and requite this intercooler: AIRTEC Motorsport Front Mount Intercooler for BMW E9X 325D/330D (E-Series) – Auto Specialists If in doubt, please measure the inlet and outlet, or check the part number of your current intercooler by putting the VIN number of your car into BMW Parts Catalog (realoem.com) Fits the following E-Series models:1-Series:2003 to 2011 – 116d/118d2003 to 2007 – 120d 3-Series:2004 to 2011 – 316d/318d2004 to 2008 – 320d X1:2008 to 2015 – 16d/18d Features 94% increase in overall capacity in comparison to original AIRTEC logo cast end tanks for improved air flow and unbeatable strength Increase in frontal area over standard Huge increase in cooling ability Powder coated black finish Includes fittings and fixtures AIRTEC Logo at no extra cost Registered Design Right number: 6049893 AIRTEC Part No: ATINTBMW3
£455.75
Airtec AIRTEC INTERCOOLER UPGRADE FOR BMW 135I/335I/Z4 35I (N54)
AIRTEC intercooler for the E82 BMW 135i, E92 335i and E89 Z4 35i (N54) 60mm thick proven bar and plate core, spec’d to AIRTEC designs AIRTEC logo’d cast end tanks for improved airflow and unbeatable stength Dyno proven power gains Lower intake temps meaning a safer engine 3-year unlimited mileage warranty Available in either Natural Silver or Pro Series Black finishes AIRTEC logo available at no extra charge Unbeatable value for money! Test results Carried out at AmD Essex rolling road. Intercoolers being testing for ACT (Air Charge Temperature) Standard BMW Intercooler (Stage 1 remap). Average air temperature into intercooler: 115 degreesAverage air temp out of intercooler: 69 degrees With intake temps over 60 degrees it is likely that the engine will be pulling back the power AIRTEC Intercooler (Stage 1 remap) Average air temp into Intercooler. 84 degreesAverage air temp out of Intercooler. 36 degrees With lower intake temperatures our AIRTEC intercooler was seeing an increase in power of 17 bhp The increase in power proves just how important it is to have lower intake temperatures and why our AIRTEC intercooler is a must have for any remapped cars Registered Design Right number: 6023245 AIRTEC part no: ATINTBMW2
£601.68
Airtec AIRTEC MOTORSPORT UNIVERSAL OIL COOLER -8 OR -10 AN FITTINGS
AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings
£133.65