Performance - BMW 1 Series F40 (2019-2024)

AIRTEC front mount intercooler now available for the BMW M135i (F40). Available in motorsport finish silver and pro-series black for the ultimate stealth look. AIRTEC part no: ATINTBMW7 Bolt on BHP, by lowering the charge Air temperatures, a remapped car has increased power by ECU changes that raise boost pressure and other parameters, this increase in boost pressure raise intake temps and power loss soon follows, by fitting an up-rated intercooler you lower these intake temps, in turn increasing bhp and making your engine safer. Features: Race spec bar ‘n’ plate core for super-fast recovery times Super flow end tanks – thin wall cast alloy end tanks with no sharp corners that can slow air speed Bolt on design with no extra modding required AIRTEC’s 3 year unlimited mileage warranty CNC alloy pipe connections Approximate dimensions: Thickness 140mm wide stepped coreHeight 230mm (the 140mm thick core section is 180mm high)Width 810mm Available in Pro-Series black for the ultimate stealth look. AIRTEC part no: ATINTBMW7

Read more less

Add a bit of Bling to your smelly interior Official CEUK air freshener which can be hung from your mirror or indicator stalk  featuring the CEUK logo front and rear Bubble-gum flavour - these are the absolute bomb! Dipped instead of sprayed the smell lasts! 

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under full right and left wheel lock. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are available in 13mm, 16mm, and 20mm thickness with a 72.6mm bore and 5 x 120mm PCD stud bolt pattern. Machined in the UK and anodised black to inhibit corrosion and "bonding" to the wheel or hub and machined with an alloy spigot to allow centering on the hub (often called "hubcentric" spacers). These spacers are suitable for most BMW vehicles but please check the compatibility list or contact us to be sure. Please choose required size from the drop-down list. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   Please note that a small number of BMW’s have longer rear hubs. The maximum rear hub length the 13mm and 15mm wheel spacers will fit is 13mm. Please check before purchasing.   In the Box:2 x Wheel Spacer1 x Forge Sticker

Read more less

Product Description This Blow Off, or Dump valve, is for the BMW N20 2.0 Turbo engines that have the electronically controlled bypass valve. This engine can be found in the F10,F20 and F30 chassis badged as 125i,225i, 220i, 228i, 320i, 328i, 520i and 528i. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. FITS: 1 SeriesF20/F21/F40 3/5 Dr Hatchback 2012 Onwards2 SeriesF22/F23 2Dr Coupe/Convertible 2014 Onwards3 SeriesF30/F31 Saloon/Estate 2011-20195 Series520i528i

Read more less

Product Description This is a replacement carbon canister including Pipercross filter that fits the FMINDGOLR twintake and Fiat FMINDF500 These have been created exclusively for Forge by filtration gurus Pipercross, and feature the latest multilayer-foam technology that is proving to be so successful in this season’s British Touring Car Championship  (BTCC). These are priced individually. Please order 2 when replacing carbon canister/filters on the FMINDGOLR system. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.  

Read more less

This listing is for 1x 5L Barrel OR 1x 1L Bottle   A fully synthetic Triple Ester NANODRIVE Technology low friction formulation suitable for fast road/street modified engines, race, rally, sprints and hill climbs. Part of the Competition Fully Synthetic NT+ range of engine oils and incorporates Millers Oils second generation NANODRIVE low friction technology to achieve winning results for the professional race team. APPLICATION: Recommended for competition or modified engines where maximum power release is the preferred criteria. Formulated for high revving engines used in circuit racing or for larger engines for short duration i.e. hill climbs and sprints. USER BENEFITS: Fully synthetic Triple Ester NANODRIVE Technology oil provides: Significantly reduced friction (laboratory tests and results show up to 60% friction reduction plus a reduction in wear to a standard engine oil) Reduces component wear promoting longer engine life Reduced heat production Increased power output and torque Improved reliability Improved energy efficiency Superior anti-friction and anti-wear characteristics PERFORMANCE PROFILE: Manufactured to far exceed the requirements of API SM/CF and ACEA A3/B4 Suitable for operating at 125°C with peak temperatures up to 150°C

Read more less

PF5-4660 is a polyurethane jack pad to fit into the plastic lifting points found on most modern BMW and related vehicles and is designed to help lift stability and location, whilst protecting the underside of your vehicle.  OEM Part Number: 51717039760 / 51717123311 / 51718268885 OEM Part Number: 51717169981 Size 80mm Diameter Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price FITS: BMW E81, E82, E87 & E88 (2004 - 2013), BMW E82 1M Coupe (2010 - 2012), BMW F20, F21 RWD (2011 - 2019), BMW F20, F21 xDrive (2011 - 2019), BMW F40 (2018 - ), BMW F52 Sedan (2017 -), BMW F22, F23 (2013 on), BMW F22, F23 xDrive (2013 on), BMW F44 Gran Coupe (2019 on), BMW F45, F46 Active Tourer (2014 -), BMW F87 M2 Coupe (2015 on), BMW G42 (2022-ON), BMW G87 M2 (2023 on), BMW F07 GT (2009 - 2016), BMW E63/E64 (2003 - 2010), BMW E63/E64 M6 (2005 - 2011), BMW F06 6 Series Gran Coupe (2011 - ), BMW G32 Gran Turismo (2017 on), BMW E38 (1994 - 2002), BMW E65/E66/E67 (2001 - 2008), BMW F01, F02, F03, F04 (2007 - ), BMW G11 (2015 on), BMW F92 M8 (2019 on),  BMW G14/G15/G16 (2018 on), BMW i3 (2013 - ON), BMW i8 (2014 - ON), BMW E39 520 to 530, BMW E39 520 to 530 Touring, BMW E39 535 to 540, BMW E39 540 Touring, BMW E39 M5, BMW E46 Compact,  BMW E46 M3 inc CSL, BMW E46 Sedan / Touring / Coupe / Conv, BMW E46 Xi/XD (4wd), BMW E60 Saloon, BMW E60/E61 M5 (2005-2010), BMW E60/E61 xDrive, BMW E61 Touring, BMW E9* M3 inc GTS & Cab, BMW E9* Sedan / Touring / Coupe / Conv, BMW E9* xDrive, BMW Coupe / Convertible , BMW M6, BMW xDrive, BMW M5, BMW Saloon / Touring, BMW xDrive, BMW F3* Sedan / Touring / GT, BMW F3* Sedan / Touring xDrive, BMW F34 GT xDrive (2013 - 2020), BMW F80 M3, BMW F32, F33, F36 (2013 -), BMW F32, F33, F36 xDrive (2013 -), BMW F82, F83 M4 (2014 -), BMW G20, G21 (2018 - ), BMW G80 M3 (2020 on), BMW G22, G23 (2020 on), BMW G82, G83 M4 (2020 on), BMW F90 M5 (2017 on), BMW G30, G31 RWD (2016 on), BMW G30, G31 XDrive (2016 on), Mini F54 Clubman Gen 2 (2015 - ON), Mini F55 / F56 Gen 3 (2014 on), Mini F57 Cabriolet (2014 - on), Mini F60 Countryman Gen 2 (2017 - ON),  Mini R50/52/53 Gen 1 (2000 - 2006), Mini R55 Clubman Gen 1 (2007 - 2014), Mini R56/57 Gen 2 (2006 - 2013), Mini R58 Coupe (2011 - 2015), Mini R59 Roadster (2012 - 2015), Rolls-Royce Cullinan RR31 (2017 - ON), Rolls-Royce Dawn RR6 (2015 - 2018), Rolls-Royce Ghost RR4 (2008 - 2018 ), Rolls-Royce Phantom RR1 (2003 - 2017), Rolls-Royce Phantom RR11/RR12 (2017 on), Rolls-Royce Wraith RR5 (2012 - 2018 ), Toyota Supra Mk5 A90/J29 (2019 -), BMW X1 E84 sDrive (2008-2015), BMW X1 E84 xDrive (2008-2015), BMW X1 F48, F49 (2016 - ON), BMW X2 F39 (2017 - ON), BMW iX3 G08 (2020 on), BMW X3 E83 (2003-2010), BMW X3 F25 (2009-2017), BMW X3 G01 (2017 on), BMW X3 M F97 (2019 on), BMW X4 F26 (2013-2018), BMW X4 G02 (2018 on), BMW X4 M F98 (2019 on), BMW X5 E53 (1999-2006), BMW X5 E70 (2006-2013), BMW X5 F15 (2013-), BMW X5 G05 (2018 on), BMW X5 M F85 (2013-2018), BMW X5 M F95 (2020 on), BMW X6 E71 (2007-2014), BMW X6 E72 ActiveHybrid (2008 - 2011), BMW X6 F16 (2015 - ON), BMW X6 G06 (2019 on), BMW X6 M F86 (2014-2019), BMW X6 M F96 (2020 on), BMW X7 G07 (2018 on), BMW Z8 E52 (1998-2003), BMW Z4 E85 & E86 (2003-2009), BMW Z4 E89 (2009 -) , BMW Z4 G29 (2018 on), BMW Z4M E85 & E86 (2006-2009), Zinoro M12 (2013 - 2015), Zinoro M13 60H/100H (2015 - 2019)      

Read more less

The original and still our most popular high performance brake fluid. Ate TYP200 (and its cousin Super Blue) offer extremely high boiling points in a full liter container at an attractive price. Even though it's rated as a DOT4 fluid, the boiling points of Ate Type 200 exceeds DOT5 specs. Ate brake fluid makes an excellent street/track dual purpose brake fluid.Ate TYP200 is an amber/gold colour to meet DOT regulations. It is identical in every way to Ate Super Blue, which was removed from shelves because the blue dye was not DOT compliant. PLEASE NOTE: We can only ship this product within Mainland UK. This item or subsequently any orders with this item on from outside mainland UK will be cancelled and refunded. 

Read more less

Racingline Racing Brake Fluid - 500 mlWhether you're running stock brakes for Fast Road, or a Big Brake Kit on the track, the new Racing Brake Fluid from Racingline is a fantastic upgrade to any braking system! * Compatible with all brake set ups - from standard factory brakes right up to our mighty Stage 3 Big Brake Kits on track* One of the highest specification brake fluids on the market* Suitable for any form of motorsport as well as day to day road use without compromise* Since our Racing Brake Fluid is significantly less expensive than buying new pads or a big brake kit, this is your ideal first braking modification* A Highly Refined Super-DOT4 fluid, giving significantly higher boiling point than regular DOT4 or DOT5.1* Racingline's Racing Brake Fluid has a Dry Boiling point of 312ºc, and a wet boiling point of 204ºc PLEASE NOTE: We can only ship this product within Mainland UK. This item or subsequently any orders with this item on from outside mainland UK will be cancelled and refunded. 

Read more less

Official Team Enhanced Sun Strip supplied as a 2 piece strip with a blank base strip and writing in a sticker overlay  Pick your theme and off you go. It is advisable to have the sunstrip fitted by a professional, We do not supply instructions or fitting guides - And any damage to the strip caused by poor application can not be covered by CEUK. Don't forget to check out the rear windscreen sticker Please note: all sunstrip are custom and made to order - please be advised that your sunstrip may not actually be dispatched for up to 48-72 working hours and this may cause a delay in received by our usual timescales 

Read more less

fits: BMW1 SeriesF20/F21/F40 3/5 Dr Hatchback 2012 OnwardsMiniThird generation (F54/F55/F56/F57)F54 Clubman 2015-2019F56/F55 Hatchback 2014-F57 Convertible 2016- This induction kit has been developed to fit Mini (Generation 3) vehicles fitted with a Bosch intake sensor part Number: 0 281 006 597.  Before purchasing this item please use the photo guide on this page to correctly identify the intake sensor fitted to your vehicle. Forge Motorsport have been at the forefront of Mini tuning since 2006, and proud sponsor of the Mini Challenge  in the UK which sees our performance parts fitted to both the R56 and F56 generations of Mini, across the entire grid. The intake itself features a bespoke aluminum heat shield, which doubles as a scoop to direct air from the cold air inlet on the slam panel, and it picks up on the stock mounting locations with rubber grommets to reduce vibration and noise. Take a look at our video to see the dyno test results and an impressive 10 BHP gain. The pipe to the filter is hand fabricated and features a precision machined MAF boss so that the cars original MAF can simply be bolted on to the new intake. The filter is manufactured to Forge’s specifications by Pipercross. Washable and reusable design. Layered multi-density foam technology. Designed and manufactured in Great Britain.  Improvement in engine power and torque with superior engine protection from dirt and dust ingress. Designed to flow stronger for longer. If you have the below sensor, this part will fit your vehicle. If you have the below sensor, this part will not fit your vehicle. Please purchase FMINDF56 Finally, the intake scoop and hard pipe are finished in hard-wearing crackle black powder coat to give an OEM style finish. Fitting is very straightforward, requires no cutting or modification to the vehicle so it can easily be removed if needs be, and can be completed in 20-30 minutes. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge Motorsport Boost Tap for the Mini F56 and F55.  The adaptor plate is installed between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge without having to cut into any original equipment.  Simple to fit using the existing MAP screw, hardware and fitting instructions which are supplied and the application is fully reversible.  OEM T-Map Sensor Part Number: 13628637899 FITS: BMW1 SeriesF20/F21/F40 3/5 Dr Hatchback 2012 Onwards118i M Sport 2020 Onwards 1.5 Turbo Petrol (B38)MiniF60 Countryman 2017-Cooper 1.5 Turbo Petrol (B38)Cooper S 2.0 Turbo Petrol (B48)One 1.5 Turbo Petrol (B38)Third generation (F54/F55/F56/F57)F54 Clubman 2015-2019Cooper 1.5 Turbo Petrol (B38)Cooper S 2.0 Turbo Petrol (B48)Cooper SD 2.0 Turbo Diesel (B47)JCW 2.0 Turbo Petrol (B48) One 1.5 Turbo Petrol (B38)F56/F55 Hatchback 2014-Cooper 1.5 Turbo Petrol (B38)Cooper D 1.5 Turbo Diesel (B37)Cooper S 2.0 Turbo Petrol (B48)Cooper SD 2.0 Turbo Diesel (B47)JCW 2.0 Turbo Petrol (B48 Up To 2021)One 1.5 Turbo Petrol (B38)  Cooper S 2.0 Turbo Petrol (B48)F57 Convertible 2016-Cooper 1.5 Turbo Petrol (B38)Cooper D 2.0 Turbo Diesel (B47)Cooper S 2.0 Turbo Petrol (B48)JCW 2.0 Turbo Petrol (B48 Up To 2021)One 1.5 Turbo Petrol (B38)   In The Box: x1 Forge Motorsport Mini F56 & F55 Boost Tap x1 M6x16 Cap Head Bolt x1 3 meter length of 4mm Vacuum Hose x10 Cable Ties x1 Forge Motorsport Sticker  x1 Set of installation instructions           Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

High flow foam construction with a foam top for increased surface area and an inner cage for support. Replaces the filter in the following kits - FMINDK26 FMINDF56 FMINDFPA         Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This adaptor plate is installed between the boost (MAP) sensor and its mounting Boss. This allows for a takeoff to run a vacuum operated valve or for connection to a boost gauge, without having to cut into any original equipment.  Vacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.   Compatible with the following BMW MAP sensors:  13627551429  13627585493  13627599042 FITS: 1 SeriesF20/F21/F40 3/5 Dr Hatchback 2012 Onwards114i 2012-2015 (N13)116i 2012-2015 (N13)116i 2015 Onwards (B38)118i 2012-2015 (N13)118i 2015 Onwards (B38)120i 2015-2016 (N13)120i 2016 Onwards (B48)125i 2012-2015 (N20)125i 2016 Onwards (B48)M135i 2012-2015 (N55)M135i 2015-2016 (N55)2 SeriesF22/F23 2Dr Coupe/Convertible 2014 Onwards218i 2015 Onwards (B38)220i 2014-2016 (N20)220i 2016 Onwards (B48)228i 2014-2016 (N20)230i 2016 Onwards (B48)M235i 2014-2016 (N55)M240 2016-2021 (B58)F87 2Dr Coupe 2015 OnwardsM2 2015-2017 (N55)M2 Competition 2017 (S55)3 SeriesE46 Coupe/Convertible/Saloon/Estate 1997- 2006320DE90/E91/E92/E93 Coupe/Convertible/Saloon/Estate 2004-2013335D 2006-2013 (N57)4 Series430DF32 F33 F36435dF32 F33 F36M3E90/E92 Coupe/Covertible  2007-2013 (S65) In the Box: Small Forge Sticker3.5mm Black Vac PortCable ties (x10)4mm Vacuum Hose (x3m)Instructions QR Label   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Description We introduce to you the IllumiNite D2S Bi Xenon replacement bulb upgrade!  A simple replacement unit, completely plug and play providing phenomenal results. Suitable for any D2S application including self leveling headlights. Upto 50% Brighter than OEM / Standard Headlights providing a safer driving experience at night but without causing glare to other drivers. Suitable for Projectors - Will not burn lenses! Technical Specs Colour: 6000K White Power: 12v / 35w Fitment: D2S Xenon / HID Pack Contents 2x D2S Bulbs Guarantee Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. 14 day Money back guarantee if unsatisfied Subject to product being returned at Buyers cost in a re salable condition!

Read more less

Upgrade your single filament Brake / Fog Bulb With a brand new design, using lower powered led's with a higher lumen output, you can be sure that this is a fantastic upgrade for your vehicle! Consisting of 24 High powered LED's around the side, and 6 high power projection leds on the end these bulbs give a fantastic projection. We give you, the #Enhanced Edition 382 LED Unit Canbus Error Free on 99% of Vehicles 382 P21WBA15S Please note this will not work on Dual Filament bulbs (1 bulb that does 2 functions EG stop tail) Price is per pair Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Struggling to see when reversing? Need an #Enhanced Upgrade? With a brand new design, using lower powered led's with a higher lumen output, you can be sure that this is a fantastic upgrade for your vehicle! Consisting of 24 High powered LED's around the side, and 6 high power projection leds on the end these bulbs give a fantastic projection. We give you, the #Enhanced Edition 382 LED Unit Canbus Error Free on 99% of Vehicles 382 P21WBA15S Price is per pair Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

Read more less

BONNET VENTS UNIVERSAL Fits: UNIVERSAL PART BUT WE HAVE KNOWN TO FIT ON... Ford Focus 3 RS 2015 - up FORD Fiesta mk7 ST FACELIFT version 2013 -2016 Renault Megane 3 RS version 2010 - 2015 HONDA CIVIC IX TYPE R (FK2) 2015 - up OPEL CORSA D 2006 - and lots more   COMPLETE SET CONTAINS:-> Bonnet Vents GLOSS BLACKOnly one side of the bonnet extension is coated and the rear side is plain black.(Rear site and edge of item is not coated by structure) Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.We can only accept a return within 14 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

UNIVERSAL FRONT BUMPER LIP ADD-ON / WINGLETS     COMPLETE SET CONTAINS:  - Front bumper lip add-on / winglets - Mounting kit (10x stainless steel screws, 2x sticker Maxton design)   This item is in black colour & ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability.Product is made of ABS plastic.   ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Shimmer Effect sticker white text with coral and baby blue shimmer effect and black outline  Sticker is cut and shaped to the black border 133x21mm

Read more less

  The Billet Oil Cap for BMW by MMR Performance is the latest under-bonnet accessory to instantaneously increase the aesthetics of your car.  Built from billet T-6061 aluminium, and with its sleek design allows it to be easily fitted into any engine to give it that extra style.  Available in either Deep Black or Dark Anthracite you have the choice of blending into the shadows or standing out in the crowd, whichever suits your style.  This filler cap will fit all engines with the rounded filler cap which includes all BMW engines post 2007.  

Read more less

The Billet Aluminium Gear Paddle set for the BMW G-Series and F-Series by MMR Performances puts you back in control!! Manufactured from Aircraft Grade T-6061 Aluminium Billet our Gear Shift Paddle Set allows you to take full control, its design feel, and ease of use allows you to fly through the gears and is a natural choice over the OEM paddles. Available in two finishes to match whatever your style may be, Deep Black or Dark Anthracite. The paddle set has been designed using the curves of the steering wheel to maximise comfort and feel when behind the wheel. Specifically made for the track in mind these paddles allow for smooth gear change no matter what the steering wheel angle.They fit all F Series and G Series Vehicles with the latest Gen 3 M Performance Steering Wheel.  

Read more less