Performance - BMW 3 Series G20/G21/G80/G81 (2019-Present)

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our induction kit upgrade for the BMW G87 M2, G80 M3 and G82 M4 models, suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the original air intake system to allow more flow whilst maintaining low intake temperatures, therefore improving response, sound and aesthetics within the engine bay. Having previously designed a number of enclosed induction kits for other performance models, we were keen to develop an intake package for the G8x series to offer significant improvements over standard and compared to other kits on the market. We began with a 3D scan of the engine bay so we could use a CAD program to calculate the most efficient use of space with a perfect fitment. As a result, we chose to utilise the original BMW air box bases with enlarged, two-piece laser cut lids. This increases the capacity of the air boxes to allow the fitment of 80mm cone air filters whilst retaining the original front air feed that ensures a constant flow of fresh air is forced into the air box. The lids feature vents to encourage the flow of air by allowing it to pass by the filter and then exit. Our perfectionist design engineer team also ensured the two air box lids locate perfectly parallel to the strut brace for a balanced aesthetic within the engine bay. The right-hand intake pipe retains the original fittings but features an uninterrupted 80mm diameter throughout to ensure the least restriction all the way to the turbo, whilst the connectors are CNC-machined and allow the use of the original O-rings and tension clips. Using the original air box bases also allows the original rubber mountings to be retained, which reduces vibration. The result is increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay. The kit is a direct replacement that requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed installation instructions. Features:  Comprehensive kit designed specifically for the G8x platform Large cotton air filters for improved flow and increased performance Utilises original air box bases with enlarged two-piece laser cut lids Retains original front intake to direct constant feed of cold air to the filter Improved soundtrack and under bonnet aesthetics Long lasting, high quality black powder coat finish Includes all fixtures and detailed fitting instructions Registered Design Right number: Application Pending AIRTEC part no: ATIKBMW7

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium undertray for the BMW G87 M2, G80 M3 and G82 M4 models. The IssueThe original undertray on these cars is made from plastic and features a large opening to allow air to cool the engine’s oil cooler, which is mounted close to the floor. However, due to the oil cooler’s low-level placement and lack of protection from road debris that may flick up, it is left open and exposed to damage, which could cause imminent engine failure. The SolutionOur solution to creating a direct replacement undertray in aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points. As a result, it requires no drilling or cutting and is completely reversible if required. It also retains the original BMW rubber bumper trim. The laser-cut mesh section ensures no substantial debris can damage the oil cooler and our design also features an additional venting in the stepped section to further improve air flow. Finished in a high-quality black powder coat finish, the undertray offers improved protection, durability and cooling effectiveness. Please note: The undertray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original BMW fittings should only be used if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from BMW, as failure to do so may cause the undertray to work loose. Features: · Direct replacement for original BMW G-series M car undertray · Created from 3D scan and CAD software for perfect fitment · Fine mesh protects the exposed low-level BMW oil cooler · Made from high-quality aluminium for increased strength · Uses original mounting points – no cutting or drilling required · Improved cooling ability due to larger venting · Comes in a durable black powder coat finish Registered Design Right number: Application Pending AIRTEC part no: ATMSBMW20

Read more less

  As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our wheel arch liner clearance grilles for the BMW G87 M2, G80 M3 and G82 M4 models. The IssueThe original BMW arch liners feature a vented section to allow air to escape from the front bumper. However, this section has very little clearance to the tyre when turning, which is acceptable for a standard car, but when modified with lowered suspension, larger tyres or even simple wheel spacers, it causes the tyre to make contact with the vented section and instantly damages it. The plastic fins can then break off and these can also damage the tyre. The SolutionSimple yet effective, our design team developed replacement grilles that can be fitted to the arch liner to provide the necessary extra clearance. Tested on a lowered car with larger tyres, these grilles still ensure large debris cannot pass through whilst allowing air to escape from the front bumper. Made from 2mm aluminium and finished in a high-quality black powder coat, the grilles feature our own hexagonal design that’s laser cut into the grille. The grilles attach to the arch liner with seven fixings each side to ensure they are rigid and the kit comes with all fixtures and fittings, as well as detailed installation instructions. Please note: Drilling and removal of the original vents is required in order to fit. Features:  Kit designed specifically for the G8x M model platform Made from 2mm aluminium with laser cut design Replaces the original BMW plastic grilles Tested on a lowered car with larger tyres Ensure debris cannot pass through and allowing air to escape Attach to the arch liner with seven fixings (drilling required) Long lasting, high-quality black powder coat finish Includes all fixtures and detailed fitting instructions Registered Design Right Number: Application Pending AIRTEC part no: ATMSBMW24  

Read more less

AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

Read more less