Performance - Ford Focus MK3 (2010-2018)

  Designed to fit solely with our AIRTEC Motorsport Mk3 Focus ST/RS and Mk4 Focus ST cast inlet manifold upgrade, this fuel rail allows four additional top feed fuel injectors to be easily added. Working in conjunction with the car’s original Direct Injection set up, this offers hugely increased fuelling capabilities that are required when pushing power to a much higher level.  Machined from high-quality aluminium and finished in anodised black, the fuel rail features ORB-8 fittings at both ends that adapt to AN-6 male fittings, which come supplied.  The comprehensive fitting kit also includes mounting brackets, O-rings for the ORB fittings as well as all fixtures required to fit directly to the manifold.  Please note: Does not include injectors, fuel lines or fuel line fittings for the engine side.  AIRTEC part no: ATMSFO161

Read more less

  As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Mk3 Focus ST and RS owners who want to further improve the performance and potential of their cars for track or fast road use. Direct Replacement FitDesigned to fit both the 2.0-litre ST and 2.3-litre RS models, the manifold is a true direct replacement that utilises all of the original fixtures and fittings, including the standard throttle body and therefore pipework. There are also provisions to fit either the original plastic engine cover or the AIRTEC Motorsport replacement engine cover, and the design also includes a moulded fixing tab to secure the vacuum line, as per the original. The comprehensive fitting kit includes a thermal gasket to help reduce heat transfer from the cylinder head, together with all fixtures and fittings, new rubber gaskets as well as detailed installation instructions. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black with a raised AIRTEC Motorsport logo, for a neat OEM+ look to improve the appearance of the engine bay. The design also offers improved flow compared to the original, which in-turn offers a notable increase in throttle response. Remapping is not necessary after fitting, but for optimal gains there would be a benefit.  A key feature of the manifold is its ability to allow an easy solution for extra fuelling capabilities, thanks to the four port injector bosses and fuel rail fittings. This allows additional fuel to be easily added for big power builds without having to use an inlet manifold port injector spacer. Please note: we do not currently supply a direct fit fuel rail but the option will be available in the future.  Features:  True direct replacement fit that requires no additional parts Cast aluminium construction for improved strength  Extra fuelling capabilities with port injection bosses Improved flow and increased throttle response   Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included  AIRTEC part no: ATMSFO151

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Set of 4 vinyl stickers to use interior or exterior  the possibilities are endless  Approx 3cm   

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

Read more less

For nearly 10 years, CEUK have offered illuminated door sills, in various colours and styles! But we had a thought, what about those customers who want a fancy sill plate to greet them on entry to their vehicle, but arent necessarily bothered about it lighting up? And up we came with this! Made from a Dual layer premium Acrylic, our door sills are built on a 2mm acrlyic backing plate with a 3mm face plate in any colour of your choice!  Then, you can choose your design and design colours accordingly! These are supplied as pairs and come fully built up ready to install using the 3m Tape already affixed to the underside! Simply clean the area, remove the backing tape and stick in place - away you go! These are truly universal and will fit any 3 or 5 door vehicle! Please note, they do not light up! Build your own: The base plate is always GLOSS BLACK - this can not be seen! Face Plate: This is the colour of the sill that you will see (Black in our images, Matte Black is recommended) Accent Colour: This is the design at either side of the logo - EG the lines Logo Colour: The colour you want of the logo in the centre! Measurements: 50cm Sill 60cm Sill CM MM Width: 50cm Width: 500mm Width: 60cm Width: 600mm Height: 5cm Height: 50mm Height: 5cm Height: 50mm Thickness: 0.5cm Thickness: 5mm Thickness: 0.5cm Thickness: 5mm Customisation: Want something totally custom and unique to you? Drop us an email at support@ceuk.org with your ideas, and we'd love to offer you a quote! ETA This product being fully customisable to your tastes is made to order and the lead time may be a couple of working days during busy times!

Read more less

Spice up the interior of your Ford with this racing-inspired authentic Ford Performance shift knob. Black shift knob with white 6-speed gear shift pattern. Ford recommends that you use a qualified technician to fit parts. Damage owing to incorrect fitment is not covered under warranty.   Fits all 6 Speed fords Even if the location of the gears differs

Read more less