Performance - Ford Focus MK3 (2010-2018)

  Designed to fit solely with our AIRTEC Motorsport Mk3 Focus ST/RS and Mk4 Focus ST cast inlet manifold upgrade, this fuel rail allows four additional top feed fuel injectors to be easily added. Working in conjunction with the car’s original Direct Injection set up, this offers hugely increased fuelling capabilities that are required when pushing power to a much higher level.  Machined from high-quality aluminium and finished in anodised black, the fuel rail features ORB-8 fittings at both ends that adapt to AN-6 male fittings, which come supplied.  The comprehensive fitting kit also includes mounting brackets, O-rings for the ORB fittings as well as all fixtures required to fit directly to the manifold.  Please note: Does not include injectors, fuel lines or fuel line fittings for the engine side.  AIRTEC part no: ATMSFO161

Read more less

  As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Mk3 Focus ST and RS owners who want to further improve the performance and potential of their cars for track or fast road use. Direct Replacement FitDesigned to fit both the 2.0-litre ST and 2.3-litre RS models, the manifold is a true direct replacement that utilises all of the original fixtures and fittings, including the standard throttle body and therefore pipework. There are also provisions to fit either the original plastic engine cover or the AIRTEC Motorsport replacement engine cover, and the design also includes a moulded fixing tab to secure the vacuum line, as per the original. The comprehensive fitting kit includes a thermal gasket to help reduce heat transfer from the cylinder head, together with all fixtures and fittings, new rubber gaskets as well as detailed installation instructions. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black with a raised AIRTEC Motorsport logo, for a neat OEM+ look to improve the appearance of the engine bay. The design also offers improved flow compared to the original, which in-turn offers a notable increase in throttle response. Remapping is not necessary after fitting, but for optimal gains there would be a benefit.  A key feature of the manifold is its ability to allow an easy solution for extra fuelling capabilities, thanks to the four port injector bosses and fuel rail fittings. This allows additional fuel to be easily added for big power builds without having to use an inlet manifold port injector spacer. Please note: we do not currently supply a direct fit fuel rail but the option will be available in the future.  Features:  True direct replacement fit that requires no additional parts Cast aluminium construction for improved strength  Extra fuelling capabilities with port injection bosses Improved flow and increased throttle response   Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included  AIRTEC part no: ATMSFO151

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium undertray for the Mk3 Focus RS. The original undertray on this car is notoriously weak due to the fibre material construction and as a result are prone to failure over time. Our solution to creating a direct replacement undertray in aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment. As a result, it reuses all original mounting points, as well three additional fittings on the front edge, and is nut and bolted both sides to ensure absolute security. Unlike any other replacement undertray on the market, our design features no step, which is better suited to lowered cars. The cooling ducts are also larger in size to increase air flow passing over the gearbox and transfer case, which helps to reduce transmission operating temperatures and the sides pieces are larger to create a seal against the arch liners. Finished in a high-quality black powder coat finish, the undertray offers improved strength, durability and cooling effectiveness. PLEASE NOTE: The undertray uses existing mounting points and bolts, but it is essential the original plastic fittings the bolts screw into are in good condition. These should only be reused if they still support the bolt properly and you are able to tighten it firmly. If they are worn or broken and offer little to no resistance as you wind the bolt in, they should be replaced with new items from Ford, as failure to do so may cause the undertray to work loose. The Ford part number for the plastic undertray fittings are as follows: W702438-S300  Features: Direct replacement for original Focus RS Mk3 undertray Created from 3D scan and CAD software for perfect fitment Made from high-quality aluminium for increased strength Uses original mounting points – no cutting or drilling required Additional mounting points for absolute security  Improved transmission cooling due to larger ducting Comes in a durable black powder coat finish Registered Design Right number: Application Pending AIRTEC part no: ATMSFO149

Read more less

Gold and silver currently discontinued pending new material sourcing Add the finishing touch to your engine bay with our 12 piece under bonnet plate set.  These parts are the ideal compliment to our Under Bonnet Panels, Under Bonnet Finishing Plates  and Upper Bonnet Catch Plates. Please note some photographs show a range of our other dress up parts.  You will receive the 12 pieces as per the main product image. *** Please note that the 6 thin pieces will be supplied flat.  Due to the contours of the bonnet you will need to gently heat the material (from the back) with a hairdryer or heat gun and gently mould them into place.  The 6 thin pieces will not be supplied with double sided tape as we recommend sticking these on with a small amount of sealant to ensure a secure fitment ***

Read more less

Gold and silver currently discontinued pending new material sourcing Add the finishing touch to your engine bay with our 2 piece under bonnet plate set.  These parts are the ideal compliment to our Under Bonnet Panels, Under Bonnet Finishing Plates and Upper Bonnet Catch Plates. Please note some photographs show a range of our other dress up parts.  You will receive the 2 pieces as per the main product image plus the small semi-circular piece for the recess at the bottom-centre of the bonnet.

Read more less

Battery cover top trim with FRS logo. Great addition for your new Focus RS MK3This battery top trim fits over original battery cover and is secured by x4 m5 button head allen key boltsEasy fit, takes 5 minutes to fit.

Read more less

Surround has cut out for bonnet ajar switchFitting is really simple, remove old bonnet latch bolts fit new stainless latch surround and secure with new stainless bolts provided.AIRTEC part no: ASCOVFO38

Read more less

Battery cover top trim with ZS or FST logo. Great addition for you Zetec S or ST250This battery top trim fits over original battery cover and is secured by x4 m5 button head allen key boltsEasy fit, takes 5 minutes to fit.Please choose from options.

Read more less

Gold and silver currently discontinued pending new material sourcing Add the finishing touch to your engine bay with our 3 piece Under Bonnet Panel set. CNC machined from high quality plastic these panels are much lighter than the stainless steel mirrored plates on the market reducing the risk of them dropping off and also the additional weight on the bonnet. Panels come ready for fit with 3m tape applied.  Fitment is straight forward and takes 15 minutes - no cutting or drilling is required.  You will need to remove the bonnet sound pad to fit these items. Please note the reflective finish on the Chrome variants may be slightly different to other metal products on the market - please see photos.   Please ensure you select the correct vehicle variant as the parts are shaped slightly differently on the Mk3 and Mk3.5.   logo: If you would like a RS / ST logo vinyl sticker please email support@ceuk.org

Read more less

Description Brighten up your car key with a colour coded key cover! Professionally painted to match (or contrast if preferred) the colour of your car, these covers clip easily around your existing key. This is not a replacement shell, this product clips around the grey plastic shell supplied by Ford from the factory. Fitting takes a matter of seconds. These will fit any 'Keyless Start' key in the shape pictured but will not fit the 'Flip' style keys.  Just some of the compatible models include: Ford Fiesta Mk7.5 (inc ST) Ford Fiesta Mk8/8.5 Ford Focus Mk3/3.5 (inc RS/ST) Ford Puma Mk2 A small lanyard is supplied to help keep the key rings away from the paint but we strongly advise removing your key from your bunch of keys before fitting to avoid potential contact damage in your pocket.  The paint finish is resilient but not indestructible so dropping the item onto a hard surface (concrete etc) may result in damage. Please read fitting instructions supplied before attempting to fit item to existing key.   Guaranteed fit for Ford Fiesta Mk7.5 Ford Fiesta Mk8 Ford Fiesta Mk8.5 Ford Fiesta ST180 Ford Focus Mk3 Ford Focus Mk3.5 Ford Focus Mk4 Ford Puma Mk2

Read more less

Description A ("Show only") cover for Ford’s Mk3.5 Focus1.0 Ecoboost engine which has been carefully thought through to mount in place and hide the unsightly engine for the purpose of showing off your engine bay.  The cover is for cosmetic purposes only and must not be left on the car when driving (see further info below).  The cover can be easily fitted/removed in less than 5 minutes however. This cover has been designed to fit on a stock vehicle.  We are not able to accept responsibility for the cover not fitting if other after market parts are fitted. Where such parts have been fitted, you may need to adjust your cover to get it to fit correctly. Designed primarily for the custom car scene this cover gives you the chance to customise your engine bay rather than retro fitting a foam cover found on some Focus models.  Choose from our range of finishes including: Textured Grey Plastic (OEM look) Gloss Colours (Various) Smooth Grey Plastic (to prep/paint yourself) High Quality Painted/Hydrodip (contact us for more information) This part will fit all Mk3.5 Focus vehicles that have the 1.0 Ecoboost engine.  Please contact us before purchasing if you are unsure.  (Photos show a Fiesta with the same engine). Disclaimer:  Unlike our other engine covers, this particular cover must not be fitted to the car when driving.  Due to the positioning of the turbo on these vehicles, heat from your engine may distort it which can potentially damage engine bay components.  We cannot accept any responsibility for damage caused to your car if the cover has been left in place whilst the car has been driven. NB: Please note raw parts (smooth plastic for painting) may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

A ("Show only") cover for Ford’s Mk3.5 Focus1.0 Ecoboost engine which has been carefully thought through to mount in place and hide the unsightly engine for the purpose of showing off your engine bay.  The cover is for cosmetic purposes only and must not be left on the car when driving (see further info below).  The cover can be easily fitted/removed in less than 5 minutes however. This cover has been designed to fit on a stock vehicle.  We are not able to accept responsibility for the cover not fitting if other after market parts are fitted. Where such parts have been fitted, you may need to adjust your cover to get it to fit correctly. Designed primarily for the custom car scene this cover gives you the chance to customise your engine bay rather than retro fitting a foam cover found on some Focus models.  Choose from our range of finishes including: Textured Grey Plastic (OEM look) Gloss Colours (Various) Smooth Grey Plastic (to prep/paint yourself) High Quality Painted/Hydrodip (contact us for more information) This part will fit all Mk3.5 Focus vehicles that have the 1.0 Ecoboost (2018-2020 variant) engine.  Please contact us before purchasing if you are unsure.  (Photos show a Fiesta with the same engine). Disclaimer:  Unlike our other engine covers, this particular cover must not be fitted to the car when driving.  Due to the positioning of the turbo on these vehicles, heat from your engine may distort it which can potentially damage engine bay components.  We cannot accept any responsibility for damage caused to your car if the cover has been left in place whilst the car has been driven. NB: Please note raw parts (smooth plastic for painting) may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

*** Please note the items may take 10 working days to be dispatched due to demand following launch *** Our new slam panel cover fits neatly over the existing factory slam panel and is fixed using strong double-sided tape (supplied).  Taking just minutes to fit, this panel is the finishing touch to any detailed engine bay. There is no need to remove the bumper to fit this part. Available in a range of Gloss plastic finishes, these parts can also be painted or hydrodipped as a custom order (please contact us for details). Why not add our Pre-Facelift slam panel end plates for the complete package? Buy together and save 10% on the price of the end plates (discount automatically applied at checkout). Please note that this item comes with fitment instructions but all vehicles are aligned differently from the factory so you may need to adjust your bonnet bump stops slightly to ensure bonnet clearance.  This listing is for the centre panel cover only and not the ends shown in some of the photos. This part will fit all Mk3 (Pre-Facelift) Focus ST vehicles only.  We are working on a version for other Mk3 variants that have a rubber gasket fitted. 'Speed shape' photos shown for colour demonstration purposes only

Read more less

Tidy up your engine bay with a Proform Engine Bay Dress Up Kit. Ready to fit straight to your vehicle choose from a variety of finishes to best compliment your vehicle.  Available in raw plastic, which comes ready to be prepared, sanded and painted/ hydrodipped, and OEM factory style textured plastic. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. These kits are designed to fit over the top of your existing covers and are secured in place using high quality adhesive Velcro so there is no need to remove your OE covers. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the kit creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. Please ensure you select the correct variant for your vehicle as the header tank cover shape varies. The kit includes: Header Tank Cover Battery Cover Fuse Box Cover Fitting Kit Including Instructions

Read more less

Tidy up your engine bay with one of our new domed Proform Coolant Cap Covers. Item fits over your existing cap to hide the unsightly mouldings. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/ hydrodipped. Also available in OE style textured plastic, and range of coloured plastics including gloss black plastic and carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk 6/7/8 Fiesta and Mk 2/3/4 Focus models. NB: Please note the raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with one of our newly revised domed Proform Brake Fluid Cap Covers. Item fits over your existing cap to hide the unsightly mouldings. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/hydrodipped. Textured plastic is also available for the OE factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all derivatives of the Mk6/7/8 Fiesta and Mk2/3/4 Focus models. NB: Please note smooth plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Fuse Box Cover. Available in smooth plastic, which comes ready to be prepared, sanded and painted/ hydrodipped, and OEM factory style textured plastic. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A bespoke and registered design to us, the item fits over the top of your existing fuse box cover, hiding the logos and untidy clips. The tops are curved so when painted create a great reflective surface. Fits all Mk2 and Mk3 Focus models but please compare the photos with the shape of the fuse box on your vehicle before purchasing the item to be certain. Also available as part of our three piece Dress Up Kit. NB: Please note raw items may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Washer Bottle Cap Cover. Item fits over existing cap.  These covers are available in a range of finishes, including an assortment of coloured plastics. The coloured plastic covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Alternatively, the covers are available in smooth plastic, which is ready to be painted, and textured OEM plastic.  Fits all Mk3 Focus models. NB: Please note smooth raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Engine Bay coolant cover. Supplied in a selection of finishes; the smooth plastic, which comes ready to be prepped and painted/hydrodipped, and the OEM textured plastic, which gives that factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A registered and bespoke design to us, each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the coolant cover creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. When painted/ hydrodipped to a high standard the curved tops of these covers really shows off the paint finish or hydrodip print, and will really make your engine bay stand apart from the rest.  Fits all Focus Mk3 Models.  Please ensure you select the correct variant for your vehicle as the header tank cover shape varies. Also available as part of our three piece Dress Up Kit. NB: Please note that the raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform engine bay battery cover. Available in smooth plastic, which comes ready to be prepared, sanded and painted/ hydrodipped, and OEM factory style textured plastic. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. This registered and bespoke design to us, each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. Fitting over the top of your factory parts,these covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the battery cover creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. When painted/ hydrodipped to a high standard the curved tops of these covers really shows off the paint finish or hydrodip print, and will really make your engine bay stand apart from the rest.  Fits all Mk3 Focus models including RS/ST.  Also available as part of our three piece Dress Up Kit. NB: Please note raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Diesel Oil Cap Cover. This item fits over your existing cap. Available in smooth plastic, which comes ready to be prepared, sanded and painted/ hydrodipped, and OEM factory style textured plastic. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk7 Fiesta and MK3 Focus models with diesel engines. This item will not fit the petrol variants. NB: Please note raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform engine cap cover kit. The kit includes: Coolant Cap Cover Brake Reservoir Cap Cover Engine Oil Cap Cover All covers come ready to be fitted - they simply fit over your existing engine caps. Supplied in raw plastic, the item comes ready to be prepared, sanded and painted/hydrodipped. Textured plastic is also available for the OE factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Please note these are not our hydrodipped caps - these are available in the painted cap listing.  Why not pair this item with our Custom Cap Vinyl Sticker Set? Covers fit all variants of the MK6/7/8 Fiesta and MK2/3 Focus petrol or diesel, please look through the photographs and select the relevant oil cap variant for your car. The coolant and brake fluid caps are the same on all models, you just need to check which oil cap you have fitted on your vehicle and ensure it matches the photograph.

Read more less

A simple and cost effective cover for the MK3 / 3.5 Focus & Mk2 Puma bonnet catch. This item simply slots over the top of your existing Ford part, so there is no need to buy genuine Ford items or risk damaging the brittle clips trying to remove it from the slam panel. These covers are available in a range of finishes, including an assortment of coloured plastics. The coloured plastic covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Alternatively, the covers are available in smooth plastic, which is ready to be painted, and textured OEM plastic.  We also stock some painted/hydrodipped covers, which are manufactured from smooth plastic before being prepped and painted to a show car quality finish. Please choose your option from the drop down list. The covers come complete with an adhesive pad and takes seconds to fit. Please note raw plastic items may contain manufacturing marks which are easily removed when prepping for paint. 

Read more less