![Performance - Ford Focus MK4 (2018-Present)](http://www.carenhancementsuk.co.uk/cdn/shop/collections/mk4_focus_st.jpg?v=1725609361&width=640)
Performance - Ford Focus MK4 (2018-Present)
Wide Mouth / Snorkel - MK4 / 4.5 Ford Focus
Wide Mouth / Snorkel / Big Mouth / RamAir Snorkel - MK4 / 4.5 Focus Injection moulded and manufactured from ABS, not 3D printed like others! Bolts straight in place (No Fitting Kit Supplied) Available in multiple colours. Enables cold air from the grille to be sucked directly into the air feed and straight to the airbox.
£48.00
Enhanced Edition Double Boot Light Kit - Full Replacement LED Boot Unit - MK4 Focus
A standard boot bulb not bright enough? The LED bulb just not quite cutting it? One unit just not giving you enough? This is for you! The all new Double Boot Kit with Full LED replacement Unit is here, and features a whopping 18 LED'S Per side that are all pointing in the direction that you need it! 5x Brighter than our boot bulb upgrade alone and 18x brighter than OEM, this really is Enhanced! And thats just per side! This fully replaces the OEM unit and bulb to look fully OEM once installed! This kit does require you to trim the boot plastic to create a hole for the new unit to sit. When you remove the trim, there is a cutting template on the rear of the panel to follow! Specs: Long Life Span & Fully Error Free Low Power Consumption with High Lumen Output Simple to install - Takes just Minutes after the cutting is complete 12v | 5000K White OR Choice Of Colour | Direct OEM Plug Fitment Confirmed Fitting Vehicles (May Fit Others Not Listed): MK4 Focus All Models (Including Facelift) Whats in the kit? 2x 18SMD Full Replacement Boot Units 1x Wiring Loom Extension How does this kit work? The kit uses the single plug already in place that plugs to your current boot light, the extension has a splitter at the connection end and then enough cable to route to the other side of the boot to reach the second unit, so both light units are powered off a single connection. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.
£34.00
PlexiClick® - Invisible Number Plate Holder Clip
This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily
£10.00
Set of 4 vinyl logo stickers
Set of 4 vinyl stickers to use interior or exterior the possibilities are endless Approx 3cm
£2.00
Number Plate Tags - Ford Logo's
Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo
£6.00
Ford Replacement Door Sill Plates
For nearly 10 years, CEUK have offered illuminated door sills, in various colours and styles! But we had a thought, what about those customers who want a fancy sill plate to greet them on entry to their vehicle, but arent necessarily bothered about it lighting up? And up we came with this! Made from a Dual layer premium Acrylic, our door sills are built on a 2mm acrlyic backing plate with a 3mm face plate in any colour of your choice! Then, you can choose your design and design colours accordingly! These are supplied as pairs and come fully built up ready to install using the 3m Tape already affixed to the underside! Simply clean the area, remove the backing tape and stick in place - away you go! These are truly universal and will fit any 3 or 5 door vehicle! Please note, they do not light up! Build your own: The base plate is always GLOSS BLACK - this can not be seen! Face Plate: This is the colour of the sill that you will see (Black in our images, Matte Black is recommended) Accent Colour: This is the design at either side of the logo - EG the lines Logo Colour: The colour you want of the logo in the centre! Measurements: 50cm Sill 60cm Sill CM MM Width: 50cm Width: 500mm Width: 60cm Width: 600mm Height: 5cm Height: 50mm Height: 5cm Height: 50mm Thickness: 0.5cm Thickness: 5mm Thickness: 0.5cm Thickness: 5mm Customisation: Want something totally custom and unique to you? Drop us an email at support@ceuk.org with your ideas, and we'd love to offer you a quote! ETA This product being fully customisable to your tastes is made to order and the lead time may be a couple of working days during busy times!
£25.00 - £30.00
CEUK Rear Bumper reflector Guards - MK4 & MK4.5 Focus (All Models - Estate)
CEUK Rear Reflector Guards for the MK4 and MK4.5 Focus (all models). ESTATE ONLY Fits all models of the MK4 and MK4.5 2017-2024 Focus ESTATE Protect your rear reflector whilst adding some style at the same time! Cut from Premium 2mm Acrylic these don't just protect, but #Enhance Available in Premium Gloss Black 2 different designs to choose from Cut from Premium 2mm Acrylic Solid 3M Adhesive installation - will not fall off! Perfect Fit Designed & Manufactured in CEUK HQ West Yorkshire The design is cut into the guard so the reflector shows through Instructions are provided however they are self explanatory - remove the backing paper to expose the weatherproof 3M adhesive and hold firmly in place for upto 30 seconds whilst it affixes! Why? They just look cool!! Whats in the Kit: 2x Fog Guards (Left & Right) Double Sided Weatherproof Tape (Already applied) Instructions Please ensure you have some Isopropanol Alcohol or an Alcohol wipe to clean the area before application!
£12.00
MK4 Focus - OEM Style Footwell Light Unit Upgrade
An enhanced Edition treat in the form of our ridiculously bright footwell upgrade for the MK4 Focus - Now as a full complete replacement unit. Unit is for NONE COLOUR CHANGING footwell lights only - This will NOT work with cars that have colour changing footwell lights! What have we done? Not only have we taken the OEM chip board which features just a measly 1 LED chip and added an additional 11 - giving you a total of 12 SMD's. We've gone further! The OEM housing is frosted, giving a diffused look and output. This has been done by Ford to mask the poor performance of a single LED chip - and allow the light to be dispursed around the area rather than directional; This also dulls the light output by about 30% Clearest Unit Ever! Our brand new unit is 100% Clear, which stops the dulling affect of the output; When you couple this with 12x more LED's than standard, well the numbers speak from themselves! This is a totally brand new pioneering product designed & created by our Enhanced Edition team in the UK! We believe Every single MK4 has the wiring for the Footwell lights (The ST has Footwell lights and we have found wiring In all lower spec MK4 Focus during testing) - under your Footwell there will be a hole - the wiring should be inside this hole, often clipped up behind the streering wheel panel.! A powerful 12SMD Led board (OEM Unit has 1smd) available in 4 colours - which adds both ambience and brilliance to your interior When do they work? 1: when you open the door of your vehicle 2: when you switch the engine off after a drive 3: when your Engine is switched on (giving interior Ambience during drives) The lights Mimic your ambient lighting, and will come on when the doors are opened, or the headlights are switched on! have you been #Enhanced Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Please Note - Green & Orange is not currently available in the oem style unit! WATCH THE LAUNCH VIDEO
£20.00£18.00
ST Logo Replacement (Small)
Small ST logo Designed to work with our Cup Holders and Fog Guards which have a section for the ST logo to be placed supplied with a 3M backing in many colours. Sold as Singles
£1.00
CEUK Rear Bumper reflector Guards - MK4 & MK4.5 Focus (All Models - Hatchback)
CEUK Rear Reflector Guards for the MK4 and MK4.5 Focus (all models). HATCHBACK ONLY Fits all models of the MK4 and MK4.5 2017-2024 Focus Hatchback Protect your rear reflector whilst adding some style at the same time! Cut from Premium 2mm Acrylic these don't just protect, but #Enhance Available in Premium Gloss Black 4 different designs to choose from Cut from Premium 2mm Acrylic Solid 3M Adhesive installation - will not fall off! Perfect Fit Designed & Manufactured in CEUK HQ West Yorkshire The design is cut into the guard so the reflector shows through - should you wish to have a coloured ST logo insert for your guards these are sold separately here Instructions are provided however they are self explanatory - remove the backing paper to expose the weatherproof 3M adhesive and hold firmly in place for upto 30 seconds whilst it affixes! Why? They just look cool!! Whats in the Kit: 2x Fog Guards (Left & Right) Double Sided Weatherproof Tape (Already applied) Instructions Please ensure you have some Isopropanol Alcohol or an Alcohol wipe to clean the area before application!
£12.00
Enhanced Edition 955 (T15) LED indicator upgrade - canbus friendly
955 (T15) LED indicator upgrade these replace any wedge fit indicator bulbs for ultra bright LED canbus friendly alternative upgrade your output today and be sure to never be missed again! 5x brighter than OEM - Canbus friendly in most vehicles
£20.00£18.00
Number Plate Frame - Ford Variants (Multiple Logo's)
3D / 4D Number Plate frames! These are an Acrylic frame that your number plate sits in to add a bit of style to your car! Made up of 3 pieces to give a full customised number plate holder! Backing Base Plate Frame Surround Coloured insert with or without logo! Price is for One Frame - if you would like front and rear, please order QTY x2 You choose the following 3 options: The colour of your Insert Which logo you want - If Any The colour of your logo! The frame of the plate is always provided in BLACK. The logo is cut out of the insert - then a second coloured logo of your choise is inserted into the gap to give it a fully smoth and professional finish! How it works? Simply insert your number plate inside the frame using either a gel or foam double sided tape - then attach the frame to your car. These are suitable for front and rear number plates. Due to the nature of acrylic, its difficult to drill without it cracking so the frame needs to be stuck to the vehicle. We do offer a full fitting kit as well which is smaller double sided acrylic rectangles that attach to the back side of the frame and again to the car. Fitment: Please be aware these require a FLAT SURFACE to be adhered to, For the rear which has the beveled recesses for the holes our fitting kit will allow fitment, however, due to their weight and inability to be drilled you will struggle to insert these plates over say a honeycomb or mesh grill. In these instances it may be worth just ordering for the rear! It is important you fully prepare the area before sticking these in place to prevent loss. If the plate falls off your vehicle and is damaged or lost sadly this is not covered under warranty. If you require any customisation please get in touch via Email or Whatsapp, If we can do this - we will. This may incur additional costs however!
£25.00 - £27.50
** CLEARANCE ** Ford Performance Number Plate Holder Set of 2 **QUALITY ISSUE**
SLIGHT QUALITY ISSUE WITH A HANDFULL ON THE LAST BATCH SO THESE ARE NOW UP FOR CLEARANCE. THE MOULD APPEARS TO HAVE BLED CAUSING LITTLE BITS OF MELTED PLASTIC ON THE CLIPS WHICH NEEDS TRIMMING OFF WITH SNIPS OR A BLADE AND THE OVERALL QUALITY IS ABOUT 20% LOWER THAN EXPECTED. THESE ARE PERFECT FOR A "DIY'ER" WHO WANTS TO HAVE A FIDDLE ON THE CHEAP. NONE RETURNABLE Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates.
£30.00£10.00
MK4 Focus ST - Carbon Fibre Steering Wheel Trim Surrounds
Carbon fibre look steering wheel trim surrounds for MK4 Focus ST Will fit ANY MK4 Focus - however has embossed ST Logo Includes embossed ST logo - Simply attach using the 3M tape provided Transforms the look of any wheel! Supplied with Alcohol wipe & Instructions
£36.00£30.00
Door Lock Cover - MK4/MK4.5 Focus (All Models)
The CEUK Door Lock covers are specifically designed to fit over your door Latch Unlike most plastic pieces on the market, ours are made from Aluminium and Annodised! Sold as a Pair (Left and Right) these will fit both 3 and 5 door vehicles (Click "Yes" to add rear for 5 doors if you wish for the full set) Secured on using supplied 3M VHB Tape, these are fitted in seconds Confirmed fitment: MK4 & MK4.5 Focus - 2018> May fit other vehicles of Ford produced at similar time
£8.00 - £16.00
4D ST Replacement Badges - Multiple Colours (Fiesta Mk7.5 & MK8/8.5 > Focus Mk3, 3.5 & 4 > Puma MK2)
Replace your Awful Chrome and Red ST badges with our full 4D Replacement's Made from Premium 3mm Acrylic (6mm total with 2 colours) these come with 3M Tape already applied to stick straight on in place of your existing badges! Using the latest in Laser technology, these badges are cut with a smooth edge for a perfect finish! And using 3M's best Out door tape, which gets stronger in adverse weather conditions guaranteeing you will never lose them! Create your own look, with ANY colour Backing and Front to give you a truly Unique experience! The price shown is for 1 Pair (1 Front Small and 1 Rear Large) This is NOT a Gel Inlay - Your OEM Badges will need to be removed
£12.00
Enhanced Edition Full Replacement LED Boot Unit - MK4 Focus
A standard boot bulb not bright enough? The LED bulb just not quite cutting it? This is for you! The all new Boot LED replacement Unit is here, and features a whopping 18 LED'S that are all pointing in the direction that you need it! 5x Brighter than our boot bulb upgrade alone and 18x brighter than OEM, this really is Enhanced! This fully replaces the OEM unit and bulb to look fully OEM once installed! Price is for 1 Unit! We can sell the option to have 2 units, with an extension loom however this would require you cutting a hole in your boot for the unit to slot info - The panel has a template on the rear for you to cut out and is very simple to do! Please email for more info. Specs: Long Life Span & Fully Error Free Low Power Consumption with High Lumen Output Simple to install - Takes just seconds 12v | 5000K White OR Choice Of Colour | Direct OEM Plug Fitment Confirmed Fitting Vehicles (May Fit Others Not Listed): MK4 Focus All Models (Including Facelift) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.
£12.00 - £34.00
Trim Removal Tool - 3 Piece Kit
3 Piece trim removal tool kit. Ideal for those little jobs, We use these for installing sequential indicators and fog light guards as they work great at removing mirror caps and fog surrounds All 3 tools are the same size with 1 narrow end.
£1.80£1.50
Replacement H7 HID Bulb
Price is for 1 single bulb H7 Replacement HID Bulb for almost any HID Kit, including our Enhanced & Ultimate Kits Perfect replacement for a bulb that has given up the ghost or just doesn't seem as bright any more! Available in 5000k or 6000k - Price is for 1 Single Bulb Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Depending on batch, live cable may be red or blue, so please don’t be concerned if the picture shows a blue cable and yours is red - the product is the same. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.
£18.01£15.00
Genuine Carbon Fibre Gear Knob - RS Logo
Here we have a Genuine Carbon Fibre gear knob for most ford models 2009 onward. Constructed from full Carbon Fibre, with the Gears 1-6 and R printed on as well as the Blue RS logo then coated in a thick clear coat to protect from damage! Simple install, unscrew old know and install this one. Unfortunately the pattern of the gears cant be changed, so whilst this item may fit your vehicle the pattern of the numbers may differ to the location of the gears on your vehicle (MK8 1.0 etc) Please note: Whilst this is genuine carbon, This is not the genuine ford part - if you would like the genuine ford part please search code 2215799 in the search bar
£95.99£79.99
Genuine Carbon Fibre Gear Knob - ST Logo
Here we have a Genuine Carbon Fibre gear knob for most ford models 2009 onward. Constructed from full Carbon Fibre, with the Gears 1-6 and R printed on as well as the Red ST logo then coated in a thick clear coat to protect from damage! Simple install, unscrew old know and install this one. Unfortunately the pattern of the gears cant be changed, so whilst this item may fit your vehicle the pattern of the numbers may differ to the location of the gears on your vehicle (MK8 1.0 etc) Please note: Whilst this is genuine carbon, This is not the genuine ford part - if you would like the genuine ford part please search code 2215799 in the search bar
£96.00£80.00
Chaser Edition RGB Footwell Kit - Universal Fit ANY Car
Description Now we give you the Chaser Edition Bluetooth footwell strip kit This kit is for any car, simply tell us in the description what fuse type you have in your glove box fuse holder and we will send it out! with over 600 static colours, and 200 “Fluid” colour changing and dancing modes this really is a game changer Controlled fully by your mobile phone using Bluetooth and our fantastic control app all the functions are controlled by you! Powered by your ignition the strip will come on as soon as you start your car and remain on until the ignition is switched off, The kit utilises your passenger footwell fuse box for power What’s in the Box? Footwell Strip Wiring Loom Bluetooth Control Module Instructions Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Glove Box strip not included - This is for other Models - Images are catalogue images Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£66.00£55.00
Slime Smart Tyre Repair Kit 12V Compressor And 473ml Solution
Description: The Slime Smart Spair is "THE SMART WAY TO FIX FLATS FAST". No need to jack-up the car or remove the wheel - just install Slime tyre sealant, plug in the air compressor, turn it on, reinflate and go. Stow it under your car seat or in the boot - The Smart Spair offers a portable solution for flat tire repair. No need to remove the tyre. No need to wait for recovery assistance. Avoid dangerous roadside delays. Fix a flat fast - in 15 minutes or less! Emergency repair kit fixes a in 15 minutes No need to remove the tire 300psi 12v Tyre inflator with adapters included Includes a bottle of Slime tire sealant and a portable air compressor Seals punctures up to a quarter-inch Repairs punctures up to 6mm in tubeless tyres Comes with adapters to inflate mattresses, balls or other inflatables
£43.20£36.00
Ring RAC610 12v Mini Tyre Inflator
Description: When traveling Abroad, or even in the UK its always best to have a tyre inflator in your vehicle! 12v with fused cigerette lighter plug - up to 300psi. Complete with adapter kit for football and bicycle. 3mtr Cable - Enough to use even on large vehicles.
£28.80£24.00
![Performance - Ford Focus MK4 (2018-Present)](http://www.carenhancementsuk.co.uk/cdn/shop/collections/mk4_focus_st.jpg?v=1725609361&width=640)