CHECK WHAT OFFERS ARE CURRENTLY LIVE: CLICK HERE
TrustPilot Rating 4.6 ★★★★☆ - EXCELLENT - Read our 860+ Reviews

CloseClose
CloseClose
Close

Performance - Ford Focus MK4 (2018-Present)

20 products

  • DIRENZA - Ford Focus MK4 ST – MVT Front Mount Intercooler 2018 – Present - Car Enhancements UK

    Direnza DIRENZA - Ford Focus MK4 ST – MVT Front Mount Intercooler 2018 – Present

    Provided performance gains of +21.8bhp / 16.8nm Intake Temperatures reduced by 10°C 116.7°c Temperature drop Designed using state of the art 3D CAD and CFD modelling Direct replacement for the original Intercooler TIG welded for maximum strength and durability MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power. Test car: Ford Focus MK4 ST 291.4hp / 429.2nmPut through its paces on a state-of-the-art Maha MSR 500 Dyno, our Multi Vane Technology Intercooler for the Focus ST yielded some highly impressive results. After installing our revolutionary MVT Intercooler, engine performance improved significantly. With the Focus now producing 313.2hp & 445.9nm of torque, that’s an increase of +21.8hp & 16.7nm of torque without any additional tuning. What’s more impressive is the cooling power of MVT. Using sophisticated data logging software, we measured intercooler inlet temperatures at 140.1°c. The stock intercooler performed well, reducing this to 63.9°c at the Intercooler outlet. However, with MVT installed, outlet temps were reduced an additional 40.5°c down to 23.4°c! That’s an overall temperature drop of 116.7°c. Thus, providing huge tuning potential and greater reliability when combined with a remap & supporting modifications. The perfect addition to any track or modified road car!

    £434.99

  • AIRTEC MOTORSPORT SECONDARY INTERCOOLER FOR FORD FOCUS ST MK4 - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT SECONDARY INTERCOOLER FOR FORD FOCUS ST MK4

    TECHNICAL DATA As part of our expanding Mk4 Focus ST product range, AIRTEC Motorsport are proud to launch our secondary intercooler kit for fast road and/or track use. The challengeDue to the limited space available in the upper grille area due to the car’s intake system and ducting, it isn’t possible to fit a full-size front mount intercooler to fill the entire height of the grille without significant modification. Whilst we do offer an intercooler upgrade with a deeper core design (AIRTEC Motorsport Intercooler Upgrade for Focus ST Mk4), we still looked at other ways to improve cooling and reduce charge temperatures without having to cut or modify the car. The solutionDesigned and developed at AIRTEC HQ in the UK, our solution was to develop a secondary intercooler that mounts underneath the car behind the undertray and is fed fresh air from a duct. By adding a second intercooler in place of the pipework section after the turbo, we were able to significantly reduce the temperature of the air before it entered the primary front mount intercooler, allowing it to operate more efficiently whilst offering a huge increase in overall capacity to the whole system. Despite this huge improvement, the kit fits neatly behind the undertray and can be reverted back to standard with no issues. The comprehensive fitting kit includes Pro Hoses silicone pipes together with all the required fixtures and fittings, as well as step-by-step instructions. The testingUsing a Stage 2 tuned car, measuring intake temperatures during back-to back testing on the road over eight consecutive runs showed that with the secondary intercooler in place charge temperatures were reduced by up to 44 degrees, proving the set up worked effectively and efficiently. AVERAGE INTERCOOLER OUTLET TEMPERATURE WITHOUT 2nd Intercooler 53.1 WITH 2nd Intercooler 14.4 Difference -73% Please note: Only fits manual gearbox models. Will fit with original boost pipes and intercooler or with AIRTEC Motorsport big boost pipe kit and/or our uprated intercooler.  Dimensions:Capacity: 2.7 litresFront area: 442cm² AIRTEC Part Number: ATINTFO61

    £496.07

  • AIRTEC MOTORSPORT INTAKE AIR FEED FOR FOCUS MK4 ST (IAF) - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT INTAKE AIR FEED FOR FOCUS MK4 ST (IAF)

    Designed to fit with our AIRTEC Motorsport enclosed induction kit or the original air box, the replacement air feed fits in place of the original but offers improved flow by increasing the intake area. This allows it to draw in more fresh air and direct it towards the air filter, keeping a constant supply of cool air. AIRTEC Part No: ATMSFO142 TECHNICAL DATA As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch the intake air feed for the ST model, suitable for track or fast road use. Designed to fit with our AIRTEC Motorsport enclosed induction kit or the original air box, the replacement air feed fits in place of the original but offers improved flow by increasing the intake area. This allows it to draw in more fresh air and direct it towards the air filter, keeping a constant supply of cool air. Made from aluminium and finished in a high-quality black powder coated finish, the air feed also features a unique Pro Hoses silicone coupler to attach to the original air box inlet. The kit is a direct replacement that requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions. The result is an improved flow of fresh air to the intake and a more pleasing look to the engine bay. Features: Comprehensive air feed designed specifically for the Mk4 Focus ST platform Directs constant feed of cold air to the filter Fits with AIRTEC Motorsport enclosed induction kit or original air box Long lasting, high quality black powder coat finish Includes all fixtures and fittings Will fit both facelift & pre-facelift models. AIRTEC Part No: ATMSFO142

    £214.99

  • AIRTEC MOTORSPORT DOUBLE FRONT AIR FEED FOR FOCUS MK4 ST - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT DOUBLE FRONT AIR FEED FOR FOCUS MK4 ST

    As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our double front air feed for the pre-facelift (2019 to 2022) ST model suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a simple but effective double air scoop to mount behind the grille and replace the original, which only channels air through one side of the grille opening. Our direct replacement part feeds cold air through both sides of the grille, improving the flow of fresh air to the intake. The laser-cut scoops are made from lightweight aluminium and finished in a high quality powder coated black finish. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be and includes all fixtures and fittings, including instructions for a bolt-on installation. Please note: This item will not fit in conjunction with the AIRTEC Motorsport Mk4 Focus ST oil cooler kit Fits pre-facelift (2019 to 2022) models only Features: Comprehensive kit designed specially for the Mk4 Focus ST platform Scoop directs constant feed of cold air to the intake Designed and developed in the UK No cutting or drilling required to fit Bespoke laser-cut and powder coated scoops Includes all fixtures and detailed instructions AIRTEC Part No: ATMSFO135

    £132.25

  • FORD FOCUS ST MK4/MK4.5 | REVO PERFORMANCE PACK - Car Enhancements UK

    Revo FORD FOCUS ST MK4/MK4.5 | REVO PERFORMANCE PACK

    HARDWARE WILL BE SHIPPED FOR SELF INSTALL - SOFTWARE MUST BE INSTALLED AT OUR BRADFORD HQ Enhanced power delivery, unique safety features and exhilarating response at your disposal, the Revo Performance Pack delivers much more than peak power figures. Whatever drives you, the Revo Performance Pack has it all EVERYTHING YOU NEEDFOR THE POWER YOU CRAVE Enhanced power delivery, unique safety features and exhilarating response at your disposal, the Revo Performance Pack delivers much more than peak power figures. Whatever drives you, the Revo Performance Pack has it all. Engineered to perform, only Revo offers a complete tuning solution specifically designed for your vehicle. AIR INTAKE SYSTEM PERFORMANCESOFTWARE INTERCOOLER PIPE UPGRADE KIT INTERCOOLER     OPEN CONEAIR INTAKE SYSTEM Revo Open Cone Systems completely replace the OEM air intake for those who like to announce their vehicle is far from standard. Along with an aggressive intake sound, more air means access to more power throughout the rev-range. IncreasedDiameter DirectFlow PerformanceDesigned Learn more about this product PERFORMANCE ECU SOFTWARE Revo performance Software is designed to safely enhance the driveability of your vehicle, giving access to more power and torque throughout the rev range while maintaining the extensive factory safety mechanisms. Revo Software offers a perfect balance of performance, economy, longevity, and safety so you can drive harder, for longer. OBDII PortInstalled Vehicle HealthCheck Authorised DealerSet-up Read More     INTERCOOLER PIPE UPGRADE As well as the Intercooler, the Revo Performance Pack also includes the Intercooler pipe upgrade.  It reduces charge system resistance and improves flow over the restrictive stock pipework. Featuring fewer restrictions for smoother airflow, and optimised routing, the turbo meets less resistance and can perform more effectively. DirectReplacement IncreasedDiameter DirectInternals INTERCOOLER UPGRADE The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Unique design features lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software, ensuring you get consistent performance when you need it most. DirectReplacement UniqueFin Design MinimisedPressure Drop Learn more about this product     STOCK POWER280PS TORQUE410NM POWER410PS TORQUE590NM Find your nearest Revo Authorised Dealer Manufacturer Model Variant Engine Year Ford Focus MK4 ST 2.3 EcoBoost 2018-2022 Ford Focus MK4.5 ST 2.3 Ecoboost 2022 > Images shown are for illustration purposes only All Revo Software availability is ECU ID dependant. Upgrade pricing for existing Revo Stage 1 ECU customers.  Terms and Conditions apply.  Performance data is taken from 2019 MK4 Ford Focus ST. Pricing does not include the installation of parts, please contact your local Revo Authorised Dealer.

    £754.80 - £1,396.80

  • AIRTEC MOTORSPORT OIL COOLER KIT FOR FOCUS MK4 ST 2.3 - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT OIL COOLER KIT FOR FOCUS MK4 ST 2.3

    As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the ST 2.3-litre model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified Mk4 ST owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the upper grille area without obstructing the air intakes. As a result, our design includes a designated scoop on the left-hand side that supports the oil cooler and channels cold air towards the intakes. The package also includes an AIRTEC Motorsport oil cooler, bespoke laser-cut and powder coated brackets, high quality braided hose lines with Aerotec fittings, a thermostat-controlled sandwich plate and all fixtures and fittings, including instructions for a bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk4 Focus ST models. Features: Comprehensive kit designed specially for the Mk4 Focus ST platform Reduces temperatures on track and road Scoop directs constant feed of cold air to the intake Designed and developed in the UK No cutting or drilling required to fit Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Includes all fixtures and detailed instructions

    £429.92

  • FORD FOCUS ST MK4 | REVO INTERCOOLER - Car Enhancements UK

    Revo FORD FOCUS ST MK4/MK4.5 | REVO INTERCOOLER

    FORD FOCUS ST MK4 | INTERCOOLER Only The Driven know that the cooler the air, the more power produced. Revo Intercoolers drastically improve your vehicles ability to cool air compressed by the turbo. Increased volume and surface area, bar and plate cores with cast end tanks specifically designed to promote even air flow all play a part in lowering temperatures; without negatively affecting pressure. REVO INTERCOOLER FORD FOCUS ST MK4 2.3 ECOBOOST  The Revo Intercooler utilises unique design features to lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software. The unique end tank profile promotes internal laminar flow by decreasing turbulence and increasing airspeed and volume into the bar and plate core. This enhances charge air cooling giving you access to more power throughout the rev range. The limitations of the stock intercooler were apparent throughout testing with space being one of the largest factors when looking to improve over the stock unit. The stock part consistently struggled to manage charge air temperatures, especially on vehicles with performance software. The Revo Intercooler has been designed to improve on every restrictive element of the stock cooler, enhancing cooling efficiency by lowering intake air temperatures by up to 33.3ºC vs the Stock intercooler, allowing you to drive harder, for longer. KEY FEATURES Bar & plate core design Fully cast end tanks 20% Increased inlet and outlet diameter Intercooler pipes Included 13% increase in the frontal surface area 28% increase in core volume Complete OEM fitment, requiering no modification OEM VS REVO When you begin to enhance performance the restrictive OEM intercooler struggles to reduce intake temperatures and flow enough air, robbing the engine of power. One of the largest restrictions we found in the OE unit was the size of the inlet and outlet of the cooler, as you increase the power of the car the charge air temperatures increase, with the increase in charge air temperatures the OE unit starts to become a choking point and increases those temperatures further due to insufficient flow. The Revo Intercooler Kit removes the most restrictive elements, increasing the inlet and outlet sizes combined with a larger core, reducing intake air temperatures and promoting smoother airflow.  INCREASED CORE VOLUME The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your power demand. Designed from the ground up, the Revo Intercooler has a 28% larger core volume than the OEM part and offers perfect OE fitment with no modification to the bumpers or grill.  INCREASED FRONTAL AREA Due to the custom-designed end tanks, the frontal area of the intercooler has been increased by over 13%. Offering the best balance between increased performance and acceptable part clearance, whilst also minimising pressure drop. END TANK DESIGN The Revo end tank geometry maintains the largest possible cross-sectional flow area to and from the core. With a cast interior surface finish, the Revo end tanks allow air to flow freely without obstructions. The design has been balanced between core width and optimal tank profile design. The inlet and outlet sizes have been increased by 20% over the OE design allowing significantly more airflow and volume, reducing charge air temperatures. End tanks play an important part in maintaining pressure and work in harmony with the core to promote airflow, the Revo end tanks are designed to offer the optimal balance between both of these key features.   BAR & PLATE Designed with a bar and plate core to maximise the efficiency of heat transfer, the pressure drop is also controlled as the air meets less resistance compared to that of a tube and fin alternative. The Revo Intercooler also features carefully specified fin geometry to maximise cooling properties while minimising flow restriction. The ambient core side utilises louvred fins to slow ambient airflow which improves heat transfer, while the charge core side features an offset internal fin design to balance surface area and air resistance to minimise pressure drop.   INTERCOOLER PIPE UPGRADE Supplied with upgraded and increased sized 4 ply silicone hoses. The increased diameter silicone hoses allow for increased air volume to the cooler, reducing the heat build up the OE ones suffer at the inlet of the intercooler. The internal diameter of each silicone is precisely matched to the diameter of the Revo intercooler with unique Flush Fit design, allowing a smooth transition between components. RESEARCH AND DEVELOPMENT All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house Hub dyno and Revo data acquisition software. The Revo Intercooler minimises turbulence while maximising heat transfer, promoting cooler air temperatures and low-pressure drop. This helps retains power and torque throughout the rev range as highlighted during controlled Dyno testing. The Revo Intercooler was tested in-house to compare the performance against that of the stock Intercooler. First tested on a vehicle running the OEM intercooler with Revo Software and a Revo Open Cone Intake System, the Revo Intercooler and pipes were then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling. PERFORMANCE DATA Showing the last of six consecutive dyno runs, the efficiency of the Revo Intercooler over the OEM Focus ST intercooler is highlighted. With peak gains of +38 HP (hubs) & +45NM Torque, along with increased performance throughout the entire rev range averaging a gain of +8HP (hubs) and +10NM Torque.  The stock intercooler struggles to effectively cool the charge air due to the tube and fin design and restriction in the intercooler inlet and outlet sizes. The Revo cooler is able to cope with the demand far better retaining power even in the harshest of conditions where the OE unit starts to fail.   INLET TEMPERATURE This is a metric used to confirm the testing on the Focus MK4 ST intercooler. This is used to show that the air temperatures going into the intercooler were similar for each test, confirming that outlet temperatures shown in the following graphs are purely down to differences in intercooler design/construction. However in the case of the Focus MK4 ST OE cooler, due to inefficiency in the OE design of the charge pipes and cooler you can see that the starting temperature is higher from Run1 through to Run6. The main cause of this is again the inlet size of the intercooler and associated pipe work, these parts cause a choking point in the stock system increasing starting temps before they have even been cooled. With the increased size and flow characteristics of the Revo Intercooler and pipes the temperatures are significantly reduced prior to being cooled, a max reduction of 88.3°C and 21.7°C average over six runs. This indicates that the Revo kit can absorb much larger amounts of heat more efficiently than the OE setup, yet the Revo Intercooler produced the lower outlet temps proving the cooling efficiency. OUTLET TEMPERATURE This is the main performance metric to illustrate that the Revo intercooler far exceeds the stock unit. A strong indication that the Revo Intercooler is extremely resistant to heat soak and could likely continue for ten more sequential dyno runs before any significant intake temperature-related issues arose. The graph illustrates the increased cooling performance of the Revo Intercooler vs Focus ST intercooler over all six runs. The Revo Intercooler provided a massive 33.2°C max and 11.1°C average intake air temperature reduction across the six back to back full gear dyno runs, and yet even by the sixth run was still cooler than the starting run on the OE intercooler.  INTERCOOLER PRESSURE DROP GRAPH Pressure drop is an important factor when it comes to choosing an intercooler. The Revo solution features custom cast end tanks to evenly distribute air over the core. This graph highlights that even with the increased core size difference there is only a 0.09psi pressure drop in comparison to the stock intercooler, ensuring crisp engine response and minimal turbo lag.     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Ford Focus ST MK4 2.3 Ecoboost 2018 onwards   Notes: Simple replacement of the OEM part. Compatible with OEM Rest of World and US crash bars.  Please contact your local Revo Authorised Dealer for additional information and availability.

    £538.80

  • AIRTEC MOTORSPORT BIG BOOST PIPE KIT FOR FOCUS MK4 ST 2.3 - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT BIG BOOST PIPE KIT FOR FOCUS MK4 ST 2.3

    As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our big boost pipe kit for the ST suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original pipework to allow more flow and capacity whilst reducing restriction and improving response. AIRTEC Part No: ATMSFO132 TECHNICAL DATA As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our big boost pipe kit for the ST suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original pipework to allow more flow and capacity whilst reducing restriction and improving response. The comprehensive 11-piece kit features three pipes constructed from lightweight aluminium for improved strength so they will not fail with higher boost pressure, six Pro Hoses silicone joiners as well as two CNC-machined connectors to make fitting as simplistic as possible. On the hot side coming from the turbo, the original pipework is 55mm and features an indented section which restricts flow, where as our enlarged replacement kit features a 60mm internal diameter from start to finish with no restrictions. For the cold side to the throttle body, the original pipework begins at 55mm and tapers to 63mm in diameter, but out replacement features a 63mm internal diameter throughout, increasing both flow and capacity. The kit requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions. A must have for any modified Mk4 ST to help the improve the boost pipework’s flow and efficiency. Features: • Comprehensive 11-piece kit designed specifically for the Mk4 Focus ST• Larger internal diameter pipework offers improved flow• Lightweight aluminium construction for increased strength• Precision engineered CNC connectors• Comes complete with all fixtures and fittings   AIRTEC Part No: ATMSFO132

    £275.57

  • Prestone Ready To Use Coolant/Antifreeze (Can mix with any colour) - Car Enhancements UK

    Prestone Prestone Ready To Use Coolant/Antifreeze (Can mix with any colour)

      Prestone Ready To Use Coolant/Antifreeze 1ltr (Can mix with any colour) Prestone Antifreeze is a high quality, universal coolant suitable for various vehicles, cooling systems and can even mix with all existing antifreeze. The Ready to use mixture can be poured straight into an empty, or part filled system. Features:> Prevents overheating during the summer, and avoids freezing during the winter Can be used in ANY Passenger vehicle (Petrol or Diesel) Can be mixed with ANY existing colour antifreeze 5 Year guarantee Prestone 4ltr Ready to use Universal Antifreeze Prestone Antifreeze is a high quality, universal coolant suitable for varius vehicles, cooling systems and can even mix with all existing antifreeze. The Ready to use mixture can be poured straight into an empty, or part filled system. Features: - Prevents overheating during the summer, and avoids freezing during the winter - Can be used in ANY Passenger vehicle (Petrol or Diesel) - Can be mixed with ANY existing colour antifreeze - 5 Year guarantee

    £6.60 - £20.40

  • TRIPLE QX Blue Antifreeze/Coolant - Car Enhancements UK

    triple qx TRIPLE QX Blue Antifreeze/Coolant

    TRIPLE QX Blue Antifreeze/Coolant 1Ltr Our High quality Blue Antifreeze and Coolant has a powerful formula with 2 years protection for all seasons. It is suitable for any vehicle currently using Blue antifreeze / coolant and meets BC6589 (1992) Standard. Awarded BEST BUY by Car Mechanics Magazine based on heat / frost resistance and value for money! Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Blue Antifreeze/Coolant 5Ltr TRIPLE QX Blue Antifreeze/Coolant 20Ltr Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

    £30.00 - £88.74

  • TRIPLE QX Red (Concentrate) Antifreeze/Coolant - Car Enhancements UK

    triple qx TRIPLE QX Red (Concentrate) Antifreeze/Coolant

    TRIPLE QX Red (Concentrate) Antifreeze/Coolant 1Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard. recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 5Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard, incorporating the latest in Organic Acid Technology (OAT). Recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value. Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 20Ltr Why not buy 20 litres to save you having to keep ordering more! 1 x 20litres of Red Concentrate Antifreeze/Coolant

    £8.40 - £88.74

  • TRIPLE QX Purple Antifreeze/Coolant (G13) - Car Enhancements UK

    triple qx TRIPLE QX Purple Antifreeze/Coolant (G13)

    TRIPLE QX Purple Antifreeze/Coolant (G13) 1Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution.   TRIPLE QX Purple Concentrated Antifreeze/Coolant (G13) 5Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Purple Antifreeze/Coolant (G13) Concentrate 20Ltr Like to have a clean windscreen? Why not buy 20 litres to save you having to keep ordering more! Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

    £12.00 - £108.00

  • TRIPLE QX Purple (G13) (Ready Mixed) Antifreeze/Coolant - Car Enhancements UK

    triple qx TRIPLE QX Purple (G13) (Ready Mixed) Antifreeze/Coolant

    TRIPLE QX Purple (G13) (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements TRIPLE QX Purple Ready Mixed Antifreeze/Coolant (G13) 5Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

    £9.60 - £27.60

  • TRIPLE QX Blue Ready Mixed Antifreeze/Coolant - Car Enhancements UK

    triple qx TRIPLE QX Blue Ready Mixed Antifreeze/Coolant

    TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 1Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements. TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 5Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements.

    £6.30 - £24.00

  • TRIPLE QX Orange Concentrated Antifreeze/Coolant - Car Enhancements UK

    triple qx TRIPLE QX Orange Concentrated Antifreeze/Coolant

    TRIPLE QX Orange Concentrated Antifreeze/Coolant - 1ltr   TRIPLE QX Orange Concentrated Antifreeze/Coolant - 5ltr  

    £15.00 - £36.00

  • TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - Car Enhancements UK

    triple qx TRIPLE QX Orange Ready Mixed Antifreeze/Coolant

    TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 1ltr TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 5ltr Full organic long life coolant, 1-2-Ethanediol based Organic acid technology formula. Ethanediol based coolant, silicate, boron, phosphate, nitrite and amine free, which is a multipurpose long life formulation dedicated to engine which require . Dex-Cool coolant Recommended in engine cooling circuit which needs GM6277M norm   

    £12.49 - £29.00

  • TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant - Car Enhancements UK

    triple qx TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant

    TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection upto -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements. TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 5Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection up to -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

    £6.49 - £22.45

  • AIRTEC MOTORSPORT FRONT MOUNT INTERCOOLER FOR FORD FOCUS ST MK4 - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT FRONT MOUNT INTERCOOLER FOR FORD FOCUS ST MK4

    AIRTEC Motorsport Front Mount Intercooler Upgrade for Focus ST Mk4 Developed and manufactured at AIRTEC HQ in the UK, we’re proud to launch our front mount intercooler upgrade suitable for modified Mk4 Focus ST  models for track or fast road use. AIRTEC part number: ATINTFO55 TECHNICAL DATA AIRTEC Motorsport Front Mount Intercooler Upgrade for Focus ST Mk4 Developed and manufactured at AIRTEC HQ in the UK, we’re proud to launch our front mount intercooler upgrade suitable for modified Mk4 Focus ST  models for track or fast road use. With limited space available behind the front bumper arrangement of the Mk4 Focus model, our solution to increasing the intercooler’s size and performance is based upon our stepped-core design to fully utilise the area. The core steps from 85mm to 35mm and in doing so offers a huge increase in overall capacity in comparison to the original intercooler. It also offers a significant increase in frontal area over standard, which allows it to make the very most of the air flow provided. Together with our high-flow, moulded one-piece cast end tanks and an internal air diverter to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over the standard item. Despite this huge improvement, the kit fits neatly behind the original bumper and requires only minor trimming, and can be reverted back to standard with no issues. It attaches to the original boost pipes and the kit comes complete with fittings that allow the intercooler to simply and easily attach in place using our own design of billet mountings. The comprehensive fitting kit includes all the correct fixtures and fittings, as well as step-by-step instructions. The intercooler is available in a Pro-Series Black finish and with or without the AIRTEC logo. Specification:Height – 185mm Depth – 85mm/35mm step Width – 730mm Registered Design Right number:  AIRTEC part number: ATINTFO55

    £571.26

  • Gold Heat Resistant Wrap - Car Enhancements UK

    forge Motorsport Forge Motorsport - Gold Heat Resistant Wrap

    State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

    £27.51

  • AIRTEC MOTORSPORT UNIVERSAL OIL COOLER -8 OR -10 AN FITTINGS - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT UNIVERSAL OIL COOLER -8 OR -10 AN FITTINGS

    AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

    £140.33

Performance - Ford Focus MK4 (2018-Present)
Close